® MULTI-UNIT Internal Hexagon MULTI-UNIT SP MA-S1480 Multi-Unit abutment 1mm, Int. hex., SP MA-S2480 Multi-Unit abutment 2mm, Int. hex., SP MA-S3480 Multi-Unit abutment 3mm, Int. hex., SP MA-S4480 Multi-Unit abutment 4mm, Int. hex., SP MA-SA171 Multi-Unit 17 deg. angulated abutment, h. 1mm, Int. hex., SP WP MA-W1480 Multi unit abutment 1mm, int. hex., WP MA-W3480 Multi unit abutment 3mm, int. hex., WP © MIS Corporation. All Rights Reserved. ® PROSTHETICS MU-T0480 Multi-Unit titanium temporary cylinder MU-G0220 Prosthetic Gold screw for Multi-Unit MU-S0220 Prosthetic screw for Multi-Unit MU-BGC48 EM-SA001 Gold bar coping abutment for Multi-Unit Screw for angulated Multi-Unit MU-IT480 Impression Coping, closed tray for Multi-Unit MU-I0480 Impression Coping, open tray for Multi-Unit MU-RSM48 Analog © MIS Corporation. All Rights Reserved. Tightening abutment: 30 Ncm! Straight Multi-Unit Abutments Required tools: Torque wrench (MT-RI040) Ball attachment anchor key (MT-NB225) Angulated Multi-Unit Abutments Tightening abutment: 20 Ncm! Operating Procedure. A Use the plastic gripping tool to attach the abutment to the implant. Internal Hex. Connection User Manual Multi-Unit Abutment Operating Procedure. Internal Hex. Connection 17° 1-5mm Torque wrench (MT-RI040) Multi-Unit key (MT-NMK02) 4.8 2mm Required tools: B Remove the plastic tool by utilizing a slight bending movement. 30° 21° 2.1mm 2.1mm 2.4 & 5.4mm 1 & 4mm A 21° Use the metallic gripping tool to position the abutment, and use a Multi-Unit key (MT-NMK02) to attach the abutment to the implant by using clockwise screwing motion. 3.4 & 6.4mm 1 & 4mm C Tighten abutment to 30Ncm using a Ball attachment anchor key (MT-NB225) and a Torque wrench (MT-RI040). External Hex. Connection 4.8 17° 2mm 1-5mm A External Hex. Connection B C B. 30 ° 21° B 21° 2.1mm 2.1mm Remove the metallic gripping tool by utilizing counterclockwise movement. 3.4mm 2.4mm 1mm 1mm Conical Connection 4.8 17° 2mm 1-5mm Conical Connection 2.4 & 5.4mm 2.1mm 1& 4mm C. 30° 21° 2.1mm C 21° 3.4 & 6.4mm 1& 4mm Tighten abutment to 20Ncm using a Multi-Unit key (MT-NMK02) and a Torque wrench (MT-RI040). ® Straight Multi-Unit abutments 17º Multi-Unit abutments ^ ^ 40° 75° Packaging ^ ^ Main features: Low profile, five cuff heights, easy to use, handles for insertion, and components to support a large variety prosthetic needs. Straight Multi-Unit abutments can be used with implants with divergence of up to 40º. Recommended tightening torque: 30Ncm. 17º Multi-Unit abutmetns can be used with implants with divergence of up to 75º. Recommended tightening torque: 20 Ncm. MIS Implants Technologies Ltd. P.O.Box 7, Bar Lev Industrial Park 20156, ISRAEL Packaging 30º Multi-Unit abutments Sterilization 100° ^ Material: Titanium Alloy Ti 6Al-4V. MP-UI055 Rev.1, Oct. 2013 Angulated Multi-Unit Abutments ^ Purpose: Multi-Unit abutments are used for screw retained fixed restorations. ® ■ The device is not sterile ■ The device must be sterilized before use by autoclave, at a temperature of 134ºC (273ºF) at a pressure of ~315 Kpa during 6 minutes ■ Do not exceed 134ºC during sterilization. EC Key to code used Batch Code 30º Multi-Unit abutmetns can be used with implants with divergence of up to 100º. Recommended tightening torque: 20 Ncm. Catalogue Number EC 0483 0483 Manufacturer © MIS Corporation. All rights Reserved. REP REP MIS Implants Technologies GmbH MIS Implants Technologies Postfach 1651, 32376 Minden, GmbH Germany Postfach 1651, 32376 Minden, Germany Tel: +49 571-972-7620 Te l : + 4 9 5 71 - 9 7 2 - 7 6 2 0 Email: Email [email protected] : [email protected] Straight Multi-Unit abutments 17º Multi-Unit abutments ^ ^ 40° 75° Packaging ^ ^ Main features: Low profile, five cuff heights, easy to use, handles for insertion, and components to support a large variety prosthetic needs. Straight Multi-Unit abutments can be used with implants with divergence of up to 40º. Recommended tightening torque: 30Ncm. 17º Multi-Unit abutmetns can be used with implants with divergence of up to 75º. Recommended tightening torque: 20 Ncm. MIS Implants Technologies Ltd. P.O.Box 7, Bar Lev Industrial Park 20156, ISRAEL Packaging 30º Multi-Unit abutments Sterilization 100° ^ Material: Titanium Alloy Ti 6Al-4V. MP-UI055 Rev.1, Oct. 2013 Angulated Multi-Unit Abutments ^ Purpose: Multi-Unit abutments are used for screw retained fixed restorations. ® ■ The device is not sterile ■ The device must be sterilized before use by autoclave, at a temperature of 134ºC (273ºF) at a pressure of ~315 Kpa during 6 minutes ■ Do not exceed 134ºC during