FOI-6010 / TD-6010 FLEXIBLE INTERFACE SFP/SFP+ WORKBOX Description The true “Swiss Army Knife” of fiber optic transport, the FOI(TD)-6010 in conjunction with any combination of a myriad of FiberPlex or third party SFP/SFP+ (Small FormFactor Pluggable) optical & electrical modules, allows you to transport what you want, when you want it, how you want it, wherever you want it; all over one product solution... The FiberPlex FOI-6010 or TD-6010 and SFP/ SFP+ module should be in everyone’s toolbox. Features: • High speed 12.5 Gbps SFP/SFP+ ports • TD includes ‘Wall Wart’ style power supply as well as a 3position Phoenix™ • uFAC port that allows for monitoring & programming of the SFP/SFP+ modules Applications: With the FOI(TD)-6010, the possible applications are virtually endless: SFP Modules not included What’s the difference between the FOI and the TD versions? Functionally, the FOI-6010 and TD-6010 are identical. The only differences are the packaging and power supply. The FOI-6010 is part of the FOI line of products designed for ruggedized military applications while the TD-6010 is housed in the commercial ‘Throw Down’ packaging. FOI-6010 Requires a PSQ-4909 AC supply or PSQ-4920 DC supply High Reliability Lemo™ connector Standalone Power Power Connection Uses the RMC series chassis for up to 9 units in 2U or 8 units with redundant power supply Mil-style sealed steel can enclosure Chassis Mounting Case TD-6010 Power Supply included Both circular DC connector and 3-postion Phoenix™ quick connect 6 units in a 1U with the optional TDR-01 • Multimode to singlemode • Optical standard duplex to single fiber bidirectional (BiDi) transport • Fiber optic repeater • Optical wavelength conversion • 10/100/1000 Ethernet to fiber • ASI, SD-SDI, HD-SDI & 3G-SDI to fiber • HDMI/DVI to fiber • MADI to fiber • 4K UHD Video to fiber • Video format conversion Durable anodized brushed aluminum Typical Applications The FOI(TD)-6010 facilitates interface between virtually any fiber optic devices. You simply choose the SFP modules you need for your application - the FOI(TD)-6010 does the rest: Mode Conversion / Repeater SFP Modules Varying types of SFP options Ethernet Applications MADI Applications HD Video / Security Video Distribution Made in the USA by FiberPlex Technologies LLC. • www.fiberplex.com • 301.604.0100 • [email protected] FOI-6010 / TD-6010 FLEXIBLE INTERFACE SFP/SFP+ WORKBOX FOI-6010 Front and Rear TD-6010 Front and Rear LED INDICATORS Label PWR STAT TX (one per slot) RX (one per slot) Color Blue Off Green Amber Red Off Green Amber Red Off Green Red Off Description Power supply in FOI unit is operating properly No power from the external supply or internal fault. Unit is operational, all conditions nominal At limit of normal range of temperature, apply more cooling to the unit Exceeding temperature limits or internal failure If Power LED is on, there is an internal failure inside the FOI. Replace. SFP installed, SFP reports transmit good SFP installed, transmit disabled in firmware, otherwise good SFP installed, SFP reports transmit fault. Note that some SFPs report this even when transmit is disabled. SFP not installed SFP installed, good receive signal SFP installed, no receive signal SFP not installed ELECTRICAL SPECIFICATIONS Min Typ Max unit 5 9 40 VDC 21 23 30 mA 420 555 1000 mA -40 85 °C 0 50 °C Min Typ Max unit 155 12500 Mbps 40 psec 3.3 VDC 500 mA 2 SFP+ MSA (SFF-8431, SFF-8432, SFF-8433) compliant OR non-MSA slots, data rate 0 – 12.5 Gbps Power Requirement Voltage Range Supply Current, no SFPs Supply Current, max 2 SFP+ slots Storage Temperature (°C) Operating Temperature (°C) External SFP Interface Environmental Data Rate Recommended Jitter Operating Voltage Maximum Current Optical Modules PHYSICAL SPECIFICATIONS Case Dimensions FOI-6010 (Size 4) TD-6010 Length 4.5 in (114 mm) 4.5 in (114 mm) Width 1.453 in (37 mm) 1.66 in (42 mm) Height 7.562 in (65 mm) 2.75 in (70 mm) Weight 2 lb (0.9 kg) 0.4 lb (0.2 kg) The firmware included in this product utilizes the Atmel Software Framework (ASF), Copyright (c) 2011 - 2012 Atmel Corporation. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of Atmel may not be used to endorse or promote products derived from this software without specific prior written permission. 4. This software may only be redistributed and used in connection with an Atmel micro-controller product. THIS SOFTWARE IS PROVIDED BY ATMEL “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Made in the USA by FiberPlex Technologies LLC. • www.fiberplex.com • 301.604.0100 • [email protected]