Productinformation 2014 Wheel measuring gauge for rail Type: HGE-WMR with HGE-DataManager Software Index of contents Wheel-Profile-Gauge Type HGE-WMR 1 HGE-DataManager © 4 Product overview / technical data 5 Futher products 6 Stand: 09.14 Measurement points on the wheel 1 Page 1 Wheel-Gauge Type HGE-WMR It is always important for a company to keep processes fast and easy to perform. If a measurement gadget is used, it has to be easy to use and should display exact measurement values. The Wheel-Gauge Type HGE-WMR is a valid measurement gadget to measure and to estimate train wheels. By small design it can be used in the smallest spaces between tracks and wheels. The measurement gadget is very stable, very light because it was made of aluminum, easy to use and can be handled by a single person. The mechanic transmitter is equipped with a wheel centering function and can be fixed with magnets on the wheel. This will permit a clear and fast measurement of the wear parts – Expenditure of time is less than a minute including spreading and removing. Another advantage of our concept is the hand-held computer PSION WORKABOUT which is combinable with a lot of gadgets offered by our company. You are able to connect our door-closing force measurement unit or our wheel distance measurement unit with the same hand-held computer, just like the transmitter of the Wheel-Gauge. The result is saving costs. E Herbert Gehrisch Elektrotechnik GmbH Value was set on a fast and easy measurement. The measurement data will be documented and shown optically on the screen of the handheld computer PSION WORKABOUT. The menu of PSION WORKABOUT was kept very simple so every user could handle it very fast. The user has a free selection of inputs like order-, vehicle- and bogie number, mileage of the vehicle, comments about wheel and vehicle and signature (touchscreen). In process of measurement you will get information about the minimal and maximal values. In event of a limit value being exceeded the user’s attention will be drawn with acoustic and optic signals to that fact. In the Vehicle overview the user has immediately a summery about the status of the measured wheels and the wheels going to be measured. If the wheel is okay, it will be fitted with a hook. Otherwise the wheel will be fitted with a cross. Regarded as a particular feature of our software we want to underline that an interrupted measurement could be continued at some other point of time. This is an advantage of our gauge so the user’s time and work plan are flexible. The PSION WORKABOUT has enough storage to save more than 1000 vehicle-measurements with 8 bogies. Seite 2 Page 2 Page 3 At the end of every single measuring process a detailed measurement report will be created. You can take a look at the report on the display of PSION WORKABOUT as well as on the computer. The report could be transferred to the computer in file formats PDF, Excel or MS Access and can be printed. Measurement report as PDF file Page 4 HGE-DataManager © The software HGE-DataManager © belonging to the wheel distance measurement device offers a quick and easy data transmission from the handheld PSION WORKABOUT to the user-PC. There is a choice between several database formats to store the measurement data (PDF, EXCEL and MDB). In addition to this, the HGE-DataManager © software provides information about the status of the accumulator and the remaining data storage of the handheld PSION WORKABOUT. Page 5 Product overview: Technical data measurement unit: Weight: ca. 1,1 kg Measurement uncertainty: e, h, qR: H0, S1, L: Measurement category: Name • Flange height • Flange thickness • qR—value • Wheel rim width • Hollow run • Double skin ± 0,075 mm ± 0,15 mm Code h e qR L H0 S1 Measuring range 24 - 40 mm 15 - 40 mm 4,5 - 15 mm 125 -150 mm -5 - 5 mm -5 - 9 mm Technical Data PSION WORKABOUT G3: • • • • • • Weight: ca. 455 g Touchscreen Display Processor: PXA 270 624 MHz (32 bit RISC) Storage: 1 GB Flash ROM, 256 MB RAM, 2 GB SD-Card Operating system: Microsoft Windows CE 5.0 Protection class IP 65 – survives several drops from 1,5m height to concrete. With bag (shoulder straps and belt clip) Wheel measuring gauge with case Weight: about.5 kg with docking station Delivery content: • Handheld Psion WORKABOUT with accumulator and 2 GB SD Speicherkarte • Measurement device • Connection cable • Docking station with power supply and data connection • USB connection cable from docking station to the PC • Manual for the handheld PSION WORKABOUT and the docking station • Manual „Closing force measurement device“ • Annex sheet: „Administrator indications“ • Installation CD with the HGE-DataManager Manual for the software supplied on the CD • Case for the device and the PSION WORKABOUT and accesories This project (Ha project no. 396/13-35) is funded in the framework of Hessen ModellProjekte, financed with funds of Europe Union (Europe Regional Development Fund—ERDF) and the state of Hessen. Page 6 Further Products: HGE– closing force measurement device with case Weight: about.5 kg with docking station Delivery content: • Handheld Psion WORKABOUT with accumulator and 2 GB SD Speicherkarte • Measurement device • Connection cable • Docking station with power supply and data connection • USB connection cable from docking station to the PC • Manual for the handheld PSION WORKABOUT and the docking station • Manual „Closing force measurement device“ • Annex sheet: „Administrator indications“ • Installation CD with the HGE-DataManager Manual for the software supplied on the CD • Case for the device and the PSION WORKABOUT and accesories Test rods according to DIN EN 14752 and VDV 111 with spring balance Test rods according to DIN EN 14752 and test rods according to VDV 111 to fulfill the requirements of the closing force measurements. • • • • • Test rod 1 (Test rod: 10 mm x 50 mm) Test rod 2 (Test rod: 30 mm x 60 mm) Test rod 3 Spring balance All test rods are also available separately Test rod 1 to review the anti clamp protection (10mm x 50mm) Test rod 2 to review the anti clamp protection at doors (30mm x 60mm) Test rod 3 to review the clamp detection Spring balance, , range to 200N Test rod to review force activated steps (Weight for step -150 N) Case for test rods 1 to 3 and the spring balance Page 7 Wheel Distance Measurement Unit Technical data of the unit • • • • • • • • • Weight: about 1250 g Size: length 1500 mm, Pipe diameter: 34 mm Measurement range: 1355 bis 1365 mm (Optional: other measurement ranges/length) Systematic error: ± 50 µm Repeatability/Precision: 20 µm Temperature range: -10°C to + 50°C Material: Aluminium/Carbon Measurement range from von 1355 mm to 1365 mm (Tolerances and critical values adjustable) - Optional: other measurement ranges/length • Highly durable and chrome-plated measurement sensor s (ball-shaped to suspend faults through dirt or rust) • Intuitive user-guided software (Software comparable to door closing force measurement) • Protocols can be signed on the device for an exact assignment to the auditor • PSION WORKABOUT usable for all HGE measurement devices • Material: aluminium and carbon fiber • Traceability of the measurement value to national reference standard (DIN EN ISO/IEC 17025) • German Railway certified This project (Ha project no. 396/13-35) is funded in the framework of Hessen ModellProjekte, financed with funds of Europe Union (Europe Regional Development Fund—ERDF) and the state of Hessen. Page 8 Im Jahre 2000 wurde uns der „Sonderpreis der hessischen Kreditinstitute“ für die Neuentwicklung des Radmessgerätes verliehen Herbert Gehrisch Elektrotechnik GmbH Nibelungenstraße 784 D-64686 Lautertal Tel.: +49 (0)6254 7025 Fax: +49 (0)6254 37297 E-Mail: [email protected] Web: www.gehrisch.de We reserve all rights in this document and in the subject matter and illustrations contained therein. Lending or copying any part or the complete manual or its contents as well as the software belonging to it is only possible with the written permission from HGE. We reserve the right of error and technical modifications. . ©2013, Herbert Gehrisch Elektrotechnik GmbH, all rights reserved.
© Copyright 2024 ExpyDoc
