East of England
Fabrication Directory
2014
East of England
Fabrication
Directory 2014
The East of England is unique in the country as it includes energy producers
across a diverse range including nuclear, gas and renewables and is key to
UK PLC in terms of keeping the nations power turned on. Our vibrant supply
chain includes a number of fabricators many of whom have specialist skills,
equipment and resources built over the last 50 years of the regions energy
history. The East of England Energy Group (EEEGR) is a trade organisation with
some 400 members and is active in finding opportunities for its members,
organising events, working with government at local, regional and national
level and engaging with industry to ensure we have the requisite skills and
training to ensure the growth of the sector into the future.
During the course of 2013 EEEGR worked with DECC to identify the fabricators
in the East of England and in this first edition of this fabricators guide we
believe we have showcased some of the capabilities and resources that are
available in our region. Often thought of as an area of agriculture and tourism
readers might be surprised at the breadth and depth of capabilities we have in
the East of England indeed the area has recently been identified by colleagues
in the renewables sector with the recognition of CORE (Centres of Offshore
Renewable Engineering) status one of just six such areas in the country.
Many of our fabricators have access to the North Sea through our ports with
excellent quayside facilities as well as some of the world’s leading technology,
research and development (R&D) and engineering excellence. In short our
region has the land, infrastructure, skills and supply chain expertise required
to take advantage of the world’s largest energy engineering and fabrication
requirements.
Contacts
Simon Gray
Chief Executive
East of England Energy Group
Email: [email protected]
Tel: 01493 446535
Web: www.eeegr.com
This publication is compiled by East of England Energy Group and supported
by the Department of Energy and Climate Change.
Simon Gray
Contents
AKD2
Armultra4
Bartech Marine Engineering6
BFS Enterprise (Fabrications) Ltd8
CLS Offshore10
Code-A-Weld (Great Yarmouth) Limited
12
Derrick Services UK Limited14
Eng-Tech 16
J&M Edward Precision Engineers Limited 18
KSD Fabrications20
Kiss Works Ltd22
Landguard Engineering24
Lobec26
Moughton Engineering Services28
Morgan Cooper30
Pruce Newman32
Ro-Co Engineering Services Limited 34
Round House Limited36
S&G Fabrications 38
Sailspar Ltd 40
Stanref International42
Steel Services44
Sembmarine SLP46
Warren Services48
Other Fabrication Facilities50
Port Information
Wells-next-the-Sea 52
Great Yarmouth 53
Lowestoft 54
Ipswich 55
Harwich 56
1
AKD
Main Contact
Email
Telephone
Company Description
Denise Farr
[email protected]
01502 527 800
Address
Horn Hill, Lowestoft, Suffolk,
NR33 0PX
Website
www.akd-engineering.co.uk
Expertise
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
9 Acres
Combination of covered, laydown and dockside
5000 m2
5000 m2
500 T
Job dependant
- Approved
subcontractors for
heavy lift
4.2m
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
2
AKD Engineering Ltd offers an Engineering, Manufacturing and
Offshore Service which is second to none for long term supply
partnerships. Dedicated to providing cost effective, top quality,
medium to heavy fabrication, machining and assembly services
to a wide range of industries. Since 1955, AKD Engineering is
a name to depend on. AKD’s largest modern fabrication shops
spans some 4000 M², handling shop fabrications up to 100
tonnes. Also we have a dedicated clean fabrication shop for
projects constructed from high nickel alloy materials. In addition,
adjacent open air quayside fabrications up to 500 tonnes can be
manufactured for direct load out onto vessels.
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Pressure Testing
Design, Drafting, Machining, Fabrication, Project Management
Onshore/Offshore, Decommissioning.
Standards & Accreditations
AKD prides itself on its high integrity welding capabilities,
and has specialist skills in welding materials including carbon
steels, stainless steel, duplex, super duplex and other exotic
alloys. Welding procedures are qualified to AWS D1.1, EEMUA,
ASME 1X, NORSOK, and BS EN 15614-1, BS4515 pt.1 & 2
and ES 124/106 standards utilising a wide range of industrial
welding techniques for complex structures, pressure vessels and
piping. AKD are at the forefront of welding technology with an
extensive library of welding procedures supported by a team
of highly qualified welders working an all types of welding
processes including MMA, FCAW, TIG and SAW.
Company Facilities - Equipment
AKD has a mobile crane, 12T Forklift, 2 x 3T Forklift, 4T
Forklift, Mobile Elevated Working Platform, Pressure testing
and profile cutting. 7 x Bandsaw, Pipe Prepper x 2, Kingsland
Press, Welding MMA MIG TIG Saw, Overhead Cranes in
workshops up to 20T single lift, Clean workshop for stainless
duplex and titanium, Full machine shop CNC milling Turning,
Manual Milling turning, drilling boring facilities, dry stores and
offsite secure storage.
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
No
No
Yes
No
Yes
Yes
Structural
Standard
Vessels
Standard
Pipework
Standard
Yes
EMMUA NNSBC
Yes
PD5500
Yes
NORSOK ASME API AWS DNV EMMUA DEP
NACE 4515
No
Yes
Other
Standard
Plans for development of new facilities
• UK Regional bases
• Dockside facilities
Plans for development of new services:
• CNC 5 Axis machines
• Products
NDT, Coating, Galvanising
and mechanical testing
Number of employees that may be recruited
• 50+
Project Experience in Oil and Gas Year
2013 - Current
2013- 2014
2012 - Ongoing
2013-2014
2012-2013
2011
AKD Fabrication
Project Details
Bacton Rejuvenation Structual & Pipework
Process Skid Packages
Subsea Structures
High End Integrity Machining
Pipe work
High Pressure subsea Risers & Connections
Client
Shell
Cyclotech
Aker Solutions
GE Oil & Gas
AJS
SRP
Contract Value (GBP)
Not Discolosed
Not Discolosed
Not Discolosed
Not Discolosed
Not Discolosed
Not Discolosed
AKD Fabrication Pipework
3
Armultra
Main Contact
Email
Telephone
Address
Website
Company Description
Tony Grier
[email protected]
01493 652150
Armultra House, Hewett Road,
Gapton Hall Industrial Estate,
Great Yarmouth, Norfolk,
NR31 0RB
www.armultra.co.uk/
Armultra Ltd have two workshops where goods are fabricated
to client specifications. We have skilled staff capable of fitting
the items and a team of staff ready to work offshore at client’s
requests. We have experience in mild, stainless and exotic steels.
The company has triple ISO accreditation in manufacture, health
and safety and environmental areas.
Expertise
General fabrication, structural steelwork such as towers,
mezzanine floors ect , pipe work, tanks, pressure vessels. We have experience in duplex and super-duplex material grades.
Standards & Accreditations
ISO 9001, ISO 12001, ISO 18001
Company Facilities
Company Facilities - Equipment
4 Acres
22,500 sq ft
22,500 sq ft
7500 sq ft
The factory has two internal cranes. For larger lifts mobile
cranes are hired in. The company has CNC punch , press and
guillotines as well as all of the equipment associated with a
welding and fabrication company.
Max. Water Depth (m)
Min. Water Depth (m)
Other
Not Applicable
Not Applicable
Services Offered
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
Yes
Yes
Yes
No
No
No
No
Yes
No
No
No
No
Yes
No
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
4
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
No
Yes
Yes
Yes
No
Yes
No
No
No
Yes
No
No
Yes
No
Yes
Yes
Plans for development of new facilities
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
No
N/A
Yes
PD5500, ASME VIII, PED, Stoomwezen, AD
Merkblatter
Yes
BS-EN ISO 15614-1: 2004, BS-EN 288, ASME IX,
ASME B31.3, B31.5 and Electro fusion welding on PU
and PE pipe work.
Yes
We have in excess of 90 welding procedures covering
carbon steels, stainless steels, duplex / monel's etc. we
also have welding procedures and experience in the
use of CuNi 90/10, titanium and other exotic materials
Our site was extensively redeveloped in 2007 as part
of our drive to achieve ISO accreditation.
Plans for development of new services:
We plan to extend our offshore capabilities and widen
the trades we offer our clients
Number of employees that may be
recruited
25
Project Experience in Oil and Gas Year
2013
2013
2012
2012
2012
2011
2011
2011
Project Details
Works on Breagh A rig
Works on Clipper South rig
Fabrication of stairtowers/platforms
Fabrication of mud/gas separators
Fabrication of chemical injection plant
Unbalanced drill pack
Sewage tanks plus multi vessel pack skid
Habitation quarters on rig
Client
ODE
ODE
Tyco
Weatherford
Tyco
Weatherford
Expro (Angola)
Maersk Norge
Contract Value (GBP)
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Slot Drilling Template
Buzzard Field Project
5
Bartech Marine Engineering
Main Contact
Email
Telephone
Address
Website
Company Description
Harry Morgan
[email protected]
01206 791552
Units D, E & F,
Chandlers Row, Colchester, Essex,
CO1 2HG
www.bartechmarine.com
Bartech Marine Engineering has been building a strong
reputation for reliability and quality since it was formed in
1987. Almost immediately it began supporting major offshore
companies and the OEM, Paxman Diesels.
This reputation has been built on our core belief of supporting
clients with mechanical excellence, responsiveness and integrity.
We will always look to provide the best long term solution for
our clients and develop a longstanding relationship.
Bartech Marine Engineering has a strong team with varied
specialised backgrounds including OEM training, CMM,
machining, project management, quality, logistics, IT and
administration which equips us to respond effectively and in
a cost efficient way to your specific requirements. These inhouse skills are backed by the core company values reinforced
by family ownership.
Expertise
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
6
18,000 sq ft
12,000 sq ft
18,000 sq ft
6,000 sq ft
2 x 3.2T
n/a
n/a
No
Yes
Yes
No
No
No
No
Yes
No
No
No
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
No
No
Yes
Bartech Marine Engineering is a specialist in the reengineering
and manufacture of mechanical parts and assemblies, with
particular expertise in engine and marine applications. We
will oversee the manufacture of components including CAD
drawings, castings, machining, milling, boring, honing, grinding,
splining, hardening final test and inspection. We are the only
service dealers for MTU engines in East Anglia and we also have
a partnership agreement with Mobil.
Standards & Accreditations
At Bartech, all our work is performed to the highest standards,
and is backed up with our warranty. When work is completed,
a full report is written and will be available either via email
or through our customer portal. We work with some major
companies and organisations around the world, meeting the
high standards they demand. We are FPAL registered and ISO
9001 approved.
Company Facilities - Equipment
HAAS SL10 CNC Lathe
HAAS Servobar 3000 Bar Feeder
HAAS TL2 CNC Lathe
HAAS Vertival Mill
Water Test Facilities
Injector Test Facilities
2 x Governor Test Rigs
2 x 3.2T Cranes
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Yes
No
Yes
No
Yes
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Supply of skilled
labour to work
offshore.
