PRODUCT RANGE - Rädlinger Maschinenbau

MECHANICAL ENGINEERING
PRODUCT RANGE
2
CONTENT
04 Company Profile
06 Construction Machine Equipment
08 Mini-Excavator Backhoe Bucket
10 Standard Backhoe Bucket
12 Super Standard Backhoe Bucket
14 Futura Backhoe Bucket
16 Ejector Bucket
17 Conduit and Trench Lining Bucket
18 Skeleton Bucket/Sieve Bucket
20 Heavy Duty Bucket
22 Stone Placing Bucket
23 Ripper Bucket
24 Ripper Tooth
25 Demolition Arm
26 Demolition and Sorting Grab
28 Backhoe Bucket with Tilt Motor
30 Mini-Excavator Trench Clearing Bucket “rigid”
32 Mini-Excavator Trench Clearing Bucket “open”
34 Trench Clearing Bucket with Cylinder
36 Trench Clearing Bucket with Cylinder and 15° tub
37 Trench Clearing Bucket with Tilt Motor
40 Trench Trapezoidal Bucket
41 Tilt Motor with Quick-Coupler System
42 Quick-Coupler without Bucket Conversion
44 Rädlinger Quick-Coupler System “SWP”
46 “Verachtert” Quick-Coupler System
48 Rädlinger Quick-Coupler System “Lehnhoff”
50 Hammer Plate/Conversion Plate/Bucket Roof
51 Tilt Motor JR Tilt 90
55 Rädlinger Tilt Motor
58 Rädlinger Dragline Bucket
60 Light-Material Loading Shovel
62 Standard Loading Shovel
64 Clamp Shovel
65 Heavy Duty Shovel
66 High-Tip Shovel
68 Skeleton Shovel
69 Heavy Duty Fork
70 Pallet Fork
72 Quick-Coupler Systems Wheel Loader
74 Special Designs
76 Regeneration and Repair
78 Wear and Spare Parts
80 Contract Manufacturing
82 Steel Construction
3
Company Profile
“Nothing is impossible!” With this cantral idea, Josef
Rädlinger Sr. laid the first stone for a promising future in
Cham, Upper Palatinate in 1963. Continuous expansion of
the product range and company departments characterised the success story from the start as a gravel dredging
and haulage company to a broadly positioned and globally
active group of companies.
Today, the Rädlinger Group has around 1,200 employees
at several German and international locations.
The company areas include the divisions construction,
plant and machinery construction, trenchless pipe rehabilitation and solar installations. The company’s in-house
vocational training centre BBZ makes an important contribution to the education and training of specialists in the
region. In 2012, the family-run company won the „Award
for Medium-sized Companies“ - a prize for the positive
development of the company, security of jobs and regional
commitment, among other things.
Rädlinger Maschinen- und Anlagenbau GmbH
The mechanical engineering division of Rädlinger is made
up of the areas of construction machinery equipment,
steel construction and contract manufacturing. The departments benefit mutually from the great know-how
4
and experience of the employees, as well as the modern
equipped machine pool on more than 17,000 m2. In 1988,
the company division was formed as a second pillar of the
company group. Ideas for the development and optimisation of attachments for construction equipment arose
from the practical experience of the Rädlinger construction
company.
Today, the mechanical engineering company is among the
leading construction machine suppliers in the Germanspeaking area and customers throughout Europe benefit
from the patented Rädlinger attachments. Excavator buckets, loading shovels, quick-coupler systems, tilt motors
and other innovative products are developed and produced to the highest quality standards at the company headquarters in Cham, Upper Palatinate.
The broad range of services is completed by the regeneration and repair of construction machine equipment of
all kinds, as well as a comprehensive range of wear and
spare parts.
Additionally, Rädlinger is also a specialist in various steelwork constructions. From development to production
through to installation, the department is a competent
partner in implementing individual components and complete projects. Rädlinger Maschinen- und Anlagenbau also
supports external companies experiencing staff or machinery bottlenecks with contract manufacturing or the complete production of assemblies.
Our strengths are our advantages:
• First-class customer care
• Practice-oriented order processing
• Customer-oriented engineering
• Innovative solutions
• State-of-the-art production
• Efficient logistics
• Convincing product quality
5
Construction Machine Equipment
Only through a high-quality attachment, which is optimally complemented with the carrier device, can a construction machine develop its full potential. Performance
and efficiency depend not only on the features and the
power of the excavator or wheel loader, but crucially on
the quality of the equipment. Durability and perfect application behaviour are the crucial factors which Rädlinger
therefore commits itself to as the highest goal at each step.
Innovation & Performance
Rädlinger Maschinen- und Anlagenbau was never a company to rest on its laurels. The strive for perfection, which
is deeply ingrained in the corporate culture, stimulates
new developments and drives forward ideas to optimise
existing products.
