W.S. TYLER® - Clarkson Laboratory and Supply

W.S. TYLER
®
INDUSTRIAL GROUP
product and price catalog
january 2014
HAVER & BOECKER GROUP
TABLE OF CONTENTS
Information/Guide USA Test Sieving Specification...................................3
Test Sieves-supplied with serial # and matching test sieve Certificate of Compliance.
8” Diameter........................................................................................... 4
12” Diameter......................................................................................... 5
3” Diameter........................................................................................... 6
Gold Series........................................................................................... 6
200mm Diameter.................................................................................. 7
6” Diameter........................................................................................... 8
10” Diameter......................................................................................... 8
18” Diameter......................................................................................... 9
Special Test Sieve Products (Wet Wash)............................................. 9
Test Sieve Cleaning Brushes................................................................9
NEW! Alpine Smart Test Sieves .................................................................. 10
Air Jet Test Sieves ............................................................................ 10
W.S. Tyler Sieving Software & Ultrasonic Screening System..................... 11
NEW! Alpine e200LS................................................................................................11
Laboratory Services...................................................................................... 12 & 13
RO-TAP® RX-29 & RO-TAP® RX-30 Test Sieve Shakers.......................... 14
RO-TAP® RX-29-E &RO-TAP® RX-30-E Test Siever Shakers.................... 15
RO-TAP® Maintenance Kits......................................................................... 15
RO-TAP® RX-94 Test Sieve Shaker............................................................. 16
RX-812 Coarse Sieve Shaker........................................................................ 16
Sound Enclosure Cabinets & Test Stand........................................................ 17
NEW! Rotary Sifter RX-20........................................................................................ 17
Sieving Accessories....................................................................................... 18
Sampling Devices/RO-TAP® Conversion Kits.............................................. 19
RO-TAP® RX-29 & RX-30 Parts Diagram..................................................... 20
RO-TAP® RX-29 & RX-30 Parts List............................................................. 21
RO-TAP® RX-94 Parts Diagram................................................................... 22
RO-TAP® RX-94 Parts List............................................................................ 23
RX-812 Coarse Sieve Shaker Parts Diagram................................................ 24
RX-812 Coarse Sieve Shaker Parts List........................................................ 25
Computerized Particle Analysis Technology (CPA)........................................ 26
Traceable Document of Certification (Sample)...............................................IBC
CATALOG NOTES:
1. Prices shown are suggested list prices.
2. Prices are subject to change without prior notice.
3. Freight Terms: F.O.B. Mentor, Ohio.
W.S. Tyler® and RO-TAP® are registered trademarks of Haver Tyler, Inc.
© Copyright 2013, Haver Tyler, Inc. All rights Reserved
2
INFORMATION/GUIDE FOR TEST SIEVING
For information regarding specific specifications, please refer to Standards ASTM E11-09 & ISO 565, 3310-1.
Standard (A)
(1)
125mm
106 mm
100 mm (D)
90 mm
75 mm
63 mm
53 mm
50 mm (D) 45 mm
37.5 mm
31.5 mm
26.5 mm
25.0 mm (D)
22.4 mm
19.0 mm
16.0 mm
13.2 mm
12.5 mm (D)
11.2 mm
9.5 mm
8.0 mm
6.7 mm
6.3 mm (D)
5.6 mm
4.75 mm
4.00 mm
3.35 mm
2.80 mm
2.36 mm
2.00 mm
1.7 mm
1.4 mm
1.18 mm
1.00 mm
850 µmF
710 µm
600 µm
500 µm
425 µm
355 µm
300 µm
250 µm
212 µm
180 µm
150 µm
125 µm
106 µm
90 µm
75 µm
63 µm
53 µm
45 µm
38 µm
32 µm
25 µm (D)
20 µm (D)
Sieve Designation Nominal Sieve
Alternative
Opening, in. (B)9
(2)
(3)
5 in.
5
4.24 in.
4.24
4 in. (D)
4
3-1/2 in.
3.5
3 in.
3
2-1/2 in.
2.5
2.12 in.
2.12
2 in. (D)
2
1-3/4 in.
1.75
1-1/2 in.
1.5
1-1/4 in.
1.25
1.06 in.
1.06
1.00 in. (D)
1
7/8 in.
0.875
3/4 in.
0.750
5/8 in.
0.625
0.530 in.
0.530
1/2 in. (D)
0.500
7/16 in.
0.438
3/8 in.
0.375
5/16 in.
0.312
0.265 in.
0.265
1/4 in. (D)
0.250
No. 3-1/2 (E)
0.223
No. 4
0.187
No. 5
0.157
No. 6
0.132
No. 7
0.110
No. 8
0.0937
No. 10
0.0787
No. 12
0.0661
No. 14
0.0555
No. 16
0.0469
No. 18
0.0394
No. 20
0.0331
No. 25
0.0278
No. 30 0.0234
No. 35
0.0197
No. 40
0.0165
No. 45
0.0139
No. 50
0.0117
No. 60
0.0098
No. 70
0.0083
No. 80
0.0070
No. 100
0.0059
No. 120
0.0049
No. 140
0.0041
No. 170
0.0035
No. 200
0.0029
No. 230
0.0025
No. 270
0.0021
No. 325
0.0017
No. 400
0.0015
No. 450
0.0012
No. 500
0.0010
No. 635
0.0008
Permissible
Variation in Openings
(4)
±3.70 mm
±3.20 mm
±3.00 mm
±2.70 mm
± 2.20 mm
± 1.90 mm
± 1.60 mm
± 1.50 mm
± 1.40 mm
± 1.10 mm
± 1.00 mm
± .800 mm
± .800 mm
± .700 mm
± .600 mm
± .500 mm
± .410 mm
± .390 mm
± .350 mm
± .300 mm
± .250 mm
± .210 mm
± .200 mm
± .180 mm
± .150 mm
± .130 mm
± .110 mm
± .095 mm
± .080 mm
± .070 mm
± .060 mm
± .050 mm
± .045 mm
± .040 mm
± 35 µm
± 30 µm
± 25 µm
± 20 µm
± 19 µm
± 16 µm
± 14 µm
± 12 µm
± 10 µm
± 9 µm
± 8 µm
± 7 µm
± 6 µm
± 5 µm
± 5 µm
± 4 µm
± 4 µm
± 3 µm
± 3 µm
± 3 µm
± 3 µm
± 3 µm
Opening Dimension not more than 5% of the Openings (5)
130.00 mm
110.2 mm
104.0 mm
93.6 mm
78. 1 mm
65.6 mm
55.2 mm
52.1 mm
46.9 mm
39.1 mm
32.9 mm
27.7 mm
26.1 mm
23.4 mm
19.9 mm
16.7 mm
13.83 mm
13.10 mm
11.75 mm
9.97 mm
8.41 mm
7.05 mm
6.64 mm
5.90 mm
5.02 mm
4.23 mm
3.55 mm
2.975 mm
2.515 mm
2.135 mm
1.820 mm
1.505 mm
1.270 mm
1.080 mm
925 µm
775 µm
660 µm
550 µm
471 µm
396 µm
337 µm
283 µm
242 µm
207 µm
174 µm
147 µm
126 µm
108 µm
91 µm
77 µm
66 µm
57 µm
48 µm
42 µm
34 µm
29 µm
Maximum
Individual
Opening
(6)
130.9 mm
111.1 mm
104.8 mm
94.4 mm
78.7 mm
66.2 mm
55.7 mm
52.6 mm
47.4 mm
39.5 mm
33.2 mm
28.0 mm
26.4 mm
23.7 mm
20.1 mm
17.0 mm
14.05 mm
13.31 mm
11.94 mm
10.16 mm
8.58 mm
7.20 mm
6.78 mm
6.04 mm
5.14 mm
4.35 mm
3.66 mm
3.070 mm
2.600 mm
2.215 mm
1.890 mm
1.565 mm
1.330 mm
1.135 mm
970 µm
815 µm
695 µm
585 µm
502 µm
426 µm
363 µm
306 µm
263 µm
227 µm
192 µm
163 µm
141 µm
122 µm
103 µm
89 µm
76 µm
66 µm
57 µm
50 µm
41 µm
35 µm
Nominal Wire
Diameter, mm (C)
(7)
8.00
6.30
6.30
6.30
6.30
5.60
5.00
5.00
4.50
4.50
4.00
3.55
3.55
3.55
3.15
3.15
2.80
2.50
2.50
2.24
2.00
1.80
1.80
1.60
1.60
1.40
1.25
1.12
1.00
0.900
0.800
0.710
0.630
0.560
0.500
0.450
0.400
0.315
.0280
0.224
0.200
0.160
0.140
0.125
0.100
0.090
0.071
0.063
0.050
0.045
0.036
0.032
0.030
0.028
0.025
0.020
A - These Standard designations correspond to the values for test sieve openings recommended by the International Standards Organization, Geneva, Switzerland,
except where noted.
B - Only approximately equivalent to the metric values in Column 1.
C - The average diameter of the wires in the x and y direction, measured separately, of any wire cloth shall not deviate from the nominal values by more than +/- 15%.
D - These sieves are not in the standard series but they have been included because they are in common usage.
E - These numbers (3-1/2 to 635) are the approx. number of openings per linear in. but it is preferred that the sieve be identified by the standard designation in
millimeters or micronmeters.
F - 1000 µm - 1 mm
3
8" DIAMETER TEST SIEVES
DESIGNATION
U.S.A.
