Training catalog ABB Distribution Automation training 2015 Relay schools, application, product, and automation communications training The value of training Distribution Automation Training Center (DATC) Located in sunny Coral Springs, Florida, ABB’s DATC offers factory and on-site training for our Relion products and applications. Our goal is to help our customers achieve long product life, improve safety and reduce downtime. We work in partnership with you to address your specific needs and ensure that your personnel are more satisfied with their jobs thanks to deeper knowledge of equipment and service procedures. Our training features: − highly qualified professionals with a wealth of experience in relay and technical support − training material created to include theory and hands-on exercises − expertise in IEEE, IEC 61850, DNP 3.0 and Modbus communication standards Training offered The following types of training are offered: − Classroom training is offered at the DATC in Coral Springs, FL. − Onsite product training is available to customers at the customer‘s location. These classes are upon request only. − Customized workshops are designed to provide a deeper understaning of the principles of protection and control, each class is targeted to address a specific topic, including feeder, transformer, and generator protection. The classes are structured for 1 – 2.5 days and can be held on-site or at one of ABB’s facilities in your area. Contact your FES representative to schedule. 2 ABB Distribution Protection and Control Training 2015 | Training catalog Training catalog | ABB Distribution Protection and Control Training 2015 3 Table of contents Relay & automation schools Symmetrical components and fault analysis Fundamentals of protection relaying of substation I & II Power systems protection & coordination I & II Page 5 Page 6 Page 7 Relay product training Electromechanical relay and Flexitest switches Relion® RER620 recloser control IED Relion ® 615 series and tools training Relion ® 615R series and tools training Relion ® 620 series and tools training IEC61850 for protection and control Arc Protection System REA 101 Relion ® 630 series and tools training COM600 communication gateway configuration OVR recloser and PCD control application GridShield recloser and RER620 applications Course schedule Registration information Webinars 4 ABB Distribution Protection and Control Training 2015 | Training catalog Page Page Page Page Page Page Page Page Page Page Page Page Page Page 8 9 10 11 12 13 14 15 16 18 19 20 22 23 Symmetrical components and fault analysis Objective The course discusses the symmetrical component representation of various power system components, and comprehensively analyzes faults. Relay segments covered: − Per unit system − Introduction to symmetrical components − System faults − Fault calculations − Sequence network modeling: Generator − Sequence network modeling: Transformer − Sequence network modeling: Overhead lines Participants learn − Mathematical fault analysis techniques − Fault calculations and system stability for single-phase and multiple-phase fault scenarios − Understand real case examples − Rapid calculation of how your system will behave under abnormal conditions Participant profile Engineers and senior level technicians who wish to reacquaint themselves with vector mathematics and fault analysis computations Prerequisites A general knowledge of basic electrical engineering is recommended, as well as Elementary Phaser Mathematics, Mathematical Matrix Manipulation, and Power System Basics What to bring Only scientific calculator Additional course details Course is offered once in the spring and fall. Class time is 8:30 - 5:00 pm each day. Training catalog | ABB Distribution Protection and Control Training 2015 5 Fundametals of protection relaying of substation I & II Objectives The major contents of fundamental course are the protection schemes in distribution substations and application courses are the schemes in distribution substations. This course is divided on (2) courses Introduction to Fundamentals I and II. Introduction to Fundamentals I (2.5 days) − Power systems fundamentals − Elements of feeder protection − Busbar protection − Transformer protection − Examples/calcultions, and hands-on Introduction to Fundamentals II (2.5 days) − Review of fundamentals I − Line protection − Capacitor bank protection − Generator protection − Substation automation − Hands-on/calcuation/examples Participants learn − The basic concepts of protective relaying to the advanced topics of generation protection − Understand key design consideration and operations − Criteria used to select protective relay settings Participant profile Designers, engineers and technicians involved with design and development of distirbution lines, substation, as well as anyone involved in protective relay selection and application. Prerequisites Participants interested in Fundamentals II must complete Fundamentals I first to register. Additional course details Course is offered once in the spring and fall. Class time is 8:30 - 5:00 pm each day excpet for the first day which is 8:00 am - noon. 6 ABB Distribution Protection and Control Training 2015 | Training catalog Power systems protection & coordination I & II Objectives The major contents of this course covers the fundamental aspects of power system protection and coordination. The basic philosophy