P R O D U C T D ATA Local Equipment Room AXON supplies a wide range of integrated, LERs for hosting control system equipment, consoles, cabinets and HVAC. We also have the capability to interface a large array of third party equipment and control systems. Moreover, our self-supporting LER structures are manufactured with special considerations in regards to safety, hazardous area classifications, working environment, environmental conditions, and installation. AXON’s goal is to deliver superior, fit-for-purpose designs to provide you with consolidated LER solutions for both operational and maintenance purposes. FEATURES / BENEFITS Design n Specifically designed to allocate electrical devices for drilling equipment control and data acquisition n All-inclusive, single unit easily accommodates and integrates large array of equipment n Self-supporting structure includes noise and vibration considerations/restrictions n Technical standards and certifications per prevailing regulations (NPD, NORSOK, ATEX for Hazardous Zone, ++) n Rugged design, construction and layout in complete compliance with the current revision of the National Electric Code (NEC) n Can be lockable/securable such that access is limited to appropriate parties n Electrical equipment accessible from egress corridor, as well as building exterior (if appropriate) n Equipment room doors are rated A60, only open outward, and are provided with quick abandon bar for fast and easy opening Layout n Customized based on space optimization and efficiency with a balanced weight distribution and the customer equipment layout (including supporting services of HVAC, lighting, low voltage supply, and 3rd party interfaces) n Dimensions and layout designed to ensure all electrical equipment components (such as transformers and medium voltage switches) can be conveniently accessed for inspection and/or maintenance and can be conveniently removed for repair or replacement n Internal design and layout provides exterior access openings to accommodate removal of partial or all equipment assemblies for repair or replacement n Electrical room designed for ease of expansion with bottom/lateral access for wiring and cables through classic gland type cable entry or RoxtecTM entry system 8909 Jackrabbit Road Houston, Texas 77095 P 281.855.3200 axonep.com 2 1 2 Local Equipment Room 3 1 E E DRILL FLOOR SIDE [573-GI-001] [573-GI-002] RESERVED SPACE FOR ACCESS TO DERRICK LADDER AND MAST PLUGBOARD [931-EX-003] RESERVED SPACE FOR ACCESS TO DERRICK LADDER AND MAST PLUGBOARD [931-EX-003] [573-GI-001] Dimensional Data DRAWWORKS SIDE DRAWWORKS SIDE2 1 OFFBOARD SIDE HVAC UNITS HEATING, VENTILATION AND AIR CONDITIONING FRESH AIR INTAKES DRILLSIDE FLOOR SIDE OFFBOARD 201 201 200 VIEW FROM DRAWWORKS DRAWWORKS SIDE 105 236.63 236.63 RESERVED SPACE FOR ACCESS TO DERRICK LADDER AND MAST PLUGBOARD [931-EX-003] VIEW FROM OFFBOARD E FRESH AIR INTAKES 200 V-DOOR SIDE CABLE TRANSIT CABLE TRANY ROOF ACCESS LADDER SCALE 1:100 F E D C B A 6 5 4 1 120.00 128.00 3 2 No. - No. - DRAWING No. - REV. DESCRIPTION DIMENSIONS - ARE IN INCHES REFERENCE DRAWINGS SCALE 1:100 1 REFERENCE DRAWINGS DRAWING No. 9 8 REV. REV. DESCRIPTION 1 Additional Images 5 4 3 2 1 - No. DRAWING No. - REV. B DATE DESCRIPTION F E D C B A 12/09/13 11/26/13 - REV. DATE REFERENCE DRAWINGS 1 CKED BY NEERED BY ROVED BY NT APPROVAL MMA 5/31/13 MMA 5/31/13 JSA 5/31/13 JSA 5/31/13 - - MMA MMA MMA MMA MMA MMA A MMA MMA MMA MMA MMA MMA DESCRIPTION UHF INTERFACE PANEL REMOVED BY DSIC LAYOUT UPDATE AS PER DSIC TRANSMITTAL 0826-DS-0441 LAYOUT UPDATED As per ARCD Trans. 826-ADP-010 As per ARCD Trans. 