METRIC
4"
3-1/2"
3"
2-1/2"
2.12"
2"
1-3/4"
1-1/2"
1-1/4"
1.06"
1"
7/8"
3/4"
5/8"
.530"
1/2"
7/16"
3/8"
5/16"
.265"
1/4"
No. 3-1/2
No. 4
No. 5
No. 6
*1/8"
No. 7
No. 8
No. 10
No. 12
No. 14
No. 16
No. 18
No. 20
No. 25
No. 30
No. 35
No. 40
No. 45
No. 50
No. 60
No. 70
No. 80
No. 100
No. 120
No. 140
No. 170
No. 200
No. 230
No. 270
No. 325
No. 400
No. 450
No. 500
No. 635
100 mm
90 mm
75 mm
63 mm
53 mm
50 mm
45 mm
37.5 mm
31.5 mm
26.5 mm
25.0 mm
22.4 mm
19.0 mm
16.0 mm
13.2 mm
12.5 mm
11.2 mm
9.5 mm
8.0 mm
6.7 mm
6.3 mm
5.6 mm
4.75 mm
4.00 mm
3.35 mm
3.15 mm
2.80 mm
2.36 mm
2.00 mm
1.7 mm
1.4 mm
1.18 mm
1.0 mm
850 micron
710 micron
600 micron
500 micron
425 micron
355 micron
300 micron
250 micron
212 micron
180 micron
150 micron
125 micron
106 micron
90 micron
75 micron
63 micron
53 micron
45 micron
38 micron
32 micron
25 micron
20 micron
STAINLESS FRAME —
STAINLESS CLOTH
FULL HT.
PART #
5167
5168
5169
5170
5171
5172
5173
5174
5175
5176
5177
5178
5179
5180
5181
5182
5183
5184
5185
5186
5187
5188
5189
5190
5191
2058
5192
5193
5194
5195
5196
5197
5198
5199
5200
5201
5202
5203
5204
5205
5206
5207
5208
5209
5210
5211
5212
5213
5214
5215
5216
5217
5256
5218
5257
HALF HT.
PART #
PRICE
($)
BRASS FRAME —
STAINLESS CLOTH
FULL HT.
PART #
HALF HT.
PART #
4835
4836
4837
4838
4839
4840
4841
4842
4843
4844
4845
4846
4847
4848
4849
4850
4851
4852
4853
4854
4855
4856
4857
4858
4859
3281
4860
4861
4862
4863
4864
4865
4866
4867
4868
4869
4870
4871
4872
4873
4874
4875
4876
4877
4878
4879
4880
4881
4882
4883
4884
4885
4887
4886
2295
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
5021
5022
5023
5024
5025
2059
5026
5027
5028
5029
5030
5031
5032
5033
5034
5035
5036
5037
5038
5039
5040
5041
5042
5043
5044
5045
5046
5047
5048
5049
5050
5051
2113
5052
2296
—
64.70
—
64.70 —
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
—
64.70
5353
64.70
5354
64.70
5355
64.70
5356
64.70
5357
64.70
3279
64.70
5358
64.70
5359
64.70
5360
64.70
5361
64.70
5362
64.70
5363
64.70
5364
64.70
5365
64.70
5366
64.70
5367
64.70
5368
64.70
5369
64.70
5370
64.70
5371
64.70
5372
64.70
5373
64.70
5374
64.70
5375
66.60
5376
68.10
5377
74.40
5378
81.40
5379
87.80
5380
99.90
5381
115.40
5382
132.00
5383
166.10
5389190.60
5384
212.70
5391
475.80
• Overall Height – Full: 2-5/8"; Half: 1-5/8".
PRICE
($)
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
52.50
55.30
55.30
55.30
4529
4695
52.80
55.30
4530
4696
52.80
55.30
4531
4697
52.80
55.30
4532
4698
52.80
55.30
4533
4699
52.80
55.30
4534
4700
52.80
55.30
4535
4701
52.80
55.30
4536
4702
52.80
55.30
4537
4703
52.80
55.30
4538
4704
52.80
55.30
4539
4705
52.80
55.30
4540
4706
52.80
55.30
4541
4707
52.80
55.30
4542
4708
52.80
55.30
4543
4709
52.80
55.30
4544
4710
52.80
55.30
4545
4711
52.80
55.70
4546
4712
53.70
60.90
4547
4713
64.00
66.60
4548
4714
66.70
74.30
4549
4715
70.80
84.50
4550
4716
80.50
101.70
4551
4717
96.90
125.50
4552
4718
119.70
145.20
168.60
196.70
475.80
ITEM
PART #
Stainless
Stainless w. Ring
Brass
Brass w. Ring
• See Pages 12 and 13 for value added NIST
Traceable Certification Services.
4
FULL HT. HALF HT.
PART #
PART #
TOP COVERS
• Depth to Cloth – Full: 2"; Half: 1".
Note: 35 mesh backing cloth is available on test sieves
100 mesh and finer. ($25.00 additional)
PRICE
($)
BRASS FRAME —
BRASS CLOTH
BOTTOM PANS
ITEM
*1/8" opening is not included in ASTM E 11 Standard.
Stainless – Full Ht.
Stainless – Half Ht.
Stainless w. Skirt – Full Ht.
Stainless w. Skirt – Half Ht.
www.wstyler.com
Brass – Full Ht.
Brass – Half Ht.
Brass w. Skirt – Full Ht.
Brass w. Skirt – Half Ht.
8496
8497
8487
8488
PART #
PRICE ($)
24.30
26.20
14.00
15.30
PRICE ($)
8491
8492
8493
8494
45.60
45.60
55.20
55.20
8481
8482
8483
8484 23.10
23.10
31.20
31.20
12" DIAMETER TEST SIEVES
DESIGNATION
U.S.A.
4"
3-1/2"
3"
2-1/2"
2.12"
2"
1-3/4"
1-1/2"
1-1/4"
1.06"
1"
7/8"
3/4"
5/8"
.530"
1/2"
7/16"
3/8"
5/16"
.265"
1/4"
No.3-1/2
No. 4
No. 5
No. 6
*1/8"
No. 7
No. 8
No. 10
No. 12
No. 14
No. 16
No. 18
No. 20
No. 25
No. 30
No. 35
No. 40
No. 45
No. 50
No. 60
No. 70
No. 80
No. 100
No. 120
No. 140
No. 170
No. 200
No. 230
No. 270
No. 325
No. 400
No. 450
No. 500
M
ETRIC
100 mm
90 mm
75 mm
63 mm
53 mm
50 mm
45 mm
37.5 mm
31.5 mm
26.5 mm
25.0 mm
22.4 mm
19.0 mm
16.0 mm
13.2 mm
12.5 mm
11.2 mm
9.5 mm
8.0 mm
6.7 mm
6.3 mm
5.6 mm
4.75 mm
4.00 mm
3.35 mm
3.15 mm
2.80 mm
2.36 mm
2.00 mm
1.7 mm
1.4 mm
1.18 mm
1.0 mm
850 micron
710 micron
600 micron
500 micron
425 micron
355 micron
300 micron
250 micron
212 micron
180 micron
150 micron
125 micron
106 micron
90 micron
75 micron
63 micron
53 micron
45 micron
38 micron
32 micron
25 micron
STAINLESS FRAME —
STAINLESS CLOTH
FULL HT.
PART #
6635
6636
6637
6638
6639
6640
6641
6642
6643
6644
6645
6646
6647
6648
6649
6650
6651
6652
6653
6654
6655
6656
6657
6658
6659
2
761
6660
6661
6662
6663
6664
6665
6666
6667
6668
6669
6670
6671
6672
6673
6674
6675
6676
6677
6678
6679
6680
6681
6682
6683
6684
6685
6762
6686
INTER. HT. HALF HT.
PART #
PART #
2300
9109
2155
9281
2301
9282
6705
9193
9194
2302
9195
6704
9196
9411
9431
9197
6702
9198
6703
2303
9199
2218
9280
9098
9113
—
9099
9100
9214
9136
9271
9148
9079
9080
9081
9082
9083
9084
9085
9086
9087
9149
9215
9088
9089
9010
9090
9091
9092
9093
9094
9013
2304
9212
6801
6802
6803
6804
6805
6806
6807
6808
6809
6810
6811
6812
6813
6814
6815
6816
6817
6818
6819
6820
6821
6822
6823
6824
6825
2486
6826
6827
6828
6829
6830
6831
6832
6833
6834
6835
6836
6837
6838
6839
6840
6841
6842
6843
6844
6845
6846
6847
6848
6849
6850
6851
6856
6852
PRICE
($) 130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
130.70
139.70
147.30
153.70
165.40
208.10
235.20
274.70
300.40
3
52.20
BRASS FRAME —
STAINLESS CLOTH
FULL HT. INTER. HT.
PART #
PART #
6967
6968
6969
6970
6971
6972
6973
6974
6975
6976
6977
6978
6979
6982
6981
6982
6983
6984
6985
6986
6987
6988
6989
6990
6691
2573
6992
6993
6994
6995
6996
6997
6998
6999
7000
7001
7002
7003
7004
7005
7006
7007
7008
7009
7010
7011
7012
7013
7014
7015
7016
7017
2299
7018
HALF HT.
PART #
7200
2297
7201
2298
7202
7135
7203
7136
7204 7137
72057
7138
7206
7139
7207
7140
7208
7141
7209
7142
7210
7143
7211
7144
7212
7145
7213
7146
7214
7147
7215
7148
7216
7149
7217
7150
7218
7151
7219
7152
7220
7153
7221
7154
7222
7155
7223
7156
7224
7157
2486
3293
7225
7158
7226
7159
7227
7160
7228
7161
7229
7162
7230
7163
7231
7164
7232
7165
7233
7166
7234
7167
7235
7168
7236
7169
7237
7170
7238
7171
7239
7172
7240
7173
7241
7174
7242
7175
7243
7176
7244
7177
7245
7178
7246
7179
7247
7180
7248
7181
7249
7182
7250
7183
7251
2153 7252
7184
• Depth to Cloth – Full: 3-1/4"; Intermediate: 2"; Half: 1-5/8".
FULL HT.
PART #
PART #
Brass Brass w. Ring
Traceable Certification Services.
100 mesh and finer. ($25.00 additional)
See pages 14 - 16 for Ro-Tap Shakers and accessories.