The company’s planning and development department,
therefore, always works at the cutting edge of matters concerning technology, materials and software-based design.
Always with the goal in mind of ensuring the efficiency
and lifetime of the attachments, and increasing these to a
maximum. In addition to traditional calculations, virtual simulations and software-based FEM calculations are used
for this, through which the forces which affect the components in reality can be displayed. Potential weaknesses, as
well as the potential for weight and material savings or for
optimisations of volumes and application behaviour, can
already be identified in the development phase.
6
Product Diversity & Service
The innovative strength is the reason that Rädlinger produces customised designs in addition to proven standard
solutions, and implements individual customer requirements for single or series production.
The product range includes all-round tools with various
application areas, as well as special tools for special requirements, and ranges from attachments for mini-excavators
to large excavators with 300 tons of operating weight.
In addition to providing individual product consultation
and planning in close coordination with the customers,
Rädlinger Maschinen- und Anlagenbau also stands by
their customers and other interested parties as a supplier
of wear and spare parts, and as a partner for repairs or
regeneration.
Competence & Quality
A high-quality product can only be developed if the entire
process for this project is coordinated from the beginning
on.
This applies to the development of products, the purchase
and testing of materials, the production and assembly of
components and to quality control.
Here, the high level of expertise, know-how and experience of the staff at Rädlinger are just as critical a success
factor as the exclusive use of high-quality materials and
high-strength steels in the particularly stressed areas.
“Our competitive advantage is the indispensable and close linking of experience and knowledge
with practice. A high degree of awareness of the
requirements of various application areas and a
keen sense for different materials conduct the entire process of product development from development to optimisation through to production.”
Werner Rädlinger, Managing Director
7
Mini-Excavator Backhoe Bucket
Application
Based on its high performance and bucket quality, the backhoe bucket
for mini-excavators is most suitable for collecting, transporting, lifting
and emptying soil and medium-weight ground material in landscaping
and at construction sites with smaller construction areas.
PROFILE
Features
• Bolt tooth removable for cable work
• Optically identical shape to the large
bucket
• Very stable and robust design
• Double-edged box
• Protruding base to the side
• Cutting edge in HB 400
• From class 0,4 base in HB 400
• Class 0,5/0,6 with a blade size of
20 x 150 mm
• Tapering per side 2.5°
• Welded nose for bucket transport
Extra equipment
• Load hook 2 t, 3 t
• Front-insert blade
TECHNICAL
DETAILS
Class 0,2 (approx. 1 - 1.8 t)
8
Class 0,3 (approx. 1.6 - 2.6 t)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
220
23
2
38
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
250
26
2
32
300
46
3
52
300
32
3
37
400
64
3
60
400
45
3
42
500
83
4
68
500
57
4
49
600
102
4
76
600
70
4
55
700
120
5
84
E
Class 0,4 (approx. 2.6 - 3.5 t)
Class 0,5 (approx. 3.5 - 5 t)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
300
58
3
64
300
72
2
72
400
82
3
73
400
103
3
84
500
106
4
82
500
134
4
96
600
130
4
91
600
165
4
106
700
155
5
100
700
196
5
118
800
179
5
109
800
227
5
128
Class 0,6 (approx. 4.8 - 6 t)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
300
77
2
79
400
112
3
92
500
146
4
105
600
180
4
115
800
248
5
139
1000
316
5
160
9
Standard Backhoe Bucket
Application
With the standard backhoe bucket, the user has a diverse, all-round device for collecting, transporting, lifting and emptying soil and mediumweight ground material.
PROFILE
Features
• Robust, high-strength bucket, so difficult
tasks are also no problem
• Fitted by default with Bofors loader tooth
system
• Base in HB 400 excluding transverse wear
strips
• Cutting edge in HB 400
• Protruding base to the side
• Tapering per side 2.5°
• Welded nose for bucket transport
Extra equipment
• Load hook 5 t
• Front-insert blade
TECHNICAL
DETAILS
Class 0,7 (approx. 6 - 8 t)
10
Class 0,8 (approx. 8 - 10 t)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
325
105
2
119
325
127
2
133
400
136
3
132
400
164
3
148
500
176
3
146
500
213
3
164
600
218
4
165
600
263
4
184
800
299
4
194
800
362
4
218
900
339
5
213
900
411
5
239
1000
380
5
228
1000
460
5
256
E
Class 0,9 (approx. 10 - 12 t)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
325
136
2
151
400
177
3
167
500
232
3
186
600
287
4
209
800
396
4
248
900
451
5
271
1000
506
5
290
1100
561
5
310
1200
616
6
333
11
Super Standard Backhoe Bucket
Application
The super standard backhoe bucket is suitable for collecting, transporting, lifting and emptying very large volumes of soil and mediumweight ground material.
