CLEANPOX - Index S.p.A.

CLEA
I
GB
ONE-COM
PONENT
A
MONOCOM
NPO
X
USO
PRIMER
PER
PENETR
LASTRE
ANTE,
DI CEMENCONSO
PRIMER
LIDANT
TO AMIANT
PER
PENETR
E
LASTRE
O E INCAPS
ANTE,
ULANTE
DI CEMENCONSO
LIDANT
TO AMIANT
WATER
E
BASED
O E INCAPS
TO
BE
ULANTE
MECHANI
H2O
PONENTE
SPRAY
APPLICAT
ION
ACQUA
MESCOLA
MECCANI
RE
CAMENTE
FOR TEMPERA
APPLICAT
TURE
APPLICAR
ION
SPRUZZO
EA
KEEP
FROM AWAY
FROST
MINIMUM
+ 5°C
APPLICAR
E CON
RULLO
TO
BE
BY APPLIED
BRUSH
APPLICAR
PENNELLO
E CON
USE
SUITABLE
PROTECT
TEMPERA
DI APPLICAZ
TURA
ION
MIN.
IONE
STOCCAG
TEME
GIO:
IL GELO
Partit
Lot a
UTILIZZAR
DI PROTEZIO
E DISPOSITI
NE
INDIVIDUA
VI
LI
37060
Castel
d’Azza
no -
Verona
- ITALY
kg
PROFE
SSIONA
LE •
FOR
PROFE
SSIONA
LE USE
CLEANPOX
SPECIFIC SOLVENT-BASED LIQUID CLEANER
FOR EPOXY PRODUCTS ON CERAMIC TILES, NATURAL STONE
AND CONCRETE
ONLY
• CAMPI
WATERBAD’IMPIEGO
mano
SE PRIMER.
di fondo,
PRIMER,
prima è impiegato
e di
legarepenetrand degli
dispersion
interventiper la
le fibre o in profondità
bonifica
• MODALITÁ
e nell’ambie
di amianto
di demoliziondelle
Applicare
nell’impast
lastre
D’IMPIEGO
nte, superficial
superficie WATERBA
di
tutelando
o di e o di sopracope
e, non
cemento cemento
• CONSUMO
.
nono
I
SE PRIMER,
i lavoratori
ben
necessaria
Circa
amianto,rtura.amianto,
coesionate
0,250 .
come
WATERBA
addetti
• AVVERTEN
consente
mente tal quale,
kg/m2
alla , evitando di SE
- Applicare
deve
con
bonifica
ZE. per mano.
fissare
essere
pompe
- Il prodottoWATERBA
della così la loro
pulita. Airless
Mani
- Mescolare teme
copertura.
consigliate
a bassa
SE
• NORME
primail gelo. PRIMER
: due
pressione,
- Non
solo
mani.
dell’uso.
DI SICUREZZ
a temperatu
respirare
la
- Evitare
i vapori A
- Non il contatto
re superiori
gettare
aerosoli.
- In caso
con
a +5°C.
i residui
la pelle
di ventilazion
nelle e con
fognature.gli
e insufficient
occhi.
e usare
un apparecch
io respiratorio
• CAMPI
adatto.
WATERBAD’IMPIEGO
mano
SE PRIMER.
di fondo,
PRIMER,
prima è impiegato
e di
legarepenetrand degli
dispersion
interventiper la
le fibre o in profondità
bonifica
• MODALITÁ
e nell’ambie
di amianto
di demoliziondelle
Applicare
nell’impast
lastre
D’IMPIEGO
nte, superficial
superficie WATERBA
di
tutelando
o di e o di sopracope
e, non
cemento cemento
• CONSUMO
.
GB
nono
SE PRIMER,
i lavoratori
ben
necessaria
Circa
amianto,rtura.amianto,
coesionate
0,250 .
come
WATERBA
addetti
• AVVERTEN
consente
mente tal quale,
kg/m2
alla , evitando di SE
- Applicare
con
per mano. deve essere
bonifica
ZE.
fissare
pompe
- Il prodottoWATERBA
della così la loro
pulita. Airless
Mani
- Mescolare teme
copertura.
consigliate
a bassa
SE
• NORME
primail gelo. PRIMER
: due
pressione,
- Non
solo
mani.
dell’uso.
DI SICUREZZ
a temperatu
respirare
la
- Evitare
i vapori A
- Non il contatto
re superiori
gettare
- In caso
con aerosoli.
a +5°C.
i residui
la pelle
di ventilazion
nelle e con
fognature.gli
e insufficient
occhi.
e usare
un apparecch
io respiratorio
MIXED CALLY
VEICOLO
TO
BE
BY APPLIED
ROLLER
e
adatto.
USO PROFESSIONALE • FOR PROFESSIONALE USE ONLY
CLEANPOX
I
GB
D
F
NL
ONE-COMPONENT
A
MONOCOMPONENTE
• CAMPI D’IMPIEGO.
è consigliato per impermeabilizzare muri di fondazione in calcestruzzo.
• MODALITÁ D’IMPIEGO.
La superficie da trattare deve essere asciutta, pulita e priva di parti di distacco. Le
parti friabili vanno eliminate e ricostruite. Per l’adesività sulle superfici porose e
secche, è consigliabile la stesura una mano di diluita al 30% con acqua. va
mescolato prima dell’uso con trapani mmani di prodotto. Non eccedere nel consumo
per mano per non l’evaporazione dell’acqua contenuta nel prodotto applicato.
