Contents to Volume 55

i
MATERIALS TRANSACTIONS
HEAD OFFICE
The Japan Institure of Metals and Materials: 1-14-32, Ichibancho, Aoba-ku, Sendai 980-8544, Japan
VOLUME 55
2014
INDEX TO VOLUME 55
REGULAR ARTICLES
MATERIALS PHYSICS
Evolution of Texture in High Permeability Grain Oriented
Silicon Steel Produced by Casting Thin Slab and Rolling
Process
. . . . . . . . . . . . . . . . . . . . . . . . . . . Fan Li-feng, Qiu Sheng-tao,
Xiang Li and Tang Guang-bo
Effect of Initial Microstructure on Mg Scroll Forging under
Warm Forming Condition
. . . . . . . . . . . . . . . . . . . . . . Jonghun Yoon and Junghwan Lee
Visible-Light Photocatalysis of LSMO-Graphene Nanocomposites toward Degradation of Methyl Red
. . . . . . . . . . . . . . . . . T. Xian, H. Yang, Y. F. Wang, L. J. Di,
J. L. Jiang, R. S. Li and W. J. Feng
Volume and Enthalpy Relaxation in Pd42.5Cu30Ni7.5P20 Bulk
Metallic Glass
. . . . . O. Haruyama, T. Mottate, K. Morita, N. Yamamoto,
H. Kato and T. Egami
Magnetic Behavior of FePt/AlN Layered Structure
. . . . . . . Cong Zhang, Ryūtarō Tajima, Takumi Sannomiya,
Shinji Muraishi, Yoshio Nakamura and Ji Shi
Structural and Magnetic Properties of Magnetic Shape Memory
Alloy Ni46Mn41In13 under Magnetic Fields
. . . Kenichi Abematsu, Rie Y. Umetsu, Ryosuke Kainuma,
Takeshi Kanomata, Kazuo Watanabe and Keiichi Koyama
Magneto-Dielectric Properties of Epitaxial Ba(Fe0.5Sn0.5)O3¹¤
Thin Films on (001) SrTiO3 Substrates by Pulsed Laser
Deposition
. . . Ryoichi Shinoda, Akihiro Iwase and Toshiyuki Matsui
New Aspects of Ecomaterials from the Viewpoints of the
Consumer and Regional Communities
. . . . . . . . . . . . . . . . Osamu Umezawa, Yoshikazu Shinohara
and Kohmei Halada
Preparation, Properties and Microstructure of SiC Particle
Reinforced Al­Si Matrix Composite
. . . Shiming Hao, Jingpei Xie, Aiqin Wang and Ming Fang
..
1-123
..
2-238
..
2-245
..
3-466
..
3-473
..
3-477
..
4-637
..
5-745
..
5-750
Internal Friction of an Ag­In­Yb Icosahedral Quasicrystal
. . . . . . . Kenma Handa, Yeong-Gi So, Yasushi Kamimura,
Ryuji Tamura and Keiichi Edagawa .
Electrical Properties and Carrier Transport Mechanism of Au/
n-GaN Schottky Contact Modified Using a Copper Pthalocyanine (CuPc) Interlayer
. . . V. Janardhanam, I. Jyothi, Ji-Hyun Lee, Jae-Yeon Kim,
V. Rajagopal Reddy and Chel-Jong Choi .
Thermoelectric Properties of a T-Shaped Quantum Dot with
Relatively Strong On-Site Coulomb Interaction
. . . . . . . . . . . . Gaofeng Ji, Xiansheng Cao and Guoping Ru .
Structure of an Al­Cu­Co Decagonal Quasicrystal Studied by
Cs-Corrected STEM
. . . . . . . . . . . . . . . . . . . . . Kunio Yubuta, Kazuki Yamamoto,
Akira Yasuhara and Kenji Hiraga .
Structure of the Passive Film formed on Fe­Mn­Si­Cr­Ni Shape
Memory Alloy after Wet and Dry Corrosion Test
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T. Nishimura .
Effect of Excitation Parameters on the Barkhausen-Noise in
FINEMET-Type Amorphous Ribbons
. . . . . . . . L. Daróczi, G. Eszenyi, Zs. Molnár, D. L. Beke,
A. Bükki-Deme and F. Zámborszky .
Nanostructure Variations and Their Effects on Mechanical
Strength of Ni-17Mo-7Cr Alloy under Xenon Ion Irradiation
. . . . . . . . . . . . . . H. F. Huang, D. H. Li, J. J. Li, R. D. Liu,
G. H. Lei, S. X. He, Q. Huang and L. Yan .
Full-Potential KKR Calculations for Lattice Distortion Effect
of Point Defect in bcc-Fe Dilute Alloys, Based on the
Generalized-Gradient Approximation
. . . . . . . . . . . . . . . . . . . . . . . M. Asato, C. Liu, K. Kawakami,
N. Fujima and T. Hoshino .
The Influence of B4C on the Fluidity of Ti-6Al-4V-xB4C
Composites
. . . . . . . . . . . . . . . . . . . . . . . . . Jiheng Wang, Xianglong Guo,
Liqiang Wang and Weijie Lu .
Magnetic Properties of Antiferromagnetic Coupled Co-Pt
Stacked Films with Two-Dimensional Array Structures
.
5-754
.
5-758
.
6-861
.
6-866
.
6-871
.
8-1237
.
8-1243
.
8-1248
.
9-1367
ii
. . . . . . . . . . . . . . Haruki Yamane and Masanobu Kobayashi .
Dual Control Theory of Spintronics (Rapid Publication)
. . . . . . Morishige Yoneda, Shuji Obata and Masaaki Niwa .
Effect of Cu Addition on Soft Magnetic Properties of Fe­Zr­Si
Amorphous Alloy (Rapid Publication)
. . . . . . . . . . . . . . . . . . . . . . . . Suchul Yoon and Seok-Jae Lee .
Effect of Doping for Epitaxial (Ba1¹xYbx)(Fe0.2Zr0.8)O3¹¤ Thin
Films with Yb
. . . . . . . . . . . . . . . Ryoichi Shinoda, Norie Hirao, Yuji Baba,
Akihiro Iwase and Toshiyuki Matsui .
Computer Simulations on Barkhausen Effects and Magnetizations in Fe Nano-Structure Systems (Express Regular
Article)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shuji Obata .
Improved Properties of TiC Coating Deposited on Copper Alloy
via Friction Stir Processing
. . . . . . Zhixiong Xie, P. Luo, S. J. Dong and FenFang Tan .
Surface Observation of LaNi5 under Deuterium Atmosphere
Using Small-Angle Neutron Scattering
. . . . . . . . . . . . . . . Kazuhiro Mori, Kenji Iwase, Yojiro Oba,
Toshiharu Fukunaga and Masaaki Sugiyama .
Structural and Optical Properties of Smooth Surface TCO Thin
Films Deposited on Different-Sized Staked Nanoparticle
Layers for Window Electrode of Thin Film Si Solar Cells
(Express Regular Article)
. . . . . . . . Shuhei Miura, Kazutoshi Suzuki, Shinichi Noda,
Masanari Inoue, Kouichi Murakami and Shuichi Nonomura .
Numerical Study on Effective Thermal Conductivity of Radial
Nanowire Heterostructures with MWCNT Core (Express
Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . Joo Hyun Moon, Jeongmin Lee,
Jooheon Kim and Seong Hyuk Lee .
Electronic and Magnetic Properties of Mn2Sb1¹xAsx ðx ¼ 0;
0:5; 1Þ (Express Regular Article)
. . . . . . . . . Takatoshi Kakimoto, Junya Goto, Shinpei Fujii,
Keiichi Koyama and Shoji Ishida .
Facile Synthesis of Fe3O4 Nanoparticles with a High Specific
Surface Area (Rapid Publication)
. . . . . . . . . . . . . . . . Jianchao Ma, Lingling Wang, Yanli Wu,
Xianshu Dong, Qingliang Ma, Chen Qiao,
Qingfang Zhang and Jilong Zhang .
.
9-1372
.
9-1510
.
9-1517
. 10-1521
. 10-1591
. 11-1639
. 11-1643
. 11-1765
. 11-1770
. 12-1878
. 12-1900
MICROSTRUCTURE OF MATERIALS
Direct Observation of Grain Boundary Migration during
Recrystallization within the Bulk of a Moderately Deformed
Aluminium Single Crystal
. . . Steven Van Boxel, Søren Schmidt, Wolfgang Ludwig,
YuBin Zhang, Dorte Juul Jensen and Wolfgang Pantleon
Microstructure and Mechanical Properties of Friction Stir
Welded Q345 Steel
. . . Di Qiu He, Ning Li, Kun Yu Yang and Shao Yong Ye
A Slip Enhanced Superhydrophobic Surface Based on Reticulated ZnO Nanostructure (Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jun Xia and Jun Wu
Formation of Fully Annealed Nanocrystalline Austenite in Fe­
Ni­C Alloy (Rapid Publication)
. . . . . . . . . . . . . . . . . . . . . . . . . Shuai Chen, Akinobu Shibata,
Si Gao and Nobuhiro Tsuji
Aging Behavior of Ultra-Fine Grained Al­0.5%Si­0.5%Ge
Alloy Fabricated by ARB Process
. . . . . . Keiyu Nakagawa, Nobuhiro Tsuji, Daisuke Terada,
Toshihiko Nakano, Khairul Nizam and Teruto Kanadani
Dynamic Recrystallization Behavior of Waspaloy during Hot
Working
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Takanori Matsui
Microstructure Evolution of Mg­4.3Zn­0.7Y­0.6Zr Alloy during Solution Heat Treatment
. . . . . . . . . . . . . . . Junjie Li, Yacong Zhang, Jincheng Wang
and Zhongming Zhang
..
1-128
..
1-137
..
1-194
..
1-223
..
2-249
..
2-255
..