PROFILE
Features
• Bevelled cutting edge in HB 400
• Protruding base to the side
• Tapering per side 2.5°
• Transverse wear strips HB 500
• CAT J-System
Extra equipment
• Load hook 5 t, 10 t
• Front-insert blade
• All standard toothed systems
available on request
TECHNICAL
DETAILS
12
Class I (approx. 11 - 17
t)
Class II (approx. 19 - 23
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
600
390
3
390
600
450
3
510
800
530
4
465
800
600
4
590
1000
675
4
535
1000
775
4
690
1200
820
5
615
1200
950
5
775
1400
960
5
685
1400
1100
5
870
t)
E
Class III (approx. 23 - 29 t)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
800
800
4
810
1000
1000
4
930
1200
1200
5
1060
1400
1400
5
1180
1600
1600
6
1300
Class III/IV (approx. 29 - 38 t)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
800
950
3
1140
1000
1180
3
1300
1200
1420
4
1490
1400
1660
4
1650
1600
1950
5
1885
13
Futura Backhoe Bucket
Application
The “Futura” backhoe bucket is the result of consistent further development
of the super standard backhoe bucket in terms of higher performance, best
filling and emptying behaviour and less wear. It is suitable for collecting,
transporting, lifting and emptying soil and medium-weight ground material.
PROFILE
Features
• Blade in usual high quality; HB 400 in
conjunction with toothed system, HB 500
without teeth
• Lower side cutting edge and protective
siding combined, in HB 400
• Protruding base in HB 400 as standard for
highest durability
• Tapering per side 2.5°
• CAT J-System or Bofors tooth systems
• Lower operating costs
Extra equipment
• Load hook 5 t, 10 t
• Front-insert blade
• Transverse wear strips
• All standard toothed systems available
on request
TECHNICAL
DETAILS
14
Class I (approx. 11 - 17
t)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
400
190
2
301
500
260
3
346
600
340
3
379
700
410
4
424
800
490
4
458
1000
650
4
546
1200
810
5
624
E
Class I/II (approx. 15 - 19
Class II (approx. 19 - 23 t)
t)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
400
230
2
345
400
240
2
459
500
310
3
393
500
340
3
503
600
390
3
428
600
440
3
544
700
480
4
475
800
640
4
637
800
570
4
510
1000
850
4
719
1000
760
4
580
1200
1060
5
813
1200
950
5
662
1400
1270
5
895
1400
1140
5
735
1600
1480
6
989
Class III (approx. 23 - 29 t)
Class III/IV
(approx. 29 - 38 t)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
Cutting width
in mm
Capacity
SAE/L
Number of
teeth
Weight
(approx. kg)
600
490
3
680
800
860
3
1070
800
710
4
796
1000
1140
3
1206
1000
940
4
902
1200
1430
4
1375
1200
1180
5
1022
1400
1730
4
1510
1400
1420
5
1125
1600
2030
5
1646
1600
1660
6
1244
1800
2330
5
1815
15
Ejector Bucket
Application
Narrow backhoe buckets below 400 mm cutting width are frequently
produced as ejector buckets for use in the cabling or drainage sector.
Adhering materials such as loam, clay, humus, etc. are ejected by hydraulically activating an ejector shutter.
PROFILE
Features
• Available with all standard quick-coupler
systems and direct attachments
• Hydraulic actuation using grabber
slewing gear
• With straight blade
Extra equipment
• 100% HB 400
• Load hook
• Hose package
• Can be equipped with different toothed
systems
TECHNICAL
DETAILS
16
Class
Cutting
width in mm
Capacity
SAE/L
Height (without
suspension)
Weight (approx. kg)
0,3/0,5
300
55
680
120
0,3/0,5
400
80
680
135
0,7/0,9
300
90
890
180
0,7/0,9
400
120
890
220
I
300
190
1200
380
I
400
260
1200
420
II
300
280
1480
460
II
400
385
1480
490
E
Conduit and Trench Lining Bucket
Application
The special bucket shape for use in conduit and trench-lining meets the
requirements of a professional excavator operator. Even areas of conduits that are deep and difficult to access can be reached.
PROFILE
Features
• Available in various designs (standard,
heavy duty)
• Short bulge enables optimum lowering
through the conduit formwork
• Protruding base to the side
• Tapering per side 2.5°
• Steeply installed blade for grabbing ma terial in deep conduits or corners that are
difficult to access
• Extended bucket opening by 15° for
practically vertical cutting
Extra equipment
• Ideally equipped with single-bar tooth holder system to create a flat base
• Front-insert blade
17
Skeleton Bucket/Sieve Bucket
Application
This special tool is exceptionally suited for loading and sorting work.
Skeleton buckets are mainly used for filtering out rock and paving stones
and for recycling building rubble.
