LLB-45RF-01-00 3. To pair receiver with a different remote you will need to clear the memory, simply push the learn button until you see the lights flicker. Follow step 1 to pair with different 2. You can now power and dim your lights. To power on or off, simply press power button on top. To dim, run finger up or down on remote, when dimming is suitable remove finger.. 1. With power on momentarily press the learn button on the receiver, then touch on remote. The light will blink once to signify that your receiver and remote are paired. After installing receiver and attaching to power and lights you must pair your receiver with the the remote. Operation Easy and convenient way to control lighting without wires Transmits up to 20 meters (65 feet) Switch on/off or run finger up or down for smooth dimming 1-100% dimming control (256 step) Easy pairing with single receiver Remembers state it was when receiver power is removed Receiver can pair with up to 8 transmitters Remote includes long life batteries (Cr2025) Operating Frequency 434MHz/868Mhz Receiver Voltage: 12-36VDC, 8A Output FCC Approved Features Single Zone RF LED Dimmer LEARN BUTTON 12V-36VDC INPUT (INPUT VOLTAGE = OUTPUT VOLTAGE) OUTPUT TO LIGHT (LLB-45RR-91-00) LLB-45RF-01-00 1-100% 256 steps smooth dimming ON/OFF Ensure that cable is secured tightly in connectors. Never connect cables while power is on and always assure correct connections to avoid short circuits and damaging unit. Check if the output voltage of the receiver is compatible with the LED Light. Always be sure to mount receiver in an area with proper ventilation to avoid overheating. The LLB-45RR-91-00 receiver and LLB-45RF remote are IP20. Please avoid sun and water. When installed outdoors, please ensure it is mounted in a water proof enclosure. Product should be installed by qualified person. Safety & Warnings OPTIONAL EXTERNAL MOMENTARY SWITCH (n/o) LLB-45RR-91-00 RF Receiver Wiring diagram
© Copyright 2024 ExpyDoc