2-264
Effect of Pre-Aging Treatment on the Microstructure and
Magnetic Properties of Sm(Co,Fe,Cu,Zr)7.8 Sintered Magnets
. . . Yosuke Horiuchi, Masaya Hagiwara, Keiko Okamoto,
Tsuyoshi Kobayashi, Masaki Endo, Tadahiko Kobayashi,
Naoyuki Sanada and Shinya Sakurada
Quantitative Evaluation of Phase Field Microstructure Based on
the Variational Principle
. . . . . . . . . . . . . . . . . . . . . . . . . . Kenji Iseya and Tetsuo Mohri
Effect of Sintering Profile and Composition of Ni/Al2O3
Functional Gradient Materials Coating Layers via Pulsed
DC Electrophoretic Deposition (Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . Hyungsub Kim, Seungkyu Yang
and Caroline Sunyong Lee
Aging Behavior of Ultrafine-Grained Al­Mg­Si­X (X = Cu,
Ag, Pt, Pd) Alloys Produced by High-Pressure Torsion
. . . . . . . . . . . . Daichi Akama, Seungwon Lee, Zenji Horita,
Kenji Matsuda and Shoichi Hirosawa
Influences of Fine-Particle Bombarding and Conventional Shot
Peening on Surface Properties of Steel
. . . . . . . . . . . . Tatsuro Morita, Sho Noda and Chuji Kagaya
Near-Net-Shape Tungsten­Rhenium Alloy Parts Produced by
Plasma Spray Forming and Hot Isostatic Pressing (Express
Regular Article)
. . . . . . . . . Yueming Wang, Xiang Xiong, Weizhong Zhao,
Lu Xie, Jianhui Yan, Xiaobing Min and Feng Zheng
Effect of Static Recrystallization on Texture Development and
Formability in Mg­Al­Zn and Mg­Li­Zn Alloys (Express
Rapid Publication)
. . . . . . . Jong-Youn Lee, Young-Su Yun, Seok-Hwan Jung,
Won-Tae Kim and Do-Hyang Kim
Aging Effect on Microstructure of Cold Groove-Rolled ¡B-Type
Ti­12 mass%V­2 mass%Al Alloys Studied by Transmission
Electron Microscopy
. . . . . . . . . . . . . . . . . . . . Kazuhisa Sato, Hiroaki Matsumoto,
Akihiko Chiba and Toyohiko J. Konno
Thermal Stability and Transition Behavior of Nanoclusters
during Two-Step Aging at 250°C in Al­Mg­Si(­Cu) Alloys
. . . . . . . . . . . . . . . . . . . . JaeHwang Kim, SeongNyeong Kim,
Equo Kobayashi and Tatsuo Sato
In Situ and Real-Time Observation of the Solidification Process
of Al­20 mass%Cu Alloy by Synchrotron X-ray Radiography
. . . . . . . Maodong Kang, Haiyan Gao, Da Shu, Jun Wang,
Faguo Li, Yanan Fu, Lishibao Ling and Baode Sun
Residual Stresses and Dimensional Changes Related to the
Lattice Parameter Changes of Heat-Treated JIS SKD 11 Tool
Steels (Express Regular Article)
. . . . . . . . . . . Yang-Yu Su, Liu-Ho Chiu, Fan-Shiong Chen,
Shou-Chi Lin and Yeong-Tsuen Pan
Effect of High-Pressure Torsion Process on Precipitation
Behavior of ¡ Phase in ¢-Type Ti­15Mo Alloy
. . . . . . . . . . . . . . . . . . . . . . . Baozhen Jiang, Koichi Tsuchiya,
Satoshi Emura and Xiaohua Min
Effect of Two-Step Aging on Cluster Formation in Al­Mg­Si
Alloys
. . . . . . . . . . . . . . Ken Takata, Jun Takahashi, Makoto Saga,
Kohsaku Ushioda, Akira Hibino and Masao Kikuchi
Preparation and Hydrolysis of Aluminum Based Composites for
Hydrogen Production in Pure Water
. . . . . . . . . . . . . . . . . . . . . . . . Huihu Wang, J. Lu, S. J. Dong,
Y. Chang, Y. G. Fu and Ping Luo
The Effect of Pre-Strain on the Resistance to Hydrogen
Embrittlement in 316L Austenitic Stainless Steel (Express
Regular Article)
. . . . . . . . . . . . . . . Il-Jeong Park, Jae-Gil Jung, Seo Yeon Jo,
Sang-Min Lee and Young-Kook Lee
Effect of Cu on the Precipitation of Deleterious Phases and the
Mechanical Properties of 27Cr­7Ni Hyper Duplex Stainless
Steels (Express Regular Article)
. . . . . . . . . . Soon-Hyeok Jeon, Il-Jeong Park, Hye-Jin Kim,
Soon-Tae Kim, Young-Kook Lee and Yong-Soo Park
..
3-482
..
3-489
..
3-599
..
4-640
..
4-646
..
4-713
..
4-742
..
5-763
..
5-768
..
5-774
..
5-831
..
6-877
..
6-885
..
6-892
..
6-964
..
6-971
iii
Precipitation Sequence in the Mg­Gd­Y System Investigated by
HRTEM and HAADF-STEM
. . . . Yuuki Matsuoka, Kenji Matsuda, Katsumi Watanabe,
Junya Nakamura, Williams Lefebvre, Daisuke Nakagawa,
Seiji Saikawa and Susumu Ikeno .
Kinetics of Solid-State Reactive Diffusion between Co and Sn
. . . . Minho O, Yoshiki Takamatsu and Masanori Kajihara .
Effects of Natural Aging on Bake Hardening Behavior of Al­
Mg­Si Alloys with Multi-Step Aging Process
. . . . . . . . . . . . . . . . . . . . . . . . Yasuo Takaki, Tetsuya Masuda,
Equo Kobayashi and Tatsuo Sato .
Kinetics of Solid-State Reactive Diffusion in the (Sn­Ni)/Cu
System
. . . . . . . . . . . . . . Misako Nakayama and Masanori Kajihara .
Effect of Cooling Rate on Phase Transformation and Microstructure of Nb­Ti Microalloyed Steel
. . . . . . . Su Zhao, Donglai Wei, Rongbin Li and Li Zhang .
The Effects of Anodization Treatment on the Microstructure and
Fatigue Behavior of 7075-T73 Aluminum Alloy
. . . . . . . . Teng-Shih Shih, Tin-Hou Lee and Ying-Jhe Jhou .
Micostructure and Magnetic Properties in Nanostructured Fe
and Fe-Based Intermetallics Produced by High-Pressure
Torsion
. . . . . . Akihide Hosokawa, Hideyuki Ohtsuka, Tiantian Li,
Seiichiro Ii and Koichi Tsuchiya .
Compositional Transition Layer around Growing LPSO in
Mg97Zn1Y2 Cast Alloys
. . . . . . . . . . . . . . . . . . Takanori Kiguchi, Shuhei Matsunaga,
Kazuhisa Sato and Toyohiko J. Konno .
Practical Applicability and Limitation of Representative Volume
Element Approach to Model Creep Behaviors of Metal Matrix
Composites
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wook Jin Lee, Yi Je Cho,
Yoonsuk Choi and Yong Ho Park .
The Kinetics of Isothermal Hydrogen Reduction of Nanocrystalline Fe2O3 Powder (Express Regular Article)
. . . . . . . . . . . Geon-Yong Lee, Joon-Phil Choi, Jun-Il Song,
Sung-Soo Jung and Jai-Sung Lee .
Influence of Mg/Si Ratio on Nanocluster Formation in Al-Mg-Si
Alloys with Constant Mg + Si Concentration
. . . . . . . . . . . . . . . . . . . . SeongNyeong Kim, JaeHwang Kim,
Equo Kobayashi and Tatsuo Sato .
Stability of {4 4 11} ©11 11 8ª Orientation in a {123} ©634ª
Aluminum Single Crystal Processed by Accumulative Roll
Bonding
. . . . . . . . . . . . . . . . . . . . . Keizo Kashihara, Yoshikazu Komi,
Daisuke Terada and Nobuhiro Tsuji .
On the Elastic Accommodation Between the Structural Units in
the LPSO Structures
. . . . . . . . . . . . . . . . . . . . . . . . Xinfu Gu and Tadashi Furuhara .
Microstructure and Mechanical Properties of the Extruded and
Aged Mg-6Al-2Sn-0.4Mn-xAg Alloys (x = 1, 2 and 3 mass%)
. . . . . . . . . . . . . . . . . . . . Hyeon-Taek Son and Yong-Ho Kim .
Assessment of Temperature and Pressure Dependence of Molar
Volume and Phase Diagrams of Binary Al­Si Systems
. . . . . . . . . . . . . . . . . . . Xuantong Liu and Katsunari Oikawa .
Relations between Parameters in Different Sublattice Configurations for CALPHAD-Type Thermodynamic Assessments
. . . . . . . . . . . . . . . . . . . . . . . Taichi Abe, Kiyoshi Hashimoto,
Ryoji Sahara and Cenk Kocer .
Interfacial Structure of Erbium Oxide Layer on SUS316
Substrate Formed by MOCVD Method
. . . . . . . . . . . . . . . . . . . . Takayuki Shinkawa, Kenji Matsuda,
Yoshimitsu Hishinuma, Katsuhiko Nishimura,
Teruya Tanaka, Takeo Muroga and Takahiro Sato .
Diffusion of Carbon in Niobium and Molybdenum
. . . . . . . . . . . . . . . . . . . . . . . . . Jun-ichi Imai, Osamu Taguchi,
Gyanendra Prasad Tiwari and Yoshiaki Iijima .
MECHANICS OF MATERIALS
.
7-1051
.
7-1058
.
8-1257
.
8-1266
.
8-1274
.
8-1280
.
8-1286
.
9-1377
.
9-1383
. 10-1611
. 11-1647
. 11-1656
. 11-1662
. 11-1668
. 11-1673
. 11-1683
. 12-1781
. 12-1786
Effect of Aging Treatment on Microstructure and Mechanical
Properties of Ti27Nb2Ta3Zr ¢ Titanium Alloy for Implant
Applications
. . . . . . . . . . . . Liqiang Wang, Zhengjie Lin, Xueting Wang,
Qiwei Shi, Weiqing Yin, Di Zhang,
Zhongtang Liu and Weijie Lu
Impact Response of Circular Aluminum Tube Filled with
Polyurethane Foam (Express Regular Article)
. . . . . . . . . . . . . . . Nirut Onsalung, Chawalit Thinvongpituk
and Kulachate Pianthong
Pronounced Structural Rejuvenation in Zr50Cu40Al10 Metallic
Glass Strained by Torsional Straining at Elevated Temperature
(Rapid Publication)
. . . . . . . . . . . . . . . . . . . . . . Fanqiang Meng, Koichi Tsuchiya
and Yoshihiko Yokoyama
Microstructure Evolution of AZ80 Magnesium Alloy during
Multi-Directional Forging Process
. . . . . . . . . . . . . . . . . Qingfeng Zhu, Lei Li, Zhiqiang Zhang,
Zhihao Zhao, Yubo Zuo and Jianzhong Cui
Prediction of the Constitutive Equation for Uniaxial Creep of a
Power-Law Material through Instrumented Microindentation
Testing and Modeling
. . . . . . . Hidenari Takagi, Ming Dao and Masami Fujiwara
In-Situ Observation and Acoustic Emission Analysis for SCC of
MgCl2 Droplet in SUS304 Stainless Steel
. . . . . . . . . . . . . . . . . . . . Mitsuharu Shiwa, Hiroyuki Masuda,
Hisashi Yamawaki, Kaita Ito and Manabu Enoki
Hall­Petch Tensile Yield Stress and Grain Size Relation of
Al­5Mg­0.5Mn Alloy in Friction-Stir-Processed and PostThermal-Exposed Conditions (Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . . Chun-Yi Lin, Truan-Sheng Lui,
Li-Hui Chen and Fei-Yi Hung
Effect of Contact Configuration on the Tribological Performance
of Micro-Textured AISI 1045 Steel under Oscillating Conditions (Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minhaeng Cho
Effects of Stress Triaxiality on Damage Evolution from PreExisting Hydrogen Pores in Aluminum Alloy (Rapid
Publication)
. . . . . . . Hiroyuki Toda, Hideki Tsuruta, Keitaro Horikawa,
Kentaro Uesugi, Akihisa Takeuchi,
Yoshio Suzuki and Masakazu Kobayashi
Formation Mechanisms of Beachrocks in Okinawa and
Ishikawa, Japan, with a Focus on Cements
. . . . . . . . . . . . . . . . . . . . Takashi Danjo and Satoru Kawasaki
Twinning Induced Plasticity and Work Hardening Behavior of
Aged Cu­Ni­Si Alloy
. . . . . . . . . . . . . . . . . . . . . . . Akiyoshi Araki, Warren J. Poole,
Equo Kobayashi and Tatsuo Sato
Effects of Hydrogen Water Chemistry on Stress Corrosion
Cracking Behavior of Cold-Worked 304L Stainless Steel in
High-Temperature Water Environments
. . . . Wen-Feng Lu, Chien-Lin Lai and Jiunn-Yuan Huang
Effects of Cryo-Treatment on Corrosion Behavior and Mechanical Properties of Laser-Welded Commercial Pure Titanium
. . . . . . . . . . . Yanping Zhu, Changyi Li and Lianyun Zhang
Influence of Cold Rolling on Diffusion Bondability of SUS316L
Stainless Steel Sheets (Rapid Publication)
. . . . . . . . . . . . . . . . . . . . Takashi Harumoto, Yuya Yamashita,
Osamu Ohashi and Takashi Ishiguro
Transitory Embrittlement of Polycrystalline Silver by Liquid
Gallium
. . . . . . . . . . . . . . . . . . . . Kohei Arakawa, Koudai Yamamoto,
Kazumichi Sakai and Hirokazu Koizumi
Microstructure and Mechanical Properties of AlternatelyCompressed AZ31 Mg Alloy in Two Orthogonal Directions
(Rapid Publication)
. . . . . . . . . . . . . . . . . . . . Hyukjoon Kwon, Mamoru Mabuchi
..
