Easy Dimmer series Multi Zone RGB LED Dimmer Switch for Easy

Instructional Sheet
Part Number:
MZ3RF-RGBW5-WMT
Receiver: MZ3RF-RGBW5-WMR
Important: Read all instructions prior to installation.
Easy Dimmer series
Multi Zone RGB LED
Dimmer Switch for
Easy Dimmer Receiver
Installation
Features
• 3 zones
• Sensitive Glass Touch Panel
Product Size
• Color Temp Adjustment
• 10 Color Changing Modes
• Mounts in Standard Switch Box
120.0
Parameter
29.1
Part No. Operation Voltage
MZ3RF-RGBW5-WMT 12-24VDC Dimensions
Frequency
120x75.12x30.7 434MHz/868MHz
75.0
Wiring Diagram
1. Power Transmitter (Remote)
2. Power Receivers
110V-230VAC
MZ3RF-RGBW5-WMR
MZ3RF-RGBW5-WMT
MZ3RF-RGBW5-WMR
MZ3RF-RGBW5-WMR
4400 Earth City Expy, St. Louis MO 63045
866-590-3533
[email protected]
Button introduction
CENTER PANEL SIGNAL:
Light indicate blue light when system is on,
and red light when system is off
COLOR WHEEL:
Touch to choose color
Quickly Press to choose the color R.G.B.W
Hold to dim brightness of R.G.B.W
Warm White & Cold White &
Natural White, mixed by RGB
BRIGHTNESS
ZONE NUMBER:
Quickly Press 1. 2 . 3 to choose the zone
Hold 1. 2 . 3 to switch on/off
Programming
How to Sync to Zones:
Press “Learning Key” on receiver and within 3 seconds, choose one of the
numbered zone buttons, depressing the button until the light begins flashing.
Light will flash white 2 times, indicating that the light is now linked to that
numbered zone and can be controlled via the remote.
Warranty Agreement
1. We provide lifelong technical assistance with this product:
•A 3-year warranty is given from the date of purchase. The warranty is for free repair or replacement and covers manufacturing faults only.
2. Warranty exclusions:
•Any man-made damages caused from improper operation, or connecting
to excess voltage and overloading.
•The product appears to have excessive physical damage.
•Damage due to natural disasters and accidents.
3. Repair or replacement as provided under this warranty is the exclusive remedy
to the customer. We shall not be liable for any incidental or consequential
damages for breach of any stipulation in this warranty.
4. Any amendment or adjustment to this warranty must be approved
in writing by our company only.
4400 Earth City Expy, St. Louis MO 63045
SWITCH: Short touch to switch on/off
PLAY/PAUSE MODE BUTTON:
Quickly Press to start or Pause color
running mode;
Long touch to adjust speed (10 built-in
color running modes)
Safety & Warnings
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain.
When installed outdoors please ensure it is mounted in a water proof enclosure.
3. Good heat dissipation will prolong the working life of the controller.
Please ensure good ventilation.
4. Please check if the output voltage of any LED power supplies used
complies with the working voltage of the product.
5. Please ensure that adequate sized cable is used from the controller
to the LED lights to carry the current. Please also ensure that the
cable is secured tightly to the connector to avoid accidents due to
overheat and poor contact on the wire.
6. Ensure all wire connections and polarities are correct before
applying power to avoid any damages to the LED lights.
7. If a fault occurs please return the product to your supplier. Do not
attempt to fix this product by yourself.
866-590-3533
[email protected]

Download Report