44.90
44.90
8530
8531
BOTTOM PANS
PRICE
($)
PRICE ($)
Stainless 8536
Stainless w. Ring 8537
• See Pages 12 and 13 for value added NIST
Note: 35 mesh backing cloth is available on test sieves
HALF HT.
PART #
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
89.50
6329
6495
91.30
89.50
6330
6496
91.30
89.50
6331
6497
91.30
89.50
6332
6498
91.30
89.50
6
6499
91.30
333
89.50
6334
6500
91.30
89.50
6335
6501
91.30
89.50
6336
6502
91.30
89.50
6337
6503
91.30
89.50
6338
6504
91.30
89.50
6339
6505
91.30
89.50
6340
6206
91.30
89.50
6341
6507
91.30
89.50
6342
6508
91.30
89.50
6343
6509
91.30
89.50
6344
6510
91.30
89.50
6345
6511
91.30
96.30
6346
6512
91.30
105.30
6347
6513
99.80
114.70
6348
6514
109.40
125.60
6349
6515
119.70
146.70
6350
6516
139.70
179.90
6351
6517
170.60
188.10
6352
6518
187.60
221.40
253.20
266.90
TOP COVERS
ITEM
• Overall Height – Full: 4-1/4"; Intermediate: 3"; Half: 2-5/8".
PRICE
($)
BRASS FRAME —
BRASS CLOTH
44.70
44.70
ITEM
PART #
Brass – Full Ht.
Brass – Half Ht.
Brass w. Skirt – Full Ht. Brass w. Skirt – Half Ht. 8526
8527 8528
8529
Stainless – Full Ht.
Stainless – Half Ht.
Stainless w. Skirt – Full Ht.
Stainless w. Skirt – Half Ht.
PRICE ($)
8532 96.90
8533 96.90
8534113.20
8535113.20
www.wstyler.com
40.80
40.80
53.70
53.70
5
3" DIAMETER TEST SIEVES
DESIGNATION
U.S.A
METRIC
No. 3-1/2
No. 4
No. 5
No. 6
No. 7
No. 8
No. 10
No. 12
No. 14
No. 16
No. 18
No. 20
No. 25
No. 30
No. 35
No. 45
No. 50
No. 60
No. 70
No. 80
No. 100
No. 120
No. 140
No. 170
No. 200
No. 230
No. 270
No. 325
No. 400
No. 450
No. 500
No. 635
5.6 mm
4.75 mm
4.00 mm
3.35 mm
2.80mm
2.36 mm
2.00 mm
1.7 mm
1.4 mm
1.18 mm
1.0 mm
850 micron
710 micron
600 micron
500 micron
355 micron
300 micron
250 micron
212 micron
180 micron
150 micron
125 micron
106 micron
90 micron
75 micron
63 micron
53 micron
45 micron
38 micron
32 micron
25 micron
20 micron
STAINLESS FRAME —
STAINLESS CLOTH
•
•
•
BRASS FRAME —
STAINLESS CLOTH
FULL HT.
PART #
HALF HT.
PART #
PRICE
($)
FULL HT.
PART #
HALF HT.
PART #
PRICE
($)
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1324
1315
1325
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
44.30
47.80
47.80
47.80
52.10
52.10
54.00
56.60
56.60
72.40
78.20
115.80
134.00
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1565
1564
1566
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1648
1647
1649
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
32.50
35.90
35.90
35.90
36.10
38.20
39.50
43.60
46.20
59.70
62.60
92.60
107.70
Overall Height – Full: 1-3/4"; Half: 1-1/4".
Depth to Cloth – Full: 1-1/4"; Half: 5/8".
See Pages 12 and 13 for NIST Traceable
Certification Services.
TOP COVERS
ITEM
Stainless Stainless w. Ring
PART #
8411
8412
Brass
Brass w. Ring
8405
8406
BOTTOM PANS
ITEM
Stainless – Full Ht.
Stainless – Half Ht.
Stainless w. Skirt – Full Ht.
Stainless w. Skirt – Half Ht.
PART #
8407
8408
8409
8410
Brass - Full Ht.
Brass - Half Ht.
Brass w. Skirt - Full Ht.
Brass w. Skirt - Half Ht.
8401
8402
8403
8404
PRICE ($)
17.90
20.10
10.60
12.70
PRICE ($)
34.70
34.70
40.90
40.90
16.20
16.20
20.90
20.90
GOLD SERIES TEST SIEVES
• Guarantees that the permissable variation of
average opening as allowed by ASTM E-11
is reduced by 50%.
• Designed as “masters” for internal quality
assurance programs (8" diameter).
• Overall Height – Full: 2-5/8"; Half: 1-5/8"
• Depth to Cloth – Full: 2"; Half: 1"
• Each test sieve is optically examined, serialized,
and supplied with complete NIST traceable
documents.
6
www.wstyler.com
DESIGNATION
U.S.A.
METRIC
No. 20
No. 25
No. 30
No. 35
No. 40
No. 45
No. 50
No. 60
No. 70
No. 80
No. 100
No. 120
No. 140
No. 170
No. 200
No. 230
No. 270
No. 325
No. 400
No. 500
850 micron 710 micron
600 micron
500 micron
425 micron
355 micron
300 micron
250 micron
212 micron
180 micron
150 micron
125 micron
106 micron
90 micron
75 micron
63 micron
53 micron
45 micron
38 micron
25 micron
STAINLESS FRAME-STAINLESS CLOTH
FULL HT.
PART #
5199G
5200G
5201G
5202G
5203G
5204G
5205G
5206G
5207G
5208G
5209G
5210G
5211G
5212G
5213G
5214G
5215G
5216G
5217G
5218G
HALF HT.
PART #
PRICE ($)
5365G
5366G
5367G
5368G
5369G
5370G
5371G
5372G
5373G
5374G
5375G
5376G
5377G
5378G
5379G
5380G
5381G
5382G
5383G
5384G
389.10
389.10
389.10
389.10
389.10
389.10
389.10
389.10
389.10
389.10
389.10
411.30
411.30
411.30
411.30
423.10
441.40
458.40
488.50
522.30
200mm DIAMETER TEST SIEVES
DESIGNATION
METRIC
37.5 mm
31.5 mm
28.0 mm
26.5 mm
25.0 mm
22.4 mm
20.0 mm
19.0 mm
18.0 mm
16.0 mm
14.0 mm
13.2 mm
12.5 mm
11.2 mm
10.0 mm
9.5 mm
9.0 mm
8.0 mm
7.1 mm
6.7 mm
6.3 mm
5.6 mm
5.0 mm
4.75 mm
4.5 mm
4.0 mm
3.55 mm
3.35 mm
3.15 mm
2.8 mm
2.5 mm
2.36 mm
2.24 mm
2.00 mm
1.8 mm
1.7 mm
1.6 mm
1.4 mm
1.25 mm
1.18 mm
1.12 mm
1.00 mm
900 micron
850 micron
800 micron
710 micron
630 micron
600 micron
560 micron
500 micron
450 micron
425 micron
400 micron
355 micron
315 micron
300 micron
280 micron
250 micron
224 micron
212 micron
200 micron
180 micron
160 micron
150 micron
140 micron
125 micron
112 micron
106 micron
100 micron
90 micron
80 micron
75 micron
71micron
63 micron
56 micron
53 micron
50 micron
45 micron
40 micron
38 micron
36 micron
32 micron
25 micron
20 micron
U.S.A
1-1/2"
1-1/4"
—
1.06"
1"
7/8"
—
3/4"
—
5/8"
—
.530"
1/2"
7/16"
—
3/8"
—
5/16"
—
.265"
1/4"
No. 3-1/2"
—
No. 4
—
No. 5
—
No. 6
—
No. 7
—
No. 8
—
No. 10
—
No. 12
—
No. 14
—
No. 16
—
No. 18
—
No. 20
—
No. 25
—
No. 30
—
No. 35
—
No. 40
—
No. 45
—
No. 50
—
No. 60
—
No. 70
—
No. 80
—
No. 100
—
No. 120
—
No. 140
—
No. 170
—
No. 200
No. 230
—
No. 270
—
No. 325
—
No. 400
—
No. 450
No. 500
No. 635
STAINLESS FRAME —
STAINLESS CLOTH
FULL HT.
PART #
7256
7257
7258
7259
7260
7261
7262
7363
7264
7265
7266
7267
7268
7269
7270
7271
7272
7273
7274
7275
7276
7277
7278
7279
7280
7281
7282
7283
7284
7285
7286
7287
7288
7289
7290
7291
7292
7293
7294
7295
7296
7297
7298
7299
7300
7301
7302
7303
7304
7305
7306
7307
7308
7309
7310
7311
7312
7313
7314
7315
7316
7317
7318
7319
7320
7321
7322
7323
7324
7325
7326
7327
7328
7329
7330
7331
7332
7333
7334
7335
7336
7337
7338
7339
HALF HT.
PART #
7340
7341
7342
7343
7344
7345
7346
7347
7348
7349
7350
7351
7352
7353
7354
7355
7356
7357
7358
7359
7360
7361
7362
7363
7364
7365
7366
7367
7368
7369
7370
7371
7372
7373
7374
7375
7376
7377
7378
7379
7380
7381
7382
7383
7384
7385
7386
7387
7388
7389
7390
7391
7392
7393
7394
7395
7396
7397
7398
7399
7400
7401
7402
7403
7404
7405
7406
7407
7408
7409
7410
7411
7412
7413
7414
7415
7416
7417
7418
7419
7420
7421
7422
7423
PRICE
($)
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
73.70
75.90
75.90
77.40
77.40
84.70
84.70
92.70
92.70
100.10
100.10
113.90
113.90
131.40
131.40
149.90
149.90
189.00
189.00
217.00
242.20
541.70
BRASS FRAME —
STAINLESS CLOTH
FULL HT. HALF HT.
