3D PRINTING IN HEALTH

3D PRINTING IN HEALTH
From imaging to 3D reality
6 februari 2015—UMC Groningen
Chairman PMA van Ooijen, MSc, PhD, CPHIT
Scientific Researcher, dept. of Radiology, UMCG
Discipline Leader Medical Imaging Informatics, CMI-NEN
Program
9.30-10.00
Arrival and registration
10.00-10.15
Welcome and introduction
10.15-10.45
Theme: Challenges in software
To be determined
P. van Ooijen, PhD
UMCG
Ir. J. Malda, PhD
UMC Utrecht
10.45-11.30
Theme: Materials
10.45-11.00
What common materials can be printed?
T. Strating
Fablab/Symbioshape
11.00-11.15
New material development: challenges in developing printable
(bio)materials
T Flipsen, PhD
Polyvation
11.15-11.30
Bioengineering strategies for type one diabetes
A. van Apeldoorn
University of Twente /
11.30-12.00
Break and Posters
12.00-13.00
Pitches on 3D printing challenges and discussion
13.00-14.00
Lunch and Posters
14.00-14.45
Theme: Clinical applications
14.30-14.45
Personalized implants: from the pre-operative planning (scan, software …) until the surgery
M. Witjes, PhD
UMCG
14.45-15.00
Using a 3D-printed anatomical pancreas/kidney phantom to evaluate E. Visser, PhD
and optimize the quantitative performance of SPECT/CT and PET/CT
for beta cell imaging
Radboudumc
15.00-15.15
Challenges with Imaging and 3D printing in Orthopedic Surgery
P. Jutte, PhD
UMCG
14.45-15.15
Break and Posters
15.15-15.45
Regulatory challenges in Medical 3D printing
H. Declerck
Materialise
15.45-16.15
From Imaging to 3D reality using Advanced Visualization Tools
G. Kuhn
Terarecon
16.15-16.30
Closing Remarks
P. van Ooijen, PhD
UMCG
Registration
Participation is free of charge. For registration, please visit the website:
www.cmi-nen.nl
3D PRINTING IN HEALTH
From imaging to 3D reality
6 februari 2015—UMC Groningen
Genodigden
www.cmi-nen.nl/business
3D PRINTING IN HEALTH
From imaging to 3D reality
6 februari 2015—UMC Groningen
Location—VERANDEREN NAAR UMCG!
Universiteit Twente, Drienerlolaan 5 ,7522 NB Enschede
Faculty club (Gebouwnummer 42)
3D PRINTING IN HEALTH
From imaging to 3D reality
6 februari 2015—UMC Groningen
Pitch your 3D Printing Challenge !
Do you have a challenge and do you think 3D printing could help your project to advance? Or do you use 3D printing techniques but are limited by your current setup?
During the CMI meeting on 3D Printing in Health: from Imaging to 3D reality held at the UMCG, Groningen on February 6,
2015 there will be an opportunity to pitch your challenge with respect to 3D Printing in a 5 minute pitch followed by about 10
minutes of discussion in front of a panel consisting of representatives of different companies working in the area of 3D
printing.
The aim of the pitch is to gain interest for your challenge, get input from the audience and experts, and facilitate matchmaking
with partners that could help you tackle your challenge.
Only 4 pitches will be selected, so sign up as soon as possible by e-mailing a short abstract to <<<WIE???>>> (max. 250 words –
images to clarify your challenge are allowed). If more than 4 proposals are received before January 10, 2015 the organizing
committee will select the most challenging ones. You will be notified of this decision shortly after January 10.
www.cmi-nen.nl/business
3D PRINTING IN HEALTH
From imaging to 3D reality
6 februari 2015—UMC Groningen
Poster Session on Applications and Developments in Medical 3D Printing
Using imaging based 3D printing as a tool to support your medical research or clinical practice? Developing 3D printing materials or techniques for medical applications? Or perhaps writing software and tools to facilitate 3D printing? This is your chance
to present your work to a wider audience and to share experiences and challenges.
During the CMI meeting on 3D Printing in Health: from Imaging to 3D reality held at the UMCG, Groningen on February 6,
2015 there will be an opportunity to present your work in the area of 3D Printing Applications and Developments as a poster
which will be displayed at the break area during the meeting.
Please submit your poster proposal in the form of a short 250 word abstract before December 31, 2014. A maximum of 10 selected posters will be notified after January 15, 2015.
NOTE: This call for posters is open for students and PhDs only.
www.cmi-nen.nl/business

Download Report