Plans for development of new facilities
Bartech moved premises in August 2013 as part of
the company’s continuous expansion giving a 500%
increase in square footage. We have invested heavily
in new equipment including IT infrastructure to reduce
downtime, 3 over head gantry cranes and a new
washer.
Third Party
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
No
n/a
No
n/a
Yes
In compliance with SOLAS Regulations
Reengineering and manufacture of mechanical spares
Plans for development of new services:
Not provided
Number of employees that may be
recruited
5-10
Project Experience in Oil and Gas Year
1987
2007
2009
2009
2010
2010
2011
2011
2011
2011
2012
2012
2012
2013
2013
2013
Project Details
Support 2 largest oil companies with Paxman
engines
Support for Ruston 12RKC engine
Supply and Install Paxman 12YJ engine
Offshore overhaul of CAT 3516 engine
Support offshore of CAT engines and lifeboats
Complete overhaul of 12YH engine
Offshore support of Cummins, Detroit and
Wartsilla engines
Overhaul Waukesha engine
Support Wartsilla engine
Feasibility study for installation of diesel generator
Overhaul Paxman 12YH engine and upgrade panel
Supply CAT engine and enclosure
Overhaul Ruston 12RKC engine
Supply and install Dorman 12QT short engine and
assemblies
Support Paxman 12RP200 engine
Overhaul 2nd Ruston 12RKC engine
Client
Not provided
Contract Value (GBP)
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
7
BFS Enterprise (Fabrications) Ltd
Main Contact
Email
Telephone
Company Description
Martin Spence
[email protected]
01502 716383
Address
Colonial House, Anson Way
Beccles Business Park NR34 7TL
Website
www.bfs-fabs.com
BFS Enterprise (Fabrications) Ltd has been established since
May 1979 and initially manufactured propeller nozzles for export,
and to provide a pool of skilled labour to service the off-shore
industry on the East Anglian coast. We provide heavy steel
fabrication services to Oil and Gas sectors, Petrochemical
industries, Renewable, Marine, Industrial & water.
Expertise
In house heavy plant and equipment to enable 1 stop shop
fabrication with total in house control.
Standards & Accreditations
ISO 9001:2008 Third party approved Quality Management
System.
Company Facilities
8
Company Facilities - Equipment
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
2 Acres
4,000 sq ft
20,000 sq ft
0.5 Acres
7T
50 T
Not Applicable
Not Applicable
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
No
Yes
No
No
No
No
No
No
Yes
No
No
No
Yes
No
No
400 tonne hydraulic press brake, 3M x 660mm OlD x 2Smm
thick plate rolls, Oxy fuel Plate profiling machine, Cold saw,
Radial drilling to 60mm diameter, Hydraulic test equipment
to lS,OOOpsi, 5te Welding rotators, 2 x 3te welding
manipulators, Rigid cutting and threading to 4" diameter, 7te
Iron Fairy mobile crane, 2 x 3.Ste Linde fork trucks, 6 x 1te
Demag static jib cranes, Hydraulic pipe bending facilities to 4"
diameter, 7 x 400 amp programmable MIG welding plants, 2
x high frequency TIG welding plants, Portable straight line Oxy
fuel cutters, Ceramic mats and rectifier for application of pre
heat prior to welding
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
No
No
Yes
Yes
No
Yes
No
No
No
Yes
No
No
No
Yes
No
No
Non Destructive testing's,
design work, Surface
treatment including
painting & shot blasting
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
EEMUA 158/197, AWS D1.1, ASME, BS EN ISO
15614-1:2004 + A1:2008. NSSSBC
No
No
No
Project Experience in Oil and Gas Year
Not provided
Not provided
Not provided
2010
2012
2007
2009
Project Details
Conoco Hook up
BP Schiehallion FPSO Project
Shell Service Contract
Greater Gabbard wind farm
Bacton rejuvenation project
Drilling templates
Trawlable subsea structures
Client
ConocoPhillips
BP
AJS
Fluor
JLES
UWG
CES
Contract Value (GBP)
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
9
CLS Offshore
Main Contact
Email
Telephone
Simon Thorne
[email protected]
01493 668730
Addresses 1
Maltings House, Malthouse Lane,
Gorleston, Norfolk, NR31 0GY
Addresses 2
1 Berry Street, Aberdeen, AN25 1HF
Addresses 3
Marfleet Environmental Industries
Park, Hedon Road, Kingston upon
Hull, East Yorkshire, HU9 5N
Website
www.clsoffshore.com
Company Facilities
Total Area
Assembly Area
1600 m2
Split between covered Area &
Construction slab
Covered Area
2750 m2
Storage Area
3000 m2
Load Out Capacity
6250m2 construction slab with
2500T load out capacity, 100m
Quayside 6m water depth
Max. Lift (T)
Overhead 2 x 5 T cranes 2 x 10 T
cranes
Max. Water Depth (m)
6m
Min. Water Depth (m)
5.1m
Other
Quayside- 200m waterfront
length with a capacity of 500Te
berthing
Open Fabrication Area
Yes
Covered Fabrication Area Yes
Warehouse and Storage
Yes
Environmentally controlled Yes
storage
Sea frontage
Yes
River Frontage
Yes
Dry Dock
No
Office
Yes
Lay Down Area
Yes
Accommodation Space
Yes
Quayside storage
Yes
Paint Shop
No
Engineering workshop
Yes
Electrical workshop
Yes
Joiners workshop
No
Shotblast enclosure
No
Mechanical Workshop
Yes
Segregated facilities
Yes
Load testing facilities
Yes
Mechanical testing
Yes
Mobile Workshops
No
Carbon steel workshop
Yes
Dedicated Stainless steel
Yes
workshop
Machine shop
No
Other
10
Company Description
We deliver fast and efficient total solution from engineering,
project management through to fabrication and installation,
both offshore and onshore to major clients around the globe.
On and Offshore Oil and Gas fabrication company capable of
total turnkey projects, Specialist in rope access services, wind
turbine support services and mechanical/electrical.
CLS has steady year on year growth and developed excellent
credited relationships with major blue chip companies. The
company welcomes new opportunities and is willing to
carry out a level of investment to maintain future growth to
accommodate the customer need.
Expertise
Offshore Decommissioning (platforms and derricks) and Asset
Integrity, for which has been a major part of the business, we are
capable of any project offshore no matter how large or small.
In addition, we provide the following: Hookups, Rope Access
Solutions, Derrick Solutions, Resource Supply and Solutions,
Electrical, Mechanical & Instrumentation Commissioning, Wind
Turbine Installation, Brownfield Modifications.
Standards & Accreditations
BSI ISO 9001 accredited and PED Module D, held since
November 2002. CLS have received numerous prestigious
industry Awards, including British Safety Council Awards for the
last nine years and CLS implements BSI accredited ISO 14001
for our Environmental Management System, since January 2009
and OHSAS 18001 for Safety Management, September 2011.
CLS have been a Full Operating Member of IRATA since 2006.
Company Facilities - Equipment
The fabrication shops (Carbon Steel and separate exotics work
shop) are well equipped for fabrication work and with in-house
profiling; a wide range of projects can be easily undertaken.
From our 2160m ² quayside fabrication workshop complete
with 2x10T and 2 x 5T overhead cranes we carry out all our
fabrication activities. We utilise 1 workshop for all structural
fabrication and the remaining workshop specially sectioned
for exotic contamination free pipe work.
Our external Construction / Storage Slab of 2830m² is rated
to accommodate minimum 500 tonnes and has the benefit of
an associated vessel berthing with draft depth of minimum 6
metres allowing vessel load out directly to the North Sea.
Plans for development of new facilities
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Quay load outs. Hyfro
testing, offshore training,
transport fleet HGV1 &2
Scaffolding, pipe coating,
grit blasting, field joint
coating, metal casting
Purchasing the premises in 2013 has allowed for additional laydown
and fabrication facilities (2400m3) to be developed .Expansion of
Exotic/Stainless Steel fabrication facilities by a further 2000m2.
Internal departments expanded by 25% to develop the personnel
provision as a major growth on supply and training. ECITB Training
& Competency to develop trade skills further.
Further commercial development by bringing in key organisations
for joint projects.
Plans for development of new services:
Further Project Management expansion to provide key skills in
existing contracts and as an outsourcing option linking into the
HR/Personnel development. A significant increase in the E&I/
Mechanical commissioning work is expected also.
Number of employees that may be recruited
100+
Types of Fabrication Offered, and standards or specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
EEMUA 158 & 197, ASME B313
Yes
EEMUA 158 & 197, ASME B313
Yes
Carbon Steel, Low Temp Carbon Steel, Duplex, Super Duplex & Kunifer
Yes
WELDING to Standards – BS EN 287, ASME IX, & AWS D1.1
Project Experience in Oil and Gas Year
2012-2013
Project Details
York – Tie in/Hook up & Commissioning
Client
Centrica
Contract Value (GBP)
2500000
2011-2012
2011-2012
2011-2012
2010
2013
2011
2009-2012
Symbiosis – Bacton (Rerouting of LAPPS/HEWITT Inlets
Utilities Replacement Pipework
Supply of OIM/AIPO personnel
Kittiwake Derrick Decommissioning
Subsea Tie In Spools/Riser Clamps
23C Asset Integrity – Decommissioning 600T
Various Derrick Refurbishment/Replacement
York – Tie in/Hook up & Commissioning
Petrofac
Shell – AJS
Amec
Shell
Bibby
Perenco
TAQA/BF/PDMS
3000000
850000
1500000
1250000
1500000
2500000
Up to £3,000,000 PA
Fabrication Facility Shop
BP Project
11
Code-A-Weld (Great Yarmouth) Limited
Main Contact
Email
Telephone
Company Description
Geoff Simon
[email protected]
01493 602844
Address
Units 5-10 Bessemer Way, Harfreys
Industrial Estate, Norfolk, NR31 0LX
Website
http://www.codeaweld.co.uk
Formed in 1978, the Company is privately owned and services
the Petro-chemical, Construction and Food Processing Industries.
