Solar Technology - WATTS industries

Solar Technology
Advantages
• Everything from a single source
• Compact and modern design
• Customized models on request
2
Innovative Products
For Your Success
Watts Industries Deutschland GmbH · Division: Watts Dumser OEM
Godramsteiner Hauptstraße 167 · 76829 Landau · Germany
Phone +49 63 41 96 56-0 · Fax +49 63 41 96 56-3 40
E-mail [email protected] · Internet www.wattsindustries.com
PRODUCT PHILOSOPHY
Value Added Stimulated By Creativity
The skills and resources of the companies in the Watts Group has generated major innovation potential
that also benefits you, the customer. The following pages profile some of our product ideas.
1. MODULES FOR SOLAR ENERGY SYSTEMS
2. FITTINGS FOR SOLAR ENERGY SYSTEMS
3. SYSTEM SEPARATORS
4. HEATING CIRCUIT UNITS
5. SAFETY ASSEMBLIES
3
SOLAR TECHNOLOGY
4
FlowBox SolarControl module
Ready-to-mount, compact module for solar energy systems; low overall height of 350 mm;
recirculation pumps with an overall length of 180 mm; wired ex works; FlowGuard balancing valve; safety assembly with pressure gauge, safety valve and fill-and-drain valve; wall
bracket for expansion tank incl. corrugated hose for connection of diaphragm expansion
tank; gravity flow stop can be suppressed by turning the valve handle to the 45° position;
thermometer integrated in the multifunction shut-off valve; connection points equipped with
solar-compatible flat seals; heat insulation cladding made of EPP with patented snap seam
fitting. Wide range of solar control modules. Use of special solar pumps possible on request!
Type
SV 6 bar
SV 6 bar
Grundfos UPS 25-60; 2 - 16 l/min
Grundfos UPS 25-60; 4 - 36 l/min
Article no.
3502400
3502405
PU* PQ**
1
pc.
1
pc.
FlowBox Solar module
Ready-to-mount, compact module for solar energy systems; low overall height of 350 mm;
recirculation pumps with an overall length of 180 mm; wired ex works; FlowGuard balancing valve; safety assembly with pressure gauge, safety valve and fill-and-drain valve; wall
bracket for expansion tank incl. corrugated hose for connection of diaphragm expansion
tank; gravity flow stop can be suppressed by turning the valve handle to the 45° position;
thermometer integrated in the multifunction shut-off valve; connection points equipped with
solar-compatible flat seals; heat insulation cladding made of EPP with patented snap seam
fitting. Use of special solar pumps possible on request!
Type
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 8 bar
SV 8 bar
SV 8 bar
SV 8 bar
Wilo RS 25 / 4-3; 0.5 - 6 l/min
Wilo RS 25 / 6-3; 0.5 - 6 l/min
Grundfos UPS 25-40; 0.5 - 6 l/min
Grundfos UPS 25-60; 0.5 - 6 l/min
Wilo RS 25 / 4-3; 2 - 16 l/min
Wilo RS 25 / 6-3; 2 - 16 l/min
Grundfos UPS 25-40; 2 - 16 l/min
Grundfos UPS 25-60; 2 - 16 l/min
Wilo RS 25 / 6-3; 4 - 36 l/min
Grundfos UPS 25-60; 4 - 36 l/min
Grundfos UPS 25-80; 4 - 36 l/min
Wilo RS 25 / 4-3; 2 - 16 l/min
Wilo RS 25 / 6-3; 2 - 16 l/min
Grundfos UPS 25-40; 2 - 16 l/min
Grundfos UPS 25-60; 2 - 16 l/min
Article no.
on request
on request
on request
on request
3499000
3499020
3499040
3499045
3499030
3499035
3499037
3499540
3499550
3499560
3499570
PU
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
PQ
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
FlowBox Solar Single module
Ready-to-mount, compact return branch module; recirculation pumps with an overall
length of 180 mm; wired ex works; FlowGuard balancing valve; safety assembly with
pressure gauge, safety valve and fill-and-drain valve; wall bracket for expansion tank incl.
corrugated hose for connection of diaphragm expansion tank; gravity flow stop can be
suppressed by turning the valve handle to the 45° position; thermometer integrated in the
multifunction shut-off valve; connection points equipped with solar-compatible flat seals;
heat insulation cladding made of EPP with patented snap seam fitting. Use of special solar
pumps possible on request!
