Cleantec Extraction Technology

■ The effective way to eliminate dust & fume hazards
Cleantec® Extraction Technology
KEY FEaTurES
■ Reliable push button operation
■ Powerful extraction
■ Manual fan speed control
Shown here: Cleantec
LEV fan filter system
integrated into a
dedicated workbench
Cleantec LEV – Fan Filter Module
Cleantec® LEV Dust & Fume Extraction System
Cleantec LEV systems are designed to solve your fume, dust and odour problems
at the press of a button. Efficient filtration within a powerful extraction system
removes hazardous material from your process direct from where the extraction is
required.
Cleantec LEV systems are adaptable and may be used as a fully mobile system on
a mobile workbench, with a handle and on castors and with a single flexible or
jointed arm, or maybe installed under bench with multiple arms or connected
direct into process equipment.
Cleantec LEV has a manual fan speed control and is therefore ideal for either light
duties in laboratory or educational areas or heavier duties requiring the full power
of the fan.
Select the appropriate HEPA, carbon or combination filter for your applications,
choose a kit that best suits your requirements comprising 32mm diameter flexible
arms or 50mm diameter jointed arms complete with a nozzle or hood to match
your particular requirements.
Alternatively, you can connect a Cleantec unit to your process equipment or
custom enclosure with a 50mm or 80mm diameter flexible hose kits.
Available with
castors or
adjustable feet
for levelling
workbench on
uneven ground
Typical extraction
applications
■ Dental laboratories, hospitals
(adhesives, zirconia powders..)
■ Electronics (solder fume,
solvents..)
■ Laser processing (plume,
particles..)
■ Mechanical engineering
(solvents, particles, fume..)
■ In the laboratory (powder
removal, fume control, general
room purification..)
accessories
Large clear
dome head on
50mm jointed
arm
Clear dome
head on 32mm
flexible arm
Cleantec LEV
connected to
50mm arm
located through
workbench
Pen nib nozzle
on 50mm jointed
arm
GEnEraL FEaTurES
■ Easily changed pre-filters give extended HEPA filter life.
■ Portable and adaptable to your changing process
requirements.
■ Standard electrical socket connection for fan filter
module supply.
■ 230v Single Phase 50Hz standard — 115v 50/60Hz
systems available on request.
Metal conical
cowl on 50mm
jointed arm
ThE puriFiCaTion proCESS
Cleantec LEV systems are compact yet can handle large
air volumes.
Contaminated air is drawn into the Cleantec LEV
extraction unit by a centrifugal fan through the lid hose
connection, after passing through the filtration stages,
the clean air is discharged by the fan back into the room.
Years of research has led to the development a range of
carbon filters with highly efficient absorption
characteristics providing high loading capacities for a
wide selection of chemical fumes.
Arms may be mounted with a bench
clamp or installed through bench
FILTRATION STAGE 1
■ Removal of larger particles using EU5 grade pre-filter.
FILTRATION STAGE 2
■ Removal of fine particles using HEPA 14 grade filter
or
■ Removal of chemical fumes by activated carbon filter
Alternatively, removal of fine particles and chemical
fumes can be achieved with our Combination
HEPA/Carbon filters.
Our H14 Grade HEPA filters will remove 99.997% of
particles of 0.3µm or greater.
Choose your arm size and arrangement
Bigneat offers a selection of kits to suit the majority of applications and most users extraction needs. Please consider the
arm size and type and whether you require a single or twin arrangement and this this should lead you to your choice of kit.
Do you need extraction at more than two workstations? Do you require a wall or ceiling mounted system? Long reach
arms? Whatever your specific needs Cleantec LEV with its powerful fan can satisfy most applications.
Please contact us and we will specify the kit to suit your applications.
KiT 1
KiT 2
KiT 3
KiT 4
Cleantec
LEV
Cleantec
LEV
Cleantec
LEV
1 x flexible arm
32mm diameter, x1000mm
reach, with bench clamp,
connection hose and
hose clips
2 x flexible arms
32mm diameter, x1000mm
reach, with bench clamps,
connection hoses and
hose clips
1 x jointed arm
50mm diameter, x600mm
reach, with bench clamp,
connection hose and
hose clips
2 x jointed arms
50mm diameter, x600mm
reach, with bench clamps,
connection hoses and
hose clips
with clear dome hood
or pen nib nozzle
with x2 clear dome hoods
or x2 pen nib nozzles
with large clear dome hood
or metal conical cowl
or pen nib nozzle
with x2 large clear dome
hoods
or x2 metal conical cowls
or x2 pen nib nozzles
Part NumberS:
with clear dome hood
Part NumberS:
with clear dome hoods
Part NumberS:
with clear dome hood
Part NumberS:
with clear dome hoods
LK0001/01
with pen nib nozzle
LK0002/01
with pen nib nozzles
LK0003/01
with metal conical cowl
LK0004/01
with metal conical cowls
LK0001/03
LK0002/03
LK0003/02
with pen nib nozzle
LK0004/02
with pen nib nozzles
LK0003/03
LK0004/03
Cleantec
LEV
Choose your ﬁltration
Carbon
Pre-filter and carbon filter for chemical
vapours when particulates do not present
a hazard. For multipurpose uses.
Part
Number:
FB0009/03
hEpa
Pre-filter and HAPA filter for dust
and powders when fumes are
not present.
Part
Number:
FH0012/01
CombinaTion
Pre-filter and HEPA / Carbon Combination
for fumes and applications when both
particulates and chemicals are present.
Part
Number:
FL0002/03
a full selection of accessories, nozzles, cowls and arms is available on request.
Bigneat offers a wide
range of enclosures and
cabinets for protecting
process operators from
airborne hazards.
IN EDUCATION
Part Number:
mobile Kit
CT0200/01WH
MOBILE KIT OPTION:
Add a stainless steel handle and
castors to make your system mobile
and be able to use your Cleantec LEV
where it is needed most.
For use with arm kit 1 only.
IN INDUSTRY
Technical Specification
ref
Description
CT0200/01
Cleantec LEV Fan Filter Module
Dimensions WxDxH mm
Weight
390x375x490
18kg
health & Safety
Dust and fumes released into the working environment from commonly
used raw materials during processing may be hazardous to health. It is
imperative that all personnel are protected from exposure to any
potential health hazards. The Cleantec system, combined with the use
of the correct PPE and used as part of a comprehensive safety routine,
offer a cost-effective solution to ensuring operator safety.
Efficiency in the Workplace
Cleantec systems enhance productivity in the laboratory and workplace
by efficiently removing dusts and odours directly from the source.
Quality assured
Bigneat is accredited to
BS EN ISO 9001: 2008
Bigneat systems
are CE marked
Free assessment Service
For FREE assessment of your current
or proposed installation and uses,
please request a Risk Assessment
Form, or download a copy from
www.bigneat.com
Please contact us on
+44 (0)23 92 266400
or visit our website
www.bigneat.com
Print 03/14
BIGNEAT CONTAINMENT TECHNOLOGY
Value. Service. Experience.
Bigneat Limited
4 & 5 Piper’s Wood Industrial Park, Waterberry Drive, Waterlooville, Hampshire PO7 7XU UK
Tel: +44 (0)23 92 266400 · Fax: +44 (0)23 92 263373 · E-mail: [email protected]
www.bigneat.com

Download Report