PART #
PART #
9714
9715
9716
9717
9718
9719
9720
9721
9722
9723
9724
9725
9726
9727
9728
9729
9730
9731
9732
9733
9734
9735
9736
9737
9738
9739
9740
9741
9742
9508
9509
9510
9511
9512
9513
9514
9515
9516
9517
9518
9519
9520
9521
9522
9523
9524
9525
9526
9527
9528
9529
9530
9531
9532
9533
9534
9535
9536
9537
9538
9539
9540
9541
9542
9543
9544
9545
9546
9547
9548
9549
9550
9551
9552
9553
9554
9555
9556
9557
9558
9794
9795
9797
9799
9814
9815
9816
9817
9818
9819
9820
9821
9822
9823
9824
9825
9826
9827
9828
9829
9830
9831
9832
9833
9834
9835
9836
9837
9838
9839
9840
9841
9842
9608
9609
9610
9611
9612
9613
9614
9615
9616
9617
9618
9619
9620
9621
9622
9623
9624
9625
9626
9627
9628
9629
9630
9631
9632
9633
9634
9635
9636
9637
9638
9639
9640
9641
9642
9643
9644
9645
9646
9647
9648
9649
9650
9651
9652
9653
9654
9655
9656
9657
9658
9894
9895
9897
9899
PRICE
$)
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
60.60
62.40
62.40
63.50
63.50
69.40
69.40
75.90
75.90
84.70
84.70
96.40
96.40
116.00
116.00
142.90
142.90
165.40
165.40
192.00
223.90
541.70
See Pages 12 & 13 for NIST Traceable Certification Services
• Conforms to current ISO 3310-1 and BS410
Specifications .
Note: 35 mesh backing cloth is available on test
sieves 100 mesh and finer.
• Overall Height – Full: 2-5/8"; Half: 1-7/8" .
•
Depth to Cloth – Full: 2"; Half: 1" .
• 300 mm diameter Test Sieves are available in
Stainless Frame and Stainless Cloth only.
Note: 35 mesh backing cloth is available on test
sieves 100 mesh and finer. $25.00
*1/8" opening is not included in ASTM E 11
Standard.
TOP COVERS
ITEM
PART #
PRICE ($)
Stainess
9902
27.90
Brass
9902M
15.20
ITEM
PART #
PRICE ($)
Stainless Full Height
Stainless Half Height
9901
9903
53.60
53.60
Brass Full Height
Brass Half Height
9901M
9903M
24.90
24.90
BOTTOM PANS
www.wstyler.com
7
6" DIAMETER TEST SIEVES
STAINLESS FRAME–
DESIGNATION
STAINLESS CLOTH
U.S.A.
METRIC
PART #
FULL HT. HALF HT.
PART #
PRICE ($)
1"
25.0 mm
3845
—
115.80
7/8"
22.4 mm
3846
—
115.80
3/4"
19.0 mm
3847
—
115.80
5/8"
16.0 mm
3848
—
115.80
.530"
13.2 mm
3849
—
115.80
1/2"
12.5 mm
3850
—
115.80
7/16"
11.2 mm
3851
—
115.80
3/8"
9.5 mm
3852
—
115.80
5/16"
8.0 mm
3853
—
115.80
.265"
6.7 mm
3854
—
115.80
1/4"
6.3 mm
3855
—
115.80
No. 3-1/2
5.6 mm
3856
4022
115.80
No. 4
4.75 mm
3857
4023
115.80
No. 5
4.00 mm
3858
4024
115.80
No. 6
3.35 mm
3859
4025
115.80
No. 7
2.80 mm
3860
4026
115.80
No. 8
2.36 mm
3861
4027
115.80
No. 10
2.00 mm
3862
4028
115.80
No. 12
1.7 mm
3863
4029
115.80
No. 14
1.4 mm
3864
4030
115.80
No. 16
1.18 mm
3865
4031
115.80
No. 18
1.00 mm
3866
4032
115.80
No. 20
850 micron
3867
4033
115.80
No. 25
710 micron 3868
4034
115.80
No. 30
600 micron
3869
4035
115.80
No. 35
500 micron
3870
4036
115.80
No. 40
425 micron
3871
4037
115.80
No. 45
355 micron 3872
4038
115.80
No. 50
300 micron
3873
4039
115.80
No. 60
250 micron 3874
4040
115.80
No. 70
212 micron
3875
4041
115.80
No. 80
180 micron
3876
4042
115.80
No. 100
150 micron
3877
4043
115.80
No. 120
125 micron
3878
4044
115.80
No. 140
106 micron
3879
4045
115.80
No. 170
90 micron
3880
4046
115.80
No. 230
63 micron
3882
4048
145.20
No. 270
53 micron
3883
4049
168.70
No. 325
45 micron
3884
4050
194.80
No. 400
38 micron
3885
4051
270.20
No. 450
32 micron
3889
4053
285.60
No. 500
25 micron
3386
4052
315.70
TOP COVERS
ITEM
Stainless
Stainless w. Ring
BOTTOM PANS
ITEM
Stainless – Full Ht.
Stainless w. Skirt – Full Ht.
PART #
8471
8472
PART #
8467
8469
PRICE ($)
43.60
43.60
10" DIAMETER TEST SIEVES
DESIGNATION
U.S.A.
4"
3-1/2"
3"
2-1/2"
2.12"
2"
1-3/4"
1-1/2"
1-1/4"
1.06"
1"
7/8"
3/4"
5/8"
.530"
1/2"
7/16"
3/8"
5/16"
.265"
1/4"
No. 3-1/2
No. 4
No. 5
No. 6
No. 7
No. 8
No. 10
No. 12
No. 14
No. 16
No. 18
No. 20
No. 25
No. 30
No. 35
No. 40
No. 45
No. 50
No. 60
No. 70
No. 80
No. 100
No. 120
No. 140
No. 170
No. 200
PRICE ($)
73.80
92.20
• Overall Height – Full: 2-5/8"; Half: 1-7/8".
• Depth to Cloth – Full: 1-3/4"; Half: 1".
Note: 35 mesh backing cloth is available on test sieves
100 mesh and finer. ($25.00 additional)
*1/8" opening is not included in ASTME 11 Standard.
STAINLESS FRAME–
STAINLESS CLOTH
•
METRIC
PART #
PRICE ($)
5799
5800
5801
5802
5803
5804
5805
5806
5807
5808
5809
5810
5811
5812
5813
5814
5815
5816
5817
5818
5819
5820
5821
5822
5823
5824
5825
5826
5827
5828
5829
5830
5831
5832
5833
5834
5835
5836
5837
5838
5839
5840
5841
5842
5843
5844
5845
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
215.30
220.40
234.60
242.70
100 mm
90 mm
75 mm
63 mm
53 mm
50 mm
45 mm
37.5 mm
31.5 mm
26.5 mm
25.0 mm
22.4 mm
19.0 mm
16.0 mm
13.2 mm
12.5 mm
11.2 mm
9.5 mm
8.0 mm
6.7 mm
6.3 mm
5.6 mm
4.75 mm
4.00 mm
3.35 mm
2.80 mm
2.36 mm
2.00 mm
1.7 mm
1.4 mm
1.18 mm
1.00 mm
850 micron
710 micron
600 micron
500 micron
425 micron
355 micron
300 micron
250 micron
212 micron
180 micron
150 micron
125 micron
106 micron
90 micron
75 micron
TOP COVERS
ITEM
Stainless
Stainless w. Ring
PART #
8516
8517
PRICE ($)
96.50
96.50
BOTTOM PANS
ITEM
Stainless – Full Ht.
Stainless w. Skirt – Full Ht.
PART #
8512
8514
PRICE ($)
152.50
181.70
Overall Height – Full: 4"
Note: 35 mesh backing cloth is available on test sieves
100 mesh and finer. ($25.00 additional)
*1/8" opening is not included in ASTME 11 Standard.
See Pages 12 & 13 for Value Added NIST Traceable Certification Services.
8
www.wstyler.com
18" DIAMETER TEST SIEVES
DESIGNATION
BRASS FRAME —
STAINLESS CLOTH
U.S.A.
METRIC 4"
100 mm
3-1/2"
90 mm
3"
75 mm
2-1/2"
63 mm
2.12"
53 mm
2"
50 mm
1-3/4"
45 mm
1-1/2"
37.5 mm
1-1/4"
31.5 mm
1.06"
26.5 mm
1"
25.0 mm
7/8"
22.4 mm
3/4"
19.0 mm
5/8"
16.0 mm
.530"
13.2 mm
1/2"
12.5 mm
7/16"
11.2 mm
3/8"
9.5 mm
5/16"
8.0 mm
.265"
6.7 mm
1/4"
6.3 mm
No. 3-1/2
5.6 mm
No. 4
4.75 mm
No. 5
4.00 mm
No. 6
3.35 mm
No. 7
2.80 mm
No. 8
2.36 mm
No. 10
2.00 mm
No. 12
1.7 mm
No. 14
1.4 mm
No. 16
1.18 mm
No. 18
1.00 mm
No. 20
850 micron
No. 25
710 micron No. 30
600 micron
No. 35
500 micron
No. 40
425 micron
No. 45
355 micron
No. 50
300 micron
No. 60
250 micron
No. 70
No. 80
180 micron
No. 100
150 micron
No. 120
125 micron
No. 140
106 micron
No. 170
90 micron
No. 200
75 micron
No. 230
63 micron
PART #
7503
7504
7505
7506
7507
7508
7509
7510
7511
7512
7513
7514
7515
7516
7517
7518
7519
7520
7521
7522
7523
7524
7525
7526
7527
7528
7529
7530
7531
7532
7533
7534
7535
7536
7537
7538
7539
7540
7541
7542
7543
7544
7545
7546
7547
7548
7549
7550
TOP COVERS
ITEM
PART #
Brass
8558
BOTTOM PANS
ITEM
PART #
PRICE ($)
Brass-full Ht.
8556
210.00
PRICE ($)
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
285.00
SPECIAL TEST SIEVE PRODUCTS
All Wet Wash Test Sieves are constructed with a
brass frame and stainless steel sieve cloth.
