QS/1 Printer Not Working STEP 3 QS/1 Printer does not print labels If settings are blank, follow the steps shown below: Select QS/1 Net Printer and select printer from drop-down list; Auto checked; then click on Destination Workstations that are physically attached to label printers MUST be logged into QS/1, they are referred to as a DAL machine (LD-xxxxx) Check QS/1 settings on DAL machine STEP 1 EXIT QS/1 – ensure all instances of application are not visible on taskbar STEP 2 Check LAN Adapter Number 1150 is selected; then click on Configure Net Printers * If unsure of printer number, please contact PharmIS via email [email protected] or pager 17986 Go to next step to configure printer options. STEP 4 Laser Printer? checked; Select Default Page Font as Standard 17 Pitch (17 cpi) as shown below STEP 5 Select QS1LPT1 as default printer from drop-down list, then click OK STEP 6 Return back to display window (as shown in step 4); Click OK; Click YES at message prompt. Please click Start and connect to QS/1 and select printer for labels. If default printer is NOT QS1LPT1 (as shown above), click Change Printer… and follow next step STEP 7 STEP 8 Login to QS/1; Click on Printer Configuration; Select Printer Selection to appropriate printer Print a test report. ERROR If screen displays error (as shown) prior to these steps and printer setup, which does NOT resolve please contact PharmIS.
© Copyright 2024 ExpyDoc