1-141
..
1-207
..
1-220
..
2-270
..
2-275
..
2-285
..
2-357
..
2-363
..
2-383
..
3-493
..
3-501
..
3-506
..
3-511
..
3-633
..
4-653
iv
and Yasumasa Chino
Modeling and Simulations of Experimentally-Observed Dislocation Substructures Based on Field Theory of Multiscale
Plasticity (FTMP) Combined with TEM and EBSD-Wilkinson
Method for FCC and BCC Poly/Single Crystals
. . . . . . . . . . . . . . . . . . . T. Hasebe, M. Sugiyama, H. Adachi,
S. Fukutani and M. Iida
In Situ Observation of Pseudoelasticity in Fe3Al Single Crystals
with D03 Structure
. . . . . . . . . . . . . . . . . . . . . Hiroyuki Y. Yasuda, Yasuhiro Oda,
Takenori Maruyama, Mayumi Ojima
and Yoshitaka Adachi
Molecular Dynamics Simulation of Ga Penetration along Al
Grain Boundaries under a Constant Strain Rate Condition
(Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . Kayoung Yun and Ho-Seok Nam
Low-Stress Creep Deformation in Long-Term Aged Ferritic
Heat-Resistant Steel (Express Regular Article)
. . . . . . . . . . . . . . . . Shigeto Yamasaki, Masatoshi Mitsuhara,
Ken-ichi Ikeda, Satoshi Hata and Hideharu Nakashima
High Temperature Tensile Properties and Its Mechanism in LowCarbon Nb-Bearing Steels
. . . . . . . Suguru Yoshida, Teruhisa Okumura, Hiroshi Kita,
Jun Takahashi and Kohsaku Ushioda
Twinning of
Atomic Group Rotation Mechanism for f1012g
HCP Crystal Materials
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shan Jiang
Effects of 4 GPa Pressure Heat Treatment on Micro-Mechanical
Properties of Brass by Nanoindentation
. . . . . . . . . . . . . . Ma Yu-quan, Li Ji-meng and Lin Hong-ju
Prediction of Tempered Martensite Hardness Incorporating the
Composition-Dependent Tempering Parameter in Low Alloy
Steels
. . . . . . . . . . . . . . . . . . . . . . . . Singon Kang and Seok-Jae Lee
Tribological Behavior of Ti-5Al-2.5Sn, Ti-10V-2Fe-3Al and Ti38Al Carburized via Current Heating Technique with Graphite
Powders
. . . . . . . Chatdanai Boonruang and Atcharawadi Thong-on
Effects of Magnesium on Wear Resistance of H13 Steel (Express
Regular Article)
. . . Liangliang Wang, Jing Li, Bo Ning and Yongyong Li
A Novel “Fiber-Spacing” Model of Tensile Modulus Enhancement by Shortening Fibers to Sub-Millimeter in an InjectionMolded Glass Fiber Reinforced Polymer Bulk Molding
Compound (GFRP-BMC)
. . . . . . . . . . . . . . . . . . . Michael C. Faudree, Yoshitake Nishi
and Michael Gruskiewicz
Improvement in the Unconfined Compressive Strength of Sand
Test Pieces Cemented with Calcium Phosphate Compound by
Addition of Calcium Carbonate Powders
. . . . . . . . . . . . G. G. N. N. Amarakoon, Takefumi Koreeda
and Satoru Kawasaki
Indenter Geometry Affecting Indentation Behaviors of the ZrBased Bulk Metallic Glass
. . . . . . . . . . . . . . . . . . . . . . . . . Hu Huang and Hongwei Zhao
Effect of Homogenization Treatment on the Microstructure and
Mechanical Property Evolutions of As-Cast Al­Cu Alloy
during High-Pressure Torsion
. . . . . . . . . . Mohamed Ibrahim Abd El Aal, Ho Yong Um,
Kang Hyun Choi and Hyoung Seop Kim
Effects of Temperature and Strain Rate on Plastic Deformation
of Ultrafine-Grained Copper Prepared by Equal-Channel
Angular Pressing
. . . . . . . . . . . . . Satoshi Okubo, Hiroki Abe, Yoji Miyajima,
Toshiyuki Fujii, Susumu Onaka and Masaharu Kato
Peierls Barrier of Screw Dislocation in bcc Iron at Finite
Temperature
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hideki Mori
Two-Dimensional Observation of Grain Boundary Sliding of
..
4-739
..
5-779
..
5-788
..
5-838
..
5-842
..
6-899
..
6-907
..
7-1065
..
7-1069
..
7-1073
..
7-1104
ODS Ferritic Steel in High Temperature Tension (Express
Regular Article)
. . . . . . . . . Hiroshi Masuda, Satoshi Taniguchi, Eiichi Sato,
Yoshito Sugino and Shigeharu Ukai
Mechanical Properties and Dislocation Substructure of Inconel
690 Alloy Impacted at Cryogenic Temperatures
. . . . . . . . . . . . . . . . . . . Woei-Shyan Lee and Ming-Chia Hsu
Structure of Iron-Based Cladding Layer on Al-Mg-Si Alloy
Coated by a Resistance Seam Welding Method
. . . . . . . . . . . . . . . . . . . . . Wenqin Wang, Tomiko Yamaguchi
and Kazumasa Nishio
Stress Shift to Tensile Side by the Interruption of Deposition
during Al and Cr Film Processing (Rapid Publication)
. . . . . . . . . . . . . . . . . . . . . . Junyoung Yu and Youngman Kim
Effect of Oxygen Content in WC-FeAl Powders on Microstructure and Mechanical Properties of Sintered Composites
Fabricated by Pulse Current Sintering Technique
. . . . . . . . . . . . . . . . . . . Ryoichi Furushima, Kiyotaka Katou,
Setsuo Nakao, Zheng Ming Sun, Koji Shimojima,
Hiroyuki Hosokawa and Akihiro Matsumoto
Damping Capacities of Mg­(0­9)%Sn Casting Alloys (Rapid
Publication)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Joong-Hwan Jun
Compressive Properties of Aluminum Foams Produced by
Replication Route using Spheroidal Calcium Chloride as
Space Holder (Express Rapid Publication)
. . . . . . J. A. Liu, F. Gao, Y. Q. Rao, C. L. Wu and Y. Liu
. . 10-1599
. . 11-1689
. . 11-1698
. . 11-1777
. . 12-1792
. . 12-1903
. . 12-1906
MATERIALS CHEMISTRY
..
..
..
..
8-1292
9-1391
9-1400
9-1405
. . 10-1525
. . 10-1531
Solvothermal Synthesis of Shape-Controlled Perovskite MTiO3
(M = Ba, Sr, and Ca) Particles in H2O/Polyols Mixed
Solutions
. . . . . . . . . . . . . . . . . . . . . . Takeshi Kimijima, Kiyoshi Kanie,
Masafumi Nakaya and Atsushi Muramatsu
High-Temperature Oxidation and Its Kinetics Study of Ti­Al and
Ti­V Alloys in Air
. . . . . . . . . . . . . . . Tomoshi Takahashi, Yoritoshi Minamino,
Hideyuki Hirasawa and Tadashi Ouchi
Experimental Determination of the Isothermal Section in a
Ternary Re­Cr­Nb System at 1500°C
. . . . . . . . . . . . . . . . . . . Shigeru Saito, Toshiyuki Takashima,
Katsumi Miyama, Toshio Narita, Taiichi Nagata,
Ideo Masuda and Kenichi Kajiwara
Improving Recycled Fiber by Applying In-Situ Aragonite
Calcium Carbonate Formation Process (Express Regular
Article)
. . . . . . Joobeom Seo, Jong Gyu Lee, Thenepalli Thriveni,
Chul Seoung Baek and Ji-Whan Ahn
Synthesis of Fine Iron­Cobalt Alloy Particles by the CoReduction of Precursors with Solvated Electrons in Sodium­
Ammonia Solution
. . . . . . . . . . . . . . . . . . . . . . . . Osamu Terakado, Yuichiro Uno
and Masahiro Hirasawa
Production of Titanium Dioxide Directly from Titanium Ore
through Selective Chlorination Using Titanium Tetrachloride
(Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . Jungshin Kang and Toru H. Okabe
Carbon Solubility in Liquid Iron Containing V, Mo and Ni
(Express Regular Article)
. . . . . . . . Do-Hyeong Kim, Min-Kyu Paek, Tae-Jung Kim,
Seung-Yeon Won and Jong-Jin Pak
3 KeV H2+ Irradiation to Li/Pd/Cu Trilaminar Neutron
Production Target for BNCT
. . . . . . . . . . . . . . . . . . . . . . . . . . Shintaro Ishiyama, Ryo Fujii,
Masaru Nakamura and Yoshio Imahori
Zone Refining of Aluminum and Its Simulation
. . . . . . . . . . . . . . . Masayoshi Nakamura, Mahiko Watanabe,
Kisaburou Tanaka, Atsushi Kirihata,
Tsunetaka Sumomogi, Hiroaki Hoshikawa
..
1-147
..
2-290
..
2-298
..
2-378
..
3-517
..
3-591
..
3-610
..
4-658
v
and Ichiro Tanaka .
Effects of Homogeneous Low Energy Electron Beam Irradiation
(HLEBI) on Water Absorption and Hydrolysis Suppression of
High Strength Polycarbonate
. . . . . . . . Shohei Ogawa, Junhua Quan, Yoshiki Yamazaki,
Masae Kanda, Takehisa Shibuya and Yoshitake Nishi .
Interfacial Reaction Mechanisms of Dilute Gas on Pt Electrode
by Using a Gas Controllable H2 « H+Electrolyte « Pt Cell
. . . . . . . . . . . . . . . . . . . . . Kazuya Kazama and Shuji Harada .
Microelectrochemical Study on the Surface Oxidation of Pt: The
Effects of Crystal Orientation and Grain Boundary (Rapid
Publication)
. . . . . . . . . . . . . . . . . . . . . . . . . . . Mayu Sasaki, Yu Sugawara,
Izumi Muto and Nobuyoshi Hara .
Refinement of Nanoporous Copper: A Summary of MicroAlloying of Au-Group and Pt-Group Elements
. . . . . . Zhenhua Dan, Fengxiang Qin and Nobuyoshi Hara .
Chemical and Structural Properties of Polyethyleneimine Film
Coated on a SiO2 Substrate in Different Concentrations
. . . . . . . . . . . . . . . . . . . . Hyung-Joong Yun, Hyobong Hong,
Jouhahn Lee and Chel-Jong Choi .
Direct Observation of Pit Initiation Process on Type 304
Stainless Steel (Rapid Publication)
. . . . . . . . . . . . . . . . . . Aya Chiba, Izumi Muto, Yu Sugawara
and Nobuyoshi Hara .
Dissolution Behavior of Platinum in Na2O­SiO2-Based Slags
. . . . . . . . . . Chompunoot Wiraseranee, Takeshi Yoshikawa,
Toru H. Okabe and Kazuki Morita .
The Influence of Fluoride Anion on the Equilibrium between
Titanium Ions and Electrodeposition of Titanium in Molten
Fluoride­Chloride Salt
. . . . . . . . . . . . . . . Jianxun Song, Qiuyu Wang, Xiaobo Zhu,
Jungang Hou, Shuqiang Jiao and Hongmin Zhu .