sterilization. EC Key to code used Batch Code 30º Multi-Unit abutmetns can be used with implants with divergence of up to 100º. Recommended tightening torque: 20 Ncm. Catalogue Number EC 0483 0483 Manufacturer © MIS Corporation. All rights Reserved. REP REP MIS Implants Technologies GmbH MIS Implants Technologies Postfach 1651, 32376 Minden, GmbH Germany Postfach 1651, 32376 Minden, Germany Tel: +49 571-972-7620 Te l : + 4 9 5 71 - 9 7 2 - 7 6 2 0 Email: Email [email protected] : [email protected] Tightening abutment: 30 Ncm! Straight Multi-Unit Abutments Required tools: Torque wrench (MT-RI040) Ball attachment anchor key (MT-NB225) Angulated Multi-Unit Abutments Tightening abutment: 20 Ncm! Operating Procedure. A Use the plastic gripping tool to attach the abutment to the implant. Internal Hex. Connection User Manual Multi-Unit Abutment Operating Procedure. Internal Hex. Connection 17° 1-5mm Torque wrench (MT-RI040) Multi-Unit key (MT-NMK02) 4.8 2mm Required tools: B Remove the plastic tool by utilizing a slight bending movement. 30° 21° 2.1mm 2.1mm 2.4 & 5.4mm 1 & 4mm A 21° Use the metallic gripping tool to position the abutment, and use a Multi-Unit key (MT-NMK02) to attach the abutment to the implant by using clockwise screwing motion. 3.4 & 6.4mm 1 & 4mm C Tighten abutment to 30Ncm using a Ball attachment anchor key (MT-NB225) and a Torque wrench (MT-RI040). External Hex. Connection 4.8 17° 2mm 1-5mm A External Hex. Connection B C B. 30 ° 21° B 21° 2.1mm 2.1mm Remove the metallic gripping tool by utilizing counterclockwise movement. 3.4mm 2.4mm 1mm 1mm Conical Connection 4.8 17° 2mm 1-5mm Conical Connection 2.4 & 5.4mm 2.1mm 1& 4mm C. 30° 21° 2.1mm C 21° 3.4 & 6.4mm 1& 4mm Tighten abutment to 20Ncm using a Multi-Unit key (MT-NMK02) and a Torque wrench (MT-RI040). ® Tightening abutment: 30 Ncm! Straight Multi-Unit Abutments Required tools: Torque wrench (MT-RI040) Ball attachment anchor key (MT-NB225) Angulated Multi-Unit Abutments Tightening abutment: 20 Ncm! Operating Procedure. A Use the plastic gripping tool to attach the abutment to the implant. Internal Hex. Connection User Manual Multi-Unit Abutment Operating Procedure. Internal Hex. Connection 17° 1-5mm Torque wrench (MT-RI040) Multi-Unit key (MT-NMK02) 4.8 2mm Required tools: B Remove the plastic tool by utilizing a slight bending movement. 30° 21° 2.1mm 2.1mm 2.4 & 5.4mm 1 & 4mm A 21° Use the metallic gripping tool to position the abutment, and use a Multi-Unit key (MT-NMK02) to attach the abutment to the implant by using clockwise screwing motion. 3.4 & 6.4mm 1 & 4mm C Tighten abutment to 30Ncm using a Ball attachment anchor key (MT-NB225) and a Torque wrench (MT-RI040). External Hex. Connection 4.8 17° 2mm 1-5mm A External Hex. Connection B C B. 30 ° 21° B 21° 2.1mm 2.1mm Remove the metallic gripping tool by utilizing counterclockwise movement. 3.4mm 2.4mm 1mm 1mm Conical Connection 4.8 17° 2mm 1-5mm Conical Connection 2.4 & 5.4mm 2.1mm 1& 4mm C. 30° 21° 2.1mm C 21° 3.4 & 6.4mm 1& 4mm Tighten abutment to 20Ncm using a Multi-Unit key (MT-NMK02) and a Torque wrench (MT-RI040). ® Straight Multi-Unit abutments 17º Multi-Unit abutments ^ ^ 40° 75° Packaging ^ ^ Main features: Low profile, five cuff heights, easy to use, handles for insertion, and components to support a large variety prosthetic needs. Straight Multi-Unit abutments can be used with implants with divergence of up to 40º. Recommended tightening torque: 30Ncm. 17º Multi-Unit abutmetns can be used with implants with divergence of up to 75º. Recommended tightening torque: 20 Ncm. MIS Implants Technologies Ltd. P.O.Box 7, Bar Lev Industrial Park 20156, ISRAEL Packaging 30º Multi-Unit abutments Sterilization 100° ^ Material: Titanium Alloy Ti 6Al-4V. MP-UI055 Rev.1, Oct. 2013 Angulated Multi-Unit Abutments ^ Purpose: Multi-Unit abutments are used for screw retained fixed restorations. ® ■ The device is not sterile ■ The device must be sterilized before use by autoclave, at a temperature of 134ºC (273ºF) at a pressure of ~315 Kpa during 6 minutes ■ Do not exceed 134ºC during sterilization. EC Key to code used Batch Code 30º Multi-Unit abutmetns can be used with implants with divergence of up to 100º. Recommended tightening torque: 20 Ncm. Catalogue Number EC 0483 0483 Manufacturer © MIS Corporation. All rights Reserved. REP REP MIS Implants Technologies GmbH MIS Implants Technologies Postfach 1651, 32376 Minden, GmbH Germany Postfach 1651, 32376 Minden, Germany Tel: +49 571-972-7620 Te l : + 4 9 5 71 - 9 7 2 - 7 6 2 0 Email: Email [email protected] : [email protected]
© Copyright 2025 ExpyDoc