Expertise
Fabrication of structural deck sections, access platforms, high quality
pipe-work, pressure vessels and compressor packages
Standards & Accreditations
Lloyds Register Quality Assurance to BS EN ISO 9001:2008, FPAL
Verification, Welders coded to ASME IX (American Society of
Mechanical Engineers)
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
12
58,000 sq ft
32,300 sq ft
30,000 sq ft
2,300 sq ft
2 x 5 T Overhead Crane
Not Applicable
Not Applicable
Yes
Yes
No
No
No
No
No
Yes
Yes
No
No
No
Yes
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Pressure Testing
Company Facilities - Equipment
5 tonne Overhead Crane (x2), Guillotines (x2), 100 tonne
Press Brake, Punches, Drilling Machines, Lathes (x2), Milling
Machines (x2), Multi-head Profile Cutter (230mm max plate),
Rollers, Fabrication Manipulator
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
No
No
No
Yes
No
Yes
No
No
No
No
No
No
No
No
No
No
Non Destructive Testing,
Heat Treatment, Pressure
Testing, Surface Coating,
Load Testing
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
EEMUA, NSSBC, DNV, BS
Yes
ASME, PD5500
Yes
ASME
Plans for development of new facilities
None proposed
Plans for development of new services:
Ongoing
Number of employees that may be
recruited
Will fluctuate depending on workload
Project Experience in Oil and Gas Year
Not provided
Project Details
Leman AD1 Platform Jacket Repair
Client
AJS / Shell
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Dong Project
Weld Access Platforms (Kelvin Platform)
Duplex Condensate Spools
Diver Decompression Chambers
Base Module, Grillage and Pancake for Drilling Tower
Control Cabin Skids and Frames
Caltec
SLP Engineering
ConocoPhillips
Sub Sea Services
BJ Services
HydraRig NOV
Contract Value (GBP)
ODE Oily Water Seperator
Hydramec Offshore Hydraulic Systems - ROV Launch & Recovery System
FoundOcean - PC Pump Frames
13
Derrick Services UK Limited
Main Contact
Email
Telephone
Company Description
Neil Winney
[email protected]
01493 669141
Address
Falcongate House, Faraday Road,
Harfreys Ind Estate,
Great Yarmouth, NR31 0NF
Website
www.derricksl.com
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
14
6500 m2
2000 m2
15920 m2
5T
5T
Not Applicable
Not Applicable
Yes
Yes
Yes
No
No
No
No
Yes
Yes
No
No
No
Yes
No
No
No
Yes
Yes
No
No
No
Yes
Yes
No
Training Facility
DSL (Derrick Services (UK) Limited) is a specialist company
providing a service to Operators, Drilling Contractors,
Major Contractors and Shipyards within the oil and gas
industries. Services include the design, engineering, project
management, manufacture, repair, up-grade, installation,
refurbishment, and decommissioning of drilling structures
and associated drilling equipment as well as general
structural and piping fabrication work. API compliant
inspections and surveys of offshore and onshore drilling
structures complement the total scope of services offered to
DSL customers on a global basis. The success of DSL is based
on a strong work ethic and a priority to retain and build
on our relationship with all customers through engineering
integrity, quality of product & service, a safety first attitude,
speed of response and total flexibility in what we do. With
year on year growth and increasing profitable revenue,
we are committed to reinvestment in product and service
development and new global offices to continue supplying
the industry on a larger scale and in new territories. With
headquarters established in Great Yarmouth (UK) other
operational bases are now strategically located in Aberdeen;
Macaé-Rj; Houston, Singapore; Dubai, India, and Indonesia.
Expertise
API certified drilling structure design and manufacture,
engineering design analysis, drafting, project management,
general fabrication provision for top side and subsea structures,
skilled offshore personnel including API trained Derrick
Technicians, Rope Access at all levels, Inspectors and MultiDisciplined Technicians covering all trades. Onshore and
Offshore asset integrity management and decommissioning
projects undertaken, be it large or small.
Standards & Accreditations
• API 4F MONOGRAM LICENCE FOR DRILLING STRUCTURES
• API 8C – MONOGRAM LICENCE FOR HOISTING EQUIPMENT
• ISO 9001:2008
• API Q1: 9TH EDITION 2013
• ISO/TS 2900
• API CERTIFIED DERRICK INSPECTOR TRAINING COURSE
• API CERTIFIED & IADC ACCREDITED DERRICK TECHNICIAN
TRAINING COURSE
• IADC & API APPROVED TRAINING PROVIDER
• OPITO & IADC ACCREDITED COMPETENCY MANAGEMENT
SYSTEM
• IRATA CERTIFIED FULL MEMBER
• FPAL / ACHILLES REGISTERED SUPPLIER
• DROPS (Dropped Objects Prevention Scheme) ACTIVE
MEMBER
• LEEA (Lifting Equipment Engineers Association) MEMBER
Company Facilities - Equipment
Two separate workshops and two large storage & lay down areas.
Workshops consist of a wide range of general and specialist fabrication
equipment including; profiler, various types of welding equipment, hand
and power tools, mechanical saws, cranes, fork trucks.
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
No
Yes
No
Yes
No
Yes
No
No
No
No
No
No
Yes
No
Yes
Yes
API certified training courses
Coatings, galvanising,
pressure testing, load
testing, NDT, heat
treatment, machining
Vessels
Standard
Pipework
Standard
Other
Standard
Subsea Drilling Template
Plans for development of new facilities
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Fabrication & Upgrade for Middle East Land Rig
In the process of moving into bigger facilities in
Singapore which include a fabrication workshop.
Yes
API 4F, API 8C, AWS D1.1, EEMUA 158 & 197,
ASME B313
No
N/A
Yes
ASME B313, Carbon Steel, Low Temp Carbon Steel
Yes
ASME IX, multiple welding procedures covering all
levels of work we undertake
Project Experience in Oil and Gas Year
2012
2012
2012
2013
2014
2014
Project Details
Derrick and Substructure Decommissioning
Trial Erection and Installation of Turbine Exhaust
Stack
Iron Derrickman Installation, Design, Engineering
Analysis and Installation
Derrick Removal and Reinstallation
Iron Derrickman Installation, Design, Engineering
Analysis, Manufacture and Installation
Drilling Derrick Low Temperature Protection,
Engineering Analysis, Manufacture and Installation
Client
Talisman
Wood Group PSN
Contract Value (GBP)
Not provided
Not provided
Weatherford –
Transocean
Primepoint
Weatherford – Ensco
Not provided
Not provided
Not provided
Noble
Not provided
15
Eng-Tech
Main Contact
Email
Telephone
Address
Website
Company Description
Peter Palmer
[email protected]
01502 515768
Unit 5, Harbour Road Industrial
Estate, Oulton Broad, Lowestoft,
Suffolk NR32 3LZ
www.eng-tech.co.uk
Eng-Tech has supplied sub-contract fabrication & machining
services primarily for the Offshore Oil & Gas sector for the last
12 years. But has an established skilled workforce with over 25
years of experience operating from our Lowestoft base.
Expertise
Fabrication of skids & containers to DNV 27-1. Tong handling /
back-up and specialized pipe handling equipment. Fabricated
centralisers & equipment.
Standards & Accreditations
ISO 9002:2008 (8002) Quality management, Health & Safety
integrated with Quality system, Welders coded to AWS D1.1
2010
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Company Facilities - Equipment
600 m2
100 m2
400 m2
100 m2
Max. Lift (T)
16
Max. Water Depth (m)
Min. Water Depth (m)
Other
Not Applicable
Not Applicable
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
No
Yes
No
No
No
No
No
Yes
No
No
No
No
Yes
No
No
No
Yes
No
No
No
No
Yes
No
Yes
CNC & manual Machines / large capacity lathe, 5 ton Forklift
on site / Crane hire facilitated in yard area. 3 x Esab Origomig
programmable welding sets and Controlled consumable
storage.
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
No
Yes
No
No
Yes
No
No
No
Yes
No
No
No
No
No
Yes
No
No
Plans for development of new facilities
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
DNV 27-1 / AWS D1.1 2010/ISO 15614-EN 287 /ASME
IX
No
No
RQT / Dissimilar/ Aluminium
ASME IX /General
Erection of new Workshop in yard area planned
Plans for development of new services:
New Haas VF3 VMC (CNC Mill) March 2014
Number of employees that may be
recruited
2
Project Experience in Oil and Gas Year
2013
2012-2013
2012
2010-2012
2008-2012
2010-2011
Project Details
Tong Handling System Fabrications
EPU Skid Fabrications
Winch Fabs / machined items
Low Temperature Skid Fabrications
Titanium & Aluminium Subsea enclosures
Hammer PU Skid Fabrications
Client
Paramode / Franks
Paramode / Franks
Gardline Scientific
Weatherford UK
OceanTools
Paramode / Franks
Contract Value (GBP)
35K
200K
25K
25K - 50K
150K
130K
Subsea Display Unit
HPC Pot (Vibrocorer)
17
J&M Edwards Precision Engineers Limited
Main Contact
Email
Telephone
Address
Website
18
Company Description
Graham Edwards
[email protected]
01493 604312
Lefevre Way, Gapton Hall Industrial
Estate, Great Yarmouth,
NR31 0NW
www.jmedwards.co.uk
J&M Edwards specialises in sheet metal work, light fabrications
and precision engineering. Using the latest technology J&M
have the skills and experience to produce quality sheet metal
and machined components.
Expertise
Fabrication and precision engineering under one roof. High
quality fabrication by highly skilled tradesmen. Specialists in
Stainless and Aluminium.
Company Facilities
Company Facilities - Equipment
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
Fully equipped Fabrication Shop and Machine Shop. We have
good relationships with the providers of everything from laser
cutting to painting.
535m2
2.5 T
2.5 T
Not Applicable
Not Applicable
Yes
Yes
No
No
No
No
No
Yes
No
No
No
No
Yes
No
No
No
Yes
No
No
No
No
Yes
No
Yes
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
No
No
No
No
Yes
No
Yes
No
Yes
No
No
No
No
No
No
Yes
No
No
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
No
No
No
Yes
Supporting certification provided coded welding
Project Experience in Oil and Gas Year
1971 - 2014
Project Details
High percentage of our output over the years has
been for the Oil and Gas industry
Client
Contract Value (GBP)
19
KSD Fabrications
Main Contact
Email
Telephone
Company Description
Keith Goate
[email protected]
01493 445355
Address
Ventureforth Business Park, Unit
E, Suffolk Road, Great Yarmouth,
Norfolk, NR31 0ER
Website
www.ksdfabrication.co.uk/
KSD (Fabrication) has been formed by highly skilled and
experienced fabricators from the Oil & Gas Industry. Their skills,
experience and qualifications combine to provide a high level of
expertise in all aspects of the fabrication industry. This distinctive
background is coupled with the company’s vision of utilising
industrious teamwork, knowledge and experience to provide
outstanding fabrication. We offer reliable and effective support
for any onshore/offshore project or operation
Expertise
Offers a wide range of fabrication expertise, from access platforms,
walkways, skid modules and all types of pipework for Oil and
Gas industry. Fabricated to ISO 9001:2008 accreditation and fully
documented by QA and Control system. Both directors hold
combined expertise of 80 years in this field.