PROFILE
Features
• Robust bucket with good price/perfor mance ratio
• High-strength so difficult applications are
also no problem
• Versatile for all-round use
• Equipped with CAT J-System or Bofors
loader toothed system
• Cutting edge in HB 400
• Customised bar spacing;
Available with skeleton base or bars
Extra equipment
• 100% HB 400
• Load hook
• Front-insert blade Class
TECHNICAL
DETAILS
18
Class (t)
Cutting width in
mm
Capacity SAE/L
0,2
500
57
0,3
800
140
0,4
800
179
0,5
800
227
0,6
800
248
0,7
800
299
0,8
800
362
0,9
1000
506
E
Class (t)
Cutting width in
mm
Capacity SAE/L
I
800
490
I
1000
650
I
1200
810
I
1400
970
I/II
800
570
I/II
1000
760
I/II
1200
950
I/II
1400
1140
II
800
640
II
1000
850
II
1200
1060
II
1400
1270
III
1000
940
III
1200
1180
III
1400
1420
III
1600
1660
IV
1800
3230
19
Heavy Duty Bucket
Application
The Rädlinger heavy duty bucket is a popular product with professional
users in the mining and demolition industry for heavy-duty use with
high break-out forces and high levels of wear. Best filling characteristics
ensure high excavator performance and low fuel consumption.
PROFILE
Features
• Customised production and fittings
possible with different toothed systems
and blades
• Extremely robust construction design and
low net weight through the use of high quality materials and high-strength steels
• Blade and side cutting made of special steel
• Welded blade reinforcement in front and
side cutting edge reinforcement below
• Protective siding and transverse wear
strips in HB 400/500
• Heavy-duty and deep side cutting for
force transfer from the box to the blade
• Slightly protruding tooth holder at the
corners and rear-narrowing bucket body
for optimum free cutting of the bucket
Extra equipment
TECHNICAL
DETAILS
Class I (approx. 11 - 17
20
• 100% HB 400
• Load hook 5 t, 10 t, 18 t
• Ball groove
• Various reinforcement stages
• Intermediate sizes and special designs
available on request
Class II (approx. 18 - 22
t)
t)
Cutting
width in mm
Capacity
SAE/L
Number
of
teeth
Weight
(approx.
kg)
400
340
2
549
Cutting
width in mm
Capacity
SAE/L
Number
of
teeth
Weight
(approx.
kg)
400
270
2
334
500
450
3
500
350
3
377
600
560
600
430
3
410
800
700
520
4
453
800
600
4
1000
770
1200
940
Class III (approx. 23 - 29 t)
Cutting
width in mm
Capacity
SAE/L
Number
of
teeth
Weight
(approx.
kg)
610
600
830
3
939
3
656
800
1100
4
1100
770
4
751
1000
1380
4
1229
1000
990
4
860
1200
1650
5
1405
485
1200
1210
5
966
1400
1930
5
1535
4
557
1400
1430
5
1058
1600
2200
6
1699
5
633
1600
1640
6
1165
1800
2480
6
1830
E
Class III/IV (approx. 30 - 38 t)
Class IV (approx. 38 - 50 t)
Cutting
width in mm
Capacity
SAE/L
Number
of
teeth
Weight
(approx.
kg)
Cutting
width in mm
Capacity
SAE/L
Number
of
teeth
Weight
(approx.
kg)
800
1260
3
1370
1000
1790
3
1711
1000
1580
3
1535
1200
2150
4
1926
1200
1900
4
1720
1400
2510
4
2092
1400
2220
4
1875
1600
2870
4
2258
1600
2540
5
2060
1800
3230
5
2473
1800
2860
5
2215
2000
3590
5
2640
Class V
Class VI (approx. 70 - 100 t)
(approx. 50 - 70 t)
Cutting
width in mm
Capacity
SAE/L
Number
of
teeth
1400
4010
3
Cutting
width in mm
Capacity
SAE/L
Number
of
teeth
1400
3190
4
1600
4590
4
1600
3640
4
1800
5170
4
1800
4100
4
2000
5730
4
2000
4550
5
2200
6300
5
2200
5000
5
2400
6870
5
2400
5460
6
2600
7450
5
Class VI s (approx. 101 - 130 t)
Cutting width and capacity subject
to agreement.
21
Stone Placing Bucket
Application
The stone placing bucket is especially characterised by its extremely far
protruding cutting edge. As a result, the optimum collection and laying
of stones, blocks of stones and quadrants is possible without any problems or tilting.
