Click Here to Request More Information about Henkel Automotive BONDERITE® MGC Process Ceramic Coating for Magnesium Alloys BONDERITE® MGC Process for magnesium substrates improves paint adhesion and provides corrosion protection. It can be used with traditional paint processes, and corrosion testing shows it provides improved robustness in unpainted and painted surfaces compared to traditional conversion coatings. BONDERITE® MGC Process is an excellent solution for Class A surfaces where the ultimate level of protection and paint adhesion is necessary. Advantages STREAMLINED COATING PROCESS • No cure ovens necessary • Room temperature process Applications •Automotive structural components – cradles, suspension parts and space frames • Uses less electrical power compared to PEO/MAO type coatings •Engine blocks RAPIDLY DEPOSITS UNIFORM COATING • 5 µm ceramic layer deposited in ~3 minutes •Door inners/outers and other body components •Intake manifolds • Uniform coating, even on sharp edges • Holds tolerances of ± 1 µm EXCEEDS PERFORMANCE SPECIFICATIONS • 1,000+ hours NSS performance sealed/ painted • Excellent solvent resistance • Worldwide coating capabilities • Enhanced performance with adhesives Work Flow Direction 1 2 3 CLEANER • Dip Process • 140°F • 3 – 5 minutes WATER RINSE DEOXIDIZER • Dip Process • 140°F • 3 – 5 minutes Henkel Corporation 32100 Stephenson Highway Madison Heights, MI 48071 866.332.7024 www.henkelna.com/automotive All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the U.S. and elsewhere. ® = registered in the U.S. Patent and Trademark Office. © 2014 Henkel Corporation. All rights reserved. 12233/ LT-6931 (3/14) 4 5 WATER PLASMA ELECTROLYTIC RINSE DEPOSITION • Dip Process • <120°F • 3 – 5 minutes 6 7 WATER RINSE AIR DRY • 180°F • 3 - 5 minutes
© Copyright 2024 ExpyDoc