ITEM
8" Diameter Test Sieve with 4-5/8"
overall height and 4-1/8" depth to cloth
ITEM
8" Diameter Test Sieve with 8-5/8"
overall height and 8-1/8" depth to cloth
ITEM
3" Diameter Test Sieve with 4"
overall height and 3-1/2" depth to cloth
ITEM
12" Diameter Test Sieve with 9"
overall height and 8" depth to cloth
PRICE ($)
U.S.A. #4
through #325
$199.10
PRICE ($)
U.S.A. #4
through #325
$199.10
PRICE ($)
U.S.A. #4
through #325
$72.10
PRICE ($)
U.S.A. #4
through #325
$265.30
• All test sieves above include drain holes in lower
frame.
• 35 mesh backing is recommended for U.S.A. #200
and finer (Add $25.00).
PRICE ($)
75.00
• Overall Height – 5-1/2"
*****************
TEST SIEVE CLEANING BRUSHES
• Depth to Cloth – 4-1/2"
Nylon Model
For cleaning sieves having
120 mesh and finer.
Note: 35 mesh backing cloth is available on test sieves
100 mesh and finer. ($25.00 additional)
*1/8" opening is not included in ASTME 11 Standard.
Customer Service 800.321.6188
PART #
8577 Nylon
PRICE ($)
19.60
Brass Model
For cleaning sieves having
100 mesh and coarser.
PART #
8576 Brass
PRICE ($)
19.60
www.wstyler.com
9
AIR JET TEST SIEVES
DESIGNATION
STAINLESS FRAME —
STAINLESS CLOTH
U.S.A
METRIC
PART #
No. 8
No. 10
No. 12
No. 14
No. 16
No. 18
No. 20
No. 25
No. 30
No. 35
No. 40
No. 45
No. 50
No. 60
No. 70
No. 80
No. 100
No. 120
No. 140
No. 170
No. 200
No. 230
No. 270
No. 325
No. 400
No. 450
No. 500
No. 635
2.36 mm
2.00 mm
1.7 mm
1.4 mm
1.18 mm
1.0 mm
850 micron
710 micron
600 micron
500 micron
425 micron
355 micron
300 micron
250 micron
212 micron
180 micron
150 micron
125 micron
106 micron
90 micron
75 micron
63 micron
53 micron
45 micron
38 micron
32 micron
25 micron
20 micron
NEW!
•
•
•
•
•
10
9423
9418
9424
9425
9152
9321
9153
9250
9154
9056
9016
9251
9142
9143
9252
9101
9186
9253
9015
9014
9003
9004
9102
9011
9133
9410
9202
9415
PRICE (S)
116.30
116.30
116.30
116.30
116.30
116.30
116.30
116.30
116.30
116.30
116.30
116.30
116.30
116.30
116.30
116.30
116.30
121.10
126.70
133.10
140.20
156.80
182.70
208.40
271.20
282. 40
321.70
539.70
• 200mm in diameter.
• Overall Height – 1-3/4".
• Depth to Cloth – 1-1/8".
• For use with Air Jet Sieving Systems.
• Each Test Sieve is supplied with a Serial
Number and a matching Test Sieve
Certificate of Compliance.
• See Pages 12 and 13 for NIST Traceable
Certification Services.
Customer Service 800.321.6188
ALPINE SMART SIEVES (for e200LS)
200 mm diameter
Overall height - 1"
Depth to cloth - 7/8"
For use with e200LS
ID chip for instant recognition
www.wstyler.com
Designation
No. 5 Sieve
No. 6 sieve
No. 7 sieve
No. 8 sieve
No. 10 sieve
No. 12 sieve
No. 14 sieve
No. 16 sieve
No. 18 sieve
No. 20 sieve
No. 25 sieve
No. 30 sieve
No. 35 sieve
No. 40 sieve
No. 45 sieve
No. 50 sieve
No. 60 sieve
No. 70 sieve
No. 80 sieve
No. 100 sieve
No. 120 sieve
No. 140 sieve
No. 170 sieve
No. 200 sieve
No. 230 sieve
No. 270 sieve
No. 325 sieve
No. 400 sieve
No. 450 sieve
No. 500 sieve
No. 635 sieve
Part No.
522260 522262 522265
522267 522269 522272 522274 522276 522278 522214 522216
522219 522221
522223 522226 522228 522230 522233 522235 522237 522239
522241 522243
522245 522247
522250 522252 522254
522257
522258
522259
Price($)
$150.00
$150.00
$150.00
$130.00
$133.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$130.00
$170.00
$170.00
$180.00
$295.00
$350.00
$460.00
$760.00
TYLER SIEVING SOFTWARE 3.0
W.S. TYLER is excited to introduce Sieve Software 3.0.
The product was designed as a fast and simple tool to record, print and save data from a traditional
Test Sieve Analysis.
The user- friendly spreadsheet format allows the user to personalize the files and detail each
sieve test. The technician must enter the sieve series required and the sample weight retained
on each sieve following the test run. The software will
perform the rest of the calculations and create
statistical and graphical displays for analysis.
The Tyler Sieving Software 3.0 simplifies the
Test Sieving process and is affordably priced.
SIEVING SOFTWARE 3.0
Part #
List Price
SS-300
$29.95 USD
ALPINE e200 LS
The Hosokawa ALPINE Air Jet Sieve e200 LS has an
attractive ergonomic design and fits nicely on a work
bench. A high resolution 6.4” TFT touch screen allows
intuitive operation with its easy-to-follow user interface.
The integrated analysis guide leads you through comparison analysis, trend analyses for statistics, language
switch-over, and setting of country-specific measurement
units. Data evaluation is given in tabular form (graphic
form with eControl Professional and eControl Ultimate).
SOFTWARE OPTIONS
• eControl Basic
Simple sieving user level for quick individual analysis.
Intuitive menu guidance makes for easy and reliable
operation. Can be upgraded to higher software versions.
• eControl Professional
Expanded package that includes interface with a balance
and additional graphic display abilities. Graphic evaluation is plotted in a cumulative curve. Can be upgraded to
higher software version.
• eControl Ultimate
For special demands that includes traceability, such as
for pharmaceuticals. Representation of residual fines
concentration and relevant information.
Call Customer Service 800.321.6188 for pricing.
www.wstyler.com
11
LABORATORY SERVICES
CERTIFIED TEST SIEVE (ASTM E11-09 Equivalent - Inspection Grade):
•
New and in-use Test Sieves.
• Opening measured with a computerized video imaging system, + / - .5 micron.
• Examined to the current ASTM and ISO specifications.
• Products are serialized and supplied with NIST traceable documents, including
statistical information on opening sizes and wire diameters (see sample IBC).
Part # 9998 - Price = $84.00 (does not include sieve).
CERTIFIED PLUS TEST SIEVE (ASTM E11-09 Equivalent - Calibration Grade):
• New and in-use Test Sieves.
• Openings measured with a Computerized Video Imaging System, (+ / - .5 micron).
• Examined to the current ASTM or ISO Specifications.
• Increased # of measurements provide a 99.73% level of confidence (K-Factor) vs
the Inspection grade Test Sieve.
• Products are serialized and supplied with NIST traceable documents, including
statistical information on opening sizes and wire diameters.
Part # 9992 - Price = $140.00 each (does not include sieve).
RECOMMENDED IN-USE SIEVE RECERTIFICATION SCHEDULE
Aperture
5 inches to .25 inches
US No. 31/2 to US No. 12
US No. 14 to US No. 40
US No. 45 to US No. 140
US No. 170 to US No. 325
US No. 400 to US No. 635
* Whichever comes last
Schedule*
80 uses or 36 months
70 uses or 30 months
60 uses or 24 months
50 uses or 18 months
35 uses or 12 months
20 uses or 6 months
• Examinations to ASTM E-11-04
12
www.wstyler.com
upon request.
Customer Service 800.321.6188
LABORATORY SERVICES
PARTICLE ANALYSIS SERVICES
• Fine, dry applications from 2" through 635 mesh (20 micron).
• Service includes detailed analysis results.
Part # 9995 - Testing charge = $150.00 per test and/or sample
MATCHED / CERTIFIED TEST SIEVE
• Individually performance tested against W.S. Tyler Master Series Sieves.
• Performance test result tolerances, +/- 2.5% .
• Certified including NIST Traceable and Performance Test Documents.
• Designed for critical multiple location comparison analysis.
• U.S.A. No. 8 through U.S.A. No. 325, 8" diameter Stainless Steel Cloth Sieves.
Part # 9991 - Price = $200.00 (does not include sieve)
www.wstyler.com
13
TEST SIEVE SHAKERS
RO-TAP® RX-29 and RO-TAP® RX-30 Models
The industry standard in test sieve shakers, W.S. Tyler’s Ro-Tap has a unique two-dimensional operation:
a horizontal, circular motion and a vertical, tapping motion. This special action allows material particles to
stratify and “seek” critical openings in the test media. This unit provides the most accurate and consistent
particle analysis testing.
The RX-29 model is designed for testing with 8" diameter test sieves; the RX-30 model is designed for
testing with 12" diameter test sieves.
•
•
•
•
•
Testing applications — RX-29: 2" down through 635 mesh
micron); RX-30: 4" down through 500 mesh (25 micron)
(20
Requires minimal maintenance
Heavy-duty use
Features 99 minute digital timer/clock, tolerance, 0.1 second
Each unit is test run and serialized prior to shipment
SPECIFICATIONS
•
•
•
•
Oscillations per Minute: 278 ±10
Oscillations Displacement: 1-1/8" x 7/16"
Taps per Minute: 150±10
Hammer Weight; 5 lbs., 6 oz.
Test Sieves sold separately.
Recommendations regarding the maximum number of test sieves that can be used with Ro-Tap Test Sieve Shakers:
MODEL
NUMBER OF SIEVES
FULL HEIGHT
HALF HEIGHT
ACCESSORIES
RX-29 6 Sieves w/FH Pan 13 Sieves w/HH Pan
(8" or 200mm Dia.)