Improvement of Bending Modulus and Impact Value in
Injection-Molded Short Carbon Fiber Reinforced Polyetheretherketone with Homogeneous Low-Voltage Electron Beam
Irradiation
. . . . . . Yoshitake Nishi, Réda Ourahmoune, Masae Kanda,
Junhua Quan, Michael C. Faudree and Michelle Salvia .
Preparation of Ni-Aluminide Surface Layer Containing Hafnium
by Molten-Salt Electrodeposition and Cyclic-Oxidation Resistance
. . . . . . . . . . . . . . . . . Kazuki Tabata, Hisato Fujii, Naka Sato
and Motoi Hara .
Role of Chain Length and Type on the Adsorption Behavior of
Cationic Surfactants and the Silica Floatability (Express
Regular Article)
. . . . . . . . Junhyun Choi, Jeongsik Hong, Kyuhyeong Park,
Gahee Kim, Yosep Han, Seungkon Kim and Hyunjung Kim .
Selective Dissolution of Pt­Co Binary Alloys and Surface
Enrichment of Platinum in Sulfuric Acid Solution (Express
Regular Article)
. . . . . . . . . . . . . . . . . . Azusa Ooi, Yoshinao Hoshi, Eiji Tada
and Atsushi Nishikata .
Development of Nanoporous Copper Foams by Chemical
Dealloying of Mechanically Alloyed Al­Cu Compounds
. . . . . . . . . . Seungjin Nam, Hyungyung Jo, Heeman Choe,
Donghwan Ahn and Hyunjoo Choi .
Smelting of Metallic Titanium from an Oxide Flux Using a CaOStabilized ZrO2 Solid-Electrolyte Electrode
. . . . . . . . . . . . . . Ichiro Seki, Kazuhiro Nagata, Jun Tanabe,
Shin-ichi Yamaura and Xin-Min Wang .
Effect of Impurity Fe Concentration on the Corrosion Behavior
of Mg-14 mass%Li-1 mass%Al Alloy (Rapid Publication)
. . . . . . . Taiki Morishige, Kumiko Ueno, Masahiro Okano,
Takayuki Goto, Eiji Nakamura and Toshihide Takenaka .
Preparation of Iron Doped Hydroxyapatite Microsphere by Mist
Process
. . . . . . . . . . . . . . . . . . . Mitsutaka Sato and Atsushi Nakahira .
The Effect of Surface Machining on the High-Temperature
.
.
.
4-664
4-671
4-677
.
4-735
.
5-796
.
5-801
.
5-857
.
7-1083
.
.
8-1299
8-1304
Oxidation of a Single Crystal Ni-Based Superalloy
. . . . . . . . . . . . . . . Nairong Sun, Lanting Zhang, Zhigang Li,
Feng Sun, Xianping Dong and Aidang Shan
Nano Structure and Electrochemical Behavior of the Rust
Formed on Ni Bearing Steel after Exposure Tests in a Tropical
Indian Environment
. . . . . . . . . . . . . . . . . . . . . . . . T. Nishimura and N. Rajendran
Corrosion Behavior of Superalloys in a LiCl-Li2O Molten Salt
(Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . . Jong-Ho Lim and Woo-Jin Jung
Multiphase Particle Simulation of Gas Bubble Passing Through
Liquid/Liquid Interfaces
. . . . . . . Shungo Natsui, Hifumi Takai, Takehiko Kumagai,
Tatsuya Kikuchi and Ryosuke O. Suzuki
Rust Preventive Properties by Using Polarization Curve
Measurement on the Metal Coated with the Rust Preventive
Oil (Express Regular Article)
. . . . . . . Daisuke Iwashima, Sayaka Hirata, Naoki Nagase,
Masahiko Hatakeyama and Satoshi Sunada
Fabricating Silver Nanoparticles on Thin Silicon Nanowalls for
Highly Sensitive Surface-Enhanced Raman Scattering
. . . . . . . . . . . . . . . . . . . . . . . . Shu Ning Wen and Jiann Shieh
Quantitative Nondestructive Evaluation of Plastic Deformation
in Carbon Steel Based on Electromagnetic Methods
. . . . . . . . . . . Hong-En Chen, Shejuan Xie, Zhenmao Chen,
Toshiyuki Takagi, Tetsuya Uchimoto
and Kensuke Yoshihara
Calculation of Thermodynamic Properties of Cu-Ce Binary
Alloy and Precipitation Behavior of Cu6Ce Phase
. . . . . . . . . Haihong Li, Xueqin Sun and Shangzhou Zhang
Influence of Oxygen Content on the Inclusion Formation and
Pitting Corrosion Resistance of Hyper Duplex Stainless Steels
(Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . Soon-Hyeok Jeon, Do Haeng Hur,
Hye-Jin Kim and Yong-Soo Park
Electrochemical Behavior of Type 316L Stainless Steel during
Cyclic Deformation under Cell Culturing (Express Regular
Article)
. . . . . . . . Kotaro Doi, Sayaka Miyabe and Shinji Fujimoto
. . 10-1540
. . 10-1547
. . 10-1618
. . 11-1707
. . 11-1762
. . 12-1800
. . 12-1806
. . 12-1816
. . 12-1872
. . 12-1890
MATERIALS PROCESSING
.
.
.
.
.
.
8-1311
8-1344
8-1350
9-1414
9-1419
9-1506
. 10-1536
Experimental Verification and Accuracy Improvement of Gas
Entrapment and Shrinkage Porosity Simulation in High
Pressure Die Casting Process
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yukio Otsuka
Four-Dimensional Morphological Evolution of an Aluminum
Silicon Alloy Using Propagation-Based Phase Contrast X-ray
Tomographic Microscopy
. . . . . . . . . . . . . . Emine Begum Gulsoy, Ashwin J. Shahani,
John W. Gibbs, Julie L. Fife and Peter W. Voorhees
Alloy Designs of High-Entropy Crystalline and Bulk Glassy
Alloys by Evaluating Mixing Enthalpy and Delta Parameter
for Quinary to Decimal Equi-Atomic Alloys
. . . . . . . . . . . Akira Takeuchi, Kenji Amiya, Takeshi Wada,
Kunio Yubuta, Wei Zhang and Akihiro Makino
Evaluation of Surface Crack in Resistance Spot Welds of ZnCoated Steel
. . . . . . . . . . . . . . . Young Gon Kim, In Ju Kim, Ji Sun Kim,
Youn Il Chung and Du Youl Choi
Assessment of the Thermal Conductivity of Yttria-Stabilized
Zirconia Coating (Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kyong Jun An
Entangled Duplex Structure and Polycrystalline Globule Formation through Multistep Liquid-Phase Separation in Cu­Fe­
Zr­B Alloys
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Takeshi Nagase
Change in Molten Metal Pressure and Its Effect on Defects of
Aluminum Alloy Die Castings
. . . . . . . . . . . . . . . . . . . . . . . . . . Yasushi Iwata, Shuxin Dong,
..
1-154
..
1-161
..
1-165
..
1-171
..
1-188
..
2-304
vi
Yoshio Sugiyama and Hiroaki Iwahori
Effects of Tensile Prestress Level on Impact Value of 50 vol%
Continuous Unidirectional 0 Degree Oriented Carbon Fiber
Reinforced Epoxy Polymer (CFRP)
. . . . . . . . . Yoshitake Nishi, Takumi Okada, Soushi Okada,
Mitsuru Hirano, Masumi Matsuda,
Atsushi Matsuo and Michael C. Faudree
Impact Value of CFRP/Ti Joint Reinforced by Nickel Coated
Carbon Fiber
. . . . . . . . . . . . . . Yoshitake Nishi, Sho Ishii, Shigehito Inui,
Atsushi Kasai and Michael C. Faudree
Pulsed Current Activated Synthesis and Consolidation of
Nanostructured MoSi2­NbSi2 Composite and Its Mechanical
Properties (Rapid Publication)
. . . . . . . . . . . . . . . . . . . . . . . Hyoung-Gon Jo and In-Jin Shon
Microstructural and Electrical Properties of Copper­Titanium
Alloy Dispersed with Carbon Nanotubes via Powder Metallurgy Process
. . . . . . . . . . Hisashi Imai, Katsuyoshi Kondoh, Shufeng Li,
Junko Umeda, Bunshi Fugetsu and Makoto Takahashi
Microstructure and Mechanical Properties of Cu­40%Zn­
0.5%Cr Alloy by Powder Metallurgy
. . . . . . . . . . Hisashi Imai, Shufeng Li, Katsuyoshi Kondoh,
Yoshiharu Kosaka, Takuya Okada, Koji Yamamoto,
Motoi Takahashi and Junko Umeda
Fabrication and Catalytic Decoloration Capacity of Nanodendritic Metals
. . . . . . . . . . . . . Masataka Hakamada, Takayuki Matsuzawa
and Mamoru Mabuchi
Surficial Chemical States of Li3N Synthesized on Lithium Target
for Boron Neutron Capture Therapy
. . . . . . . . . . . . . . . . Shintaro Ishiyama, Yuji Baba, Ryo Fujii,
Masaru Nakamura and Yoshio Imahori
Indium Tin Oxide Films with Low Resistivity at Room
Temperature Using DC Magnetron Sputtering with Grid
Electrode (Express Regular Article)
. . . . . . . . . Ho-Nyun Lee, Jin-Young Hur, Hyun Jong Kim,
Min Hyung Lee and Hong Kee Lee
Effect of Powder Preheating Temperature on the Properties of
Titanium Coating Layers Manufactured by Kinetic Spraying
(Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . . . Kee-Ahn Lee, Myeong-Ju Lee,
Ji-Sang Yu and Hyung-Jun Kim
Influence of Mo and W on High Temperature Hardness of M7C3
Carbide in High Chromium White Cast Iron
. . . . . . . . . . . . . . . . Kaoru Yamamoto, Sudsakorn Inthidech,
Nobuya Sasaguri and Yasuhiro Matsubara
Synthesis of ZnO Crystals with Octahedral Morphology through
Thermal Evaporation Technique in Air
. . . . . . . . . . . . . . . . . Min-Sung Kim and Geun-Hyoung Lee
Effects of Electro-Magnetic Stirring on Microstructural Evolution and Mechanical Properties in Semi-Solid Forming of a
Hypo-Eutectic Al­Si­Cu­Ni­Mg Alloy
. . . . . . . . . . . . . . . . . . . . Young-Soo Jang, Byoung-Hee Choi
and Chun-Pyo Hong
Solidification Structure of Al­Cu and Sn­Cu­Sb Alloys
Obtained by Casting through Induction Stirring Using
Permanent Magnet
. . . . . Fumitaka Otsubo, Satoshi Nishida and Hidenori Era
Characterization of Spinel-Structured Iron Oxide Nanoparticles
Synthesized by Heating of ¡-FeOOH Platelets in TetraEthylene Glycol
. . . . . . . . . Hawa Latiff, Mikio Kishimoto, Akari Horiuchi,
Atsushi Seki, Ryoichi Miyamoto, Hideto Yanagihara,
Tatsuya Oda, Nobuhiro Ohkohchi and Eiji Kita
Two-Step Die Motion for Die Quenching of AA2024 Aluminum
Alloy Billet on Servo Press
. . . . . . . . . . . . . . . . . . . . . . . . . Jae-Yeol Jeon, Ryo Matsumoto
and Hiroshi Utsunomiya
Microstructure Observation of Preform for High Performance
..
..
..
..
2-311
2-318
2-323
2-391
..
3-522
..
3-528
..
3-534
..
..
..
3-539
3-605
3-622
..
4-684
..
4-690
..
4-693
..
5-806
..
..