• CONSUMI.
0,500 kg/m2 per mano.
RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA
WATER-BASED ELASTOMER/BITUMINOUS COATING
RIVESTIMENTO ELASTOMOERO-BITUMINOSO ALL’ACQUA
WATER-BASED ELASTOMER/BITUMINOUS COATING
TO BE MEHANICALLY
MIXED
SPRAY
APPLICATION
TO BE APPLIED BY
PLASTERING TROWEL
H2O
MESCOLARE
MECCANICAMENTE
TO BE APPLIED
BY ROLLER
MINIMUM APPLICATION
TEMPERATURE
APPLICARE CON
RULLO
TEMPERATURA MIN.
DI APPLICAZIONE
APPLICARE A
SPRUZZO
I
GB
WATER-BASED ELASTOMER/BITUMINOUS COATING
WATER BASED
VEICOLO ACQUA
TO BE APPLIED
BY BRUSH
APPLICARE CON
PENNELLO
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
APPLICARE CON
FRATTAZZO
KEEP AWAY
FROM FROST
USE SUITABLE
PROTECTION
STOCCAGGIO:
TEME IL GELO
UTILIZZARE DISPOSITIVI
DI PROTEZIONE INDIVIDUALI
+ 5°C
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
D
F
NL
37060 Castel d’Azzano - Verona - ITALY
Partita
kg
e
• APPLICATIONS.
is recommended to waterproof foundations walls made in concrete.
• DIRECTIONS.
The surface to be treated has to be dry, clean and with no detaching parts. Weak
parts have to be eliminated and replaced with new material. In order to improve
the adhesive onto porous and dry surfaces, it is recommended to previously spread
a first layer consisting in a 30% water-diluted . has to be mixed before use with
mechanic drills. Application can be made with brushes, rollers or spraying devices.
• CONSUMPTION.
0.5 kg/square metre/year.
CHARACTERISTICS
ENVIRONMENTAL
SOLVENT BASED
PROBLEM
REMOVING EPOXY
RESIN DIRT
WITHOUT
RUINING THE
TILED SURFACES
METHOD OF USE
PRECAUTIONS
APPLY BY BRUSH
WEAR PERSONAL
PROTECTIVE EQUIPMENT
SOLUTION
APPLICATION FIELDS
CLEANPOX is a specific product with a special
organic solvent base. Its special features are
that it does not develop toxic vapours that are
harmful to health and it maintains an efficient
scale removing action at the same time.
CLEANPOX is used to eliminate traces of
epoxy resin on ceramic floor and wall tiles.
ADVANTAGES
Unless the leftovers of epoxy-based products
used to lay ceramic tiles are removed straight
after grouting, they have to be cleaned
thoroughly using a product that does not ruin
the tiled surface.
• It does not develop vapours that are harmful
to health.
• It does not ruin the tiled surfaces.
• It cleans the tiles quickly and easily.
METHOD OF USE
Brush the liquid CLEANPOX product over the
surface and leave to work for approximately
5 minutes then, again using a brush, possibly with the aid of a spatula and scouring
sponge, eliminate any stubborn scale left on
the surface.
Dry the floor and rinse abundantly with water.
wall or floor tiles that are not resistant to
acids.
CONSUMPTION
Variable consumption: from 100 and 200 g/m2.
PRECAUTIONS
• Do not use on marble, limestone or glazed
5th DIVISION
TECHNICAL CHARACTERISTICS
CLEANPOX
Standard
liquid
transparent
1,1 kg/litre
1,1
15%
from 0°C to 40°C
12 months
SAFETY REGULATIONS
• During use, wear gloves and goggles to protect hands and eyes; also wear wellington boots.
• In case of contact with skin, immediately wash with soap and plenty of water
• In case of contact with eyes, immediately rinse with plenty of water and seek immediate medical
advice.
• In case of ingestion, immediately swallow a spoon of sodium bicarbonate and call a doctor.
PACKAGING
CLEANPOX
Packs of 12 ×1 litre bottles.
R.C. - 7/2012ing
• FOR ANY FURTHER INFORMATION OR ADVICE ON PARTICULAR APPLICATIONS, CONTACT OUR TECHNICAL OFFICE • IN ORDER TO CORRECTLY USE OUR PRODUCTS, REFER TO INDEX TECHNICAL SPECIFICATIONS •
Internet: www.indexspa.it
Informazioni Tecniche Commerciali
[email protected]
Amministrazione e Segreteria
[email protected]
Via G. Rossini, 22 - 37060 Castel D’Azzano (VR) - Italy - C.P.67
Index Export Dept.
Tel. (+39)045.8546201 - Fax (+39)045.518390
[email protected]
© INDEX
socio del GBC Italia
The figures shown are average indicative figures relevant to current production
and may be changed or updated by INDEX at any time without previous warning.
The advice and technical information provided, is what results from our best
knowledge regarding the properties and the use of the product. Considering
the numerous possible uses and the possible interference of conditions or
elements beyond our control, we assume no responsibility regarding the results
which are obtained. The purchasers, of their own accord and under their own
responsibility, must establish the suitability of the product for the envisaged use.
Appearance
Colour
Density
pH
Active content
Application temperature
Shelf life in original packaging

Download Report