VITA VMLC Product Information

Product information
VITA Farbkommunikation
VITA Farbkommunikation
VITA shade taking
VITA shade communication
VITA shade reproduction
VITA shade control
Date of issue: 05.14
VITA shade, VITA made.
Light-curing microparticle composite for fixed
and removable restorations for extraoral use.
Available in VITA SYSTEM 3D-MASTER and
VITA classical A1–D4 shades.
Perfectly matched with all indications
Veneering Material · VITAVM®LC
available in VITA SYSTEM 3D-MASTER and VITA classical A1 – D4 shades
Matched with all alloys
high gold content
reduced gold content
palladium-based
precious metal-free
titanium
For individualizing
VITA CAD-Temp®
For individualizing VITA teeth
VITA PHYSIODENS®
VITAPAN®
VITAPAN PLUS®
VITA VM LC is a light-curing microparticle composite for fixed and removable restorations
for extraoral use. All alloys and resin substructure materials may be used which are
suitable for veneering with composite according to the manufacturer’s instructions.
2
Reliable use thanks to unmistakable classification
Unmistakable classification
Resin
VITAVM®LC
VITAVM®CC
All-ceramics
VITAVM®7
Light Curing
Cold Curing
CTE of ceramic: 6.9 - 7.3
For veneering oxide-ceramic substructures in the CTE range of 7.2-7.9,
such as VITA In-Ceram ALUMINA
VITAVM®9
CTE of ceramic: approx. 9.0 - 9.2
For veneering zirconia substructures and for layering over VITABLOCS
and PM 9 restorations in the cut-back technique
VITAVM®11
CTE of ceramic: 11.2 - 11.6
Especially developed for individualizing restorations made from VITA SUPRINITY
(zirconia reinforced lithium silicate glass ceramic, ZLS).
Metal ceramics
VITAVM®13
VITAVM®15
CTE of ceramic: 13.1 - 13.6
For veneering metal substructures in the conventional CTE range (13.8 - 15.2)
CTE of ceramic: 15.5 - 15.7
For veneering metal substructures made of multi-indication alloys (16.0 - 17.2)
Indications
• Full and partial veneering of crowns, bridges, telescopic crowns, implant
suprastructures
• Veneering of acrylic substructures
• Inlays, veneers
• Metal-free crowns and three-unit anterior bridges as long-term temporary
restorations
• Individualizing long-term temporaries made from VITA CAD-Temp
• Veneering of substructures made from polyether ether ketone (PEEK) with a
ceramic filler content of up to 20 %, such as Bio HPP (bredent), as long-term
temporary restorations
• Veneering partially yttrium-stabilized ZrO2 substructures (CTE approx. 10,5 · 10-6 · K-1),
such as VITA In-Ceram YZ as long term temporary restorations
• Individualization of VITA acrylic teeth
• minor corrections of VITA ENAMIC restorations
3
Overview
More user friendliness
• VITA VM LC composite in the ergonomically-designed syringe made of special
light-proof plastic.
Increase reliability with PRE OPAQUE
• Increase bond strength to metal substructures with and without retentions,
particularly recommended when retentions are used
• Cure with a small amount of light even in areas of limited light penetration
• PRE OPAQUE allows one to obtain a uniform opaque layer
Save time with OPAQUE PASTE*
• Accelerated handling and fast polymerization
• Unsurpassed masking capacity and stability thanks to the homogeneous
visco-elastic consistency – also for retentions
• Avoid smears when covering retentions on CoCr structures with the
GINGIVA OPAQUE PASTE
• Consistent homogeneity of all OPAQUE PASTE materials
*available in the shades 1M1, 1M2, 2L1.5, 2M1, 2M2, 2M3, 3L1.5, 3M2, 3M3, 3R2.5, 4M2, A1–D4 (except for B1), GOL
Create superb esthetics with VM LC
• Excellent light-optical properties result in a restoration that can hardly be distinguished from a ceramic veneer.
• Particularly homogeneous distribution of the fine-particle, inorganic filler
• Utmost brilliance and translucency in accordance with natural teeth
Barely distinguishable:
tooth 11 VITA VM LC, 21 - 22 VITA VM 13
Unlimited ﬂexibility thanks to
• two shade systems for accurate shade-taking and shade reproduction:
VITA SYSTEM 3D-MASTER and VITA A1-D4 classical shades (except for B1),
• a comprehensive range of additional materials.
4
Superior properties
Präpolymer,
Monomer
angequollen
und
Prepolymer, durch
swollen
by monomer
and
Präpolymer,
durch
Monomer
angequollen
und
integrated
into the
network
in
das
einpolymerisiert
in
das Netzwerk
Netzwerk
einpolymerisiert
Excellent material
VITA VM LC combines superior physical properties and simple handling with
natural appearance.
Thanks to a refining process, the inorganic filler is surface functionalized and is an
active element in the polymerization process. Firmly integrated into the network
structure, it guarantees the desired material strength and achieves perfect surface
quality.
