PME Driver - Particle Measuring Systems

PME Driver
Particle Measuring Ethernet Driver
Easy to Install
•Installs on SCADA server or remote PC
•Integrates easily with iFIX
Easy to Use
Simple Configuration of Particle
Counters and Sensors
•All Particle Measuring Systems aerosol
Ethernet instruments are automatically
recognized by software
•Writeable tags allow for instrument
configuration
•Export of data table as CSV file for
integration to SCADA
The PME Driver from Particle Measuring Systems provides the
connection between Ethernet-based instruments and SCADA systems. The PME Driver can connect to multiple Particle Measuring Systems
instruments simultaneously, allowing for instrument configuration and
sample data collection.
The PME Driver is a stand-alone OPC Server, facilitating a simple
connection to any building management system or SCADA system that
supports running as an OPC client.
The PME I/O driver works with the
following instruments from Particle
Measuring Systems
•Airnet® and Airnet II Particle Sensor
•Lasair® II and Lasair III Particle Counter
•IsoAir® 310P Particle Sensor
•AM II-16/32 Aerosol Manifold
For users with GE Proficy iFix SCADA installations, the PME Driver delivers
the sample data directly to the process database.
The PME Driver incorporates the following attributes to provide flexibility
and ease-of-use:
• OLE automation technology
• FIX/iFIX integration
• Event-driven architecture
• OPC (OLE for Process Control) compliance
Without measurement there is no control.
PME Driver
Particle Measuring Ethernet Driver
specifications
Operating system
Windows® XP with Service Pack 1 or greater
Compatible Instruments
Particle sensors
Airnet
Airnet sensors make it
easy and cost effective to
simultaneously monitor air
from multiple locations.
Particle counters
Airnet II
Airnet II particle sensors offer
a small footprint, unparalleled
performance, and data
transmission capabilities while
meeting the specification of
ISO 21501-4.
Lasair II
The Lasair II-110 is the first
laser diode 1.0 CFM unit with
the ability to count 0.1 µm
particles.
Aerosol manifold
IsoAir 310P
Compact and rugged the
IsoAir 310P Aerosol Particle
Sensors make aerosol
monitoring easy and cost
effective.
Lasair III
The Lasair III Particle Counter is available in three different flow
rate configurations (1 CFM, 50 LPM and 100 LPM) to meet a
variety of cleanroom applications.
AM II-16/32
The AM II -16/32 manifold offers advanced features for
sequentially monitoring aerosol contamination at multiple
locations with a fixed particle counter.
Airnet®, IsoAir® and Lasair® are registered trademarks of Particle Measuring Systems®, Inc.
All other trademarks are the property of their respective owners.
Particle Measuring Systems, Inc. reserves the right to change specifications without notice.
Particle Measuring Systems Headquarters
5475 Airport Blvd., Boulder, CO 80301, USA
Tel: +1 303 443-7100
+1 800 238-1801
FAX: +1 303 449-6870
Instrument Service & Support: +1 800-557-6363
Customer Response Center: +1 877-475-3317
PMS EMEA
Tel: +44 1684 581 000
Email: [email protected]
Particle Measuring Systems Nordic
Tel: +45 707 028 55
Email: [email protected]
Particle Measuring Systems France
Tel: +33 160 10 32 96
Email: [email protected]
Particle Measuring Systems China
Tel: +86 21 6113 3600
Email: [email protected]
Particle Measuring Systems Germany Particle Measuring Systems Japan
Tel: +81 3 5298 8175
Tel: +49 2222 9299 522
Email: [email protected] Email: [email protected]
Particle Measuring Systems Italia
Tel: +39 06 9053 0130
Email: [email protected]
© 2012 Particle Measuring Systems, Inc. All rights reserved.
AUTHORIZED REPRESENTATIVE
Particle Measuring Systems Brazil
Tel: +55 11 5188 8166
Email: [email protected]
Particle Measuring Systems Mexico
Tel: +52 55 2271 5106
Email: [email protected]
Particle Measuring Systems Singapore Particle Measuring Systems Puerto Rico
Tel: +65 6496 0330
Tel: +1 787 718 9096
Email: [email protected] Email: [email protected]
091812