MTP potentiometer Potentiometer for external setting of controllers with 0-10 V input and voltage supply Us (max.12 VDC/1 mA). The desired output voltage is adjusted steplessly from 0 to supply voltage V by the rotary button. Additional switch function e.g. for controller enable on/off. Can be used for inset mounting as well as for surface mounting. F e a t u r es Resistor 10 kΩ (-20 % / +20 %) Switch rating: 4 A/250 VAC-10 A/12 VDC Interference emission in accordance with EN61000-6-3/Interference immunity in accordance EN 61000-6-2 Inset mounting IP44/surface mounting IP54 Enclosure external: plastic, ASA, RAL 9010 white-ivory/internal: polyamide according to IEC 60335 Max ambient temperature: 35 °C Wiring diagram Us + OUT + GND Us OUT - GND supply voltage (max.12 VDC/1 mA) output voltage 0…Us (max. output voltage depends on applied supply voltage ‘Us’) ground - 0-Us control signal max. 4 A/250 Vac 10 A/12 Vdc max. 12 Vdc/1 mA D i me n s i o n s & f i x i n g order code MTP-X10K-NA net weight gross weight 140 g 165 g 07/03/2014 S.2.3.M.2 148
© Copyright 2025 ExpyDoc
![Era Series [Innovative] [F] [Converted].ai - dtp.co.th](http://s3.expydoc.com/store/data/000606526_1-addfffaacb444e21fda50388de95ea70-250x500.png)
