Reference standard: EN13162 GRANTS LEED THERMOSILENTRock RIGID WATER-REPELLENT ROCK WOOL PANELS USED FOR THERMAL AND ACOUSTIC INSULATION CREDITS CHARACTERISTICS ENVIRONRMENTAL METHOD OF USE Reazione al fuoco THERMAL INSULATION ACOUSTIC INSULATION REACTION TO FIRE ECO GREEN ASBESTOS FREE TAR FREE NON CHLORINE RECYCLABLE DANGEROUS EXHAUSTED FREE OIL FREE WASTE DESCRIPTION METHOD OF USE THERMOSILENTRock is a biosoluble rock wool panel with semi-oriented fibres, treated with thermally hardening resins, with a nominal density of 120 kg/m³. The panel is certified for exterior wall insulation applications according to ETAG 004 and for environmentally friendly building applications with EUCEB certification. The surface must be free from dust and dirt in general. They must be planar and uniform. Fix the starting profiles before bonding the panels (the first row of panels starting from the ground must be made of extruded polystyrene without a skin). It can be bonded with cement adhesives or paste (such as COATBOND, COATBOND FINE FIBER, RASOFINE ADHESIVE). Spread the adhesive onto the panel right around the edges and in dots in the middle or using a toothed trowel and proceed with the horizontal application from the bottom upwards. Wait at least 24 hours for the adhesive to harden, before plugging with special mushroom plugs. On wooden roofs the THERMOSILENTRock APPLICATION FIELDS THERMOSILENTRock is used in building for the thermal and acoustic insulation of perimeter walls according to the insulated exterior wall panel technique or as a thermal and acoustic insulator in roofs that have a low mass per unit area, such as ventilated and non-ventilated wooden roofs or sheet metal roofs. panel is usually laid straight onto the vapourproof sheet or vapour barrier, covering the surface of the roof completely. Thanks to its high density and compactness, the wooden strips for laying the roof tiles or curved tiles are laid straight onto the THERMOSILENTRock panel and held in place with nails or mechanical fastening to the starting boards (hence also including the THERMOSILENTRock panels). T TECHNICAL CHARACTERISTICS THERMOSILENTRock Standard Thickness (mm) Dimensions (mm) Thermal resistance RD (m² k/W) Compressive strength at 10% crushing Compressive strength (behaviour under point load) Thermal conductivity l (lD) Water vapour permeability µ Tensile strength Shear strength Specific heat Resistance to air flow Dynamic rigidity Fire reaction class Designation code 40506080100 120 (*)140 (*) 1200x6001200x6001200x6001200x6001200x6001200x6001200x600 1.101.351.652.202.753.303.85 EN826 30 kPa [ CS(10)30 ] UNI EN 12430 Fp ≥ 400 N EN 12667 0,036 W/mK EN 12086 1 EN 1607 > 10 KPa EN 12090 > 20 KPa EN 10456 c = 1.03 KJ/Kg EN 29053 60 KPas/m3 EN 29052-1 s’ = 20 MN/m3 EN 13501-1 classe A1 EN13162 MW EN 13162-T7-CS(10)30-TR10-PL(5)400-WS-WL(P)-MU1-SD20-CP2-AW0,95-Afr60 Acoustic insulation level. Acoustic absorption level. Impact noise transmission level. Durability of fire reaction, of thermal resistance and of compressive strength. NPD (*) On request. T.F. - 1.000 - 8/2013ing-c I • PER UN CORRETTO USO DEI NOSTRI PRODOTTI CONSULTARE I CAPITOLATI TECNICI INDEX • PER ULTERIORI INFORMAZIONI O USI PARTICOLARI CONSULTARE IL NOSTRO UFFICIO TECNICO • Internet: www.indexspa.it Informazioni Tecniche Commerciali [email protected] Amministrazione e Segreteria [email protected] Via G. Rossini, 22 - 37060 Castel D’Azzano (VR) - Italy - C.P.67 Index Export Dept. Tel. (+39)045.8546201 - Fax (+39)045.518390 [email protected] © INDEX Thermal insulation Marking socio del GBC Italia