Habasit Tool Data Sheet PQ-59 02-12-14 12:21 Tool Data Sheet PQ-59 Picture Product Designation Product Group: Hot pressing devices Joining System: Quickmelt Description The PQ-59 is a hot pressing device for joining of Habasit machine- and spindle tapes up to a width of 50 mm and a thickness of 3.6 mm with the Quickmelt or Flexproof method. With an additional cooling tong and a guide rail in the width required for your application you have a joining system that enables you to exchange a tape in minutes.New features of PQ-59 are a status indication (LED display) and an overheating protection which provides an improved tool reliability. Thanks to this new control unit it is now possible to enter the temperature in a range between 120°C to 190°C. Technical Data Belt/tape width max. : 50 mm 2 in. Belt/Tape thickness max.: 3,6 mm 0,14 in. Electric power supply: http://www.habasit.com/HNET/proden.nsf/luTool/ATRU 1x120, 1x230V V 450 W Pagina 1 van 2 Habasit Tool Data Sheet PQ-59 Dimensions (LxWxH): Cooling media: 02-12-14 12:21 280 x 70 x 95 mm 11 x 2,8 x 3,8 in. Cooling tongs Working temperature: Temperature range: Weight net: 190 °C °F Min 120 °C Max 190 °C Min °F Max °F 0,83 kg lbs. Operating Instructions Product Liability, Applications Considerations If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer. All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice. BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT'S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES. Last modification on 15-09-2011 http://www.habasit.com/HNET/proden.nsf/luTool/ATRU Pagina 2 van 2