Standards & Accreditations
Company Facilities
20
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
2 Acres
Yes
Yes
Yes
50 Tonnes
50 Tonnes
Not Applicable
Not Applicable
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
No
Yes
No
No
No
No
No
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
ISO 9001:2008 (8002) Quality management, Health & Safety
integrated with Quality system
Company Facilities - Equipment
2 Forklifts, saw, welding plant, dedicated welding bays,
MIG TIG & STICK
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
No
No
No
Yes
Yes
No
No
No
No
No
No
No
No
Yes
No
No
No
Plans for development of new facilities
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
KSD have taken occupancy of new larger premises at
the end of 2013.
Yes
ASME b31.3 / AWS D1.1
Yes
ES 180
Yes
BS-EN 12079: 1999
Yes
We are able to run weld procedure for any of the
above
Plans for development of new services:
None Provided
Number of employees that may be
recruited
Maximum 20+
Project Experience in Oil and Gas Year
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Project Details
Fabrication & installation of risers, various clamp
size in connection with subsea pool
Fabrication & installation of new well slot
Fabricating pipework and associated support to
major structures
Site maintenance, shut down, pipework and
structural fabrication
Pipe spools, supports, hand rails and grating
panels
Refurbishment of bridges and stair towers, load
testing and recoating pipework
Large pipe fabrication with NDE, hydro testing
through to painting.
Series of 11 Ton net weight jointing and
districution containers
Fabrication of process and utility pipework and
structural steel projects
Client
Aquaterra Energy Ltd
Contract Value (GBP)
Not provided
Tullow Oil
Perenco UK
Not provided
Not provided
Petrofac/Tullow Oil
Not provided
Exxon Mobil
Not provided
Tyco
Not provided
Marathon Oil
Not provided
Global Marine
Not provided
AMEC
Not provided
21
Kiss Works Ltd
Main Contact
Email
Telephone
Address
Website
Company Description
Stephen Chadd
[email protected]
01328 712153
Unit 6, North Creake Airfield
Business Park, Wells Road, Bunker
Hill. Walsingham, Norfolk,
NR22 6BD
www.kissworks.co.uk
Marine Engineering and fabrication, wind farm engineering
support, vessel maintenance and repair.
Expertise
Marine related fabrication and vessel repair
Standards & Accreditations
Weld coding as required
Company Facilities - Equipment
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
22
1,842 m2
1,423 m2
418 m2
80 m2
4.5 T
Not Applicable
Not Applicable
Yes
Yes
No
No
No
No
No
Yes
Yes
No
No
Yes
Yes
No
No
No
Yes
No
No
No
No
No
No
Yes
Turning, Milling, Plasma cutting, Gas cutting, Guillotine,
Overhead gantry, Fork lift.
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
No
No
No
Yes
Yes
No
Ship / vessel repair
Composite fabrication
and repair
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
As required
Yes
As required
Yes
As required
Aluminium and stainless steel fabrication
As required
Plans for development of new facilities
Relocating to quayside development in Great
Yarmouth
Plans for development of new services:
Wind turbine maintenance / specialist workshops
vessel lift out facility
Number of employees that may be
recruited
15+
23
Landguard Engineering
Main Contact
Email
Telephone
Company Description
Robert Day
[email protected]
+44(0)1255 552940
Address
Unit 1, Riverside Close,
Iconfield Park, Harwich, Essex
CO12 4EN
Website
www.landguardengineering.co.uk
Landguard Engineering are general Marine and Construction
Engineers that specialise in fabricating bespoke products for the
construction industry and marine industries. The company offers
the provision of bespoke steel fabrications for the construction
and offshore wind farm industries to customer requirements
including the project management of design services
Manufacture and installation, together with the contract supply
of skilled manpower for offshore maintenance.
Expertise
We can provide exactly the same service to the oil and gas
industry as we offer to the marine and renewable energy sectors.
We can fabricate bespoke steel, aluminum and stainless steel
specialist components to a very high standard.
Standards & Accreditations
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
24
46,000 sq ft
20,000 sq ft
6,000 sq ft
20,000 sq ft
50 T
200 T
13m LAT
9.5m LAT
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
The company operates a quality assurance system to ISO 9001
standards and is currently being accredited by Lloyds Register
Quality Assurance and intends to work towards OHAS 18001
and ISO 14001 certification.
Company Facilities - Equipment
We have access to 2 x 35t portal cranes allows for 50t lift at 14
meters from the quayside and can hire in larger cranes for big
lifts. We have all normal fabrication shop tooling together
with mobile workshops.
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Supply of skilled
labour to work
offshore.
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
Works can be carried out to DNV , ABS, Lloyds and
other class approval standards
Yes
Works can be carried out to DNV , ABS, Lloyds and
other class approval standards
Yes
Works can be carried out to DNV , ABS, Lloyds and
other class approval standards
Plans for development of new facilities
In addition to its current ability to mobilise large vessels
the company is in the advanced stages of being able to
offer a berthing and onsite repair facility for small wind
farm support vessels
Plans for development of new services:
The company will be able to fabricate larger structures
that can only be manufactured portside to allow handling
and loading onto specialist vessels
Number of employees that may be
recruited
25+
25
Lobec Fabrications Ltd.
Main Contact
Email
Telephone
Company Description
John Brown
[email protected]
01493 850304
Address
Unit R, The Eurocentre, North River
Road, Great Yarmouth, Norfolk,
NR30 1TE
Website
www.lobec.net
Lobec Fabrications Ltd Based in Great Yarmouth were Founded
in 1988 is an independently owned manufacturing company
specialising in high quality steel fabrication and service support
we can offer the complete offshore engineering solution from
survey through to design procurement and commissioning
to the Oil and Gas, Renewable Energy sectors and Maritime
Industry, operating throughout the UK and overseas
Expertise
Lobec provides services to the oil and gas, renewable, marine
and structural fabrication industries. Services are offered in a
variety of materials including carbon, aluminum, stainless and
exotic
Standards & Accreditations
ISO 9001:2008 & ISO 14001
Services Offered
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
7,800 sq ft
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
26
Yes
Yes
Yes
Yes
Yes
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
Yes
Yes
Types of Fabrication Offered, and standards or specifications that can be
fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
Yes
The team of multi-coded welders are fully conversant with MIG, TIG and MMA processes,
and currently hold all positional approvals for carbon, stainless pipe and plate steel work.
Lobec Fabrications Ltd holds a full range of welding procedures and welder approvals with
our current documentation to BSEN and ASME and AWS standards.
Additionally new procedures can be put in place to suit any client project needs.
27
Moughton Engineering LTD
Main Contact
Email
Telephone
Company Description
Sarah Cann
[email protected]
01493 650195
Address
Units 11-15 Faraday Road, Gapton
Hall Industrial Estate, Great Yarmouth
Norfolk, NR31 0NF
Website
www.moughtonengineering.co.uk
The company provides a range of engineering services from
coded welding, CNC milling & turning, precision sheet metal
work, precision turner components, conveyor systems, plus
much more providing specialist services to both onshore and
offshore industries. Our uniqueness is the range of services that
we provide as a one stop shop.
Expertise
CAD, Precision
Turned Components, Manufacture &
Installation of Conveyor Systems, Oil & Gas Industry Sector,
Steel Fabrication, Steel Construction, Pipe work Systems, Coded
Welding, Finishes, On Site Work, 24 Hour Call Out
Standards & Accreditations
ISO 9001:2008, ISO14001:2004, Safe contractor, Achilles, FPAL,
UVDB
28
Company Facilities
Company Facilities - Equipment
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
Yamazki Lathe, Abac Compressor 50ltr, Ajax Pillar Drill, Akyapak
Powered Rollers 1290 x 90 x 2.5mm, Arc Welder, Containers,
Edwards DD 1250mm x 3.5mm Guillotine, Edwards Pearson
3M x 6.5MM CNC Guillotine, Edwards Pearson PR6 CNC Press
Brake, Edwards Pearson Press brake Tooling, Europac 220 6R
Notching Machine, Excel Milling Machine, Fly Press Norton
7A, Fobco Pillar Drill, HBS CD Studwelder, Hyster Forklift
Diesel – Q270 MAH, HPC Compressor, Hurco Hawk 30 CNC
Milling Centre, Hypertherm Plasma Machine, Kempi Plants,
Murex Transtig 353I Tig Welder, Pillar Drill, Yamazki Mazak
Lathe, Hurco VM10 Machining Centre, Bench Grinder, Hurco
VMX64, Yamazki Horizontal Lathe, Hurco VMX42ti Machining
Centre, Hurco VMX50ti Machining Centre.
22,000 sq ft
7.5 T
Not Applicable
Not Applicable
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Yes
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
No
Yes
No
Yes
No
Yes
No
No
No
No
No
Yes
Yes
No
Yes
No
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
DNV12079
Yes
PED
Yes
ASME, BS, NACE
No
Plans for development of new facilities
Expanding from 22,000sqf to 35,000sqf to a purpose built
building.
Plans for development of new services:
De-commission, new mechanical installations, increase
offshore trips to include presence and labour. Increase the
mobile workshop capacity.
Number of employees that may be recruited
15
Project Experience in Oil and Gas Year
Ongoing
Ongoing
2012
2011
2011
2011/2012
Ongoing
Ongoing
Project Details
Refurbishment and replace of national crane booms 5 year
project
Sizewell Power Station on going re-fit and mantaince projects
Fabrication of numerous valve transportation equipment
Fabrication stainless steel caisson pipework replacement
components
Fabrication of centralisers for drilling riser contracts
Fabricate replacement 100 foot seaking crane boom
Utilities/ drains replacement pipework
Fabrication maintenance contract
Turbine-Blade-Transport
Frac Frame
Client
Perenco
Contract Value (GBP)
£3 million
EDF Energy
EON Rhurgas
Perenco
½ million
£250,000
£120,000
Aquaterra
Perenco
Perenco
Perenco
£100,000
£250,000
£400,000
Lss Centralier - Riser Guide
Frac Valve Frame
29
Morgan Cooper
Main Contact
Email
Telephone
Company Description
Steve King
[email protected]
01493 843233
Address
Unit D, Salmon Road, Great
Yarmouth Norfolk, NR30 3QS
Website
www.morgan-cooper.co.uk
Morgan Cooper Ltd was formed in 1988 and has over 25 years’
experience in supplying quality steel fabrications to the oil and
gas, energy sectors and maritime industry. Since 1991 Morgan
Cooper Ltd has also supplied plate profiles to numerous local
machine shops and other fabrication companies
Expertise
Fabrication and welding, understanding the requirements for
a quick turnaround. Profile plate stock range from 6mm to
130mm in S355J2 & 15mm to 40mm in 355EMZ
Standards & Accreditations
Coded welders to AWSD1.1
S355J2/K2 AISI4130
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
30
Company Facilities - Equipment
550 m2
300 m2
300 m2
4T
Not Applicable
Not Applicable
No
Yes
No
No
No
No
No
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
No
No
Saw, guillotine, plate rollers, drills, brake press, profile machine
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
No
No
No
No
No
Yes
No
No
No
No
No
No
No
No
No
No
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
DNV and client designs
Plans for development of new facilities
None proposed
Plans for development of new services:
None proposed
No
Number of employees that may be
recruited
Due to the size of the premises (maximum of 12
employees, there will be no more than 2 more
employees)
31
Pruce Newman
Main Contact
Company Description
Paris Johnston
Telephone
01953 605123
Pruce Newman Pipework Ltd is a Mechanical Services Contractor,
established for over 40 years and working in the Engineering
Construction Industry Sector.
