How Do I Install IS-FBS?

How Do I Install IS-FBS?
Oz-Post™ ISW-850 or IS-600
1.
Measure and locate where you
want posts for the fence. Drive OzPosts™ into the ground.
2.
3.
Clip fence brackets in the locations where the rails are to be installed.
4.
Make sure that the bracket is
parallel with the fence line before
attaching with the self drilling screw.
HINT: stretch a string line between posts and
clip the brackets at string line.
216 N. Interurban, Richardson, TX 75081
(T)1.866.422.0751
(F)972.644.3720
Attach posts to the Oz-Post™.
www.oz-post.com
1 of 4
How Do I Install IS-FBS?
IS-FBS
Tube
2x4 Rail
5.
(Top View, Standard fence line
installation)
6.
Install 2x6 “mud board”. The mud
board should be flush with the ground.
You may have to dig out areas that are
high. Attach the mud board with provided screws. It is recommended to
use pressure treated lumber for the
mud board because of its contact with
soil.
7.
8.
Install 2x4 rails to the fence
brackets. Measure between the posts
and cut to exact length. Attach the rails
with screws provided.
(Close up of Step 6)
216 N. Interurban, Richardson, TX 75081
(T)1.866.422.0751
(F)972.644.3720
www.oz-post.com
2 of 4
How Do I Install IS-FBS?
Top
Ca
p
Ext
en
de
Top Cap
r
2x6
Top
2x4
Mud Board
2x4 Rails
Ca
p
Ra
il
9.
Install top cap. A top cap is a
nice addition to your fence construction.
The top serves two purposes. It protects the fence pickets from water penetration in the end grain and it attaches
the posts and rails together to produce
a much stronger fence. Nail/screw the
top cap onto the rails every 12”. It is
best to use long lengths of 2x6 for the
top cap to maximize its effectiveness.
10. In this plan, the posts on the back
side of the fence require a top cap
extender. This gives a nice look and
keeps the cost of the top cap to a minimum. Alternatively, you could use a
wider top cap on the back fence line.
11. Install fence pickets. Push the
fence pickets flush with the top cap.
Attach with hardware at the 2x4 rails
and at the bottom on the mud board.
Make sure that the fence pickets are
raised up from the ground 2” to protect
them from ground contact.
12.
216 N. Interurban, Richardson, TX 75081
(T)1.866.422.0751
(F)972.644.3720
(Alternate view of finished fence)
www.oz-post.com
3 of 4
How Do I Install IS-FBS?
13.
14.
(Alternate view of finished fence)
(Alternate view of finished fence)
216 N. Interurban, Richardson, TX 75081
(T)1.866.422.0751
15.
(F)972.644.3720
(Alternate view of finished fence)
www.oz-post.com
4 of 4

Download Report