SCV Series barbed check valves are coming to market to simplify assembly and reduce the risk of Series Barbed Check Valves contamination and cracking due to solvents. Available in medical grade materials and multiple fitments the valves feature more precise, lower crack pressures, higher flow rates, low priming volume, ease of removing air bubbles during priming and operate in any spatial orientation. All products feature DEHP- and latex-free silicone diaphragms and all materials satisfy USP Class VI and ISO 10993 criteria. Flow Part No. Ports Cracking Pressure Max. Back Pressure Flow Rate (water) Materials SCV67220 Barb for 3/32" (2.4 mm) ID tubing x 3/32" (2.4 mm) ID tubing ≤ 6 mBar ≤ .087 psig 8 bar 116.030 psig ≥ 150 ml/min ≥ .0396 gal/min MABS, Silicone SCV67230 Barb for 1/8" (3.2 mm) ID tubing x 1/8" (3.2 mm) ID tubing ≤ 6 mBar ≤ .087 psig 8 bar 116.030 psig ≥ 150 ml/min ≥ .0396 gal/min MABS, Silicone SCV67220/230 Barb for 3/32" (2.4 mm) ID tubing x 1/8" (3.2 mm) ID tubing ≤ 6 mBar ≤ .087 psig 8 bar 116.030 psig ≥ 150 ml/min ≥ .0396 gal/min MABS, Silicone SCV67230/220 Barb for 1/8" (3.2 mm) ID tubing x 3/32" (2.4 mm) ID tubing ≤ 6 mBar ≤ .087 psig 8 bar 116.030 psig ≥ 150 ml/min ≥ .0396 gal/min MABS, Silicone SCV67FL/220 Female locking luer to barb for 3/32" (2.4 mm) ID tubing ≤ 6 mBar ≤ .087 psig 8 bar 116.030 psig ≥ 150 ml/min ≥ .0396 gal/min SAN, MABS, Silicone SCV67FL/230 Female locking luer to barb for 1/8" (3.2 mm) ID tubing ≤ 6 mBar ≤ .087 psig 8 bar 116.030 psig ≥ 150 ml/min ≥ .0396 gal/min SAN, MABS, Silicone SCV67220/ML Barb for 3/32" (2.4 mm) ID tubing to male locking luer ≤ 6 mBar ≤ .087 psig 8 bar 116.030 psig ≥ 150 ml/min ≥ .0396 gal/min MABS, SAN, Silicone SCV67230/ML Barb for 1/8" (3.2 mm) ID tubing to male locking luer ≤ 6 mBar ≤ .087 psig 8 bar 116.030 psig ≥ 150 ml/min ≥ .0396 gal/min MABS, SAN, Silicone For more information and samples, please visit www.scvseries.com
© Copyright 2024 ExpyDoc