The additional use of a special prepolymer ensures outstanding processing
characteristics, a highly cross-linked matrix and reduced material shrinkage.
vernetztes
cross-linkedMonomer
monomer
vernetztes
Monomer
anorganischer
Mikropartikel-Füllstoff,
anorganischer
Mikropartikel-Füllstoff,
Inorganic microparticle
filler,
surface functionalized, integrated into polymer
oberflächenfunktionalisiert,
oberflächenfunktionalisiert,
network
ins
Polymernetzwerk
ins
Polymernetzwerk einpolymerisiert
einpolymerisiert
Abrasion resistance
A current abrasion simulation study* of resin veneering materials shows that
VITA VM LC Enamel features higher abrasion resistance in the comparison with
competitors’ products.
Abrasion depth [µm]
40
41
42
*Quintessenz Zahntechnik 2010;36(8):1074-1082
43
44
45
Material A
VITA VM LC EN
Material B
Abrasion depth according to wear simulation (VITA
diagram; data adopted from QZ 2010;36(8):1074-1082).
Shade stability and low plaque affinity
Due to its firmly integrated fine-particle filler, VITA VM LC is very homogeneous
and easy to polish. VITA VM LC exhibits unsurpassed shade stability and low
plaque affinity thanks to high surface density, limited water absorption and low
surface roughness.
Advantages of the microparticle composite
•
•
•
•
•
•
•
optimum processing characteristics for quick results
excellent shade stability and low plaque affinity
homogeneous and smooth surfaces
wide indication range
outstanding esthetic results and economical in terms of work input
reliable shade reproduction even in cases of limited space
accurate shade-taking and shade reproduction with VITA SYSTEM 3D-MASTER
and VITA classical shades A1–D4 shades (except for B1)
• Low investment cost - A wide range of currently available light-curing units
can be used for safe and complete curing of VITA VM LC. A list of suitable curing
units is included in the VITA VM LC working instructions.
5
Natural esthetics
Vivid play of colors with VITAVM®LC
The objective of any esthetic dental restoration is the reproduction of the
fluorescence and opalescence of natural teeth. Like all VITA VM materials,
VITA VM LC excels in its refraction and reflection behavior which can be compared
to that of enamel. The picture taken under UV light clearly shows that different
levels of fluorescence are found in natural teeth. Numerous VITA VM LC materials
contain pigments which add excellent fluorescence to the restorations.
The fine-particle inorganic filler with a primary particle size of a few nanometers is
responsible for the opalescent effect of VITA VM LC.
This is particularly apparent in the incisal materials.
Abundance of variations of opal effects
The VITA VM LC GINGIVA materials were developed especially to restore the
original gingival situation. The range of shades of the gingiva materials enables
the reproduction of gingiva with a natural appearance for patients from all cultural
backgrounds.
VITA VM LC GINGIVA OPAQUE PASTE is perfectly suited for covering retentions of
partial restorations. Smears are avoided!
6
Harmoniously matched additional materials for individualization
Example of an aged tooth with lifelike appearance and effect of depth. This tooth
was layered with BASE DENTINE, ENAMEL and individual additional materials.
VITAVM®LC ENAMEL
For brightening the mesial and distal
areas
VITAVM®LC EFFECT ENAMEL
To create a bluish-translucent incisal area
VITAVM®LC BASE DENTINE
colored with PAINT
To create incisal characteristics and
discoloration
EE9
EE9
PT5, PT8 + BD
ENL
ENL
EE6
CP4
VITAVM®LC CHROMA PLUS
Intensified shade of the cervical area with yellowish effect
VITAVM®LC EFFECT ENAMEL
For reddish-translucent discoloration in
the central and incisal areas
7
Efficient BASIC layering
VITA VM LC OPAQUE/OPAQUE PASTE
VITA VM LC ENAMEL
metal framework prepared
with bonding system metal
VITA VM LC PRE OPAQUE
VITA VM LC BASE DENTINE
BASIC layering
After applying VITA VM LC OPAQUE / OPAQUE PASTE, color-intensive VITA VM LC
BASIC layering consists of the application of two materials:
• BASE DENTINE
• ENAMEL
Thanks to the color-bearing BASE DENTINE, this two-layer variation is particularly
suited for the reproduction of the shade in case of thin walls and provides a reliable
and efficient solution. After the application of OPAQUE/OPAQUE PASTE, the user
is able to prepare a natural restoration with a life-like appearance with only two
layers.
8
Trouble-free handling
Color-coding of all components and the innovative design of the bottle and the
syringe guarantee utmost accuracy for the application and efficiency within the
entire VITA VM concept.
The new rotary piston syringe was developed especially for VITA VM LC.
The high quality of the materials is maintained thanks to the special lightproof
resin and air tightness of the syringe.
The rotary plunger allows controlled dosing of VITA VM LC to avoid excessive use
of material.
The click cap seals the syringe firmly and the design of the syringe ensures stable
placement on the working desk and avoids rolling.