RX-30
4 Sieves w/FH Pan
8 Sieves w/HH Pan
(12" or 300mm Dia.) 6 Sieves w/HH Pan*
* Intermediate height
Sound Enclosure Cabinets........... Page 17
Test Stand.................................... Page 17
Parts Maintenance Kits................ Page 15
Conversion Kits............................ Page 19
Lab Kits consisting of Ro-Tap, sound enclosure
and test stand are available at a discounted price.
A top cover is required for testing.
Dimensions — Unit: 28" wide x 21" deep x 25" high (71cm x 54cm x 64cm)
Weight — Unit: 180 lbs. (82 kg)
Shipping: 31" wide x 23" deep x 30" high (77cm x 59cm x 77cm)
Shipping: 190 lbs. (86 kg)
PART #
AT 1725 RPM, 60 CYCLE CURRENT
DESCRIPTION
PR ICE ($)
RX-29
RX-29-16
RX-30
RX-30-16
115v (8" Test Sieves)
230v (8" Test Sieves)
115v (12" Test Sieves)
230v (12" Test Sieves)
2,125.00
2,125.00
2,432.00
2,432.00
PART #
RX-29-2
RX-29-10
RX-30-2
RX-30-10
AT 1425 RPM, 50 CYCLE CURRENT
DESCRIPTION
PRICE ($)
115v (8" Test Sieves)
230v (8" Test Sieves)
115v (12" Test Sieves)
230v (12" Test Sieves)
All models are wired for single phase current.
14
www.wstyler.com
2,188.00
2,188.00
2,477.00
2,477.00
RO-TAP® E SIEVE SHAKERS
RO-TAP® RX-29-E and RO-TAP® RX-30-E Models:
The RO-TAP® Electronic Test Sieve Shaker operates with 8” or 12" diameter Test Sieves and offers precise
sieving results. The compact, RO-TAP® RX-29-E (8" Test Sieves) unit requires minimal space on a laboratory
countertop. The RO-TAP® RX-30-E (12" Test Sieves) model is a floor unit. Controls can be remotely
mounted for convenient operation. The units are designed for light to medium testing applications.
The Standard Model Features:
• Controlled Constant Amplitude
• Digital Controls
• Quick Release Hold Downs
• Fine and Coarse Analysis Control Settings
Dimensions: Model E 8" (hold 9 full height or 15 half height w/pan)
Unit:
14” wide x 12” deep x 37” high
Shipping: 20" wide x 20" deep x 32" high
Weight –
Unit: 80 lbs. (36 kg)
Power Options: 110 v. (220v pricing on request)
Shipping: 90 lbs. (41 kg)
Dimensions: Model E 12" (hold 7 full height or 10 half height w/pan)
Unit:
16” wide x 18” deep x 40” high
Shipping: 31" wide x 31" deep x 39" high
Weight –
Unit: 117 lbs. (53 kg)
Power Options: 110 v. (220v pricing on request)
Shipping: 172 lbs. (78 kg)
PART #
Test Sieves sold separately.
RX-29-E
RX-30-E
560204
560210
R-30033-E
DESCRIPTION
PRICE ($)
Electronic 8" Shaker
4,052.00
Electronic 12" Shaker
5,223.00
Threaded Clamping Rod107.80 (each)
Twin Nut Clamp
154.75 (each)
Twin Nut Clamping System Kit 472.90
RO-TAP® SIEVE SHAKER MAINTENANCE KITS
To ensure lasting dependable service, RO-TAP® Sieve Shakers must occasionally be upgraded with parts that are
long-wearing, durable, and cost-effective. Maintenance kits are available for the replacement of parts due to normal
wear and tear. W.S. Tyler recommends the use of these kits as a means to minimize down-time due to minor
repairs. The purchase of a minor maintenance kit is also recommended with each new RO-TAP® Sieve Shaker.
PART NO.
10121
10122
10123
DESCRIPTION
RX-29, RX-30, & RX-94
RX-29, RX-30, & RX-94
RX-29
Major Maintenance Kit
RX-94
Major Maintenance Kit
INCLUDES
2 Eccentric Discs (R-10034), 1 Flange Bushing (R-10061),
1 Bearing (R-10062),
1 Cork (R-10066A),
and 2 Flange Bearings (R-10063)
1 Minor Maintenance Kit (10121),
1 Timing Belt (R-10058),
1 Upper Carrying Plate (R-30008),
1 Cam Gear (R-20039),
and 1 Timing Belt Pulley (R-30015)
Kit Part No. 10122
except Upper Carrying Plate
PRICE * ($)
94.00
437.55
360.75
* Prices reflect an approximate 10% discount versus purchasing the items separately
www.wstyler.com
15
TEST SIEVE SHAKERS
RO-TAP® RX-94 Model
RO-TAP® RX-94 Test Sieve Shaker utilizes the same tradition-
al design as the RX-29 and RX-30 models. In addition, the unit
features a cavity that allows for two “stacks” of 8" diameter test
sieves. This allows for twice the processing capacity in nominally the same time required to complete one test.
• Designed for use with 8" diameter test sieves only.
• Testing application: 2" down through 635 mesh (20 micron).
• Newly designed easy lock clamping system.
Test Sieves sold separately.
SPECIFICATIONS
• Oscillations per Minute: 278 ±10
• Oscillation Displacement: 1-1/8" x 7/16"
• Taps per Minute: 150 ±10• Hammer Weight: 5 lbs., 6 oz.
Recommendations regarding the maximum number of test sieves that can be used with Ro-Tap Test Sieve Shakers:
MODEL
RX-94
(8" or 200mm Dia.)
NUMBER OF SIEVES
FULL HEIGHT
HALF HEIGHT
2 Stacks of 6 Sieves
w/FH Pan
2 Stacks of 13 Sieves
w/HH Pan
A top cover is required for testing.
Dimensions —
PART #
RX-94
RX-94-1
RX-94-2
RX-94-3
DESCRIPTION
115v. 60 Hz Current
230v. 60 Hz Current
115v. 50 Hz Current
230v. 50 Hz Current
PRICE ($)
3,519.00
3,519.00
3,519.00
3,519.00
Prices do not include test sieves.
All models are wired for single phase current only.
Unit: 30" wide x 27" deep x 26" high (75cm x 68cm x 56cm)
Weight —
Shipping: 31" wide x 31" deep x 30" high (77cm x 78cm x 75cm)
Unit: 220 lbs. (100 kg)
Shipping: 242 lbs. (110 kg)
RX-812 Coarse Sieve Shaker Model
Designed to be used in coarse testing applications, the affordable RX-812
Coarse Sieve Shaker has the unique capability of using both 8" diameter and
12" diameter test sieves, simply by using the quick-change adapters provided. The RX-812 has a quiet operation and utilizes an effective action that
gives consistent, accurate results.
• Designed for use with 8" and 12" diameter test sieves.
• Not recommended for analysis with particles 150 micron (100 mesh and
finer) and smaller.
Test Sieves sold separately.
SPECIFICATIONS
• Oscillations per Minute: 280 (60Hz); 231 (50Hz).
Recommendations regarding the maximum number of test sieves that can be used with Ro-Tap Test Sieve Shakers:
MODEL
RX-812 (8" or 200mm Dia.)
RX-812 (12" or 300mm Dia.)
A top cover is required for testing.
Dimensions —
16
NUMBER OF SIEVES
FULL HEIGHT
HALF HEIGHT
6 Sieves w/FH Pan 13 Sieves w/HH Pan
4 Sieves w/FH Pan 6 Sieves w/HH Pan*
or 8 Sieves w/HH Pan
* Intermediate height.
PART #
RX-812
RX-812-1
RX-812-2
RX-812-3
PRICE ($)
1,116.00
1,116.00
1,116.00
1,116.00
Prices do not include test sieves.
All models are wired for single phase current only.
Unit: 23" wide x 15" deep x 13" high (59cm x 38cm x 33cm)
Shipping: 25" wide x 19" deep x 15" high (64cm x 49cm x 38cm)
www.wstyler.com
DESCRIPTION
115v. 60 Hz Current
230v. 60 Hz Current
115v. 50 Hz Current
230v. 50 Hz Current
Weight —
Unit: 55 lbs. (25 kg)
Shipping: 95 lbs. (28 kg)
RO-TAP® SOUND ENCLOSURE CABINET & TEST STAND
Designed to be used exclusively with Ro-Tap Sieve Shakers, operating noise levels are reduced from approximately
85 dB to 78 dB. The cabinets are fabricated with 18 gauge
steel and a 1" metal faced, acoustic foam inner liner.
Specifically designed for RX-29 and RX-30 Ro-Tap
Sieve and RX-812 Coarse Sieve Shaker, the Ro-Tap
Test Stand can be used with or without the
Sound Enclosure Cabinet.
•
•
•
•
•
Allows for relatively fast, simple installation and set-up of
the Ro-Tap Sieve Shaker.
Attractive, sturdy steel construction, with anchor
brackets for fastening to floor or foundation.
Allows for optimal use of available laboratory space
dedicated to test sieving.
CABINET MODEL #
R-30050 (See Picture)
RX-99 (Not Pictured)
DESCRIPTION
RX-29 & RX-30
RX-94
PRICE ($)
603.45
1,034.00
PARTS #
R-40041 (See Picture)
R-10099 (RX-99 only)
DESCRIPTION
Test Stand
Cover Springs w/Ball Stud
PRICE ($)
344.85
64.50
ROTARY SIFTER RX-20
•
RX-20 Rotary Sifter offers classic design and efficient operation in an economical package. A proven sieving method preferred by many DOTs, based on a
popular design developed many years ago. The Rotary Sifter offers a faster
conversion from 8-12 inch or 200-300mm diameter sieves. The sieve stack
capacity ranges from six 12 inch diameter full height sieves with pan or up to
twenty 8 inch diameter half-height sieves with pan.