826-ADP-003 ISSUED FOR APPROVAL REV. BY APPVD. APPVD. REVISIONS 2 NOTICE OF HOUSTON, CONFIDENTIALITY 8909 JACKRABBIT ROAD, TX 77095 DESCRIPTION 3 DRAWN BY CHECKED BY DRAWN BY MMA ENGINEERED BY MMA 5/31/13 MMA 5/31/13 5/31/13 V-DOOR SIDE JSA 5/31/13 CHECKED BY MMA APPROVED BY 5/31/13 JSA 5/31/13 ENGINEERED BY JSA 5/31/13 CLIENT APPROVAL APPROVED BY ESTIMATED WEIGHT: JSA 5/31/13 THE INFORMATION CONTAINED HEREON IS THE CONFIDENTIAL PROPERTY OF AXON DRILLING PRODUCTS AND ITS AFFILIATES, IT ISCLIENT APPROVAL NEXT ASSY.: NOTICE OF TO BE USED ONLY FOR THECONFIDENTIALITY BENEFIT OF AXON DRILLING PRODUCTS AND ESTIMATED WEIGHT: SHALL NOT BE REPRODUCED OR USED FOR ANY OTHER PURPOSE THE INFORMATION CONTAINED HEREON IS THE CONFIDENTIAL WITHOUT WRITTEN CONSENT OF AXON DRILLING PRODUCTS. SUPPLIER DWG. NO.: PROPERTY OF AXON DRILLING PRODUCTS AND ITS AFFILIATES, IT IS NEXT ASSY.: TO BE USED ONLY FOR THE BENEFIT OF AXON DRILLING PRODUCTS AND 002502-100 SHALL NOT BE REPRODUCED OR USED FOR ANY OTHER PURPOSE WITHOUT WRITTEN CONSENT OF AXON DRILLING PRODUCTS. 4 3 JSA JSA JSA JSA JSA JSA DRILLING PRODUCTS DRILLING 8909 JACKRABBIT ROAD, HOUSTON, TX 77095 PRODUCTS 002502-100 DRAWN BY DRILLING PRODUCTS 8909 JACKRABBIT ROAD, HOUSTON, TX 77095 APPROVED BY CLIENT APPROVAL NOTICE OF CONFIDENTIALITY THE INFORMATION CONTAINED HEREON IS THE CONFIDENTIAL PROPERTY OF AXON DRILLING PRODUCTS AND ITS AFFILIATES, IT IS TO BE USED ONLY FOR THE BENEFIT OF AXON DRILLING PRODUCTS AND SHALL NOT BE REPRODUCED OR USED FOR ANY OTHER PURPOSE WITHOUT WRITTEN CONSENT OF AXON DRILLING PRODUCTS. 4 MMA CHECKED BY ENGINEERED BY 5 BassDrill ASSY.: IER DWG. NO.: 5 SCALE B N.T.S DRAWING NUMBER 0826-910-DWG-6001 SFI CODE: - 6 SHEET 2 OF 9 5/31/13 5/31/13 JSA 5/31/13 - - BassD ESTIMATED WEIGHT: - NEXT ASSY.: - SUPPLIER DWG. NO.: 002502-100 REV. F 8909 Jackrabbit Road Houston, Texas 77095 P 281.855.3200 5/31/13 JSA FABRICATION / LAYOUT ELEVATION / DETAILS LOCAL ELECTRICAL ROOM (LER) [311-BX-001] SHT. SIZE 5 MMA TITLE: BassDril BassDrill SUPPLIER DWG. NO.: 4 PROJECT: ATED WEIGHT: 002502-100 DRILL FLOOR SIDE REVISIONS 3 REVISIONS REV. BY APPVD. APPVD. 2- 6 V-DOOR SIDE BOTTOM VIEW 12/09/13 MMA MMA JSA UHF INTERFACE PANEL REMOVED BY DSIC F DRAWWORKS SIDE 11/26/13 MMA MMA JSA LAYOUT UPDATE AS PER DSIC TRANSMITTAL 0826-DS-0441 E MMA MMA JSA LAYOUT UPDATED D 12/09/13 MMA MMA JSA UHF INTERFACE PANEL REMOVED BY DSIC MMA MMA JSA As per ARCD Trans. 826-ADP-010 C 11/26/13 MMA MMA JSA LAYOUT UPDATE AS PER DSIC TRANSMITTAL 0826-DS-0441 MMA MMA JSA As per ARCD Trans. 826-ADP-003 B MMA MMA JSA LAYOUT UPDATED MMA MMA JSA ISSUED FOR APPROVAL A MMA MMA JSA As per ARCD Trans. 826-ADP-010 REV.DATEMMAREV. BY APPVD. MMA JSA APPVD. As per ARCD Trans. 826-ADP-003 DESCRIPTION MMA MMA JSA ISSUED FOR APPROVAL 2 7 WN BY CABLE SIDE TRANSIT V-DOOR DRILL FLOOR SIDE 8 2 V-DOOR SIDE 540.00 DRILL FLOOR SIDE SIDE OFFBOARD 7 CABLE TRAY 9 3 CABLE TRAY DRAWWORKS SIDE DIMENSIONS ARE IN INCHES A1 BOTTOM VIEW OFFBOARD SIDE ARE IN INCHES V-DOOR SIDE DIMENSIONS SCALE 1:100 4 V-DOOR SIDE C A 6 CABLE TRANSIT BOTTOM VIEW DRAWWORKS SIDE CABLE TRANSIT A B BLE TRANSIT 5 ROOF ACCESS LADDER 540.00 OFFBOARD SIDE 128 CABLE TRANSIT 130.38 136.38 236.63 D CABLE TRAY CABLE TRAY ROOF ACCESS LADDER 540.00 DRAWWORKS SIDE 128 105 VIEW FROM OFFBOARD CABLE TRANY VIEW FROM V-DOOR V-DOOR SIDE 202 105 CABLE TRANY B 128 201 558.00 DRAWWORKS SIDE C V-DOOR SIDE 105 105 202 200 FIRE SUPPRESSION CABLE TRANSIT MANUAL RELEASE STATION VIEW FR OFFBOARD SIDE DRAWWORKS SIDE V-DOOR SIDE VIE 202 128 201 VIEW FROM DRAWWORKS 200 VIEW FROM OFFBOARD FIRE SUPPRESSION MANUAL RELEASE STATION FIRE SUPPRESSION MANUAL RELEASE STATION C D 200201 202 [573-GI-002] 558.00 105 202 6 C 201 FRESH AIR558.00 INTAKES 202 [573-GI-001] 200 5 7 5 V-DOOR SIDE 130.38 136.38 130.38 136.38 VIEW FROM DRAWWORKS 8 V-DOOR SIDE 4 TOP VIEW D E 9 [573-GI-002] 3 D B 5 4 TOP VIEW HVAC UNITS TOP VIEW HEATING, VENTILATION AND AIR CONDITIONING HVAC UNITS HEATING, VENTILATION AND AIR CONDITIONING DRILL FLOOR SIDE SPECIFICATIONS 5 4 3 axonep.com 5
© Copyright 2024 ExpyDoc