Addresses
Ayton Road, Wymondham, Norfolk,
NR18 0QJ
Expertise
Email
[email protected]
Suite 5, Riverside House,
Lower Southend Road, Wickford,
Essex SS11 8BB
Website
www.prucenewman.co.uk
Company Facilities
32
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
6500 m2
600 m2
650 m2
250 m2
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
5T
Not Applicable
Not Applicable
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Our main area of expertise is the fabrication and installation
of pipework in stainless, mild, galvanised and coated steels,
ductile iron, and copper. We also have the capability to work
with thermo setting plastics; plastic coated and lined mild steel
materials. Pruce Newman is also experienced in the fabrication
of smaller tanks, vessels and general fabrications in mild and
stainless steels.
In addition to our piping activities, we can provide steelwork
fabrication and installation, provision of project costing’s,
programming and planning, the management and procurement
of associated project trades and equipment, such as pumps,
tanks, filters and vessels. Pruce Newman also provides staff
for maintenance and shut down activities, on a day rate, on
customer or fully managed basis.
Adjacent to our Norfolk head office we have a 9,000 square foot
fabrication facility, fully equipped with overhead cranes, band
saws, pipe preparation equipment, hydraulic guillotines and
welding bays. These facilities enable us to undertake fabrications
of pipework and vessels in lengths of up to 12.0m and up to 5
tonnes capacity, with a similar capacity for steelwork.
Our labour force consists of approximately 90 skilled tradesmen,
coded MMA, TIG, MIG and FCAW welders, advanced fitters,
platers and experienced foremen. These operatives cover the
whole of East Anglia and South East regions, though we have
undertaken projects throughout the UK.
As a company we develop, operate and maintain many specialist
welding procedures qualified in accordance with BS-EN-288-3/
ISO 15614-1 and ASME 1X, with all our welders qualified in
accordance with BS-EN-287-1/ ISO 9606-1 and ASME 1X. All
our staff are CSCS/ACE scheme qualified and we have several
‘Approved Plumbers’ and Capita ‘Gas Safe’ registered operatives
amongst our NVQ qualified pipefitting staff.
With the continued investment in Safety and Supervisor training
we pride ourselves with a class leading record in Health and
Safety statistics.
Standards & Accreditations
Accreditations: ISO 9001, ISO 18001, Achilles Verify, Achilles
UVDB, CHAS, Constructionline, Safecontractor, Gas Safe,
Approved Plumber Standards: BS EN 287 & 288, ASME IX,
BS2633, BS 4677. BS5950. PD5500 – EN13445
Company Facilities - Equipment
Telehandlers, welding plant (inc generators), site workshops,
pipe preparation equipment, lifting tackle & craneage (hired)
etc
Plans for development of new facilities
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Yes
No
Yes
No
Yes
No
Yes
No
Further investments into automated fabrication, facilities and
equipment
Plans for development of new services:
Development of In-House Design Service
Number of employees that may be recruited
5% Growth year on year
Types of Fabrication Offered, and standards
or specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Design, Non
Destructive Testing,
Shot Blasting, Painting
& Coating, Craneage.
Yes
BS5950
Yes
PD5500 - EN13445
Yes
BS EN 287 & 288, ASME IX, BS2633, BS 4677
No
Project Experience in Oil and Gas Year
2012-2013
2012-2013
1973-2013
2011-2012
Project Details
Fuel Hydrant, Filter & Pump House Replacement
Fuel Transfer Jetty Pipelines Replacement – West
Thurrock Phases 1-3
Carbon Dioxide Plant
New Works & Maintenance
Client
RAF Mildenhall Suffolk
Not provided
Contract Value (GBP)
£650,000
£1,450,000
British Sugar
May & Baker/ Rhone
Poulenc/Aventis/ Bayer
Crop Science Norwich
£1,200,000
£1,000,000 PA
Recent Projects
Chemical vessel installation
East Anglia
Stainless steel filter piping installation
Chemical Plant Instalation
33
Ro-Co Engineering Services Limited
Main Contact
Email
Telephone
Address
Company Description
Julian Grant
[email protected]
01493 602744
Unit 8 Sinclair Court, Gapton Hall
Industrial Estate, Great Yarmouth,
Norfolk, NR31 0NH
Roco offers a number of services including fabrication, coded
welding, and sheet metal work in carbon steel and stainless
steel. Fabrication of DNV offshore frames, skids, for oil, Gas,
and petrochemical companies
Website
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
34
Company Facilities - Equipment
19,000 sq ft
7,000 sq ft
4,000 sq ft
7,000 sq ft
40 T
5 T Overhead
Crane
Not Applicable
Not Applicable
Yes
Yes
Yes
No
No
No
No
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
No
4 mtr x 180 tonne 5 axis CNC hydraulic break press, 3 mtr
x 12mm CNC hydraulic guillotine, Punch/steel worker, Mig,
Tig, MMA welding plants, Oxy/acetylene cutting equipment,
Drills, Band saws, 3.5 T forklift, 5 T overhead crane.
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
No
Yes
Yes
No
No
Yes
No
No
No
No
No
No
No
Yes
No
No
NDT inspection, load
testing, blast and painting,
pressure testing, mobile
crane & transport, all
within a 1 mile radius.
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
DNV 2.7-1 offshore container specification
No
Plans for development of new facilities
Erection of new 40’ x 40’ x 21’ fabrication building.
Plans for development of new services:
Working towards BS EN ISO 9001 Accreditation
No
No
Number of employees that may be
recruited
Additional employees will be around 4 increasing with
work scope
Project Experience in Oil and Gas Year
Ongoing
Ongoing
Ongoing
Ongoing
Ongoing
Ongoing
Project Details
Client
Various offshore skid based frames to DNV 2.7,1
B J Services, Baker
standards, from 3T to 20T, acoustic & non acoustic Hughes Coil Services,
Halliburton, KCA
Deutag, AHG, Perenco
Sub frame assemblies for the offshore skids
Not provided
including engine bed, tank frame, pipe supports,
various hydraulic pump mounts, fuel tanks
Sub frame assemblies for engine packages
Finning Power Systems
including component supports & mounts.
Stainless steel fabrication including: Hydraulic
Not provided
oil tank, fuel tanks, acoustic enclosures, control
boxes, acoustic louver boxes
Various sea fastening projects on to barges, and
Not provided
supply vessels.
Various fabrications and onshore support including AJS/Shell
handrails and pipe supports
Contract Value (GBP)
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
35
Round House Limited
Main Contact
Email
Telephone
Company Description
Andy Coleman
[email protected]
01502 515220
Address
57 Pinbush Road, South Lowestoft
Industrial Estate
Website
www.roundhouse.biz
Round House Limited is an independently owned fabrication
company with more than 50 years of engineering experience.
Twenty Eight Thousand Square Feet of workshop space and
purpose built offices enable us to provide an ISO 9001 approved
manufacturing service, including steel and stainless steel
fabrication, with some of the largest laser cutting and folding
capabilities in the East of England.
Over this 50 year period, Round House Ltd. has built up an
enviable reputation for providing the highest quality products
which is supported by our ISO 9001 accreditation and our ability
to provide the highest levels of customer service available in the
industry, ensuring you have total confidence in our products and
service.
We stock a wide range of materials, including mild steel,
stainless steel and aluminium, fully certified to internationally
recognized standards.
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
28,000 sq ft
24,000 sq ft
20,000 sq ft
Standards & Accreditations
ISO 9001 2008, FPAL Registered
Max. Lift (T)
36
Max. Water Depth (m)
Min. Water Depth (m)
Other
Not Applicable
Not Applicable
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
No
Yes
Yes
No
No
No
No
Yes
No
No
No
No
No
No
No
No
No
Yes
No
No
No
Yes
Yes
Yes
Company Facilities - Equipment
TruLaser 3040 4 x 2 metre laser cutting machine, 4M TruBend
5230S Press Brake , Amada 3M Brake Press, Lissmac Deburring
Machine, Welding Bays x 15, Various Manual Mills/Lathes
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
No
No
No
No
Yes
No
Yes
No
No
No
Yes
No
No
No
No
No
Yes
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
DNV & Lloyds
No
Plans for development of new facilities
Extension to current buildings to give another 6,000
sq feet of workshop
Plans for development of new services:
Yes
None provided
Yes
Laser-cut Plate, Stainless Enclosures, Cabinets and
Boxes Stainless & Aluminium Cable Tray
Number of employees that may be
recruited
None provided
37
S&G Fabrications
Main Contact
Email
Telephone
Company Description
Dave Hayes
[email protected]
01502 566734 / 574162
Address
Horn Hill, Lowestoft, Suffolk,
NR33 0PX
Website
[email protected]
S and G Fabrications was established in 1974. The current
Directors took it over 8 years ago and have invested and
developed the fabrication facility. Increasing turnover year on year
the current facility offers panels and frames for the off-shore oil
and gas industries
Expertise
General fabrication, structural steelwork such as towers, S&G
specialize in the manufacture of stainless steel HPU’s , WCP’s,
Reservoirs, TUTU’s all to clients specifications, including DNV
certification for inspection and load test
Standards & Accreditations
ISO 9001 and OHSAS 18001
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
38
Company Facilities - Equipment
Yes
Yes
No
No
No
No
No
Yes
No
No
No
No
No
No
No
No
No
No
Yes
No
No
Yes
Yes
No
Although we don’t
have in house paint
and machining
facilities we work
closely with two local
accredited companies
specializing in these
fields
Forklifts & cranes can be hired if required for load out,
Guillotine CNC punching facility, Press brake, calibrated MIG
and TIG welding plants
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
No
No
Yes
Yes
No
Yes
No
No
No
Yes
No
No
No
No
No
Yes
Coded welding
and fabrication of
Ferrous and Non
Ferrous materials
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
No
No
No
No
Plans for development of new facilities
We are trying to purchase our own facility as opposed
to renting, this is subject to funding and Mortgage
both which seem to be difficult to obtain would allow
us to increase the work force however, we are at our
capacity with 16 in the current facility
Plans for development of new services:
None provided
Number of employees that may be
recruited
None provided
Project Experience in Oil and Gas Year
2009-Current
2009-Current
2009-Current
2013
2013
2013
2013
2013
Project Details
Hydraulic Power Unit Shell Sweep
Hpu DANA
WCP Ketch and Corvette
Various main frame DNV approved weldments
KEW HPU and Hydraulic reservoirs and TUTU’s
PANYU HPU and TUTU’s
JETTE HPU, TUTU’s Reservoirs
Various panels and accumulator racks
Client
SMS
SMS
SMS
HYDRA-RIG
SMS
SMS
SMS
SMS
Contract Value (GBP)
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
39
Sailspar Ltd
Main Contact
Email
Telephone
Company Description
Penny Beech
[email protected]
01206 251348
Address
The Old Marconi Works, Hilliards
Road, Great Bromley, Colchester,
CO7 7US
Website
www.sailspar.co.uk
Established in 1968, Sailspar is a small family owned manufacturing
business now specialising in high quality aluminium and stainless
steel fabrications. Within easy reach of Harwich, Brighlingsea
and other East Coast harbours we are well placed to provide
a top quality comprehensive and competitive service in both
aluminium and stainless steel including windfarm vessel
fabrications and fabrication repairs.