5-813
5-818
VGCF/Aluminum Composites
. . . . . . . . . . . Okyoung Lee, Moonhee Lee, Yongbum Choi,
Kenjiro Sugio, Kazuhiro Matsugi and Gen Sasaki
Effects of Secondary Air Flows on Thermal Characteristics and
Particle Behavior in Flame Spray Process (Express Regular
Article)
. . . . . . . . . . . Jae Bin Lee, Dong Hwan Shin, Yeo Hae Lee,
Dae Yun Kim and Seong Hyuk Lee
Characteristics of Austenite Grain Refinement by High-Speed
Large-Reduction Forging ®Production Technology for Fine
Grained Steel by Large Deformation Forging III®
. . . . . . . . . . . . . . . . . . . Masaru Miyake and Yasuhiro Sodani
Defects Modification of TiB2­TiC Composite Phase Coating
Resistance Spot Welding Electrode via Friction Stir Processing
. . . . . . . . . . . . . . . . . . . . . . . Ping Luo, Z. X. Xie, S. J. Dong,
A. Z. Yangli and Wei Yang
Microstructure of Cr­V­Mo Steel Processed by Recrystallization
and Partial Melting and Its Effect on Mechanical Properties
. . . . . . . . Yi Meng, Sumio Sugiyama and Jun Yanagimoto
Macro-Segregation and Microstructural Characteristics in RheoDiecasting of a High Strength Al­4.8 mass%Si­0.7 mass%Mg
Alloy
. . . . . . . . . . . . . . . . . . . . Byoung-Hee Choi, Young-Soo Jang,
Byung-Geun Kang and Chun-Pyo Hong
Crystallization Behaviors of Copper Smelter Slag Studied Using
Time-Temperature-Transformation Diagram (Express Regular
Article)
. . . . . . . . . . . . . . . Yong Fan, Etsuro Shibata, Atsushi Iizuka
and Takashi Nakamura
Microstructure and Mechanical Properties of TiAl3/Al2O3 in situ
Composite by Combustion Process
. . . . . . . . . . Tran Duc Huy, Hiroshi Fujiwara, Reo Yoshida,
Do Thanh Binh and Hiroyuki Miyamoto
The NO2 Response of Solid Electrolyte Sensors Made Using
ZnFe2O4 Electrodes
. . . . . . . . . . . Qi Wang, Yue Tu, Danyu Jiang and Tao Feng
Work Hardening and Microstructural Development during HighPressure Torsion in Pure Iron
. . . . Akihide Hosokawa, Seiichiro Ii and Koichi Tsuchiya
Simultaneous Synthesis and Consolidation of Nanostructured
MgSiO3­Mg3Al2Si3O12 Composite and Its Mechanical Properties (Rapid Publication)
. . . . . . . . . . . Hyun-Su Kang, In-Jin Shon, Jung-Mann Doh
and Jin-Kook Yoon
The Temperature Field Measurement of Billet Based on MultiInformation Fusion
. . . . . . . . . . . . . . . . . . . . Ma Jiaocheng, Liu Jun, Yang Qiang
and Chen Liangyu
Mechanism for Development of Faults Originating from Compound Inclusions in the Forging Process of 30Cr2Ni4MoV
Heavy Ingots
. . . . . . . . . Wen Long Zhao, Qing Xian Ma and Shi Li Zha
Improvement of Powder Properties and Chemical Homogeneity
of Partially Alloyed Iron Powder by a Nanopowder Process
(Express Regular Article)
. . . . . . . . . . . Joon-Phil Choi, Geon-Yong Lee, Jun-Il Song,
Joon-Chul Yun and Jai-Sung Lee
Effects of Macro- and Micro-Porosity on Mechanical Properties
of a Porous Ti-6Al-4V Alloy Fabricated Using Solid-State
Space-Holder Method
. . . . . . . . . . . . . . . . . Yorina S. F. Lantang, Equo Kobayashi,
Hiroyasu Tezuka and Tatsuo Sato
Improved Deposition Efficiency of Cold-Sprayed CoNiCrAlY
with Pure Ni Coatings and Its High-Temperature Oxidation
Behavior after Pre-Treatment in Low Oxygen Partial Pressure
. . . . . . . . . . . . . . . . . . . . . . Kang-Il Lee and Kazuhiro Ogawa
Influences of Residual Stress Induced by Cutting on Subsequent
Scratch Using Smooth Particle Hydrodynamic (SPH)
..
5-827
..
5-850
..
6-911
..
6-917
..
6-921
..
6-930
..
6-958
..
7-1091
..
7-1094
..
7-1097
..
7-1109
..
8-1319
..
8-1324
..
8-1356
..
9-1428
..
9-1434
vii
. . . . . . . . . . . . . . Hongwei Zhao, Peng Zhang, Hongda Liu,
Chuang Liu, Da Tong, Lin Zhang, Luquan Ren,
Xiaolong Dong and Shanshan Liang
Effect of Dry Grinding of Pyrophyllite on the Hydrothermal
Synthesis of Zeolite Na-X and Na-A (Express Regular Article)
. . . . . . . . . . . . . . Wantae Kim, Woori Chae, Soyeon Kwon,
Kwanho Kim, Hoon Lee and Sangbae Kim
In-Situ Monitoring of Oxide Ion Induced Breakdown in
Amorphous Tantalum Oxide Thin Film Using Acoustic
Emission Measurement
. . . . . . . . . . . . Takashi Tsuchiya, Kaita Ito, Shogo Miyoshi,
Manabu Enoki and Shu Yamaguchi
Mechanical Properties and Tool Life of Friction-Stir-Welded
DP590 Using the Si3N4 Tool
. . . . . . . . . . . . . . . . . . . . . . . . . . . Young-Gon Kim, In-Ju Kim,
Ji-Sun Kim and Jae-Hyun Park
Tensile Strength of Al/ABS-CFRP Joint Reinforced by Nickel
Coated Carbon Fiber Cloth
. . . . . . . . . . . . Kazuma Shiraishi, Shigehito Inui, Sho Ishii,
Yoshihito Matsumura and Yoshitake Nishi
Microstructural Evolution of As-Cast 3.5%NiCrMoV Steel
Containing Centimeter-Scale Grain Structure during Reheating and Plastic Deformation
. . . . . . . . . . . . . . . . . . . . Wen Long Zhao and Qing Xian Ma
The Effects of Fe2P and Fe3P Intermediate Equilibrium Phases
on Glass-Forming Ability of Fe76Si9B10P5 Bulk Metallic Glass
. . . . . . . . . . . . . . . . . . . . Akira Takeuchi and Akihiro Makino
Microstructure and Mechanical Properties of Cobalt-Based
Alloys Strengthened with Tantalum Carbide Powder via
Vacuum Sintering and HIP Treatments (Express Regular
Article)
. . . . . . . . . . . . . . Shih-Hsien Chang and Chien-Chung Chen
Microstructure and Magnetic Property of Sm2Fe17 Nanopowder
Synthesized by Modified Reduction-Diffusion Process (Rapid
Publication)
. . . . . . . . . Joon-Chul Yun, Su-Min Yoon, Geon-Yong Lee,
Joon-Phil Choi and Jai-Sung Lee
Quantitative Relation between Mn and S for Mechanical
Properties of Flake Graphite Cast Iron
. . . . . . . . . . . . . . . . . . . . . . . Toshitake Kanno and Ilgoo Kang
Detection of Fracture in Structural Adhesive Using RFID Tags
. . . Nariaki Ohashi, Takayuki Shiraiwa and Manabu Enoki
Macro-Segregation Characteristics in Semi-Solid Forging of a
High Strength Al-4.8Si-0.7Mg Alloy
. . . . . . . . . . . . . . . . . . . . Byoung-Hee Choi, Young-Soo Jang,
Byung-Keun Kang and Chun-Pyo Hong
The Effects of HIP, Solution Heat Treatment and Aging
Treatments on the Microstructure and Mechanical Properties
of Sintering Cobalt-Based Alloys Strengthened with Tantalum
Carbide Additives (Express Regular Article)
. . . . . . . . . . . . . . Shih-Hsien Chang and Chien-Chung Chen
Effects of Casting Design and Reduced Pressure on Mold Filling
of Molten Aluminum Alloy in Expendable Pattern Casting
Process
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sadatoshi Koroyasu
Fabrication of Yttria Stabilized Zirconia-Silicon Carbide Composites with High Strength and High Toughness by Spark
Plasma Sintering of Mechanically Milled Powders
. . . . . . . . . . . Nurul Nadiah Mahmud, Sanjay Kumar Vajpai
and Kei Ameyama
Effect of Stress Field on Closure of Center Defects in Symmetric
Rolling and Asymmetric Rolling of Round Billets
. . . . . . . . . . . . . . . . . . . . Tatsuro Katsumura, Takaaki Iguchi,
Hideto Kimura and Jun Yanagimoto
Parallel Implementation for Phase-Field Simulation of Flow
Effect on Dendritic Growth with GPU Acceleration
. . . . . . . . . . . . . Changsheng Zhu, Jinfang Jia, Hong Zhang,
Rongzhen Xiao and Li Feng
Textural Through-Thickness Inhomogeneity of Interstitial-Free
..
9-1440
..
9-1488
. . 10-1553
. . 10-1557
. . 10-1564
. . 10-1568
. . 10-1575
. . 10-1623
. . 10-1630
. . 11-1716
. . 11-1722
. . 11-1727
. . 11-1755
. . 12-1820
. . 12-1827
. . 12-1834
. . 12-1841
Steel and Its Influence on Plastic Anisotropy Prediction
. . . . . . . . . . . . . . . . . . . . . . . Anmin Yin, Quan Yang, Fei He,
Xiaochen Wang and Christ Glorieux
Thermodynamic Assessment of Fe-B-P-Cu Nanocrystalline Soft
Magnetic Alloys for Their Crystallizations from Amorphous
Phase
. . . . . . . . . . . . . . . . . . . . Akira Takeuchi and Akihiro Makino
Strategy for Electrodeposition of Highly Ductile Bulk Nanocrystalline Metals with a Face-Centered Cubic Structure
. . . . . . . Isao Matsui, Yorinobu Takigawa, Daisaku Yokoe,
Takeharu Kato, Tokuteru Uesugi and Kenji Higashi
Synthesis of Lu2O3:Eu3+ Luminescent Ceramic Powder Embedded in SiO2 Matrix
. . . . María Luz Carrera Jota, Margarita García Hernández,
Antonieta García Murillo, Felipe de Jesús Carrillo Romo,
Ernesto Rivera Becerril, Angel de Jesús Morales Ramírez,
Haggeo Desirena Enrriquez and Elder de la Rosa Cruz
. . 12-1847
. . 12-1852
. . 12-1859
. . 12-1867
ENGINEERING MATERIALS AND
THEIR APPLICATIONS
Effects of Fine Particle Peening on Oxidation Behavior of
Nickel­Titanium Shape Memory Alloy
. . . . . . . . . . . . . . . . . . . Shoichi Kikuchi, Yutaka Kameyama,
Masayoshi Mizutani and Jun Komotori
Effect of Micro-Alloying Elements on Deformation Behavior in
Mg­Y Binary Alloys
. . . . . Hidetoshi Somekawa, Yoshiaki Osawa, Alok Singh,
Kota Washio, Akira Kato and Toshiji Mukai
Wear and Friction Properties of Mg­Zn­Y Alloy with Dispersion
of Quasi-Crystalline Phase (Rapid Publication)
. . . . . . . . . . . . . . . . Hidetoshi Somekawa, Atsushi Shimoda,
Tomoko Hirayama, Takashi Matsuoka and Toshiji Mukai
Development of Multilayer Steels for Improved Combinations of
High Strength and High Ductility (Overview)
. . . . . Toshihiko Koseki, Junya Inoue and Shoichi Nambu
Discharge-Charge Property of Lead-Acid Battery Using NanoScale PbO2 as Cathode Active Material
. . . . . . . . . . . . . . . . . . . . . Masami Taguchi, Toshihiro Sasaki
and Hiroki Takahashi
Effect of Friction Stir Processing on the Microstructural
Evolution and Tensile Behaviors of an ¡/¢ Dual-Phase
Mg­Li­Al­Zn Alloy (Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chung-Wei Yang
Evolution of Texture in a 2.8%Si Non-Oriented Electrical Steel
Annealed at 1100°C (Rapid Publication)
. . . . . . . . . . . . . . . . . . . . . . . . . . . Na Li, Liang Ma, Li Xiang,
Shengtao Qiu and Pei Zhao
Effect of Microstructure on the Mechanical Properties of
Magnesium Composites Containing Dispersed Alumina
Particles Prepared Using an MM/SPS Process
. . . . . . . . . . . . . . . . . . . Hiroshi Fujiwara, Suguru Hamanaka,
Shigehiro Kawamori and Hiroyuki Miyamoto
Relation of n-Value to Critical Current for Local Sections and
Overall Sample in a SmBCO Coated Conductor Pulled in
Tension
. . . . . . . . . . Shojiro Ochiai, Hiroshi Okuda, Shinji Nagano,
Michinaka Sugano, Sang-Song Oh,
Hong-Soo Ha and Kozo Osamura
Effect of Annealing on Magnetostrictive Properties of Fe­Co
Alloy Thin Films
. . . . . . . Takashi Nakajima, Teruaki Takeuchi, Isamu Yuito,
Kunio Kato, Mikiko Saito, Katsuhiro Abe, Toshio Sasaki,
Tetsushi Sekiguchi and Shin-ichi Yamaura
High Adhesive Force between Laminated Sheets of Copper
and Polyurethane Improved by Homogeneous Low Energy
Electron Beam Irradiation (HLEBI) Prior to Hot-Press
. . . . . . . . Masato Uyama, Naoki Fujiyama, Takumi Okada,
Masae Kanda and Yoshitake Nishi
Creation of Adhesive Force between Laminated Sheets of
..