* PU = packaging unit,
** PQ = pricing quantity
Type
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 6 bar
SV 8 bar
SV 8 bar
SV 8 bar
SV 8 bar
Wilo RS 25 / 4-3; 0.5 - 6 l/min
Wilo RS 25 / 6-3; 0.5 - 6 l/min
Grundfos UPS 25-40; 0.5 - 6 l/min
Grundfos UPS 25-60; 0.5 - 6 l/min
Wilo RS 25 / 4-3; 2 - 16 l/min
Wilo RS 25 / 6-3; 2 - 16 l/min
Grundfos UPS 25-40; 2 - 16 l/min
Grundfos UPS 25-60; 2 - 16 l/min
Wilo RS 25 / 4-3; 2 - 16 l/min
Wilo RS 25 / 6-3; 2 - 16 l/min
Grundfos UPS 25-40; 2 - 16 l/min
Grundfos UPS 25-60; 2 - 16 l/min
Article no.
on request
on request
on request
on request
on request
on request
on request
on request
3499500
3499510
3499520
3499530
PU
1
1
1
1
1
1
1
1
1
1
1
1
PQ
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
SOLAR TECHNOLOGY
5
Vent pipe for FlowBox solar modules
Vent pipe for the FlowBox SolarControl and FlowBox Solar modules with blockable rapid
vent device or manual vent valve.
Type
Vent pipe with rapid vent device
Vent pipe with rapid vent device
Article no.
on request
on request
PU
1
1
PQ
pc.
pc.
QuickFill
Purging, filling and draining unit for direct installation in the circuit to be purged. Short
overall length; universal connection options; any desired installation position.
Type
DN 10
Thread*: 3/4“ eurocone
Connection Cu-KVSR 12x1
DN12
Thread*: 3/4“ eurocone
Connection Cu-KVSR 15x1
DN15
Thread*: 3/4“ eurocone
Connection Cu-KVSR 18x1
DN20
Thread*: M28x1.5
Connection Cu-KVSR 22x1
DN15
Thread*: 3/4“ eurocone
DN20
Thread*: 1“ male
*Male thread, ISO 228, KVSR = Compression fitting
Article no.
3499610
PU
1
PQ
pc.
3499615
1
pc.
3499620
1
pc.
3499635
1
pc.
3499625
3499630
1
1
pc.
pc.
Cap valve in acc. with DIN 4751
for testing diaphragm-type expansion tanks without draining the system and removing the
tank, made of brass MS 58, with drain tap and lead-sealing set, rated pressure PN 10,
max. operating temperature 130 ºC.
Type
KAV 20
KAV 25
KAV 32
SP/KAV
*** Carton
3/4“ x 3/4“
1“ x 1“
1 1/4“ x 1 1/4“
10 lead sealing inserts
Article no. PU*** PQ
0608120
5
pc.
0608125
5
pc.
0608132
1/5
pc.
0699033
1
pc.
Thermostatic service water mixer
with 2 integrated check valves, adjusting range 30 - 65 ºC, for PN 10 service water
systems, as scald protection, housing made of brass, max. hot water feed 90 ºC, with
connection screw devices.
Type
MMV 15
MMV 20
1/2“
3/4“
Article no.
0559115
0559120
PU
1
1
PQ
pc.
pc.
SOLAR TECHNOLOGY
6
SOLAR safety valve
made of hot-pressed brass, CW617N, rotary cap made of high-grade, impact-resistant and
temperature-resistant plastic, spring made of steel, hot water-resistant diaphragms and
gaskets, suitable for water, water-glycol mixtures and neutral non-adhesive liquids, max.
operating temperature 160 ºC, connections 1/2“ x 3/4“, type-tested, code letter SOL.
Type
SV/E15
SV/E15
SV/E15
SV/E15
SV/E15
SOL
SOL
SOL
SOL
SOL
3.5
4.0
6.0
8.0
10.0
3.5 bar
4.0 bar
6.0 bar
80 bar
10.0 bar
Article no.
0215835
0215840
0215860
0215880
0215899
PU
30
30
30
30
30
PQ
pc.
pc.
pc.
pc.
pc.
SOLAR rapid vent device
for installation in thermal solar systems; housing made of hot-pressed brass, CW617N,
mechanical parts made of high-grade, impact-resistant and temperature-resistant plastic,
resistant to water, water-glycol mixtures and neutral non-adhesive liquids; max. operating
temperature 160 ºC.