9
Modular and efficient arrangement of assortments
VITAVM®LC BASIC KIT*
Basic kit for BASIC layering (also available as BASIC KIT SMALL with reduced
range of materials)
VITAVM®LC PROFESSIONAL KIT
For incorporating natural effects and characteristics
VITAVM®LC PAINT KIT
Shade-intensive material for shade effects and characteristics
VITAVM®LC GINGIVA KIT
Gingiva materials with natural effects
VITAVM®LC CREATIVE KIT
For individualizing acrylic teeth and for layering over restorations made from
VITA CAD-Temp
VITAVM®LC INLAY/VENEER KIT*
For metal-free restorations
VITAVM®LC TWO COLOR KIT
The starter kit is available in the shades 2M2/3M2 and A2/A3
*available in VITA SYSTEM 3D-MASTER and VITA classical A1 – D4 shades (except for B1).
10
Comprehensive, coordinated system
VITA Easyshade® Advance 4.0
VITA Easyshade Advance 4.0 is a further refinement of VITA Easyshade
Advance. This digital shade measurement device allows any user to determine
the shade of natural teeth or to verify restorations in a matter of seconds,
regardless of available lighting. The tooth shade measured is indicated in
VITA classical A1–D4, VITA SYSTEM 3D-MASTER and in VITABLOC shades.
Automatic activation, Bluetooth®, bleaching mode and a whole range of other
innovations guarantee maximum precision for even greater reliability and
comfort.
VITA Linearguide 3D-MASTER/VITA Toothguide 3D-MASTER®
With the VITA SYSTEM 3D-MASTER you can determine the correct tooth
shade swiftly and accurately. The new VITA Linearguide 3D-MASTER is an
alternative to the proven VITA Toothguide 3D-MASTER and features different
(linear) arrangement of the shade sample teeth.
VITA classical shade guide A1–D4
The original - for the determination of the tooth shade in the VITA classical
A1–D4 shades. With the additional VITA Bleached Shades, reliable shade
determination for bleached teeth is now available.
VITA ENAMIC®
VITA ENAMIC is the first hybrid dental ceramic in the world with a dual-network structure. Thanks to this innovative hybrid material, immense stability
as well as extraordinary elasticity are guaranteed for the first time. The
superior reliability of VITA ENAMIC, as well as its precision, edge stability
and corresponding milling accuracy, are all exceptional features.
VITA CAD-Temp®
Composite blocks are made of acrylate polymer for the fabrication of
long-term temporary restorations.
Perfect layering over long-term temporaries made from VITA CAD-Temp is
achieved with VITA VM LC. Both materials bond perfectly to one another.
VITA acrylic teeth VITA PHYSIODENS®, VITAPAN®,
VITAPAN PLUS®, VITA LINGOFORM®
All four lines of teeth offer the perfect solution for any indication.
Their material, which has proven its reliability over decades, features
unsurpassed abrasion behavior. VITA VM LC and VITA teeth – the perfect
combination.
For more information visit www.vita-zahnfabrik.com
11
VITA VM LC is available in VITA SYSTEM 3D-MASTER and
VITA classical A1–D4 shades. Shade compatibility with all
VITA 3D-MASTER and VITA classical A1–D4 materials is
ensured.
With the unique VITA SYSTEM 3D-MASTER, all natural
tooth shades can be systematically determined and perfectly
reproduced.
Please note: Our products must be used in accordance with the instructions for use.
We accept no liability for any damage resulting from incorrect handling or usage. The
user is furthermore obliged to check the product before use with regard to its suitability for the intended area of application. We cannot accept any liability if the product
is used in conjunction with materials and equipment from other manufacturers that
are not compatible or not authorized for use with our product. Furthermore, our
liability for the accuracy of this information is independent of the legal basis and, in
as far as legally permissible, shall always be limited to the value as invoiced of the
goods supplied, excluding value-added tax. In particular, as far as legally permissible,
we do not assume any liability for loss of earnings, indirect damages, ensuing
damages or for third-party claims against the purchaser. Claims for damages based
on fault liability (culpa in contrahendo, breach of contract, unlawful acts, etc.) can
only be made in the case of intent or gross negligence. The VITA Modulbox is not
necessarily a component of the product.
Date of issue of this information: 05.14
After the publication of these information for use any previous versions become
obsolete. The current version can be found at www.vita-zahnfabrik.com
The photo on the top of page 6 was provided with the kind support of Mr. Claude
Sieber.
VITA Zahnfabrik H. Rauter GmbH & Co. KG
Spitalgasse 3 · D-79713 Bad Säckingen · Germany
Tel. +49 (0) 7761/ 562-0 · Fax +49 (0) 7761/ 562-299
Hotline: Tel. +49 (0) 7761/ 562-222 · Fax +49 (0) 7761/ 562-446
www.vita-zahnfabrik.com · [email protected]
facebook.com/vita.zahnfabrik
1227E – 0514 (X.) S – Version (02)
VITA Zahnfabrik has been certified in accordance to the Medical Device Directive and
:
the following products bear the CE mark
VITAVM®LC · VITAVM®7 · VITAVM®9 · VITAVM®11 · VITAVM®13 · VITAVM®15
VITAVM®CC · VITA CAD-Temp® · VITA ENAMIC® · VITAPAN® · VITAPAN® PLUS
VITA PHYSIODENS® · VITA LINGOFORM®

Download Report