PROFILE
Features
• Far forward-protruding blade
• Side cutting edge recessed far back
• Base-sided fixing of stone-laying protrusi-
ons for the fine placement of stones
• Extremely robust construction design made of high-quality materials
• Blade and side cutting made of special steel
• Welded blade reinforcement in front and side cutting edge reinforcement below
• Protective siding and transverse wear strips in HB 400/500
• Heavy-duty and deep side cutting for force transfer from the box to the blade
• Slightly protruding tooth holder at the corners and rear-narrowing bucket body for optimum free cutting of the bucket
22
E
Ripper Bucket
Application
The ripper bucket is suitable for the most difficult tear-out and demolition tasks with extreme break-out forces and for direct extraction with
increasing restrictions on the use of explosives as an alternative to
traditional drilling and explosive operations.
PROFILE
Features
• Similar to a heavy-duty bucket but with
thicker walling and heavier toothed system
• Extremely robust construction design and
low net weight through the use of high quality materials and high-strength steels
• Blade and side cutting made of special steel
• Welded blade reinforcement in front and
side cutting edge reinforcement below
• Protective siding and transverse wear
strips in HB 400/500
• Heavy-duty and deep side cutting for force
transfer from the box to the blade
• Slightly protruding tooth holder at the
corners and rear-narrowing bucket body
for optimum free cutting of the bucket
• Reinforcing bar in the centre
• Extreme protruding central tooth acts as a
ripper tooth
TECHNICAL
DETAILS
Class
Volume m³
IV - 45 t
1.8
V - 65 t
2.5
VI - 90 t
3.5
VI - 120 t
4.5
VII - 185 t
6.5
VII - 260 t
9
Tooth system
All standard toothed systems available
on request. Central tooth one size bigger
than outer teeth.
23
Ripper Tooth
Application
The ripper tooth is used for breaking up the hardest types of rock (e.g.
limestone, slate, nagelfluh layers, slag, basalt and granite).
PROFILE
Features
• Bundles the entire force of the excavator
on one tooth tip
• Can be combined with standard tooth
systems
• Very robust construction design from
deep strut
Extra equipment
• Wear reinforcement on the strut
• Supporting plate
TECHNICAL
DETAILS
24
Class
Operating weight
0,2/0,3/0,4
- 3.5 t
0,5/0,6
-6t
0,7
-8t
0,8
- 10 t
0,9
- 12 t
I
- 15 t
II
- 23 t
III
- 29 t
III/IV
- 38 t
IV
- 50 t
V
- 70 t
VI
- 100 t
VI s
- 130 t
VII
- 185 t
VII s
- 260 t
E
Demolition Arm
Application
Use of the demolition arm extends the application area and range of
hydraulic excavators enormously and is thus a particularly useful tool in
the demolition of buildings.
PROFILE
Features
• Rigid or mechanically adjustable
• Various lengths available
• Various head forms available
• Deflector plate
25
Demolition and Sorting Grab
Application
PROFILE
The grab is suitable for loading, sorting and shifting even the most
heavy-duty materials. Demolition, dismantling and gutting work can be
carried out with precision and force.
Features
• Low construction height and wide opening
• Very high closing and retaining force
• Cylinder end position damping for long
service life
• High strength: Shells from Hardox®; main frame made of high-strength steel
• Low wear due to high-quality components
• Shells of various widths easily replaceable
• Rotating design: High torque through two
drive motors
• Optional: Hardox® side plates
TECHNICAL
DETAILS
Not rotatable demolition and sorting grab with hole pattern
26
Type
Excavator Class
(to.)
Weight
(kg)
Total
height
(mm)
Shell
width
(mm)
Opening
width
(mm)
Capacity
(litres)
Closing
force
(kN)
Operating pressure
Gripper
(max.) (bar)
Oil Volumetric
flow Gripper
(L/min)
JG0-30
0.7 - 1.2
n.a.
n.a.
300
600
30
6
300
15
JG1-70
1.2 - 4
130
760
400
900
70
18
300
25
JG1-100
1.2 - 4
145
760
550
900
100
18
300
25
JG2-150
4-9
293
830
500
1500
150
24
300
40
JG2-200
4-9
311
830
600
1500
200
24
300
40
JG2-300
4-9
357
830
850
1500
300
24
300
40
JG3-400
12 - 20
693
1000
700
1900
400
46
350
120
JG3-500
12 - 20
715
1000
850
1900
500
46
350
120
JG3-600
12 - 20
745
1000
1050
1900
600
46
350
120
JG3-700
12 - 20
767
1000
1200
1900
700
46
350
120
JG4-700
18 - 32
1230
1250
950
2100
700
84
350
160
JG4-800
18 - 32
1300
1250
1100
2100
800
84
350
160
JG4-900
18 - 32
1370
1250
1250
2100
900
84
350
160
E
Rotatable demolition and sorting grab with hole pattern
Type
Excavator
Class
(to.)