1-176
..
1-182
..
1-216
..
2-227
..
2-327
..
2-371
..
2-387
..
3-543
..
3-549
..
3-556
..
3-561
viii
Polytetrafluoroethylene (PTFE) and Polyethylene (PE) by
Homogeneous Low Energy Electron Beam Irradiation Prior to
Hot-Press for Bio-Adaptable Application
. . . . . . Masato Uyama, Masae Kanda and Yoshitake Nishi
Preparation and Properties of Ball-Milled MgH2/Al Nanocomposites for Hydrogen Storage
. . . . . . . . . . . . . . . . . Hayao Imamura, Yoshiyuki Hashimoto,
Takanori Aoki, Tomoki Ushijima
and Yoshihisa Sakata
Impact Damping in NiMnGa/Polymer Composites (Rapid
Publication)
. . . Jorge Feuchtwanger, Jon Aurrekoetxea, Javier Zurbitu,
Jose L. Vilas, Luis M. León, Jose M. Barandiaran,
Hideki Hosoda and Volodymyr A. Chernenko
Preparation of Nano-Structured La0.6Sr0.4Co0.2Fe0.8O3¹¤ Cathode
for Protonic Ceramic Fuel Cell by Bead-Milling Method
(Express Regular Article)
. . . . . . . . . . . . Hiroyuki Oda, Yuji Okuyama, Takaaki Sakai
and Hiroshige Matsumoto
Effects of Deposition Temperature on the Electrochemical
Deposition of Zinc Oxide Thin Films from a Chloride
Solution (Express Regular Article)
. . . . . . . . Shigeo Hori, Toshimasa Suzuki, Tsukasa Suzuki,
Shuhei Miura and Shuichi Nonomura
Influences of pH Value and Deposition Time on HA/TiO2
Coatings Deposited by Electrochemical Method
. . . . . . . . . . . . . . Xu Min, Ma Fengcang, Liu Ping, Li Wei,
Liu Xinkuan, Chen Xiaohong,
He Daihua and Geng Fang
Measurement of Seebeck Coefficient and Conductive Behaviors
of Bi2Te3¹xSex (x = 0.15­0.6) Thermoelectric Semiconductors
without Harmful Dopants
. . . . Mei Fusa, Naoaki Yamamoto and Kazuhiro Hasezaki
Carbon-Dispersed WC­FeAl Hard Material Fabricated by Mechanical Milling and Subsequent Pulsed Current Sintering
. . . . . . . . . . . . . . . . . Hiroyuki Nakayama, Keizo Kobayashi,
Kimihiro Ozaki and Kotaro Kikuchi
Photocatalytic Activity of the Oxide Layer Formed on NiTi
Surface through Thermal Oxidation Process
. . . . . . . . . . . . . . . . . . . . . . . . Kouta Sakamoto, Kento Yokoi,
Aki Saito and Naofumi Ohtsu
The Preparation and Corrosion Performance of Self-Assembled
Monolayers of Stearic Acid and MgO Layer on Pure
Magnesium
. . . . . . . . . . . . . . . Liying Qiao, Yong Wang, Weilang Wang,
Marta Mohedano, Caihua Gong and Jiacheng Gao
Properties and Rapid Consolidation of Nanostructured TiC and
TiC­TiAl Hard Materials by High-Frequency Induction
Heating (Rapid Publication)
. . . . . . . . In-Jin Shon, Hanjung Kwon and Hyoung-Gon Jo
In-Beam Stress Corrosion Tests for Welded 308 Stainless Steel
in Pure Water at 473 K
. . . . . . . . . . . . . . . . Yoshiharu Murase, Norikazu Yamamoto,
Tadashi Shinohara, Akira Tahara,
Toshiho Ogata and Kazuhiro Kimura
Effect of Ni Contents on Microstructures and Mechanical
Properties for (Ti0.8Mo0.2)C-Ni Cermets
. . . . . . . . . . . . . . . . . . Hiroyuki Hosokawa, Kiyotaka Katou,
Koji Shimojima, Ryoichi Furushima
and Akihiro Matsumoto
A New Low-Cost ¢-Type High-Strength Titanium Alloy with
Lower Alloying Percentage for Spring Applications
. . . . . . . . . . . . . . . . . . Xiaoli Zhao, Shuchen Sun, Lei Wang,
Yandong Liu, Jidong He and Ganfeng Tu
Diffusivity and Solubility of Cu in a Reactor Pressure Vessel
Steel Studied by Atom Probe Tomography
. . . . . . . . . . . . . . . . . . . Masaki Shimodaira, Takeshi Toyama,
Fumihiko Takahama, Naoki Ebisawa, Yasuko Nozawa,
Yasuo Shimizu, Koji Inoue and Yasuyoshi Nagai
Effects of Fabrication Method, Shape, Strain and Temperature on
..
..
3-566
3-572
..
3-629
..
4-722
..
4-728
..
6-937
..
6-942
..
6-947
..
8-1332
..
8-1337
..
8-1363
..
9-1445
..
9-1451
..
..
9-1455
9-1460
Conductive Properties of Smart Stress-Memory Patch
. . . . . . Fang Yuan, Takayuki Shiraiwa and Manabu Enoki
Preparation of Supersaturated Fe­In Alloy Thin Films by IonPlating Process
. . . . . . Mao Amano, Yumiko Ezaki, Kadek Fendy Sutrisna
and Yoshihito Matsumura
Wet Preparation of Organic-Stabilizer-Free Urchin Structured
Nickel Fine Particles and Their In Situ TEM Observation at
High Temperatures
. . . . . . . . Takashi Narushima, Ren Lu and Tetsu Yonezawa
Tape Length-Dependence of Critical Current and n-Value in
Coated Conductor with a Local Crack
. . . . . . . Shojiro Ochiai, Hiroshi Okuda and Noriyuki Fujii
Morphologies of Some Graphites in Ductile Cast Irons (Express
Regular Article)
. . . . . . Takamichi Hara, Takahiro Kitagawa, Kenta Kuroki,
Seiji Saikawa, Kiyoshi Terayama,
Susumu Ikeno and Kenji Matsuda
Reduced Electrical Resistivity of Ternary Solder Alloy of Tin­
Copper­Sulfur: An Anti-Oxidative Role of Sulfur in Binary
Solder Alloy of Tin­Copper (Rapid Publication)
. . . . . . . . . . Sang Hoon Kim, Yong-Jin Kim, Tae-Soo Lim,
Dong-Yeol Yang and Sangsun Yang
Effect of Annealing on Magnetic Properties of Ultrafine JetMilled Nd-Fe-B Powders
. . . . . . . . . . . . . . . Michihide Nakamura, Masashi Matsuura,
Nobuki Tezuka, Satoshi Sugimoto, Yasuhiro Une,
Hirokazu Kubo and Masato Sagawa
Shear Strength of Adhesive Lamination Joint of Aluminum and
CFRP Sheets Treated by Homogeneous Low Energy Electron
Beam Irradiation Prior to Lamination Assembly and Hot-Press
. . . . . . . . . . . . . . . . . . . . . . . . . Takumi Okada, Masae Kanda,
Michael C. Faudree and Yoshitake Nishi
Effects of O2 and N2 Flow Rate on the Electrical Properties of
Fe-O-N Thin Films (Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . . Yukiko Ogawa, Daisuke Ando,
Yuji Sutou and Junichi Koike
Magnetic Susceptibility of Zr-Cu Binary Alloys (Express Rapid
Publication)
. . . . . . . . . . . . . . . . . . . . . . . Seung-Pyo Hong, Yeong-Mu Ko
and Chung-Seok Kim
Reverse Current Conduction Mechanism of Transient Voltage
Suppression Diode under Electrostatic Discharge Stress
. . . . . . . Daoheung Bouangeune, Ye-Ji Lee, Deok-Ho Cho,
Kyu-Hwan Shim and Chel-Jong Choi
Effect of Plastic Deformation on the Proof Strength and
Electrical Conductivity of Copper-Magnesium Supersaturated
Solid-Solution Alloys
. . . . . . . . . . . . . . . . . . . . . . . . . Yuki Ito, Hirotaka Matsunaga,
Hiroyuki Mori and Kazunari Maki
Adhesive Resistance to Peeling Force of PTFE/PDMS Laminated Sheet Assisted by Homogeneous Low Voltage Electron
Beam Irradiation at 77 K
. . . . . . . . . . Chisato Kubo, Takumi Okada, Masato Uyama,
Masae Kanda and Yoshitake Nishi
Prediction of Intermetallic Compound Formation Sequences in
Pseudo Binary Diffusion Couples: Experimental Examinations for (Sn-xZn)/Cu (x = 2, 5, 10, 15, 20 and 25 mass%) by
a Kinetic Model with Thermodynamic Data Using MDR
Diagram
. . . . . . . . . . . . . . . . Shinichi Terashima and Tsutomu Sasaki
Synthesis and Characterization of Mesoporous Silica from
Anorthite-Clay Mineral: Role of Mechanical Activation
(Express Regular Article)
. . . . . . . . . . . . . Junhyun Choi, Yosep Han, Donghyun Kim,
Soyeon Park, Jayhyun Park,
Jaikoo Park and Hyunjung Kim
..
9-1464
..
9-1471
..
9-1474
..
9-1479
..
9-1500
..