and introduction to application problems are also addressed. This course is divided on (2) courses Power Systems I and II. Power systems I (2.5 days) − Power system fundamentals − Fault calucation − Protection systems introduction − Selection of protection relays − Transformer, busbar and arc protection Power systems II (2.5 days) − Review of power systems I − Motor protection − Overheard line protection − Generator protection − Feeder protection − Relay coordination Participants learn − Students will learn the basis upon which the selection of protection systems is made for the different components of the power system (lines, transformers, motors, generators, and busbars) as well as the basic criteria for relay settings and coordination. − Review of fault calculations and protective device calculations − Coordination of overcurrent protective devices Participant profile Electrical engineers, relay engineers, and senior technicians. Involved in protection and coordination for distribution lines, transmission lines and substations. Prerequisites − Knowledge of basic electrical engineering is required. Basic relay school is highly recommended. − Students interested in Power Systems II need to complete Power Sysytems I first. Additional course details Course is offered once in the spring and fall. Class time is 8:30 - 5:00 pm each day excpet for the first day which is 8:00 am - noon. Training catalog | ABB Distribution Protection and Control Training 2015 7 Electromechanical relays & Flexitest switches Objectives This two day training program is designed for participants to become proficient in application, installation, operation, maintenance, and testing of ABB electromechanical relays and FT switches. Our mission is to train a new and changing power utility workforce to become experienced in these products using personalized, hands-on training. Training segments include − Current non-directional and current directional − Distance − Current differential − Auxiliary and annunciator − Under/over voltage − Power directional − Under/over frequency − FT Switches Participants Learn and Perform HandsOn − Applications: learn to apply relays for various combinations of fault protection − Settings: set up relay functions for your specific application − Maintenance: maintain relays to perform for a lifetime − Calibration: calibrate relays to precision accuracy − Acceptance Testing: test relays to verify acceptance criteria and characteristics − Relay construction: learn cylinder unit, induction disc element, transformer, compensator, polar unit and auxiliary relay components − Troubleshooting techniques: use relay tools to reduce operating costs and minimize downtime Participant profile Relay Engineers, Technicians, and Operators Prerequisites Knowledge of/experience with Protective Relaying and use of electrical equipment What to bring Laptop is recommended Additional course details Course is offered once in the spring and fall. Class time is 8:30 - 5:00 pm each day. 8 ABB Distribution Protection and Control Training 2015 | Training catalog Relion® RER620 recloser control IED Objectives This free, two-day Relion course has been designed for engineers and technicians to become proficient in installation, operation and configuration of the RER620 IED controller for Recloser Gridshield. Topics covered − Using the RER620 LHMI, WebHMI and COM600 − RER620 settings over WebHMI and Parameter Setting Tool − Using the Graphical Display Editor to customize RER620 HMI − Configuring the RER620 recloser application − Relay protection applications − Relay logic design with Application Configuration Tool − DNP3 point remapping using the Communication Management Tool − Understanding DNP3 objects, classes, variations, events and deadbands Participants learn and perform hands-on − RER620 settings using the WebHMIand PCM600 − RER620 Application Configuration Tool for customized logic − DNP3 serial and TCP communications Participant profile Service and Lineman technicians, System engineers, maintenance engineers and persons who want to learn to operate reclosers Additional course details Course is offered in the spring, summer and fall. Class time is 8:30 am - 5:00 pm each day. Prerequisites Basic knowledge of protection relays and the electrical network to be controlled. Training catalog | ABB Distribution Protection and Control Training 2015 9 Relion® 615 series and tools training Objectives This free, two-day Relion course has been designed for engineers and technicians to become proficient in installation, operation and configuration of 615 series IEDs, tools and software. for customized logic Course breakdown: − Technician Relion Course (REF-615 LIN), Operations Relion Course (REF615-OPE) and Engineering Relion Course (REF-615-ENG) Topics covered − Using the REF615 LHMI, WebHMI and COM600 − REF615 settings over WebHMI and Parameter Setting Tool − Presentation of PCM600 Tool − Configuring the REF615 Feeder application − Relay protection applications − Relay logic design with Application Configuration Tool (ACT) − DNP3 point remapping using the Communication Management Tool − Understanding DNP3 objects, classes, variations, events and deadbands − GOOSE Engineering Participant profile Service and Lineman technicians, System engineers, maintenance engineers. Prerequisites Knowledge of distribution operation and protection principles Additional course details Course is offered in