Weight
(kg)
Total
height
(mm)
Shell
width
(mm)
Opening
width
(mm)
Capacity
(litres)
Closing
force
(kN)
Operating
pressure
DM
(max.)
(bar)
Operating
pressure
Gripper
(L/min)
Oil Volumetric
flow DM
(L/min)
Oil Volumetric flow
Gripper
(L/min)
JRG0-3
0.7 - 1.2
75
600
300
600
30
6
150
300
5
15
JRG1-70
1.2 - 4
165
815
400
900
70
18
150
300
10
25
JRG1-100
1.2 - 4
180
815
550
900
100
18
150
300
10
25
JRG2-150
4-9
350
1000
500
1500
150
24
150
300
15
40
JRG2-200
4-9
370
1000
600
1500
200
24
150
300
15
40
JRG2-300
4-9
415
1000
850
1500
300
24
150
300
15
40
JRG3-400
12 - 20
873
1230
700
1900
400
46
210
350
25
120
JRG3-500
12 - 20
895
1230
850
1900
500
46
210
350
25
120
JRG3-600
12 - 20
925
1230
1050
1900
600
46
210
350
25
120
JRG3-700
12 - 20
947
1230
1200
1900
700
46
210
350
25
120
JRG4-700
18 - 32
1460
1500
950
2100
700
84
210
350
35
160
JRG4-800
18 - 32
1530
1500
1100
2100
800
84
210
350
35
160
JRG4-900
18 - 32
1600
1500
1250
2100
900
84
210
350
35
160
JRG5-1000
32 - 50
2750
1720
1200
2300
1000
90
210
350
35
240
JRG5-1100
32 - 50
2850
1720
1300
2300
1100
90
210
350
35
240
JRG5-1300
32 - 50
2970
1720
1500
2300
1300
90
210
350
35
240
27
Backhoe Bucket with Tilt Motor
Application
The backhoe bucket with tilt motor is used in hydraulic construction and
landscaping. Through the tilt function, additional work on embankments
and the removal of foundation soils is possible independent of the
excavator footprint.
PROFILE
Features
• Ideally combines the shape of the conven tional backhoe and the tilting trench-clea ring bucket
• Protruding base to the side
• Tapering per side 2.5°
• Fitted with straight blade and transverse
wear strips
• Problem-free, safe and maintenance-free
operation through use of the tilt motor
Extra equipment
• 100% HB 400
• Drainage slots
• Load hook
• Hose package
• Reversible screw-on blade
• Embankment edge
• Special seal
TECHNICAL
DETAILS
Tilt Motor Cl. 0,9 (Carrier machines - 10 t)
28
Tilt Motor Cl. I (Carrier machines - 12 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
1000
350
555
1200
400
600
1400
450
642
1600
500
686
Tilt Motor Cl. I (Carrier machines - 14 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
800
330
600
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
800
300
451
1000
435
660
1000
350
494
1200
540
715
1200
400
539
1400
645
770
1400
450
581
1600
750
830
E
Tilt Motor Cl. II S (Carrier machines - 19 t)
Tilt Motor Cl. II S (Carrier machines - 23 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
800
435
777
800
540
928
1000
560
836
1000
690
1009
1200
680
895
1200
840
1091
1400
800
955
1400
990
1173
1600
920
1014
1600
1140
1254
Tilt Motor Cl. III L (Carrier machines - 26 t)
Tilt Motor Cl. III (Carrier machines - 29 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
1200
1050
1263
1200
1200
1513
1400
1250
1315
1400
1420
1572
1600
1450
1366
1600
1630
1632
1800
1650
1418
1800
1850
1691
Tilt Motor Cl. IV (Carrier machines - 38 t)
Tilt Motor Cl. V (Carrier machines - 50 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
1400
1700
2365
1600
2100
3100
1600
2000
2500
1800
2450
3250
1800
2300
2635
2000
2800
3400
2000
2600
2770
2200
3150
3550
29
Mini-Excavator Trench Clearing Bucket “rigid”
Application
The trench clearing bucket is used for collecting, transporting, lifting and
emptying soil and lightweight ground material (light and medium-duty
use). The bucket is exceptionally suited for trench and trough construction, for the creation of embankments and shoulders, for grading and
trench clearing and for the creation of complex ground forms.