Expertise
Sailspar has a dedicated team of talented, experienced people
with a wide range of fabrication skills.
Standards & Accreditations
Working towards ISO9001 (BSI) accreditation
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
40
Company Facilities - Equipment
6,000 sq.ft approx
Yes
Yes
Yes
No
No
Not Applicable
Not Applicable
Not Applicable
As above
As above
As above
Not Applicable
No
No
No
Yes
No
No
No
No
Yes as above
No
No
No
No
No
No
Yes
No
No
No
No
The factory has two internal cranes. For larger lifts mobile
cranes are hired in. The company has CNC punch , press and
guillotines as well as all of the equipment associated with a
welding and fabrication company.
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
No
No
Yes
No
Yes
Yes can outsource
Yes
No
No
No
No
No
No
No
Yes
Yes
No
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
Fabrications for vessels
BS EN 15614/2 (12) and EN 9606/2 (11)
Fabrications for vessels
BS EN 15614/2 (12) and EN 9606/2 (11)
Stainless steel and aluminium fabrications
41
Stanref International
Main Contact
Email
Telephone
Company Description
Ken Barnard
[email protected]
01284 763501
Address
Northern Way, Bury St Edmunds,
Suffolk IP32 6NL
Website
www.stanref.co.uk
Stanref International have been a leading manufacturer of
pressure vessels and heat exchangers for the commercial &
industrial refrigeration industries since 1982. Over the past
decade we have also targeted the Oil & Gas, Petrochemical and
Process sectors and have seen our presence in these markets
expand steadily; they now comprise a significant portion of our
overall turnover.
Standards & Accreditations
ISO 9001:2008 & the majority of the products manufactured are
produced in accordance with the Pressure Equipment Directive
Dir.97/23/EC and CE marked where applicable. Stanref also hold
ASME U1 Certificate with National Board authorisation.
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
42
Company Facilities - Equipment
24,000 sq ft
3 x 5 T Gantry Cranes, 7 x 1 T Pillar Cranes, 1 x 5 T Forklift, 1
x 3 T Forklift, Manual 20ft x 8ft Shot Blasting Enclosure
2044 m2
10 T
5T
Not Applicable
Not Applicable
Yes
Yes
Yes
Yes
Yes
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
Yes
Yes
Radiography, ultrasonic,
MPI & DPI, hardness
testing, PMI, post weld
heat treatment, high
spec painting.
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Plans for development of new facilities
No plans at the moment
Plans for development of new services:
Yes
No plans at the moment
Yes
Number of employees that may be
recruited
No plans at the moment
43
Steel Services
Main Contact
Email
Telephone
Address
Website
Company Description
Paul Sneller
[email protected]
01493 856180
South Denes Road,
Great Yarmouth, Norfolk,
NR30 3PF
www.steelservices.co.uk
Steel Services have a proven track record based on 40 years
experience, providing design, fabrication and engineering
facilities to the Petrochemical Industry and Civil Engineering
Divisions. The company has recently expanded by adding a new
self contained pressure testing and welding workshop.
Expertise
Design & manufacture of pressure vessels, pressure fabrications
(pipespools,) pressure systems inc high pressure pipework, in
accordance with module H of PED 97/23/EC Transportation Skid
frames to DNV 2.7.1 and BSEN12079
Standards & Accreditations
ISO 9001:2008 PED 97/23/EC.
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint / Finishing Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
44
Company Facilities - Equipment
11608 m2
7480 m2
2525 m2
865 m2
80 T
32 T
10m
5m
Yes
Yes
Yes
No
No
No
No
Yes
Yes
No
No
Yes
No
Yes
No
No
No
No
Yes
No
No
Yes
No
No
Overhead Cranes 2 x 16t 2 x 10t 2 x 5t and 3 x 2t. flare boom
testing facility, Hydrotest bay, dedicated welding bay. Paint/
Finishing Shop. (Construction has been completed and it is
now in use).
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
No
No
Yes
No
No
No
Yes
No
No
No
No
No
No
Yes
Yes
No
Yes
Proof testing, painting,
instrumentation,
electrical, structural and
pressure vessel design
calculations.
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
DNV 2.7.1 DNV 2.7-3 and BSEN12079
Yes
PD5500 and ASME VIII
Yes
ASME B31.3 API 6A
Plans for development of new facilities
Project Office Block.
Plans for development of new services:
Number of employees that may be
recruited
Maximum of 10
Project Experience in Oil and Gas Year
2014
2012
2012
2010
2008
Project Details
Pump and Cooler Packages
High pressure pipework package
Petrosa pipework & pressure vessels
Underbalanced drilling package
Satellite platforms
Client
Expro Group
Expro Group
Expro Group
Haliburton
Aquaterra Energy
Contract Value (GBP)
Not provided
Not provided
Not provided
Not provided
Not provided
45
Sembmarine SLP
Main Contact
Email
Telephone
Address
Andrew Thomson
[email protected]
01502 548000
Hamilton Dock, Lowestoft, Suffolk,
NR32 1XF
Company Description
Sembmarine SLP Ltd is an EPC contractor providing turn-key
solutions to the energy industries taking projects through from
FEED to final commissioning with in-house design & engineering,
Project Management, Procurement, Compliance, Construction,
Commissioning and Offshore hook-up support.
Expertise
Website
www.slp-eng.com
Sembmarine SLP has extensive experience with EPC contracts
for Minimal Facility Platforms (NUI’s), Offshore accommodations
facilities, process modules, offshore hook-up and brown-field
modifications and offshore sub-stations.
Standards & Accreditations
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
Open Fabrication Area
Covered Fabrication Area
Warehouse and Storage
Environmentally controlled storage
Sea frontage
River Frontage
Dry Dock
Office
Lay Down Area
Accommodation Space
Quayside storage
Paint Shop
Engineering workshop
Electrical workshop
Joiners workshop
Shotblast enclosure
Mechanical Workshop
Segregated facilities
Load testing facilities
Mechanical testing
Mobile Workshops
Carbon steel workshop
Dedicated Stainless steel workshop
Machine shop
Other
46
55,000 m2
25,300 m2
5,300 m2
10,000 m2
2 x 6000 T load out
quays
350 T SLP cranes or
hire to suit specific
requirements
5.1m
4.1m
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
No
Yes
Yes
No
No
No
No
No
No
No
No
Yes
No
No
ISO 9001:2008 – Quality Management Systems, ISO 14001:2004
– Environmental Management Systems, OHSAS 18001:2007 –
Occupational Health & Safety Management System, Pressurised
Equipment Regulations (PED) Module II
Company Facilities - Equipment
The factory has two internal cranes. For larger lifts mobile
cranes are hired in. The company has CNC punch , press and
guillotines as well as all of the equipment associated with a
welding and fabrication company.
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
Yes
Yes
No
Yes
No
No
No
No
No
Yes
No
Yes
Yes
No
Yes
No
Design & Engineering,
Procurement, Compliance,
Structural and pipe
fabrication, scaffolding,
electrical, telecoms,
instrument fit-out,
commissioning
NDT, Architectural fitout, HVAC fabrication &
Installation, load-out,
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
Yes
EEMUA 158 / DNV OS-C401
No
Plans for development of new facilities
Looking increase engineering and fabrication capacity
Plans for development of new services:
None proposed
Yes
ANSI-B-31.3 / PED 97.23EC – SI 1999;2001
Yes
Electrical Installation - IEE Regulations 17th Edition /
ATEX Directive
Number of employees that may be
recruited
200-300
Project Experience in Oil and Gas Year
Ongoing
2009
2009
1994
Project Details
Wellhead Platform for Katy Platform
Thanet Offshore Substation
Wellhead / Production platform (2000 T)
Process Module and process Packages (5000 T)
Client
ConocoPhillips
Siemens
E.ON
Shell
Contract Value (GBP)
Katy Loadout
Aerial View Hamilton Dock
47
Warren Services
Main Contact
Email
Telephone
Company Description
Clive Poyner
[email protected]
01842 760850
Address
Fison Way, Thetford, Norfolk, IP24
1HT
Website
[email protected]
Company Facilities
Total Area
Assembly Area
Covered Area
Storage Area
Load Out Capacity
Max. Lift (T)
Max. Water Depth (m)
Min. Water Depth (m)
Other
9,000 m2
1,500 m2
1,00 m2
2,000 m2
Not Applicable
Not Applicable
“1000 sq metres of
CNC machining, 1000
sq metres of welding,
fabrication and finishing
1000 sq metres of water
jet, laser and folding cell.
500 sq metre assembly
processes, Mechanical
assembly and testing
Electrical assembly wiring
and testing”
Open Fabrication Area
No
Covered Fabrication Area
Yes
Warehouse and Storage
Yes
Environmentally controlled storage No
Sea frontage
No
River Frontage
No
Dry Dock
No
Office
Yes
Lay Down Area
No
Accommodation Space
No
Quayside storage
No
Paint Shop
Yes
Engineering workshop
Yes
Electrical workshop
Yes
Joiners workshop
No
Shotblast enclosure
Yes
Mechanical Workshop
Yes
Segregated facilities
No
Load testing facilities
No
Mechanical testing
Yes
Mobile Workshops
No
Carbon steel workshop
Yes
Dedicated Stainless steel workshop No
Machine shop
Yes
Other
48
Warren Services Limited (WSL) has grown progressively since
being founded in 1988 and now totals 90 skilled employees.
