General Metalworking Machinery Flyer Fall/Winter 2014/2015

90-730 M1 - 7” x 10”
HORIZONTAL
METAL CUTTING
BANDSAWS
$1,489.
99
reg. $1,890.00
90-780 M1 - 8” x 12”
$1,699.99
reg. $2,100.00
Horizontal or vertical
cutting. Chip brush and
blade guard included.
Adjustable hydraulic down
feed control. Coolant system
with built-in tank and pump.
4-speed design: 86, 132, 178
& 260 fpm. 1 HP motor.
90-790 M1
$3,399.99
reg. $4,200.00
9” X 16” HORIZONTAL METAL
CUTTING BANDSAW
One-piece heavy-duty thick steel upper frame.
Welded one-piece base made of high-quality steel
with built-in coolant tank and recovery tray. Adjustable hydraulic down feed control. 4 blade speeds:
82, 132, 170 & 235 fpm. 1 ½ HP motor.
25-365 M1
90-740 M1
$2,249.99
90-665 M1
$449.
99
Horizontal or vertical cutting. Automatic shut off
at the end of cutting cycle. Adjustable tension
spring down feed control. 3-speed design: 80,
120 & 200 fpm. ½ HP motor.
reg. $6,200.00
reg. $2,725.00
reg. $595.00
4 ½” X 6” HORIZONTAL
METAL CUTTING BANDSAW
$4,999.99
7” X 10” SWIVEL HEAD METAL
CUTTING HORIZONTAL BANDSAW
Head swivels 0-45º on heavy-duty cast-iron
slides. Equipped with coolant system with
built-in tank and pump. Adjustable hydraulic
down feed control. 4 blade speeds: 73, 110, 150
& 217 fpm. 1 HP motor.
90-700 M1
$1,599.99
11” X 26”
VARIABLE SPEED
METAL LATHE
WITH STAND
26”distance between
centers. Easy to change
variable speed. Digital speed display. Pulley case
and chuck guard equipped with auto shut-off
switch. 50 to 2150 rpm variable speed. 2 HP motor.
95-600
95-860
$129.99
$249.99
6” CROSS VISE
6” INDUSTRIAL
BENCH VISE
90-805
$224.99
reg. $165.00
reg. $360.00
reg. $1,990.00
7” X 12” HORIZONTAL
METAL CUTTING
BANDSAW
Designed for both horizontal and
vertical cutting. Built-in coolant system.
Adjustable hydraulic down feed
control. Heavy-duty vise adjustable
from 45°-90°. Simple design speed
change lever. Automatic shut off at
the end of the cutting cycle. 3-speed
design: 85, 145, 180 fpm. 1 HP motor.
$132.99
reg. $265.00
reg. $180.00
HEAVY-DUTY
ROLLER STAND
WITH 2000 LBS
LOAD CAPACITY
95-990
10” INDUSTRIAL BENCH
VISE WITH SWIVEL BASE
Prices are in effect from November 1st, 2014
to March 30th, 2015
FALL / WINTER 2014-2015
Distributed by:
AT L A S M A C H I N E RY S U P P LY LT D.
233 Queen Street West, Toronto, Ontario M5V 1Z4
(416) 598-3553
www.atlas-machinery.com
We reserve the right to correct any typographical and pictorial errors without notice.
www.general.ca
60-350 M1
shown
60-250 M1
12” slow speed - 2 ½ HP
$2,199.99
15-870 M1 - 8”
$224.
reg. $275.
reg. $2,700.00
99
15-910 M1 - 10”
$369.
reg. $490.
00
99
00
15-920
$1,139.99
reg. $1,350.00
60-350 M1
14”variable speed - 3 HP
$4,299.99
12” HEAVY-DUTY
GRINDER WITH
FLOOR STAND
reg. $5,200.00
15-870 M1
shown
COLD CUT SAWS
Blade speed: 52 rpm (60-250)
/ 24 to 120 rpm (variable - 60350) – ideal for cutting ferrous
materials. Mitering capabilities - stops at 90°, 45° left
and 45° right. Coolant pump
system with high volume tank.
Magnetic switch with
overload protection.
60-355 - for 60-350
(14” x 120T)
99
$289.
reg. $430.
00
15-870 (8”) / 15-910 (10”)
Arbor speed: 3450 rpm (15-870) / 1725 rpm
(15-910). Permanently lubricated sealed
bearings. Wheel dresser included. Cast-iron
wheel guards and dust vents. 1 HP motor
(15-870) / 1 ½ HP motor (15-910).
60-255 - for 60-250
(12” x 180T)
75-875A M1
$4,389.99
99
$259.
reg. $370.
00
reg. $5,400.00
10-950 M1
$1,199.99
75-880A M1
$4,999.99
reg. $1,499.00
75-875A
Optional
hi-speed
steel blade
HEAVY-DUTY
BENCH GRINDERS
Permanently lubricated sealed bearings.
Magnetic 2-step safety
switch to prevent
unintentional startup
is equipped with an
extra-large easy access stop panel and
a lock-out key to prevent unauthorized use.
Heavy-duty stand with
water tray included.
1 ½ HP motor.
75-880A
reg. $6,250.00
GEARED HEAD
MILLING / DRILLING MACHINES
WITH STAND
1 1/2 HP METAL
DUST COLLECTOR
Non-sparking housing with easy-to-clean
collection drawers inside the cabinet. High static
pressure output for quiet and effective dust collection. Superior 3-stage 30 /5 / 1 micron filtration
system includes; pleated, carbon, and stainless
steel filters. Airflow capacity 755 cfm.
75-200RC M1
$549.
Head tilts up to 30º left and
90º right for angle drilling,
milling, slotting and more.
See-through swing-away
chuck guard with safety
Interlock – shuts off automatically when opened. R8
spindle with R8 / JT6 chuck
adapter included. R8 cutterhead adapter and R8 to JT6
chuck adapter included.
6 speeds: 60, 130, 230, 450,
800 & 1500 rpm.
1 ½ HP motor.
Head swivels 360º
(75-875A only)
34-156V M1
99
reg. $730.00
$1,799.
75-700 M1
99
reg. $2,190.00
$1,999.99
reg. $2,300.00
LINE INTERRUPTER
SWITCH
17” DRILL PRESS
/8” chuck with key, laser
pointer & see-through chuck
guard included. Rotating,
45° tilting, crank-operated
worktable with quick release
clamp. Forced opening line
interrupter switch, requires
machine restart in case of
power failure or circuit interruption. 12 spindle speeds:
340 to 2800 rpm. ¾ HP motor.
5
15” VARIABLE
SPEED DRILL
PRESS
See-through swing-away
chuck guard with safety interlock; automatically shuts off
the machine when the guard
is opened. The head can be
raised or lower on the column.
Variable speed from 400 to
5000 rpm. 1 HP motor.
17” ELECTRONIC
VARIABLE SPEED
DRILL PRESS
/4 ” regular chuck with key
included. Electronic inverter
variable control adjusts spindle
speed from 280 to 3200 rpm.
Solid head construction for accuracy and rigidity. Rack and
pinion table height
adjustment. 1 HP motor.
3

Download Report