installation KKM/KIM LongLine

INSTALLATION INSTRUCTIONS
KRAIBURG KKM LongLine / KIM LongLine /
KE LongLine
prerequisites:
for animal well-being some
litter is necessary to absorb
moisture (e.g. soft milled
straw or mineral material)
mats:
even temperature: minimum
5° C to maximum 30° C
(store according to initial
temperature)
concrete area:
• smoothed
• clean
• with at least
3 % slope
You will need this:
measuring:
cutting:
marking:
or
or
drilling and installing:
KRAIBURG
fastening elements:
• nail plugs ø 10 x 80 mm - A2
or
• washers ø 30 mm - A2
or
(or fastening elements with at least the
same resistance and durability)
1
Roll out continuous rolls
chamfer
rear concrete edge:
minimum 3 cm distance!
2
Fastening
start in the middle and alternately work towards the right and to the left
fasten at the front edge through the
prefabricated fastening points:
If there are no fastening points, fasten at the
front approx. every 40 cm, with a distance
of 5 cm from the edge
drilling
Appropriate installation may differ due to local conditions.
Therefore the manufacturer is not liable for installation!
pound the
plastic plugs
in flush
pound in nails
and washers
until they are
seated evenly
fast and are
slightly
countersunk
09/2013
Legal basis is the German version of the document.
Gummiwerk KRAIBURG Elastik GmbH & Co. KG, Göllstr. 8, 84529 Tittmoning, Germany
Tel. +49/8683/701-303, Fax +49/8683/701-190, e-mail: [email protected], www.kraiburg-elastik.com

Download Report