•
The totally enclosed cabinet allows safe, dust-free operation. Individual tapping hammers assist passage of near-size particles. The digital timer has an
LED display which precisely times operation up to 99 minutes at +/- 1 second.
The system is driven by a 1/3hp continuous-duty motor.
*
*
*
*
Accurate results
Simple and efficient
Dimensions: 19x24x58in
Estimated ship weight: 215lb
Customer Service 800.321.6188
PART #
DESCRIPTION
PRICE ($)
RX - 20
ROTARY SIFTER
$2,226.15
www.wstyler.com
17
SIEVING ACCESSORIES
ULTRASONIC TEST SIEVE CLEANER
Produces ultrasonic vibrations in a cleaning fluid bath,
which causes contaminants to become dislodged from both
sieve frame and media.
•
•
•
•
•
•
8" or 200mm diameter test sieves only
Compact and portable
Stainless steel oscillation tank
Built-in timer
Unit weight: 12 lbs.
Solution not included (mild detergent recommended)
PART # PRICE ($)
P-1405
1,494.60
Dimensions — 9 1/2" diameter x 10" high (24cm x 25cm)
Customer Service 800.321.6188
WET TEST SIEVING KIT
Allows for testing in wet environment when material is not
soluble in water. (Kit does not include RO-TAP® shaker)
•
•
For use with W.S. Tyler Ro-Tap RX-29 and RX-94
Sieve Shakers.
Kit weight: 27 lbs.
MODEL RX-29 RX-94
PART #
LA11112
LA11194
PRICE ($)
842.10
907.40
* Test Sieving Kit includes: Cover, Pan, Hoses,
18
www.wstyler.com
COVER WITH SPOUT
PART #
8498
PRICE($)
240.00
PAN WITH SPOUT
PART #
8495
PRICE($)
260.00
SAMPLING DEVICES
SAMPLING SPLITTERS
Reduces or halves material samples for making sieve tests. The
Splitters maintain representative particle size distribution while
reducing the original sample size.
Dimensions —
SS-50: Unit: 12" wide x 14" deep x 12" high (30cm x 36cm x 30cm)
Shipping: 14" wide x 16" deep x 16" high (36cm x 41cm x 41cm)
SS-100: Unit: 22" wide x 16" deep x 16" high (56cm x 41cm x 41cm)
Shipping: 24" wide x 26" deep x 16" high (61cm x 66cm x 41cm)
Weight –
SS-50: Unit: 10 lbs. (5 kg)
SS-100:
Unit: 25 lbs. (10 kg)
Shipping: 16 lbs. (7 kg) Shipping: 35 lbs. (12 kg)
PART #
SS-50
DESCRIPTION
Sample Splitter
w/14 1/2" Discharge Chutes
MAX. PARTICLE SIZE PRICE ($)
SS-100 Sample Splitter
w/16 1/2" Discharge Chutes
1/8"
1/4"
568.00
568.00
SPINNING RIFFLER
The RX-230 Spinning Riffler uses a vibratory feeder to provide
a constant flow of material from the stainless steel hopper. The
vibrating feeder then feeds the sampling tubes from 1 to 16
individual samples. Each sample can then be capped and stored
immediately, with minimal handling and little chance for outside
contamination.
Spin riffling is the method of choice for sampling accuracy and
reliability for dry, free flowing particles. This unit will virtually
eliminate operator error and bias associated with other types of
sampling devices.
The RX-230 Spinning Riffler includes a sixteen-port dividing head,
a set of sixteen standard tube sample vessels, a sample drum to
contain the vessels and a hopper plate for positioning the vessels
in the drum. All of these parts are available as replacement parts. PART #
Dimensions — 13" wide x 20 1/2" deep x 23" high
Weight — 25 lbs.
RX-230
DESCRIPTION
PRICE ($)
Spinning Riffler/Dual Voltage
6,575.65
RO-TAP® Conversion Kits
KIT PART NO.
DESCRIPTION
PRICE ($)
RX-32
Ro-Tap 12" Diameter to 8" Diameter Test Sieve Kit
482.00
R-30033-1
Ro-Tap 8" Diameter to 3" Diameter Test Sieve Kit
481.75
R-40038
Ro-Tap Digital Timer Conversion Kit — 115 Volt
202.85
R-40039
Ro-Tap Digital Timer Conversion Kit — 230 Volt
202.85
Customer Service 800.321.6188
www.wstyler.com
19
RO-TAP® RX-29 AND RX-30 PARTS DIAGRAM
See Page 15 for Recommended Service Parts Kits
20
www.wstyler.com
RO-TAP® RX-29 AND RX-30 PARTS
ITEM NO.
PART NO.
1
107770
2
R-20029
3
R-20023
4
R-30019
5
R-30010
6
R-10036
7
R-10038
8
R-20027
9
R-30008
9A
R-30008-1
9B *
R-30027
10
R-30009
12
R-20039
13
R-30015
14
R-10034
15
R-10032
16
R-30007
16
R-30011
17
R-30006
17
R-30013
18
R-30023
18
R-30022
19
R-20019
20
R-20020
21
R-20033
22
R-10028
23
R-10029
23A
106582
24
R-10042
25
R-10039
26
R-10035
27
R-10066-A
29
R-10033
30
R-30018
31
ZA11167
32
R-10030
33
R-40011
34
R-10061
35
R-10062
36
R-10063
37
ZF10168
38
R-10065
39
ZF10174
40
R-10070
R-10048
41
R-40029
41
R-40037
42
P-1500-23
42A
ZF10183
42B
ZF10168
43
R-10058
44
R-10055
45
ZZ10068
45A
ZZ10323
47
R-10079
48
ZF10221
49
ZF10222
50
ZF10231
51
ZF10241
51A
ZF10240
52
114162
53
ZF10251
54
R-20082
55
ZA10148
56
ZF10271
60 *
R-10018
61 *
R-10112
62 *
107764
DESCRIPTION
REQ’D.
Base
1
Hammer
1
Hammer Block
1
Sheet Guard
1
Rotating Guard
1
Lift Rod
2
Upper Main Shaft Washer
1
Main Shaft
1
Upper Carrying Plate – RX29 – plastic
1
Upper Carrying Plate – RX-29 – 1
Heavy-Duty Cast Aluminum (see inset)
Upper Carrying Plate –RX-30–steel
1
Lower Carrying Plate
1
Cam Gear
1
Timing Belt Pulley
1
Eccentric Disc.
2
Block
1
Sieve Cover– RX-29
1
Sieve Cover – RX-30
1
Sieve Support Plate – RX-29
1
Sieve Support Plate – RX-30 1
Sieve Support Clamp Bar – RX-29
1
Sieve Support Clamp Bar – RX-30
1
Backup Plate
1
Bearing Plate
1
Shield
2
Tube Spacer
2
Cam Shoulder Screw
1
1/2" I.D. Shim
2
Main Shaft Key to Eccentric
2
Main Shaft Key – Lower
1
Hammer Pin
1
Cork Plug (10 cork plugs per pack)
1 pk.
Tie Rod
2
Motor Adapter
1
Grommet 2
Lift Rod Coupling (2.50" long)
1
Pedestal Cover
1
Flange Bearing
1
Bearing
1
Flange Bearing
2
Thrust Washer
1
Steel Bushing 1
3/8 - 16 NC x 2.25" Carriage Bolt 3
Sprocket – 14 teeth (1800 RPM) w/ Set Screw
1
Sprocket – 17 teeth (1500 RPM) w/ Set Screw
1
Electronic Timer (115V)
1
Electronic Timer (230V)
1
Motor – 1/4 H.P. 115/230V 60/50Hz 1 Phase
1
3/8-16 x 1.00" Long Hex Head Screw
4
3/8 I.D. Flat Washer
4
Timing Belt
1
Shim
1
1/2 - 13 x 2.50" long Hex Hd. Bolt 1
1/2 I.D. Lock Washer
1
Clamp Screw
2
3/8" Lock Nut 3
1/2" Lock Nut
1
10 - 32 x .50" Long Flat Head Socket Cap Scr.
3
3/8 - 16 x .75" Long Flat Head Socket Cap Scr. 2
3/8 - 16 x .75” Long Hex Head Screw
2
3/8 - 16 x .62" long Hex Hd. Screw
2
5/16 - 24 x 1.25“ Long Socket Head Cap Scr.
1
Adjustable Handles (pair)
1
#10-24 x .25" Socket Hd. Set Screw
1
3/8 I.D. x 1.50" O.D. Fender Washer
1
Timer Cord w/ Plug
1
Straight Connector (APC-050)
2
Flexible Conduit
1
PRICE ($)
889.35
101.50
69.90
8.60
24.35
22.20
9.35
55.05
87.00
235.90
677.10
352.85
185.90
81.65
33.65
33.65
68.25
145.75
27.80
40.65
115.90
127.30
38.55
56.10
7.30
14.10
29.20
2.75
2.75
2.75
7.90
25.50
33.65
18.25
2.70
18.25
18.25
12.25
12.25
4.95
2.70
9.35
2.00
45.45
48.15 183.75
183.75 183.75
2.70
2.70
34.80
2.35
2.70
2.00
10.85
2.70
2.00
2.00
2.00
2.70
1.95
2.00
24.75
2.70
2.00
12.25
6.90
4.20
* Items not shown
Customer Service 800.321.61
www.wstyler.com
21
RO-TAP® RX-94 PARTS DIAGRAM
•
See Page 15 for Recommended Service Parts Kits
22
www.wstyler.com
57
RO-TAP® RX-94 PARTS
ITEM NO.
1
2
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31 32
33
34
35
36 37
38
39
40
41 *
42
43
44
45
46
47
48
48A
49
50
51
52
53
54
55
56 57
58
59
60 *
61 66
77
78
PART NO.
