Medical Sterile Filters

nano F-Series1: Compressed Air & Gas Filtration
Medical Sterile Filters
16 models specifically designed and manufactured to
exceed the requirements for medical gas pipeline systems
The nano F-Series1 range of medical sterile
filters are manufactured from cast aluminum
alloy providing enhanced strength and feature
an E-Coat™ finish for optimum corrosion
protection.
Applications Include:
Dental
Medical
Veterinary
This range encompasses 16 filters with
connections from 1/4” to 3“ and rated flows
from 15 to 1500 scfm. The modular design
allows close coupling of filters to simplify
installation and maintenance.
This unique design includes elements with
stainless steel end caps for compatibility
with autoclave sterilization. Each element is
100% integrity tested and provided with an
Air Sterilization Certificate to guarantee the
highest downstream air quality.
100% integrity tested elements
Tested and validated to international standards,
elements are guaranteed for a minimum of
100 sterilization cycles at 248oF.
Experience. Customer. Service.
nano-purification solutions
11330 Vanstory Drive
Huntersville, NC 28078
USA
Tel:
(704) 897-2182
Fax:
(704) 897-2183
Email:[email protected]
web:
www.n-psi.com
www.n-psi.com
NMS Medical Sterile Filters
Technical Specification
Filter Model
NMS 0015
NMS 0025
NMS 0035
NMS 0050
NMS 0070
NMS 0085
NMS 0175
NMS 0280
NMS 0325
NMS 0400
NMS 0450
NMS 0700
NMS 0850
NMS 1000
NMS 1250
NMS 1500
Inlet &
Outlet (1)
NPT
¼”
¼”
⅜”
½”
½”
¾”
1”
1 ¼”
1 ½”
1 ½”
2”
2”
2 ½”
3”
3”
3”
A
Maximum
Rated Flow (2)
scfm
15
25
35
50
70
85
175
280
325
400
450
700
850
1000
1250
1500
Nm3/h
25.5
42.5
59.5
85
119
144
297
476
550
680
765
1190
1445
1700
2125
2550
Dimensions
(inches)
A
1.97
2.75
2.75
2.75
3.94
3.94
3.94
4.80
4.80
5.75
5.75
5.75
8.27
8.27
8.27
8.27
B
0.71
0.98
0.98
0.98
1.38
1.38
1.38
1.65
1.65
2.05
2.05
2.05
2.60
2.60
2.60
2.60
C
5.98
7.52
7.52
9.13
10.9
10.9
15.6
18.1
18.1
19.0
19.0
30.9
23.4
23.4
32.1
38.4
specifications
B
C
lbs
1.1
1.8
1.8
2.0
4.4
4.4
5.3
7.3
7.3
10.8
10.8
15.4
21.1
21.1
25.5
28.8
Part No.
E0015 MS
E0035 MS
E0035 MS
E0050 MS
E0085 MS
E0085 MS
E0175 MS
E0325 MS
E0325 MS
E0450 MS
E0450 MS
E0700 MS
E1000 MS
E1000 MS
E1250 MS
E1500 MS
NMS 0025 to 0050
NMS 0070 to 1500
NDP 50
NDP 1500
manual valve
manual valve
manual valve
0 to 232 psig
0 to 232 psig
0 to 232 psig
cast aluminum with E-Coat™ & powder top coat finish
element performance
PURIFICATION SOLUTIONS
Replacement
Element Kit
D
2.95
3.35
3.74
5.31
6.10
6.10
8.86
12.6
12.6
12.8
12.8
24.8
16.1
16.1
24.8
30.9
NMS 0015
differential pressure indicator / gauge
condensate drain (included)
design operating pressure range
filter housing material
Approx.
Weight
MS
DOP efficiency (3)
particle removal
recommended operating temperature range
design operating temperature range
maximum autoclave temperature (4)
pressure drop - clean
pressure drop - recommended replacement
end cap material
flow direction through element
maximum steam sterilization cycles
maximum element life
> 99.9999%
0.01 micron
35 to 212oF
35 to 248oF
273oF
1.5 psid
6.0 psid
stainless steel
outside to inside
100
6 months or 1000 hours
pressure correction factors
operating pressure (psig)
correction factor
D
60
0.76
70
0.84
85
0.92
100
1.00
115
1.07
145
1.19
175
1.31
205
1.41
235
1.51
(1) Inlet and outlet connections are NPT threaded to ANSI B2.1.
(2) At 100 psig. For all other pressures, refer to the pressure correction factor table above.
(3) As specified in HTM 02-01 medical gas pipeline systems.
(4) Applies to the element only.
Copyright nano-purification solutions
Publication ref. n-psi-F1-NMS-01-US

Download Report