the spring and fall. Class time is 8:30 am - 5:00 pm each day. Participants learn and perform hands-on − REF615 quick start up guide overview − REF615 settings using the WebHMI and PCM600 − REF615 application configuration tool 10 ABB Distribution Protection and Control Training 2015 | Training catalog Relion® 615R series and tools training Objectives This free, two-day Relion course has been designed to provide customers with a 19“ rack mount version of the REF615 feeder IED as well as an easy, cost effective upgrade of the DPU2000R. for customized logic Course breakdown: − Technician Relion Course (REF-615 LIN), Operations Relion Course (REF615-OPE) and Engineering Relion Course (REF-615-ENG) Topics covered − Using the REF615 LHMI, WebHMI and COM600 − REF615 settings over WebHMI and Parameter Setting Tool − Presentation of PCM600 Tool − Configuring the REF615 Feeder application − Relay protection applications − Relay logic design with Application Configuration Tool (ACT) − DNP3 point remapping using the Communication Management Tool − Understanding DNP3 objects, classes, variations, events and deadbands − GOOSE Engineering Participant profile Service and Lineman technicians, System engineers, maintenance engineers. Prerequisites Knowledge of distribution operation and protection principles Additional course details Course is offered in the spring and fall. Class time is 8:30 am - 5:00 pm each day. Participants learn and perform hands-on − REF615 quick start up guide overview − REF615 settings using the WebHMI and PCM600 − REF615 application configuration tool Training catalog | ABB Distribution Protection and Control Training 2015 11 Relion® 620 series and tools training Objectives This free, two-day Relion course has been designed for engineers and technicians to become proficient in installation, operation and configuration of 620 series IEDs. Topics covered − Introduction to 620 series IEDs (family features) − Local HMI, Web HMI interfaces − Control configuration − 620 series special features: multipage SLD, load profile recorder, programmable push buttons − GOOSE engineering Additional course details Course is offered in the spring and fall. Class time is 8:30 am - 5:00 pm each day. Participants learn and perform hands-on − Perform basic operations through available interfaces (LHMI, WHMI). − Manage the relay settings − Manage disturbances − Modify an application configuration (functions, signals, I/O) − Engineer the GOOSE communication Prerequisites Basic knowledge of protection relays and the electrical network to be controlled. Participant profile System engineers, maintenance engineers and persons who want to learn to operate and engineer 620 series of relays. 12 ABB Distribution Protection and Control Training 2015 | Training catalog IEC61850 for protection and control Objectives This two-and-a-half day course is designed to give attendees the tools necessary to understand, engineer, and deploy protection and control schemes based on IEC 61850. Topics covered − Overview of IEC61850 protocol suite − Information on IEC61850 7-3 − Hands-on configuration practive on ABB Relion relay − monitoring and decoding of IEC61850 Prerequisites Basic knowledge of protection relays and the electrical network. Participant profile Relay, protection, control, communication, and automation engineers. Additional course details Course is offered in the spring and fall. Class time is 8:30 am - 5:00 pm each day with the exception of the first day which begins at 1:00 pm. Training catalog | ABB Distribution Protection and Control Training 2015 13 Arc Protection System REA 101 Objectives This free, one-and-a-half day course is designed for participants to become proficient in application, installation, operation and tresting of ABB Arc Protection Relays. Our mission is to train a new and changning Power Utility workforce to become expereinced in REA101, 103, 105, and 107 using personalized, handson training. Participants learn and perform hands-on − Applications: learn to apply relays for various situations − Settings: set up relay functions for your specific application − Acceptance testing: test relays to verify acceptance criteria and characteristics − Troubleshooting Techniques: use relay tools to reduce operating costs and minimize downtime Additional course details Course is only offered in the spring. Class time is 8:30 am - 5:00 pm each day with the exception of the last day which ends at noon. Prerequisites Knowledge of experience with protective relaying and use of electrical equipment. Participant profile Relay Engineers, Technicians and Operatrs. 14 ABB Distribution Protection and Control Training 2015 | Training catalog Relion® 630 series and tools training Objectives This free, two-and-a-half day course has been developed to familiarize participants with the operations and functional programming of the 630 Series. It will also familiarize participants with programming and communication configuration of 630 series of IEDs by using REF630 feeder protection relay and PCM600. Participants learn and perform hands-on After this course the participant will be able to: − Know the configuration principles and programming process of 630 series − Modify pre-configurations − Create the relay configuration with PCM600 tool − Modify the graphical display − Manage the relay configurations − Create GOOSE communication Topics covered − Most common configuration tasks