9-1513
. . 10-1582
. . 10-1587
. . 10-1606
. . 10-1634
. . 11-1733
. . 11-1738
. . 11-1742
. . 11-1750
. . 12-1895
ix
ENVIRONMENT
Size, Shape, Composition and Separation Analysis of Products
from Waste Refrigerator Recycling Plants in South Korea
(Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . . . . . Kihong Kim, Heechan Cho,
Jinan Jeong and Sookyung Kim
Recycling of Rare Earth Magnet Waste by Removing Rare Earth
Oxide with Molten Fluoride
. . . . . . Osamu Takeda, Kiyotaka Nakano and Yuzuru Sato
Geological Exploration of Beachrock through Geophysical
Surveying on Yagaji Island, Okinawa, Japan
. . . . . . . . Ryosuke Kubo, Satoru Kawasaki, Koichi Suzuki,
Shinji Yamaguchi and Toshiro Hata
Zn and Fe Recovery from Electric Arc Furnace Dusts
. . . . . . . . . . . . . F. F. Grillo, J. L. Coleti, D. C. R. Espinosa,
J. R. Oliveira and J. A. S. Tenório
Control of Electrical and Thermal Properties by 8 vol% Al2O3
Distribution States in Zn­50Sn for AC-Low Voltage Fuses
. . . . . . . . . . . . . . . . . Kazuhiro Matsugi, Hiromu Matsumoto,
Yong-Bum Choi, Gen Sasaki,
Ken-ichiro Suetsugu and Koji Fujii
Lead Trace Removal from Waste Electronic Scraps by Organic
Acids
. . . . . . . . . . . . . . . Doyun Shin, Jinki Jeong, Byung-su Kim,
Sadia Ilyas and Jae-chun Lee
Reclaim of Rare Earth Metals from Bond Magnets by Means
of Thermally Activated Semiconductors (TASC) (Express
Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y. Tsukada, H. Takahashi,
M. Kaneko and J. Mizuguchi
Effect of Orifice Introduction on the Pneumatic Separation of
Spherical Particles
. . . . . . . . . . . . . . . . . . . . . . Naohito Hayashi and Tatsuya Oki
Degradation of Chlorinated Organic Compounds by Mixed
Particles of Iron/Iron Sulfide or Iron/Iron Disulfide
. . . . . . . . . . . . . . . . . . . . . Masahiro Shiba, Md. Azhar Uddin,
Yoshiei Kato and Tomoshige Ono
Effect of Orifice Introduction on Floating Characteristics of
Cuboid Particles Simulating Tantalum Capacitors in Pneumatic Separation Column
. . . . . . . . . . . . . . . . . . . . . . Naohito Hayashi and Tatsuya Oki
Surface-Grinding Kinetics for the Concentration of PGMs from
Spent Automobile Catalysts by Attritor Surface Grinding
(Express Regular Article)
. . . . . . . . . . . . . . . . . . . . . . . Gangfeng Liu, Tomoki Ichinose,
Ayumu Tokumaru and Shuji Owada
Adsorption of Co(II) and Mn(II) Ions on Mesoporous Silica
SBA15 Functionalized with Amine Groups (Express Regular
Article)
. . . . . . . . . . . . Seongmin Kim, Seungsoo Park, Yosep Han,
Joonchul Choi and Jaikoo Park
Separation of Tin, Silver and Copper from Waste Pb-free Solder
Using Hydrochloric Acid Leaching with Hydrogen Peroxide
(Express Regular Article)
. . . . . . . . . . Sookyung Kim, Jae-chun Lee, Kwang-sek Lee,
Kyoungkeun Yoo and Richard Diaz Alorro
..
1-198
..
2-334
..
2-342
..
2-351
..
..
3-577
3-586
..
3-616
..
4-700
..
4-708
..
6-952
..
6-978
..
9-1494
. . 12-1885
Special Issue on Strength of Fine Grained Materials
®60 Years of Hall­Petch® (Number 1)
PREFACE
. . . . Shin Takeuchi, Masaharu Kato and Takahito Ohmura . .
60 Years of Hall-Petch: Past to Present Nano-Scale Connections
(Overview)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ronald W. Armstrong . .
Superior Strength in Ultrafine-Grained Materials Produced by
SPD Processing (Overview)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ruslan Z. Valiev . .
Hall­Petch Relationship and Dislocation Model for Deformation
1-1
1-2
1-13
of Ultrafine-Grained and Nanocrystalline Metals (Overview)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Masaharu Kato .
On the Yield Stress of Bulk Nano Grained Polycrystals
(Overview)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G. Saada .
Effect of Grain Boundary Segregation of Interstitial Elements on
Hall­Petch Coefficient in Steels (Overview)
. . . . . . . . . . . Setsuo Takaki, Daichi Akama, Nobuo Nakada
and Toshihiro Tsuchiyama .
A Practical Meso-Scale Polycrystal Model to Predict Dislocation
Densities and the Hall­Petch Effect
. . . . . . . . . . . . . . . . . . . . H. Lim, S. Subedi, D. T. Fullwood,
B. L. Adams and R. H. Wagoner .
On the Roles of Grain Size Dispersion and Microscale Hall­
Petch Relation on the Plastic Behavior of Polycrystalline
Metals
. . . . . . . . . . . . . . . . . . . . Stéphane Berbenni, Francis Wagner
and Nathalie Allain-Bonasso .
Hall­Petch Breakdown at Elevated Temperatures
. . . . . . . . . . . . . Joachim H. Schneibel and Martin Heilmaier .
Mechanical Responses of Copper Bicrystalline Micro Pillars
with ­3 Coherent Twin Boundaries by Uniaxial Compression
Tests
. . . . . . . . . . . . . . . . . Tomoyuki Hirouchi and Yoji Shibutani .
Dislocation Multiplication from the Frank­Read Source in
Atomic Models
. . . . . . . . . . . . . . . . Tomotsugu Shimokawa and Soya Kitada .
Atomistic Simulation of Shear Mode Deformation of Nanocrystalline Copper with Different Grain Sizes
. . . . . . . . . . . . . . . . . . . . . . . Yoshiaki Kogure and Yosio Hiki .
Correlation between Continuous/Discontinuous Yielding and
Hall­Petch Slope in High Purity Iron (Rapid Publication)
. . . . . . . . . . . . . . Si Gao, Akinobu Shibata, Meichuan Chen,
Nokeun Park and Nobuhiro Tsuji .
Yielding Behavior and Its Effect on Uniform Elongation of Fine
Grained IF Steel
. . . . . . . . . . . . . . . . . . Si Gao, Meichuan Chen, Shuai Chen,
Naoya Kamikawa, Akinobu Shibata
and Nobuhiro Tsuji .
Effect of Ferrite Grain Size on Dynamic Tensile Properties of
Ultrafine Grained Low Carbon Steels with Various Chemical
Compositions
. . . . . . . . . . . . . . . . . . . Yoshitaka Okitsu and Nobuhiro Tsuji .
EBSD Analysis of Microstructure Evolution of Pure Iron
Subjected to Sliding Wear and Related Change in Vickers
Microhardness
. . . . . . . . . . . . . . . . . Yoshihisa Kaneko and Taiyo Sugimoto .
Microstructure and Mechanical Properties in Progressively
Drawn Pearlitic Steel
. . . . . . . . . . . . . . . . . . . . . . . . Jesús Toribio, Beatriz González
and Juan-Carlos Matos .
Application of Harmonic Structure Design to Biomedical Co­
Cr­Mo Alloy for Improved Mechanical Properties
. . . . . . . . . . . . Choncharoen Sawangrat, Osamu Yamaguchi,
Sanjay Kumar Vajpai and Kei Ameyama .
Mechanical Properties of Bulk Ultrafine Grained Aluminum
Fabricated by Torsion Deformation at Various Temperatures
and Strain Rates
. . . . . . . . . . . . . . . . Sunisa Khamsuk, Nokeun Park, Si Gao,
Daisuke Terada, Hiroki Adachi and Nobuhiro Tsuji .
The Effect of Microstructure on Mechanical Properties of Forged
6061 Aluminum Alloy
. . . . . . . . . . . . . . . . . . . . . . . . . Manabu Nakai and Goroh Itoh .
Influence of Grain Refinement and Texture Evolution on the
Yield Strength of Mg Alloy Processed by Cyclic Extrusion
and Compression
. . . . . . . . . . . . . . . . . . . . . . . . . . . . Jinbao Lin, Qudong Wang,
Yanxia Chen and Xiaochao Cui .
.
1-19
.
1-25
.
1-28
.
1-35
.
1-39
.
1-44
.
1-52
.
1-58
.
1-64
.
1-69
.
1-73
.
1-78
.
1-85
.
1-93
.
1-99
.
1-106
.
1-114
.
1-120
x
Special Issue on In Situ TEM Observation of High Energy
Beam Irradiation (Number 3)
PREFACE
. . . . . . . . Somei Ohnuki, Nao Hashimoto, Erwan Oliviero,
Jonathan Hinks and Hattar Khalid .
In-Situ Observation of Radiation Damage Using a Combined
Facility of Electron Microscope and Heavy-Ion Accelerator(s)
®History and Future Prospectives® (Overview)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shiori Ishino .
Development of TEM Holder Generating In-Plane Magnetic
Field Used for In-Situ TEM Observation
. . . . . . . . Masashi Arita, Ryohei Tokuda, Kouichi Hamada
and Yasuo Takahashi .
A Triple Beam In-Situ Facility at Xiamen University
. . . . . . Bing Tang, Jian Zhang, Ruigang Ma, Yingjun Ma,
Qinghua Huang, Lihua Chen, Baoqun Cui,
Yazhao Wu, Ning Li and Weisheng Jiang .
Simulation of Transmission Electron Microscope Images of
Dislocations Pinned by Obstacles
. . . . . . . . . . Yuhki Satoh, Takahiro Hatano, Nobuyasu Nita,
Kimihiro Nogiwa and Hideki Matsui .
In Situ TEM Concurrent and Successive Au Self-Ion Irradiation
and He Implantation
. . . Claire Chisholm, Khalid Hattar and Andrew M. Minor .
New Approach to In Situ Observation Experiments under
Irradiation in High Voltage Electron Microscopes
. . . . . . . . . . . . . . . . Hiroaki Abe, Takahiro Ishizaki, Feng Li,
Sho Kano, Yanfen Li, Yuhki Satoh,
Takeshi Nagase and Hidehiro Yasuda .
Microstructural Evolution of an Ion Irradiated Ni­Mo­Cr­Fe
Alloy at Elevated Temperatures
. . . . . . . . . . . . . . . . Massey de los Reyes, Lyndon Edwards,
Marquis A. Kirk, Dhriti Bhattacharyya,
Kim T. Lu and Gregory R. Lumpkin .
Comparison between In-Situ and Post-Irradiation Cyclic Deformation Structures in Ni by 150 MeV Proton Irradiation
. . . . . . . . . . . . . . . Toshimasa Yoshiie, Koichi Sato, Qiu Xu,
Yoshihiro Ishi, Tomonori Uesugi,
Yasutosi Kuriyama and Yoshiharu Mori .
Effect of Additional Minor Elements on Accumulation Behavior
of Point Defects under Electron Irradiation in Austenitic
Stainless Steels
. . . . . . . . . . . . . . . . . Yoshihiro Sekio, Shinichiro Yamashita,
Norihito Sakaguchi and Heishichiro Takahashi .
Effect of Oxide Particles and Pre-Implanted Helium on Defect
Evolution during Electron Irradiation
. . . . . . . . . . . Siwei Chen, Kohei Tadaki, Yongming Wang,
Naoyuki Hashimoto and Somei Ohnuki .
Kink Band Formation in Graphite under Ion Irradiation at 100
and 298 K
. . . . . . . . . Jonathan A. Hinks, G. Greaves, Sarah J. Haigh,
Cheng-Ta Pan and Stephen E. Donnelly .
In Situ TEM Observation of Structural Changes in Rapidly
Solidified bcc Solid-Solution Phase in Ti­Cr Alloy Focusing
on Spontaneous Vitrification (SV)
. . . . . . . Takeshi Nagase, Satoshi Anada, Keita Kobayashi,
Hidehiro Yasuda and Hirotaro Mori .
In-Situ Observations of Microstructure Evolution in ElectronIrradiated Multi-Wall Carbon Nanotubes
. . . . . . . N. Hashimoto, S. Oie, H. Homma and S. Ohnuki .
In Situ Observation of Gold Chloride Decomposition in a
Confined Nanospace by Transmission Electron Microscopy
. . . . . . . . Keita Kobayashi, Ryo Kitaura, Katsuhiro Sasaki,
Kotaro Kuroda, Takeshi Saito and Hisanori Shinohara .
