Catalog

FLOW
TRANSMITTERS
AW COMPANY
ELECTRONICS FOR
INSTRUMENTATION
The HPM Series
When a high degree of accuracy is required
POSITIVE DISPLACEMENT FLOW METERS
The HPM Series of positive displacement, spur gear flow meters are ideally suited
for multi-viscosity fluid measurement. The principle of operation is similar to that of a
gear pump, but in reverse - instead of the gears driving the medium, the medium drives
the gears. Each meter is constructed of stainless steel and tungsten carbide, which
allows the HPM to be used with aggressive fluids as well as fluids under high pressure.
The rugged design ensures a long operating life and regular recalibration is not required
for normal operating conditions. A factory calibration is included with each meter to
ensure an accuracy of ±0.5% across the entire flow range. Repeatability is 0.01% with
excellent low flow resolution. High precision at low flow rates, combined with rugged
durability and easy maintenance are the distinguishing features of this flow meter.
APPLICATIONS
Paints 6 Coatings 6 Oils 6 Additives 6 Sealants
Polyurethanes 6 Adhesives 6 Chemicals 6 Lubricants
8809 Industrial Drive, Franksville, WI 53126-9337
Tel
el: 262-884-9800 Fax
ax:262-884-9810
E-Mail
E-Mail: [email protected] Web
Web: http://www.awcompany.com
Company representatives are available for consultation
Products may be subject to change without notice
The HPM flow meter is available in two versions - the HPM and the HPM-SLG. The standard HPM
is usually recommended for solvent-based paints and coatings, lubricants, hydraulic oils, adhesives,
sealants, resins and isocyanates. The HPM-SLG series is designed for waterbased paints and coatings.
Its smaller body and lighter construction also make it well suited for tight spaces or robotic arms.
Impulses
per Gal.
Impulses
p er cc
R an g e
GPM
HPM-15
31,000
8.20
0.01 to 0.5
3.33
HPM-20
15,900
4.20
0.02 to 2.0
HPM-30
6,600
1.74
HPM-15 SLG
31,000
HPM-20 SLG
15,900
Model
Dia. Hgt.
(In) (In)
Port
(In)
Adaptor
Filtration
micron
PSI
Weight
(lb)
2.00
¼" BSP
¼" NPT
120
5,000
5.5
3.33
2.16
¼" BSP
¼" NPT
120
5,000
6.5
0.1 to 7.0
3.33
2.63
¼" BSP
¼" NPT
120
5,000
10.5
8.20
0.01 to 0.5
3.33
1.38
c" BSP
120
500
2.5
4.20
0.02 to 2.0
3.33
1.65
c" BSP
Consult
Factory
Consult
Factory
120
500
3.0
Sensor Options
Fiber Optic System FOP 30/S
CAPM-3o
Fiber Optic System FOP 20/S
CAPM-3o
HPM-SLG
Standard HPM Series
CAPM-2o
CAPM-10 High Temperature Pickup
CAPM-2
CAPM-2o
Intrinsically safe pickup
on HPM Series
Use up to 400° F
The CAPM-2, 3 and 10 are carrier frequency sensors that produce a square wave pulse with a 50%
duty cycle. The CAPM-2o and CAPM-3o versions are UL approved as intrinsically safe for use in Class 1,
Div. 1 areas. The CAPM-10 is recommended for high temperature conditions. The FOP-20 and 30 are
UL approved, fiber optic transmitters suitable for Class 1, Div. 1 environments and electrostatic
applications. Both are battery powered, with a life expectancy of 5-8 years, depending on usage.
Standard fiber optic cable lengths are 30, 45, 60 and 100 ft.
Model
Flow Meter
Supply
Output Voltage
Temperature
CAPM-2
CAPM-2o
CAPM-3
HPM & SLG
HPM & SLG
S LG
10 to 30 VDC
10 to 30 VDC
10 to 30 VDC
Supply less 1.5V
Supply less 1.5V
Supply less 1.5V
-60° F to 185°F
-60° F to 185°F
-60° F to 185°F
Standard
Intrinsically Safe
Standard
CAPM-3o
CAPM-10
FOP-20
S LG
HPM & SLG
HPM & SLG
10 to 30 VDC
10 to 30 VDC
Battery
Supply less 1.5V
Supply less 3.0V
Supply less 1.5V
-60° F to 185°F
-60° F to 400°F
95° F
Intrinsically Safe
High Temperature
Fiber Optic
S LG
Battery
Supply less 1.5V
95° F
FOP-30
Type
Fiber Optic
Hpm.p65 Updated 08/01
AW COMP
ANY
COMPANY
8809 Industrial Drive, Franksville, WI 53126-9337
el: 262-884-9800 Fax
ax: 262-884-9810
Tel
E-Mail
E-Mail: [email protected] Web
Web: http://www.awcompany.com

Download Report