The company occupies a modern factory facility in Thetford at
IP24 1HT, with an extensive capital equipment list employing the
latest technologies. The shop floor area covers approximately
3,000 sq metres. This is utilized as 1000 sq metres of CNC
machining with 5th axis capability, 1000 sq metres of fabrication
with10 t lifting capacity and 1000 sq metres of water jet, laser
and folding.WSL finishing and assembly processes are located
in a separate 5000sq metre facility that is 300m from the main
factory. Recent projects will reside in Russia, Macau, Las Vegas
and Mexico amongst others.
WSL have also supplied engineered products to some of the
biggest names in the pop industry, an example of this is the Take
That “Om” man. WSL has set out its strategy to be a complete
manufacturing partner. To this end the company can now offer
multiple processes under one roof. WSL has been building on its
reputation for ‘being part of the customers team’ by adding
more processes and increasingly focusing on full fabrication
capability.
Expertise
WSL can offer a complete manufacturing service from the
Thetford factory. Our core customers operate in the staging,
specialist vehicles ,fire suppression, oil, gas, nuclear and
renewable energy sectors. Many more sectors complete our
customer base. Our process list includes: Mechanical assembly
and testing, Electrical assembly wiring and testing, CNC milling
5 axis, CNC turning, EDM wire eroding, Water jetting, Laser
& break press cell, Coded welding in St/St & Ali, Complex
fabrications, Powder coating, Shot blasting and spray bake
painting, Prototype development, Design (Solidworks)
Standards & Accreditations
Approved to ISO 9001:2008, ISO 14001 & OHSAS 18001
Company Facilities - Equipment
Profiling: IFB2 Dynamic Water Jet Cutter, 3.8 l/min flow rate,
Travel 3m x 500 x 1800, Laser/Folder, Laser has a 3m x 1.5m
sheet size bed, BREAK press, 4m folding length, 220t capacity,
Wire Eroder (Cut 20), Drill (Spark Eroder) Finishing: Airblast
(Shotblaster) L8m x W3.5m, STL Spraybooth-Width - 4m
-Height - 5.9m Powder Coating Oven Sizes 6m long x 2m x
2m. Machines Mills and Lathes, Haas TM-1 Tool Room Mill,
Haas TM-2 Tool Room Mill, GHT 4 G2 CNC lathe, Max swing
over cross slide – 470mm, Max swing over bed – 720mm,
Distance between centres – 1000-6000mm, Alpha 400S
CNC lathe, Lynx 200 CNC lathe, Harrison – Manual Lathe 3ft
length 250mm Diameter, Dean Smith & Grace - Manual Lathe
2m length, 350 Diameter, Haas SL10 CNC lathe, Haas TL 15
CNC lathe , A20 Citizen CNC Lathe , A32 Citizen CNC Lathe
– Mari Seiki ( New machine approximate delivery date early
November 2011) Haas EC1600 horizontal mill, Dahlih 720
CNC Mill, Eikon MV3 1800 CNC Mill, Nakamura-Tome
SC-300 CNC lathe, Puma 400 LMB CNC lathe, Dahlih 1020
CNC Mill, Welding
Services Offered
Project Management
Electronic / Electrical Fabrication
Design work
Load testing
Machining & Grinding
Metal Casting
Metal Forming & Shaping
Hydraulics
Plastics & Composites
Plastics Welding / Joining
Surface Treatment
Field Joint Coating
Instrumentation
Provision of personnel
Marine
Installation & Commissioning
Non destructive testing
Other
Third Party
Yes
Yes
Yes
No
Yes
No
Yes
No
No
No
Yes
No
No
No
No
No
No
Zinc Plating, Various
surface treatment, load
testing, MPI testing & NDT
Types of Fabrication Offered, and standards or
specifications that can be fabricated to
Structural
Standard
Vessels
Standard
Pipework
Standard
Other
Standard
No
No
No
Yes
Our welders are all coded and Lloyds Certified
to BSEN 287-1
Plans for development of new facilities
The new factory has been earmarked as an Apprentice Training
School development
Plans for development of new services:
Futher electrical assembly
Number of employees that may be recruited
25
49
Other Fabrication Facilities
Insufficient data for full listing at time of publication
AFS Limited
Main Contact
Email
Telephone
Address
Website
Mark Beales
[email protected]
01502 518880
Ocean View, Commercial Road,
Lowestoft, Suffolk, NR32
www.afsgb.co.uk
Company Description
AFS Ltd is an independently owned manufacturing company
specialising in high quality steel fabrication to the Oil and Gas,
Renewable Energy sectors and Maritime Industry, operating
throughout the UK and overseas.
Established in 1999 and based in Lowestoft Suffolk, AFS aim
to provide a first class service, with a high quality product,
produced safely, on time and within budget.
Whatever your project needs, be they specialist equipment
manufacture, requiring third party welding inspection, or small,
bespoke metalwork projects with fine aesthetic appeal.
All services are offered on a 24-hour 7 day a week basis, with
direct contact with senior AFS management at all times.
Coles
Main Contact
Email
Telephone
Trevor Cole
[email protected]
01493 602100
Address
Steam Mill Lane, Great Yarmouth,
Norfolk, NR31 0HP
Website
www.colesgreatyarmouth.co.uk
Company Description
Coles has been part of the fabrication industry for over 55
years, supplying structural steels and fabrication services to a
multitude of clients and industries. Covering the East of England
primarily, Coles offers both commercial and domestic fabrication
in addition to bespoke services.
Fabcon Projects
Main Contact
Email
Telephone
50
Andrew
[email protected]
01603 482338
Address
Delta Close, Norwich, Norfolk,
NR6 BG
Website
www.fabconengineering.co.uk
Company Description
Originally founded to provide a fabrication pipework service
to the offshore and subsea industries, Fabcon has evolved to
become one of the regions foremost suppliers of technically
engineered solutions. Based in Norwich, Fabcon offers their
products on both a national and international basis.
GR Carr
Main Contact
Email
Telephone
John Riley
[email protected]
01268 522226
Address
Archers Fields Close, Archers
Fields, Burnt Mills Industrial Estate,
Basildon, Essex SS13 1DN
Website
www.grcarr.com
Company Description
Founded in 1970, GR Carr (Essex) Ltd. is a private limited
company specialising in the provision of Mechanical Engineering
Services to a wide range of industrial sectors. GR Carr’s in-house
fabrication facilities and personnel guarantees that we have
flexibility to offer a comprehensive prefabrication and installation
service in carbon steel, stainless steel, stainless steel alloys,
chrome molybdenum, glass reinforced epoxy, polypropylene,
polyethylene, ABS and PVC.
L&G Engineering
Main Contact
Email
Telephone
Adie
[email protected]
01603 721254
Address
Unit 14, Ramirez Road, Rackheath
Industrail Estate, Norwich, Norfolk
Website
www.landgengineering.co.uk
Company Description
L&G Engineering provide skilled engineering and high quality
manufacturing services to suit a variety of requirements. Services
are provided to a number of sectors including the food, gas
brewing and offshore industries.
51
Port Information
Wells-next-the-Sea
Owner / Operator
Wells Harbour Commissioners
Port Name and
Address
Port of Wells / Wells Harbour
Harbour Office, West Quay,
Wells-next-the-Sea, NR23 1AT
Contact Name
Latitude
Longitude
52
Robert Smith
Harbour Master
01328 711646
[email protected]
www.wellsharbour.co.uk
52° 57’ 26” N
General Port Information
Despite being one of the smaller ports in the East of England,
Wells has became the chosen base for survey, crew and work
boats supporting construction and operation of the Sheringham
Shoal offshore windfarm. The town and port are likely to play
a similar part in the development and operation of other new
windfarms being planned for the southern North sea. A new
Outer Harbour was completed in 2010 to accommodate new
commercial activity. The harbour entrance channel is regularly
dredged to extend the times that shallow drafted workboats
(28m LOA) can enter and leave the harbour. The Outer Harbour
has 165m of shore accessed pontoon berths with all associated
services, including fuel, fresh water and electricity.
0° 51’ 23” E
Quay length
Site Size
Vessel Allowance
Inner Harbour
240m quayside
30 acres
Max 37m (LOA)
Draft 3m
Outer Harbour
165m pontoons
5 acres
Max 28m (LOA)
Draft 3m
Facilities
Quayside for craning / hard standing, slipway for launching and recovery, secure compound, security
lighting, regular surveillance, one acre of outdoor storage, bunkering, warehousing and office accommodation.
Equipment
Boat Hoist, tractor for trailer launching, Port Feeder vessel (for commercial transportation), fork lift and port
HGV for transportation requirements.
Water Depth
3m Outer Harbour
2.8m springs Inner Harbour
Main Activities
Wells Harbour has a long-standing marine history and a busy commercial fishing fleet and a variety of purposes,
both commercial and leisure. Although popular with tourists and local water sports it recently became a major
base for wind farm support services during the survey, construction and maintenance stage of Sheringham
Shoal Windfarm. The harbour is now a home to a number of offshore vessels which service the turbines on a
daily basis.
Transport links
Norwich Airport 50km
Port Information
Great Yarmouth
Owner / Operator
Port Name and
Address
Contact Name
Latitude
Longitude
Great Yarmouth Port
Company Limited
EastPort UK
EastPort UK House,
South Beach Parade,
Great Yarmouth, Norfolk,
United Kingdom, NR30 3GY
Jill Hardy
Customer Relations Manager
01493 335510
[email protected]
www.eastportuk.co.uk
General Port Information
Privately owned and operated since May 2007, the port at
Great Yarmouth is a modern, multi-purpose facility integrating
a deep-water outer harbour with a well established river port.
Newly constructed, the outer harbour became operational in
February 2010.
Strategically located in the Southern North Sea the port has
become a centre of excellence in the offshore sector and with
the introduction of the outer harbour, the port can facilitate the
larger offshore vessels now being deployed.
52° 35’ 26” N
1° 43’ 46” E
Quay length
Site Size
Vessel Allowance
1000m (Harbour)
Beam 45m
67 acres (with
plans for a further
37 acres)
Max. 500 ft LOA,
Max 246 ft Beam
3000m (River)
Beam 28m
Facilities
Deep water outer harbour offering easy access at all states of tide, 150m width at harbour entrance, 1000 m
of quay space, sheltered water, 365 days working, nor bridges or locks, adjacent warehousing and open space.
EastPort UK also offers a river port with 36 quays covering 3000m, safe/sheltered berths, length up to 110m,
draught of up to 5.7m. Warehousing / Storage / Office Accommodation - These can be adapted for a variety of
purposes including specialist facilities for bulk (grain type) cargoes and racking for offshore support purposes.
The port has two modern complexes whose design makes them particularly suitable for break-bulk cargoes.