Type
MV10 SOL
MV15 SOL
Connection thread 3/8“
Connection thread 1/2“
Article no.
0249110
0249115
PU
10
10
PQ
pc.
pc.
Article no.
0259310
PU
10
PQ
pc.
Shutoff valve
for SOLAR rapid vent devices.
Type
RIA 10 – SOL
3/8“
SOLAR ball valve
all-round applications in sanitary, solar and heating systems, self-sealing 1/2“ connection,
full passage, PN 20, hot-pressed brass, MS 58, with hose screw connection, with KTWtested gaskets for use up to max. 160 ºC.
Type
KFE15SD UNI
Article no. PU
PQ
0553615 10/100 pc.
SOLAR TECHNOLOGY
7
SOLAR rapid coupling
for testing and changing expansion tanks without draining the system; for modules for
solar energy systems, temperature range to max. 160 ºC.
Type
SK20/160-SOL
Article no. PU
PQ
0608102 10/100 pc.
SOLAR expansion tank
To hold the extra volume resulting from the heating process; prevents run-off via the safety
valve, with nitrile diaphragm, inlet pressure 2.5 bar, max. temperature 99 ºC, connection
3/4“, max. operating pressure 8.0 bar.
Type
EG12-SOL
EG19-SOL
EG25-SOL
EG40-SOL
12
19
25
40
Article no.
0602012
0602019
0602025
0602040
l
l
l
l
PU
1
1
1
1
PQ
pc.
pc.
pc.
pc.
WATT FLOW balancing valve
Precision regulation of the flow volume with angle seat valve. Indication of current flow
volume. Large indicating range: Vmax/Vmin = 8:1 No diagrams or measurement interface
required. Any desired installation orientation. Short overall length. No correction values
required for water-glycol.
Type
SRV15-1“AG
SRV15-1“AG
SRV20-1“AG
SRV15-22KVSR
SRV20-22KVSR
Indicating
Indicating
Indicating
Indicating
Indicating
range
range
range
range
range
0.5 - 7 l/min
2 - 16 l/min
4 - 36 l/min
2 - 16 l/min
4 - 36 l/min
Article no.
3498300
3498305
3498310
3498335
3498340
PU*
1
1
1
1
1
PQ
pc.
pc.
pc.
pc.
pc.
WATT FLOW balancing valve
Precision regulation of the flow volume with angle seat valve. Indication of current flow
volume. Large indicating range: Vmax/Vmin = 8:1 No diagrams or measurement interface
required. Any desired installation orientation. Short overall length. No correction values
required for water-glycol. With „Memostop“ for fixing of pre-adjusted setting via double
spindle.
Type
SRV 25 – AG
SRV 32 – AG
SRV 25 – IG
SRV 32 – IG
SRV 40 – IG
SRV 50 – IG
DN 25 - 1 1/4“ male,
Indicating range 5 - 50 l/min
DN 32 - 1 1/2“ male,
Indicating range 10 - 80 l/min
DN 25 - 1“ female,
Indicating range 5 - 50 l/min
DN 32 - 1 1/4“ female,
Indicating range 10 - 80 l/min
DN 40 - 1 1/2“ female,
Indicating range 15 - 120 l/min
DN 50 - 2“ female,
Indicating range 20 - 200 l/min
Article no.
3498345
PU
1
PQ
pc.
3498350
1
pc.
3498355
1
pc.
3498360
1
pc.
3498365
1
pc.
3498370
1
pc.
Product range Watts Industries
System Disconnectors
Backflow Protection Devices
Check Valves
Safety Units
Safety Relief Valves
Pressure Reducing Valves
Automatic Control Valves
Butterfly Valves
Measuring Gauges
Temperature Control
Expansion Vessels
Process Switches
Fuel Products
Gas Products
Electronic Controls
Installation Protection Products
Radiator Valves
Manifolds & Fittings
System Products
Shut-Off Valves
Watts Industries Deutschland GmbH · Division: Watts Dumser OEM
Godramsteiner Hauptstraße 167 · 76829 Landau · Germany
Re-order no. 82-DE/1-UK-04/12
Phone +49 63 41 96 56-0 · Fax +49 63 41 96 56-3 40
E-mail [email protected] · Site www.wattsindustries.com

Download Report