IMZ® Non-Hex 3.3 & 4.0 To The Implant Direct Compatible Components Titanium Posts Ti-Blocs TITANIUM POSTS titanium tapered posts can be altered like a preparation. Fabricate a soft tissue model whenever preparations are made in the laboratory. The direct titanium abutment posts screw into the implant body and are indicated for Bridge Restorations only. They may be secured with Teflon tape or thread adhesive. The 3.3 A 4.0 A SD Small Implant Diameter IMZ 3.3 MD Medium Implant Diameter IMZ 4.0 SD MD 3.3 4.0 Order # Order # Direct Titanium Posts (A) 56-301200 56-401200 USE WITH: Impression Coping Implant Body Analog 56-300080 56-300015 56-400080 56-400015 Description REQUIRES .050" HEX DRIVER: DDS .050" Hex Driver Lab .050" Driver BIO-TORQ Tip Hex .050", Short (Use with Bio-Torq Wrench) BIO-TORQ Tip Hex .050", Long (Use with Bio-Torq Wrench) 11-000007 11-000006 59-100120 59-100125 TI-BLOC The titanium bloc screws into the non-hexed IMZ implant body and may be secured with Teflon tape or thread adhesive. The Ti-Bloc requires more preparation as it is a true cylindrical bloc. However, the Ti-Bloc can be prepared like a .050" hex A posterior prep, thereby increasing the esthetics and comfort. It can also be prepared to correct for divergency. Insertion requires .050" hex driver. .050" hex B SD MD 3.3 4.0 Description Dimensions Order # Order # Ti-Bloc 3.3 small (A) Ti-Bloc 4.0 small (B) ø=4.7mm ø=5.0mm 56-301210 — — 56-401210 56-300080 56-300015 56-400080 56-400015 USE WITH: Impression Coping Implant Body Analog REQUIRES .050" HEX DRIVER: DDS .050" Hex Driver Lab .050" Driver BIO-TORQ Tip Hex .050", Short (Use with Bio-Torq Wrench) BIO-TORQ Tip Hex .050", Long (Use with Bio-Torq Wrench) All product names referenced herein are trademarks of their respective companies, refer to inside back cover of this manual. © Copyright 2010 Attachments International, Inc., Burlingame, CA 11-000007 11-000006 59-100120 59-100125 256 To Order: 800-999-3003 • 650-340-0393 Additional Information: www.attachments.com