Open storage is available for short or long term contracts and includes a fully walled area of 7.2 acres. All main
areas for open storage are concreted to a high standard, are fully lit and have the option of security.
Equipment
3 X NCK80 crawler cranes, 8 X FLT’s -3FLT’s X 5 tonnes, 1 FLT X 8 tonnes, 1 X FLT 16 tonnes, 2 X Shovel loaders
Water Depth
10 m at BD (Outer harbour)
River – variable according to berth
Main Activities
Offshore - EastPort UK is England's Nº 1 offshore support port and the UK's Nº 2, second only to Aberdeen.
Renewables - The port is the closest deep water facility to the East Anglia Offshore Wind Farm site and the
near Continent, and arguably has the largest concentration of offshore wind projects in the world within 100
miles of the port. Decommissioning - Recognising that decommissioning raises complex issues, EastPort UK
works in partnership with the sector and its supporters to tailor services to meet the needs of project managers,
suppliers and contractors. General and Project Cargo - EastPort UK handles a wide range of cargoes including
aggregates, cement, dry and liquid bulks, fertilisers, forest products, grain and minerals. EastPort UK also has
the capacity to handle specialist projects including wind farms, pipelines and offshore modules.
Transport links
Yarmouth train station 4.8km, Norwich Airport 40km
53
Port Information
Lowestoft
Owner / Operator
Port Name and
Address
Contact Name
Latitude
Longitude
Associated British Ports
Port of Lowestoft
Commercial Road, Lowestoft
Suffolk, NR32 2TE
Roger Arundale
Deputy Port Manager, East Anglia
01502 572286
[email protected]
www.abports.co.uk/Our_
Locations/Short_Sea_Ports/
General Port Information
Situated directly opposite major Continental ports, the Port of
Lowestoft serves the busy sea routes between the UK, Europe,
Scandinavia, and the Baltic States. With large industrial fabricators
nearby its location is ideal for shipping large offshroe structures
to the North Sea.
52° 28' 24" N
1° 44' 3" E
Quay length
Site Size
Vessel Allowance
3,500m
97 acres
Max. 125m LOA, Max. 35m
Beam, Max. Draft 6m
Facilities
Extensive storage facilities provide high-quality open and covered quayside storage.
Equipment
Mobile cranes
Main Activities Dry Bulks - A 14,000-tonne capacity silo and storage facility at Silo Quay accommodates a range of bulk materials,
including grain and cement. Forest Products - The port handles timber from Scandinavia and the Baltic States on
a regular basis. Offshore Activity - The port is home to the Operation and Maintenance Base for Greater Gabbard
Offshore wind farm. Sembmarine SLP Engineering Ltd offers extensive facilities for the construction of large
topside-deck structures and jackets destined for the North Sea and other oil and gas fields and wind farms. AKD
Engineering offers fabrication facilities within the Inner Harbour. The port is home to a substantial fleet of offshore
standby / support vessels. Facilities are available for ship repairs, including a dry dock
Transport links
54
Lowestoft train station 0.75km, Stanstead Airport 152km, Norwich Airport 56km
Port Information
Ipswich
Owner / Operator
Port Name and
Address
Contact Name
Latitude
Longitude
Associated British Ports
Port of Ipswich
Old Custom House, Key Street,
Ipswich, Suffolk, IP4 1BY
Alastair MacFarlane
Port Manager
01473 231010
[email protected]
www.abports.co.uk/www.abports.
co.uk//Our_Locations/Short_Sea_
Ports/Ipswich
General Port Information
The Port of Ipswich, situated at the head of the River Orwell and
12 miles from the open sea, is within a short sailing time from
the North Sea shipping lanes. Commercial operations at Ipswich
are divided between three tidal quays, Cliff Quay, Power Station
Quay and the West Bank. The Wet Dock is being transformed
into a large marina, and commercial operations there have now
ceased.
52° 2’ 22” N
1° 9’ 24” E
Quay length
Site Size
Vessel Allowance
1,500m
275 acres
Max. 155m LOA (Cliff Quay)
Draft 8.5m
Facilities
Cliff Quay has facilities for the handling and storage of both liquid and dry bulks. Covered storage totalling 72,000
sq metres.
Equipment
West Bank - 2 x 37.5 T Cranes equipped for container handling. The Cliff Quay Terminal is equipped with a 37 T
crane and two rail-mounted gantries of 35.6 T, together with an extensive container storage area.
Water Depth
8.6m
Main Activities Container handling - Cliff Quay Container Terminal is equipped with a 40-tonne capacity crane and rail-mounted
gantries, Container lines can take advantage of adjacent warehousing for distribution services. Dry Bulk - The port
handles aggregates, grain, animal feed, fertilisers, and cement, ABP’s Coldock Terminal offers over 16,000 sq m of
covered warehousing. The port has two aggregates terminals. Forest Products - Ipswich handles around 200,000
cu m per annum of various timber products from Scandinavia and the Baltic States, State-of-the-art timbertreatment centre offers chromium- and arsenic-free wood-preservative. General Cargo - Considerable experience
in general-cargo handling. The port has plant, equipment, and weighbridges to cater for heavy-lift and project
cargoes. The port offers three sailings per month to and from the Caribbean, and a monthly sailing to Famagusta
(Cyprus).
Transport links
Ipswich train station 1km, Stansted Airport 80 km
55
Port Information
Harwich
Owner / Operator
Port Name and
Address
Contact Name
Latitude
Longitude
Hutchison Port Holdings
Harwich International Port
Parkeston Quay, Harwich, Essex,
CO12 4SR
Steven Hume
Commercial Manager
01255 252272
[email protected]
www.harwich.co.uk
General Port Information
Harwich International Port is one of the UK’s leading multi-purpose freight and passenger ports with excellent road and rail
links to the Midlands, London and the South East. It is ideally
located for North Sea freight and passenger traffic to and from
Scandinavia and the Benelux countries, offering first class ro-ro,
ferry, container and bulk operations.
Quay length
Site Size
Vessel Allowance
1,600m
260 acres (with
planning consent
for a further 247
acres)
Max 320m LOA
(maximum berth 380m)
51° 56’ 53” N
1° 15’ 3” E
Facilities
Over 1,600m of quay capable of handling ro-ro, cruise berths, general cargo, project cargo, dry and liquid bulks.
Total port area of 260 acres, of which 60 acres immediately adjacent to quay can be dedicated to specific projects.
Over 10,800m2 of undercover storage.
Equipment
2 x 36t ship to shore gantry cranes, 1 x 45t mobile crane, 15 x fork lifts up to 16t, 2 x 42t reachstackers, 40 x
internal tractor units, 1 x telehandler, 1 x cherry-picker and numerous trailers etc.
Water Depth
Up to 9.5m at Chart Datum
Main Activities Sheltered within the Harwich Haven, Harwich International Port offers fast lock-free access to the North Sea and
beyond, with no air-draft or beam restrictions, from one of the UK’s finest natural harbours.
Long known for its position as one of the UK’s leading freight and passenger ports, Harwich International Port
offers more than 28 weekly ro-ro connections to The Netherlands and Denmark, as well as being one of the
country’s leading cruise ports.
The port also has wide experience of both dry and liquid bulks, project cargo and warehousing.
Building on the strength of these more traditional sectors, the port has now firmly established itself within the
energy market.
Harwich International Port has been at the forefront of UK offshore wind development, having acted as the
primary installation base for Gunfleet Sands, Greater Gabbard and London Array, and in the process having
handled more turbines than any other UK East Coast port. Foundation, turbine and cable transfer operations have
all been carried out at Harwich, with a potentially dedicated storage site of 60 acres immediately adjacent to the
quay, available for these tasks.
2013 saw the first exports of biomass products, while the port has ambitious plans for further expansion into the
offshore oil and gas industry, as well as exploring opportunities in the field of decommissioning.
Transport links
Freight and passenger ro-ro connections to Hoek Van Holland, Rotterdam Europoort and Esbjerg. Freight and
passenger rail connections directly into the port. London Stansted Airport is only 1 hour travelling time, with all
four major London airports being within 2.5 hours. Quick and easy connections to the UK’s trunk road networks.
Owner / Operator
Port Name and
Address
Contact Name
Latitude
Longitude
Water Depth
Harwich Dock Company Limited,
Mann Group
Kings Quay Street, Harwich,
Essex CO12 3JJ
Trevor John
General Manager
01255 245200
[email protected]
www.mannlines.ee/index.html
51° 56’ 52.8” N
General Port Information
A privately owned commercial port which is ISPS compliant,
situated in the Haven making it an idea location for support vessels operating on Gunfleet Sands, Greater Gabbard, Thanet and
London Array. Operated by the Harwich Dock Company Limited
and part of the Mann Group companies.
Quay length
Site Size
Vessel Allowance
1x175m, 1x153m,
1x85m
10 acres
Max. 570 ft LOA
1° 17’ 16.8” E
Max 8.5m
Main Activities Cargo services include stevedoring and cranage, general warehousing and storage with transport and forwarding
arrangements.
Transport links
56
Stansted Airport 96km, Heathrow Airport 182km, Southend Airport 96km, Harwich Town Station 0.5km
EEEGR gratefully acknowledges the support it has received working with our
colleagues at DECC in the compilation and production of this directory.
© Copyright 2014 EEEGR
The copyright on the published individual text, photographs and design of the
companies represented in this guide is held by the respective companies, authors and
designers.
All rights reserved. No part of this guide may be reproduced or transmitted in any
form or by any means, electronic or mechanical, including photocopy, recording or
any information storage and retrieval system without permission in writing from the
copyright owners.
Acknowledgements: Bill Cattanach and Sylvia Buchan at DECC, Foyer Graphics, Charlotte
Simon, Richard Aukland and Chris Anderson at 4C Offshore
Information disclaimer - the information is supplied by the various companies listed in the guide as at March
2014 but for the up to date information please check the relevant company’s website.
Whilst the authors, contractors and publisher have made every effort to ensure that the information in this
guide was correct at the above date all liability whether express or implied is excluded for any liability to any
party for any information which is not accurate, adequate or complete or otherwise a mistake howsoever
arising.
East of England Energy Group
EEEGR
Beacon Innovation Centre
Beacon Park
Gt Yarmouth
NR31 7RA
Tel: 01493 446535
Email: [email protected]
W: www.eeegr.com
Designed by Foyer Graphics
Twitter: @eeegr

Dias nummer 1 - Aalborg University Esbjerg

Resume - Nikhil Jit Singh | Career Portfolio

5. Eclipse Stainless Sinks Brochure

Organized by:

Window Sticker Click Here 522FCR Navy F150

planetary mixer btf-060

meat tenderizer ptd-1

Agenda of the Congress

Steel Day came to Salina on September 19

Presentation