JT65-HF Image Controller for the VIDEO I assume you have CQ100 Controller.exe file and PSK Image Fornt.exe file in the JT65-HF_Controller folder under the root directory at C drive. And you have rental sever with qsl.net as well. Then you install the JT65-HF Image Controller.exe as follows. A) Open the JT65-HF_Controller folder and find the FTP file then rename it as FTPa temporally. B) Then download the “JT65HF_Controller_04B_Oct_2014_setup.exe” file from http://jq1hdr.uzusionet.com/easypal_eng/jt65-hf/setup.html to the desktop of your PC and run it. C) Then you will have JT65HF_Controller.exe file and new FTP file at your JT65-HF_Controller folder. Delete new FTP file. Now, you have two executive files as CQ100 Controller.exe and T65HF_ Controller.exe at your JT65-HF_Controller folder. D) Then find the FTPa file which you renamed temporally and rename it as FTP again. Now, the FTP file dose work for both of CQ100 Controller and JT65-HF Controller. And you can run two program alternately. E) Try to compare the screen of CQ100 Controller and JT65-HF Controller. JT65-HF Controller CQ100 Controller 1 JT65-HF Controller CQ100 Controller I hope you will understand that the JT65-HF Controller may not work at your PC according to under some circumstances, hard security guards of the PC and other reason. If you can’t make check mark at “Who is on air” then the program is not working. As of October 10, 2014 Shu JA3GQJ 2