of 630 series − Hardware of Relion® 630 series − PCM600 tools for IED configuration − Configuration of the protection, control and measurement functions − Local HMI programming − Pre-configurations − GOOSE configuration Prerequisites Basic knowledge of protection relays and the electrical network to be controlled. Participant profile Substation operators, system engineers and persons who want to learn how to configurate the 630 series of relays Additional course details Course is only offered in the spring. Class time is 8:30 am - 5:00 pm each day with the exception of the first day which begins at 1:00 pm. Training catalog | ABB Distribution Protection and Control Training 2015 15 COM600 Grid Automation Controller Objectives This two-day course was designed for engineers and technicians to become proficient in installation, operation and configuration of the COM600 gateway/ HMI. Our mission is to train a new and changing power utility work force to become experienced in ABB’s substation automation COM600 series product using personalized, hands-on training. Training segments include: − Hardware identification and configuration − Operating the COM600, both locally and remotely − License upgrades − Configuration of master and slave communications − Configuration of the HMI − Implementation of the advanced features of the COM600 Participants learn and perform hands-on: − Where and how to apply COM600 in various applications − How to set up the COM600 − How to set up communication networks for your specific application − How to configure and apply HMI functions − How to configure and apply functions utilizing ABB connectivity packages and templates − Upload and download configurations to/from the COM600 − How to use event and alarm lists − How to use the Web HMI − How to use advanced features of the COM600 such as historical data storage and IEC61131-3 active logic programming (emphasis will be placed on the implementation of the Fault Detection Isolation and Restoration (FDIR) algorithm unique to the COM600) − Troubleshooting techniques Product highlights − COM600: Gateway and/or HMI − Communication protocols including IEC61850, DNP and Modbus − Simple configuration and commissioning − Bottom up engineering approach Additional course details Course is only offered in the spring, summer and fall. Class time is 8:30 am - 5:00 pm each day. 16 ABB Distribution Protection and Control Training 2015 | Training catalog Training catalog | ABB Distribution Protection and Control Training 2015 17 OVR recloser and PCD control application Objectives This two-day training course is designed for participants to become proficient in application, installation, operation, maintenance, testing and commissioning of PCD relays and OVR reclosers. Topics covered: − Receiving, handling, and storage − Installation − Recloser assemblies − Using AFSuite™ software − Communications, programming, and troubleshooting − Recloser operation and testing the − PCD control − Maintenance and adjustments Participants learn and perform hands-on: − Functionality of the settings − Fast and efficient techniques for application − How to minimize downtime − How to optimize availability of resources − How to maximize performance − How to quickly and effectively test the control − To decrease commissioning time withadvanced features − Proper setup for event capture andfault record recordingand templates Participant profile Relay engineers, protection engineers, technicians, and operators Prerequisites Knowledge of distribution operation and protection principles 18 ABB Distribution Protection and Control Training 2015 | Training catalog GridShield recloser and RER620 applications Objectives This three-day hands-on training course is designed for participants to become proficient in the application, installation, operation, maintenance, testing and commissioning of RER620 relays and GridShield reclosers. Topics covered − Introduction of the GridShield recloser; high and low voltage cabinets − Using the RER620 LHMI, WebHMI and COM600 − RER620 settings over WebHMI and Parameter Setting Tool − Using the Graphical Display Editor to customize RER620 HMI − Configuring the RER620 recloser application − Relay protection applications − Relay logic design with Application Configuration Tool − DNP3 point remapping using the Communication Management Tool − Understanding DNP3 objects, classes, variations, events and deadbands Participant profile Relay engineers, protection engineers, Technicians, operators, dispatchers, SCADA and communication engineers Prerequisites Knowledge of distribution operation and protection principles Participants learn and perform hands-on − RER620 settings using the WebHMI and PCM600 − RER620 Application Configuration Tool for customized logic − DNP3 serial and TCP communications Training catalog | ABB Distribution Protection and Control Training 2015 19 2015 course schedule Spring & Fall 2015 Course # Course name Price Location Date (USD) * Relay school training SCH001 Symmetrical Components and Fault $1,500 Coral Springs, FL Analysis SCH002A Fundamentals of Protection Relaying of June 8-10 Aug 17-19 $1,500 Coral Springs, FL April 15-17 $1,500 Coral Springs, FL Aug 12-14 $1,500 Coral Springs, FL April 13-15 $1,500 Coral Springs, FL Aug 10-12 $1,500 Coral Springs, FL April 23-24 Substation I SCH002B Fundamentals of Protection Relaying of Substation II SCH003A Power Systems Protection & Coordination I SCH003B Power Systems Protection & Coordination II RPT006 Electromechanical relays and FT switches Aug 20-21 Substation communication Mar 26-27 RPT009 COM600 Configuration $1,500 Coral Springs, FL June 25-26 Oct 22-23 Mar 23-25 SCH005 IEC 61850 for Protection & Control $1,500 Coral Springs, FL June 22-24 Oct 19-21 Relays Mar 12-13 615 -Gen Relion 615 series Free Coral Springs, FL June 18-19 Sept 23-24 Mar 19-20 615R - Gen Relion 615R series Free Coral Springs, FL June 4-5 620 - Gen Relion 620 series Free Coral Springs, FL Mar 17-18 Oct 15-16 Sept 15-16 Mar 10-11 RER620-Gen Relion RER620 series Free Coral Springs, FL 630-Gen Relion 630 Free Coral Springs, FL May 18-20 REA-Gen Arc protection relay general Free Coral Springs, FL May 21-22 June 16-17 Sept 17-18 20 ABB Distribution Protection and Control Training 2015 | Training catalog Course # Course name Price Location Date Lake Mary, FL May 12-14 (USD) * Recloser training Feb 10-12 GSR001 GridShield Recloser and RER620 $1,000 Applications Aug 18-20 Nov 3-5 OVR001 Recloser and Recloser Control (OVR, $1,000 Lake Mary, FL PCD, AFSuite) May 20-21 Oct 14-15 More courses will be added to the 2015 schedule. Check online for the most current information. *A multi-session 10% discount is granted on the total tuition fee of the same student registering to more than one class during the same calendar year. Please contact the hosting ABB facility for more information: Lake Mary, FL Phone: +1 800 929 7947 ext. 5 +1 407 732 2000 ext. 2510 Email: customer.service.group@ us.abb.com Coral Springs, FL Toll Free: +1 800 222 1946 Email: [email protected] Disclaimers − Relay school classes – Need a minimum of 6 participants to confirm this class – Confirmation of this course will be completed once requirement is met − Relion product training classes – Minimum of 6 participants to confirm class – Confirmation of this course will be completed once requirement is met. Special offer $0.00 per course is limited and does not include any other additional discounts. − General: ABB has the right to cancel the class if above requirements are not met. We are not responsible for travel expenses of any of the participants if class is cancelled − We will confirm all classes at least 2 weeks prior of the date of the course. Training catalog | ABB Distribution Protection and Control Training 2015 21 Registration information Please register for courses by visiting us online. Please make reservations at least four weeks before the start of the course, as we are only able to accept a limited number of participants on each course. We accept bookings in the order they arrive. To find course dates, please refer to the course descriptions or course schedule. You can email us at allschools@ us.abb.com. Course certificate Each participant will receive a course certificate upon the completion of the course. Confirmation, facilities and accommodations A confirmation will be returned upon receipt of your application with specific details about the hours, and location. We’ve negotiated the best rates available in each area during the ABB training program, please contact us for hotel information. On-site and customized customer training On-site and customized customer training sessions are offered upon request. We will gladly arrange courses at any agreed location. Our training staff will be happy to assist in the planning and organization of your on-site or customized training requirements. Arrangements may also be made by contacting the Customer Support Department. Cancellation and notice If the course is cancelled or postponed, you will be informed at least one week prior to the course start. We reserve the right to postpone or cancel courses. If you need to cancel, please send an email to [email protected] as soon as possible, but no later than two weeks prior to course start. The course fee will not be reimbursed to anyone canceling with less than two weeks notice from the scheduled course date. Instructors and staff Training is conducted by our professional instructors who are specialized in delivering the latest information and knowledge about the subject at hand. Course descriptions Course descriptions concern standard courses only. For tailor-made courses please call +1 954-825-0633. ABB reserves the right to make changes to standard courses without notice. 22 ABB Distribution Protection and Control Training 2015 | Training catalog Webinars Visit us online to view the 2015 ABB Protective Relay School webinar calendar or to access recorded webinar archives from previous webinar events. Training catalog | ABB Distribution Protection and Control Training 2015 23 ABB Inc. Distribution Automation 4300 Coral Ridge Drive Coral Springs, FL 33065 Phone: +1 954-752-6700 Toll Free: +1 800 523-2620 24/7 support: + 1 800-2221946 Email: allschools@ us.abb.com ABB Inc. Outdoor Products 655 Century Point Lake Mary, Florida 32746 Phone: +1 407-732-2000 ext. 2510 +1 800 929 7947 ext. 5 Email: customer.service. [email protected]. com www.abb.com/ substationautomation www.abb.com/relion www.abb.com/ mediumvoltage www.abb.us/mvservice All sales are subject to ABB Inc. General Terms and Conditions of Sale. While every effort has been made to assure accuracy, the information in this document is subject to change without notice. © Copyright 2008, 2014 ABB Inc. All rights reserved. 1VAD3801-TA Rev R January 2015 Contact us
© Copyright 2024 ExpyDoc