.
3-395
.
3-396
.
3-403
.
3-410
.
3-413
.
3-418
.
.
.
.
.
.
3-423
3-428
3-434
3-438
3-443
3-447
.
3-451
.
3-458
.
3-461
Special Issue on Laser Ultrasonics and Advanced Sensing
2013 (Number 7)
PREFACE
. . . . . . Kazushi Yamanaka, Ikuo Ihara and Makoto Ochiai . .
7-987
Detection of Trace Water Vapor Using SiOx-Coated Ball SAW
Sensor
. . . . . . . . . . . . . . . . . . . . . Kosuke Takayanagi, Shingo Akao,
Takayuki Yanagisawa, Noritaka Nakaso,
Yusuke Tsukahara, Satoshi Hagihara, Toru Oizumi,
Nobuo Takeda, Toshihiro Tsuji and Kazushi Yamanaka
Determination of Grain Size in Deep Drawing Steel Sheet by
Laser Ultrasonics
. . . . . . Anmin Yin, Quan Yang, Fei He and Huifang Xiao
Defect Detection in Thick Weld Structure Using Welding
In-Process Laser Ultrasonic Testing System
. . . . . . . Setsu Yamamoto, Takeshi Hoshi, Takahiro Miura,
Jun Semboshi, Makoto Ochiai, Yoshihiro Fujita,
Tsuyoshi Ogawa and Satoru Asai
High-Selectivity Ultrasonic Imaging of Closed Cracks Using
Global Preheating and Local Cooling
. . . . . . . . . . . . . . . . . . . . . . Yoshikazu Ohara, Koji Takahashi,
Kentaro Jinno and Kazushi Yamanaka
Development of Thickness Measurement System for Hot Steel
with Laser-Ultrasonic Wave Technology
. . . . . . . . . . . . . . . . N. Fuse, K. Kaneshige and H. Watanabe
Analysis on Nonlinear Ultrasonic Images of Vertical Closed
Cracks by Damped Double Node Model
. . . . . . . . . . . . . . . . . . . . . . . Kentaro Jinno, Azusa Sugawara,
Yoshikazu Ohara and Kazushi Yamanaka
Cavitation Damage Evaluation Using Laser Impacts
. . . . . . . . . . . . . . . . Tao Wan, Takashi Naoe, Takashi Wakui,
Masatoshi Futakawa and Katsuhiro Maekawa
Absolute Hydrophone Calibration to 40 MHz Using Ultrasonic
Far-Field
. . . . . . . . . . . . . . . . . . . Youichi Matsuda, Masahiro Yoshioka
and Takeyoshi Uchida
Frequency Domain Characteristics of Laser Surface Acoustic
Waves in Healthy Incisor and Initial Dental Caries
. . . . . . . . . . . . . . . . Ling Yuan, Kai H. Sun, Zhong H. Shen,
Qing P. Zhu, Xiao W. Ni and Jian Lu
Highly Sensitive Ball Surface Acoustic Wave Hydrogen Sensor
with Porous Pd-Alloy Film
. . . . . . . Toshihiro Tsuji, Ryosuke Mihara, Tomohiro Saito,
Satoshi Hagihara, Toru Oizumi, Nobuo Takeda,
Tsuneo Ohgi, Takayuki Yanagisawa, Shingo Akao,
Noritaka Nakaso and Kazushi Yamanaka
Imaging Defects in a Plate with Full Non-Contact Scanning
Laser Source Technique
. . . . . . . . . . . . . . . . . . . Takahiro Hayashi, Morimasa Murase,
Natsuki Ogura and Tsunaji Kitayama
..
7-988
..
7-994
..
7-998
..
7-1003
..
7-1011
..
7-1017
..
7-1024
..
7-1030
..
7-1034
..
7-1040
..
7-1045
..
8-1113
..
8-1114
..
8-1117
..
8-1122
Special Issue on Advanced Materials for Hydrogen Energy
Applications II (Number 8)
PREFACE
. . . . . . . . . . . . . . . . . . . Shin-ichi Orimo, Yumiko Nakamura,
Kazuhiro Ishikawa, Hiroyuki Saitoh and Min Zhu
Hydrogenation of Anodized Aluminum and Crystal Growth of
Formed Hydride at High Pressure and High Temperature
. . . . Hiroyuki Saitoh, Seiichi Kato and Masahiko Katagiri
Raman and Infrared Spectroscopic Studies on Li4RuH6 Combined with First-Principles Calculations
. . . . . . . . Toyoto Sato, Shigeyuki Takagi, Motoaki Matsuo,
Katsutoshi Aoki, Stefano Deledda,
Bjørn C. Hauback and Shin-ichi Orimo
Micro/Nano-Structural Transition and Hydrogen Absorption
Mechanism in Mg/Cu Super-Laminate Composites
. . . . . . . . . . . Koji Tanaka, Hiroyuki T. Takeshita, Ho Shin,
Kosuke Kurumatani, Tetsu Kiyobayashi,
Nobuhiko Takeichi, Hiroshi Miyamura
and Shiomi Kikuchi
Local Structural Analysis on Decomposition Process of
LiAl(ND2)4
. . . . . Kazutaka Ikeda, Toshiya Otomo, Hidetoshi Ohshita,
xi
Naokatsu Kaneko, Masami Tsubota, Kentaro Suzuya,
Fumika Fujisaki, Taisuke Ono, Toshiyuki Yamanaka,
Keiji Shimoda, Takayuki Ichikawa and Yoshitsugu Kojima
Improved Dehydrogenation and Rehydrogenation Properties of
LiBH4 by Nanosized Ni Addition
. . . . . . . . . . . . . . . . . . Hai-Wen Li, Yigang Yan, Etsuo Akiba
and Shin-ichi Orimo
Additive Effects of TiCl3 on Dehydrogenation Reaction of
LiAlH4
. . . . . . . . . . . . . . Shigehito Isobe, Yudai Ikarashi, Hao Yao,
Satoshi Hino, Yongming Wang,
Naoyuki Hashimoto and Somei Ohnuki
Dehydriding Property of NaBH4 Combined with Mg2FeH6
. . . . . . . . Guanqiao Li, Motoaki Matsuo, Stefano Deledda,
Bjørn C. Hauback and Shin-ichi Orimo
Improving the Cyclic Stability of V­Ti­Mn bcc Alloys Using
Interstitial Elements
. . . Hyunjeong Kim, Kouji Sakaki and Yumiko Nakamura
Catalytic Effect of Multi-Wall Carbon Nanotubes Supported
Nickel on Hydrogen Storage Properties of Mg99Ni Prepared
by Hydriding Combustion Synthesis
. . . . . . . . . . . . . . . . . . . . . . . . . . . Lingjun Wei, Zhengwei Cui,
Yunfeng Zhu and Liquan Li
Hydrogen Sorption Behaviors of a Core­Shell Structured
Mg@Fe Composite Powder
. . . . . . . Jianxin Zou, Sheng Long, Lifu Zhang, Chong Lu,
Xi Chen, Xiaoqin Zeng and Wenjiang Ding
Hydrogen Absorption and Desorption Behavior of Magnesium
Hydride: Incubation Period and Reaction Mechanism
. . . . . . . . . . . . . . . . . . Nobuhiko Takeichi, Yasuhiro Sakaida,
Tetsu Kiyobayashi and Hiroyuki T. Takeshita
Development of Ti­Zr­Mn Based Hydrogen Storage Alloys for
a Soft Actuator
. . . . . . . . Kouji Sakaki, Hyunjeong Kim, Hirotoshi Enoki,
Shin-ichi Yoshimura, Shuichi Ino and Yumiko Nakamura
Microscopic Study on Hydrogenation Mechanism of MgH2
Catalyzed by Nb2O5
. . . . Shigehito Isobe, Ayaka Umeda, Takenobu Wakasugi,
Tao Ma, Ryo Yamagami, Satoshi Hino, Yongming Wang,
Naoyuki Hashimoto and Somei Ohnuki
..
8-1129
..
8-1134
..
8-1138
..
8-1141
..
8-1144
Qudong Wang and Lifeng Ma
Effect of Antigravity-Suction-Casting Parameters on Microstructure and Mechanical Properties of Mg­10Al­0.2Mn­1Ca
Cast Alloy
. . . . . . . . . . . . Tomomi Ito, Masafumi Noda, Hisashi Mori,
Yoshio Gonda, Yuta Fukuda and Satoshi Yanagihara
Texture Formation and Room-Temperature Formability of
Rolled Mg­Zn­Ce Alloys
. . . . Yasumasa Chino, Xinsheng Huang, Kazutaka Suzuki,
Motohiro Yuasa and Mamoru Mabuchi
Effect of Pretreatment on Anticorrosive Performance of AZX911
Magnesium Alloy Treated with Anodizing from Phosphate
and Ammonium Salt Solution
. . . . . . . . . . . . . . . . . . . . . . . . . Makoto Hino, Koji Murakami,
Takahiro Hori and Teruto Kanadani
Effects of Microstructure on Discharge Behavior of AZ91 Alloy
as Anode for Mg­Air Battery
. . . . Motohiro Yuasa, Xinsheng Huang, Kazutaka Suzuki,
Mamoru Mabuchi and Yasumasa Chino
..
8-1180
..
8-1184
..
8-1190
..
8-1196
..
8-1202
..
8-1208
..
8-1209
..
8-1215
..
8-1219
..
8-1226
..
8-1232
Special Issue on Thermoelectric Conversion Materials VIII
(Number 8)
..
8-1149
..
8-1156
..
8-1161
..
..
8-1168
8-1175
Special Issue on Platform Science and Technology for
Advanced Magnesium Alloys, VI (Number 8)
PREFACE
. . . . . . . . . . . . . . . . . . . . . . . . Kenji Higashi, Yasumasa Chino
and Yorinobu Takigawa . .
In-Situ Study on Deformation Behavior of ZK60 Alloy
Processed by Cyclic Extrusion and Compression
. . . . . . . . . . . . . . . . . . . . Jinbao Lin, Qing Wang, Weijie Ren,
8-1179
PREFACE
. . . . . . . . . . Shigeru Katsuyama, Koji Akai, Hiroaki Anno,
Kazuhiro Hasezaki, Kaoru Kimura,
Michitaka Ohtaki and Masatoshi Takeda
Electronic and Local Crystal Structures of the ZrNiSn HalfHeusler Thermoelectric Material
. . . Hidetoshi Miyazaki, Teruaki Nakano, Manabu Inukai,
Kazuo Soda, Yudai Izumi, Takayuki Muro, Jungeun Kim,
Masaki Takata, Masaharu Matsunami,
Shin-ichi Kimura and Yoichi Nishino
Effect of Ball-Milling Conditions on Thermoelectric Properties
of Polycrystalline CuGaTe2
. . . . . . . . . . . Masaya Kumagai, Ken Kurosaki, Yuji Ohishi,
Hiroaki Muta and Shinsuke Yamanaka
Simulation of a Thermoelectric Module Having Parallelogram
Elements
. . . . . . . . . . . . . . . . . . . Xiangning Meng, Takeyuki Fujisaka,
Keita O. Ito and Ryosuke O. Suzuki
Thermoelectric Properties of Al­Ga­Pd­Re Icosahedral Quasicrystals
. . . . . . . . . . . . . . . . . . . . . . . . . . . . Y. Takagiwa, T. Kamimura,
J. T. Okada and K. Kimura
Thermoelectric Properties of Group 13 Elements-Triple Filled
Skutterudites: Nominal InxGa0.02Tl0.20Co4Sb12
. . . . . . . . . . . . . . . . Guanghe Li, Ken Kurosaki, Yuji Ohishi,
Hiroaki Muta and Shinsuke Yamanaka