PROFILE
Features
• Open 15° tub for easy emptying
• Based on missing centre sickle, also
suitable for sticky material and optimum
for dosing
• Protruding base to the side
• From class 0,3 base in HB 400
• Cutting edge made of blade steel HB 500,
tapering per side 4°, therefore ideal in combination with JR Tilt 90
• With drainage slots
Extra equipment
• 100% HB 400
• Embankment edge
• Drainage slots
• Load hook
TECHNICAL
DETAILS
Class 0,3 (approx. 1.6 - 2.6 t)
30
Class 0,2 (approx. 1 - 1.8 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
850
62
62
1000
73
73
1200
88
88
Class 0,4 (approx. 2.6 - 3.5 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
1000
95
92
1000
95
92
1200
115
106
1200
115
106
1400
135
120
1400
135
120
E
Class 0,5 (approx. 3.5 - 5 t)
Class 0,6 (approx. 4.8 - 6 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
1200
157
131
1200
157
131
1400
184
148
1400
184
148
1600
210
166
1600
210
166
31
Mini-Excavator Trench Clearing Bucket “open”
Application
The trench clearing bucket is used for collecting, transporting, lifting and
emptying soil and lightweight ground material (light and medium duty).
The bucket is exceptionally suited for trench and trough construction,
for the creation of embankments and shoulders, for grading and trench
clearing and for the creation of complex ground forms.
PROFILE
Features
• Open 15° tub for easy emptying
• Based on missing centre sickle, also
suitable for sticky material and optimum
for dosing
• Tilt movement 2 x 45°
• Protruding base to the side
• Tapering per side 2°
• With drainage slots
Extra equipment
• 100% HB 400
• Embankment edge
• Drainage slots
• Load hook
• Hose package
• Cylinder protection
• Optional protected load retaining valve integrated into the cylinder
TECHNICAL
DETAILS
Class 0,3 (approx. 1.6 - 2.6 t)
Class 0,2 (approx. 1 - 1.8 t)
32
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
850
62
102
1000
95
127
1000
73
113
1200
115
139
1200
88
124
1400
135
150
E
Class 0,4 (approx. 2.6 - 3.5 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
1000
95
127
1200
115
139
1400
135
150
Class 0,5 (approx. 3.5 - 5 t)
Class 0,6 (approx. 4.8 - 6 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
1200
157
168
1200
157
168
1400
184
182
1400
184
182
1600
210
196
1600
210
196
33
Trench Clearing Bucket with Cylinder
Application
The trench clearing bucket is used for collecting, transporting, lifting and
emptying soil and lightweight ground material (light and medium-duty
use). The bucket is exceptionally suited for trench and trough construction, for the creation of embankments and shoulders, for grading and
trench clearing and for the creation of complex ground forms.
PROFILE
Features
• Generously dimensioned main pivot head
bolts ensure long durability and a high
level of functional stability
• Robust frame for high level of stability
and protects the hydraulics system
• Tilt movement 2 x 45° through two ge nerously dimensioned hydraulic cylinders
• Side-protruding base in HB 400
• With drainage slots
Extra equipment
• 100% HB 400
• Embankment edge
• Load hook
• Hose package
• Reversible screw-on blade
• Special forms according to customer wishes
possible
• Load retaining valve
TECHNICAL
DETAILS
Class 0,8 (approx. 8 - 10 t)
34
Class 0,7 (approx. 6 - 8 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
1200
200
299
1400
234
317
1600
267
335
1800
300
353
2000
335
372
Class 0,9 (approx. 10 - 12 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
1400
280
332
1400
280
332
1600
320
351
1600
320
351
1800
360
370
1800
360
370
2000
400
389
2000
400
389
E
Class I (approx. 11 - 15 t)
Class I/II (approx. 15 - 19 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
1800
440
575
1800
600
633
2000
495
605
2000
650
662
2200
550
630
2200
700
691
Class II (approx. 19 - 23 t)
Cutting width in
mm
Capacity SAE/L
Class III (approx. 23 - 29 t)
Weight
(approx. kg)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
1800
800
901
2100
1180
1530
2000
900
934
2200
1260
1560
2200
1000
969
2400
1430
1620
2400
1100
1003
2600
1600
1680
Class III/IV (approx. 29 - 38 t)
Cutting width in
mm
Capacity SAE/L
Weight
(approx. kg)
2100
1420
1729
2200
1515
1761
2400
1700
1833
2600
1885
1895
2800
2070
1958
All trench clearing buckets are also available as a „rigid“
version.
35
Trench Clearing Bucket with Cylinder and 15° Tub
Application
Based on the additional functions and 15° tub, the special version of
the trench clearing bucket with cylinder (from 11 t) is most suitable for
demanding operations in terms of materials and efficiency.
