Nedcam Erwin van Maaren Shaping Technology

Nedcam
Erwin van Maaren
Shaping Technology
9.00-9.45
[email protected]
http://www.nedcam.com/
Tel. 003155 3681080
Shaping Technology: Introduction and Overview
NEDCAM focuses on the development and management of (3D) projects for
example: the production of models, moulds, plugs or other objects in a
combination of hard foam and plastics. Products for the composite and yacht
industry and architecture. It also develops new techniques in the composite
production and application of new materials. NEDCAM is a company with a good
network of partners in the different areas of expertise.
NEDCAM converts virtual design into tangible reality, by mechanically making the
effective form from 2D/3D-CAD information.
NEDCAM is mainly active in:
Yacht construction:
models (scale 1-on-1), moulds, scale models, interior
Architecture:
moulds, roof/gable elements, art objects
Automotive industry:
models, moulds, scale models
Composites industry;
models, moulds, art objects
References:
Yacht construction: int.al. Volvo Ocean Race boats (various teams), European
Boat of the year 2006
Architecture: int.al. bridge in Dublin, scale 1:1 EPS-moulds for the roof of a
multicultural centre in Israel, in cooperation with Moshe Safdie and Holland
Composites, BUBBLE-project in cooperation with Frantzen Architects, biggest
synthetic blob-building (bus station Hoofddorp)
Automotive: int.al. cooperation with Donkervoort, World Solar Challenge: team
NL Nuna 1 (winner 2000), Nuna 2 (winner 2001) and Nuna 3 (winner 2004) and
team Belgium Umicore (2nd place in 2007) Prautotype 003
Other: prototype chair for Benthem Crouwel Architects

Download Report