Learn More - Matthews Cremation

IEB Series 8
Pet Cremation System – “The Basic Essentials”
Cremation Rate:
75 lbs (34 kg) per hour
Safe Load Capacity:
200 lbs (90 kg)
Operation:
Individual or Communal Load
The IEB-8 is an entry level
system for beginning businesses
that expect their volume to
remain relatively low (up to
1,000 pets per year). This
cremator is perfectly suited for
individual pet cremations as well
as performing small volumes
of communal cremations. The
cremation chamber will accept
small to medium size animals
up to 200 lbs in total weight
and our Smoke-Buster™ multichambered architecture system
will provide smokeless and
odorless operation.
FEATURES & SPECIFICATIONS
Specifications:
Model IEB-8 Pet Cremation System
• Overall Height: 8’4” (2.54 m)
• Overall Width: 6’5” (1.96 m)
• Overall Length: 8’3” (2.51 m)
• Weight: 14,000 lbs (6350 kg)
• Fuel: Natural or LP Gas (Oil Available)
• Electrical: 2
20 Volts, 1-Phase or 3-Phase
• Control Panel: B
asic PLC Control Panel can
be located right or left side,
or remotely
• Cremation Burners: 1
• Secondary Burners: 1
Performance:
• 75 lbs/hr (34 kg/hr)
• 200 lbs (90 kg) Safe Load Capacity
• Individual or Communal Load Operation
Equipment Features:
• Stainless Steel Exhaust Stack – No Maintenance
Non-Corrosive shell with 3” (76.2 mm) refractory lining
for strength, durability and safety.
• Stainless Steel Draft Nozzle – Insures proper flow of
combustion gases during the cremation process.
• Operating Controls – Our basic Touch-Screen Panel,
PLC based controls simplify and completely
automates the operation of the cremator for
your equipment operator.
• Loading Door with Sentry Door Locks –
The manual counterweight design locks and seals tightly
for safe, convenient operation. Provides an extra
measure of safety for your equipment operator.
• Round Arched Ceiling – Superior structural
integrity, low maintenance, long life
• Integral Retrieval System – Retrieval of cremated
remains is quick and safe with the convenient
collection hopper.
• Wall Construction & Insulation Thickness –
Multi-material design that is 12” (304 mm) thick
provides ultimate durability and thermal efficiency.
• SmokeBuster Architecture – Oversized after-chamber
and cremation chambers ensures maximum combustion
of smoke and odor.
• Cremation Chamber Floor (Hearth) – Our unique
“Hot Hearth” design eliminates fluid runoff, provides
quicker cremation time and minimizes fuel consumption.
• UL Listed – Entire system tested and approved
for safety. The IEB-8 is pre-wired, pre-piped &
pre-tested prior to shipment, simplifying the
installation procedures.
2045 Sprint Boulevard, Apopka, FL 32703
Toll Free: 1-888-589-6197 • Fax: (407) 886-5990
www.MatthewsCremation.com
HMC ENG 04/13

Download Report