DESCRIPTION
R-40023
ZA11167
R-10061
R-10062
R-20027
R-10055
R-10034
R-10042
ZF10174
R-10032
R-10065
ZF10168
ZF10221
R-40017
R-10028
R-20020
R-20019
ZF10221
R-40019
R-30006
R-40018
R-40021
R-10079
R-20033
ZF10241
ZF10231
R-20082
R-10066-A
R-30010
R-30019
R-10038
114162
R-20029
R-20023
R-10063
R-10035
ZA10148
ZZ10068
ZZ10323
R-10018
P-1500-23
R-30018
R-10070
ZF10183
ZF10168
R-20039
R-10029
106582
ZF10222
R-10036
R-10030
ZF10251
R-30015
ZF10271
R-10039
R-10058
R-40011
R-40020
R-40030
R-40029
R-40037
R-10118
R-10099-30
114165
Painted Base Weldment
Grommet
Flanged Bearing
Bearing
Mainshaft
Shim 1.42 O.D. x .0155 Thick
Eccentric Disc
Main Shaft Key
3/8-16 x 2.25" Carriage Bolt
Block
Steel Bushing .62 O.D. x .385 I.D. x 1.25"
3/8" Flatwasher
3/8-16 Locknut
Lower Carrying Plate
Tube Spacer
Bearing Plate
Back-Up Plate
3/8-16 Locknut
Upper Carrying Plate
Support Plate
Dual Sieve Support Clamp Bar
Tie Rod
Clamp Screw
Shield
3/8-16 x .75" long Flat Head Screw
#10-32 x .50" long Flat Head Screw
Adjustable Handles (pair)
Cork Plug (10 cork plugs per pack)
Rotating Guard Assembly
Sheet Guard
Upper Mainshaft Washer
3/8-16 x .62" long Hex Head Cap Screw
8" Hammer
Hammer Block
Flanged Bearing
Hammer Pin
#10-24 x .25" long Flat Point Socket Hd. Cap Screw
1/2-13 x 2.50" long Hex Head Bolt
1/2 I.D. Lockwasher
Standard Motor Cord w/Plug
Motor-1/4 HP115/230V60/50Hz1 phase
Motor Adapter Plate
Sprocket – 14 Teeth (1800 rpm) with Set Screw
3/8-16 x 1.00" long Hex Head Screw
3/8 I.D. Flat Washer
Cam Gear
Cam Shoulder Screw
1/2 I.D. Shim
1/2-13 Locknut
Lift Rod
Lift Rod Coupling
5/16-24 x 1.25" long Socket Head Cap Screw
Timing Belt Pulley
3/8 I.D. x 1.50" O.D. Fender Washer
Main Shaft Key (Lower)
Timing Belt
Pedestal Cover
Dual Sieve Cover
Timer Enclosure
Electronic Timer (115v)
Electronic Timer (230v)
3 1/4" Octagon Box (Appleton # 30)
Gas Spring (Guden #CGS24-30)
Spring Stud (Guden #BS101-02)
REQ’D.
1
4
1
1
1
1
2
2
3
1
1
1
1
1
2
1
1
2
1
2
1
2
2
2
4
6
1
1 pk.
1
1
1
2
1
1
2
1
1
1
1
1
1
1
1
4
4
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
2
1
1
2
PRICE ($)
1026.15
2.70
12.25
12.25
55.05
2.35
33.65
2.75
2.00
33.65
9.35
2.70
2.70
889.35
14.10
56.10
38.55
2.65
890.15
27.80 631.05
73.10
10.85
7.30
2.00
2.00
24.75
25.50
24.35
8.50
9.35
1.95
101.50
69.90
4.95
7.90
2.70
2.70
2.00
12.25
183.75
18.25
45.45
2.70
2.70
185.90
29.20
2.75
2.00
22.20
18.25
2.00
81.65
2.00
2.75
34.80
18.25
186.90
97.35
183.75
183.75
12.25
32.85
1.95
* Items not shown
Customer Service 800.321.6188
www.wstyler.com
23
RX-812 COARSE SIEVE SHAKER PARTS DIAGRAM
24
www.wstyler.com
RX-812 COARSE SIEVE SHAKER PARTS
ITEM NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
16
17
18
20
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37*
38
PART NO.
DESCRIPTION
LC10016
LC10017
LC10008
LC10015
P-1500-23
R-10112
102542
ZA10956
LC10014
LB10266
LC10007
LB10041
LC10005
R-30018
R-40040
R-40029
R-40037
ZZ10792
LC10003
ZF10183
LB10111
ZA10148
LB10051
LB10191
LC10006
ZF10168
ZF10221
LB10201
LB10211
ZZ10801
ZZ10301
ZF10184
LC10010
LC10011
LC10009
R-10018
LC10012
Locating Pin
Clamping Knobs
Clamp Bar
Clamping Rods
Motor – 1/4 HP, 115/230V, 60/50Hz, 1 phase
Flexible Conduit Connector
Oilite Flexible Conduit – 8-1/2"
10-24 Cup Point Set Screw
Coupling
Rolok 10-24 Self Tap Screw
Shield
Special Carriage Bolt
Bearing Ring
Adapter
Timer Mounting Clip
Electronic Timer 115v Electronic Timer 230v 1/4-28 x 1-3/4" Soc. Cap Scr.
Base, Sieve Shaker
3/8"-16 x 1.00 Hex Hd. Bolt
Drive Pulley – 1-1/2" O.D.
10-24 x 3/8" Cup Point Set Scr.
Pulley/Eccentric Assembly
Flanged Stand Off Bushing
Carrying Plate
3/8" Hard Washer
3/8"-16 Lock Nut
Stand Off Bushing
Drive Belt – 2L310
1/4"-28 Black Lock Nut
1/4" Flat Washer
5/16"-18 Black Hex Hd. Bolt
12” Cover Clamping Plate
8" Cover Clamping Plate
12" to 8" Conversion Plate
110V Cord Set
Arm
* Items not shown
REQ’D.
PRICE ($)
1
2
1
2
1
2
1
4
2
6
1
1
2
1
2
1
1
2
1
3
1
1
1
1
1
1
1
2
1
2
6
2
1
1
1
1
1
4.35 28.70
54.55
18.65
183.75
11.40
2.90
2.00
18.65
1.95
56.00
2.35
14.50
18.25
N/C
183.75
183.75
1.65
141.90
2.70
20.50
2.70
24.25
23.00
204.75
2.70
2.70
6.70
60.95
2.00
2.00
2.00
78.90
51.50
53.05
12.25
7.00
NOTES: _ ________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
Customer Service 800.321.6188
www.wstyler.com
25
COMPUTERIZED PARTICLE ANALYZER (CPA) 2-1
• The HAVER TYLER CPA 2-1 is the newest member of the Photo-Optical
Particle Size and Shape Analyzers.
• The HAVER TYLER CPA 2-1 is equipped with user friendly CPA software that is
compatible with current Windows™ based operating systems.
• The unit can be operated with a desktop or laptop computer. Minimum software
requirements are 850 MHZ, 1g hard drive and 512 RAM.
• The new model has been designed for laboratory use measuring dry, free flowing,
non-agglomerating particles.
• The CPA unit is virtually maintenance free, durable, and can be used for
“in-line” process applications as well.
• The 2-1 software includes a feature that correlates CPA raw data to traditional
test sieving results.
Technical Data:
Measuring Range:
Operating Voltage:
Camera:
Light Source:
Dimensions:
Weight:
Applications:
26
www.wstyler.com
.034 mm (ASTM 400) - 25 mm (ASTM 1” OPG)
230 v/50 Hz
120 v/60 Hz
CCD - Line Camera
LED
33” x 11” x 23”
36 lbs.
sand, coal, sugar, salt, plastics, fertilizer, ceramics, glass,
foods, pharmaceuticals and other industrial materials
Customer Service 800.321.6188
W.S. Tyler Certified, Certified Plus and Matched Test Sieves are examined to meet ASTM and ISO specifications.
The openings of the sieves are measured with a computerized video imaging system. Products are then serialized and supplied with NIST traceable documents, including statistical information on opening sizes and wire
diameters.
Shown here is a typical Document of Certification and descriptions of the terms used.
A
Dimension Reference Number
1 = Wire Diameter “x” direction
2 = Aperture Size “x” direction
3 = Wire Diameter “y” direction
4 = Aperture Size “y” direction
B Sample Size* = Number of apertures or
wire diameters measured
C Upper Spec. = Aperture size per ASTM
E11 specification, plus tolerance
D Lower Spec. = Aperture size per ASTM
E11 specification, minus tolerance
E Nominal = Specified aperture
size, per ASTM E11 specification
F Standard Deviation = A numerical
value that measures “spreading”
tendency, a deviation of the values from their mean (average)
G Max. Measured = The largest
aperture or wire diameter measured
B
C
D
E
F
G
H
I
J
M
A
L
K
H Min. Measured = The smallest
aperture or wire diameter measured
I Range = The difference between the
“max” and “min” above (rounded)
J Mean = Average aperture size or wire
diameter measured
K Description = Test sieve designation/
mesh size
L Serial No. = Identification number of
test sieves
M Histogram = Graphic presentation of
values measured vs. corresponding
number of apertures examined
Customer Service 800.321.6188
Laboratory Services Pages 12 and 13
www.wstyler.com
27
W.S. TYLER
®
Industrial Group
8570 Tyler Boulevard
Mentor, OH U.S.A. 44060
ISO 9001: 2008 REGISTERED
Telephone:
800-321-6188
Local:
440-974-1047
Fax:
440-974-0921
E-Mail: [email protected]
Website:
www.wstyler.com
Particle Analysis
Test Sieves
Ro-Tap® Shakers
CPA Size & Shape Particle Analyzer
Engineered Products
Custom Metallic Filtration Products
Porostar Sintered Laminates
Plastic Extrusion Screens
Industrial Screening Products
Industrial Woven Wire Cloth
Cut to Size Pieces or Rolls
Architectural Design Wire Cloth
Project Capabilities
IMAGIC WEAVE - Media Screens
AIA /CES Registered Provider
www.weavingideas.net
Quality • Service • Value
© 2014 W.S. Tyler

Download Report