PROFILE
Features
• Open 15° tub for easy emptying
• Hydraulic hose routing close to swivel
head, so no tearing off
• Piston rod protection
Extra equipment
• 100% HB 400
• Embankment edge
• Load hook
• Hose package
• Reversible screw-on blade
• Special forms according to customer wishes
possible
• Load retaining valve
• With some cutting widths, also available
without centre sickle
TECHNICAL
DETAILS
Class I/II (approx. 15 - 19 t)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
1800
440
575
2000
495
605
2200
550
630
Class II (approx. 19 - 23 t)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
1800
600
633
1800
800
901
2000
650
662
2000
900
934
2200
700
691
2200
1000
969
2400
1100
1003
Class III/IV (approx. 29 - 38 t)
Class III (approx. 23 - 29 t)
36
Class I (approx. 11- 15 t)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
2100
1420
1729
2100
1180
1530
2200
1515
1761
2200
1260
1560
2400
1700
1833
2400
1430
1620
2600
1885
1895
2600
1600
1680
2800
2070
1958
E
Trench Clearing Bucket with Tilt Motor
Application
This type of bucket is the German market leader among tilt motor
buckets. As a high-performance bucket, it enables unrestricted and
maintenance-free work on both sides up to a 45° tilt position.
PROFILE
Features
The harsh conditions of the construction sector have proven to be detrimental to the trench clearing buckets that were found in the market.
Damaged cylinders, worn tilt heads and bushings, jammed bolts due to
lack of lubrication and, finally, downtime due to damaged or torn off
hydraulic hoses try the nerves of the market leader and cost money.
• Robust and compact tilt motor replaces
traditional tilt head
• Hydraulic hoses are directly fed to the tilt
motor to rule out damage
• The motor is fully maintenance-free as a
result of lubrication over the hydraulic oil
of the grapple slewing gear
• Bolts, cylinder and cylinder covering not
needed
• Screw-retained suspension for changing for various carrier machines
• Highest possible Rotation and rotation
torque
• Integrated pressure relief valve prevents
overload of the tilt motor
• With drainage slots
• Protruding base to the side from
Class 0,7 base in HB 400
• Only provider with cast housing
Extra equipment
• Special seal to protect the standard
seal of the motor for use underwater or
in fine-sand ground available on re quest for the tilt motor classes II S and III L
37
Trench Clearing Bucket with Tilt Motor
TECHNICAL
DETAILS
Class 0,2 (approx. 1 - 1.8 t)
Class 0,3 (approx. 1.6 - 2.6 t)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
800
65
132
800
75
155
1000
70
145
1000
95
170
1200
85
157
1200
115
185
1400
100
169
1400
135
200
Class 0,4 (approx. 2.6 - 3.5 t)
Class 0,5 (approx. 3.5 - 5 t)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
800
75
155
1000
130
245
1000
95
170
1200
157
262
1200
115
185
1400
184
279
1400
135
200
1600
211
296
1800
238
313
Class 0,6 (approx. 4.8 - 6 t)
38
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
1000
130
245
Class 0,7 (approx. 6 - 8 t)
1200
157
262
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
1400
184
279
1400
234
333
1600
211
296
1600
267
353
1800
238
313
1800
300
373
Class 0,8 (approx. 8 - 10 t)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
1400
280
420
1600
320
443
1800
360
466
Class 0,9 (approx. 10 - 12 t)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
1400
280
481
1600
320
506
1800
360
531
Class I (Carrier machines - approx. 14 t)
Class II (Carrier machines - approx. 19 t)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
1800
440
626
1800
600
833
2000
495
658
2000
650
868
2200
550
690
2200
700
903
2400
605
722
2400
750
938
Class II S (Carrier machines - approx. 23 t)
Class III L (Carrier machines - approx. 26 t)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
1800
800
961
2000
1000
1263
2000
900
1002
2200
1125
1315
2200
1000
1043
2400
1250
1366
2400
1100
1084
2600
1375
1418
Class III (Carrier machines - approx. 29 t)
Class IV (Carrier machines - approx. 38 t)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
Cutting width in mm
Capacity SAE/L
Weight (approx. kg)
2000
1100
1515
2000
1330
2090
2200
1260
1572
2200
1515
2160
2400
1430
1632
2400
1700
2245
2600
1600
1691
2600
1885
2325
2800
2070
2395
Tilt motor Cl. V (Carrier machines 50 t) on request
39
Trench Trapezoidal Bucket
Application
The bucket is suitable for the regeneration of shoulders and for forest
path maintenance and the cleaning of clogged-up and silted-up trenches in roads and forest paths. With the trench trapezoidal bucket, a far
higher output per hour and thus higher revenues can be achieved than
with conventional trench clearing buckets.
PROFILE
Features
• Can be rotated 45° by means of a cylinder
• 2 x 45° tilting angle through tilt motor
• Separately adjustable wings to avoid
obstacles for unlimited range of operation
• Embankment angle of 30° to 55° separa tely adjustable on each side
• Base width approx. 400 mm
• Available for excavators of 11 - 20 t appli cation weight
Extra equipment
• Wear package available for forest path
construction
• Rotary movement possible by means of
cylinder or tilt rotator
• Rounded-off front-insert blade
Rigid design
•Bucket also available in rigid design
• Individual profiles and embankment
angles on request
40
E
Tilt Motor with Quick-Coupler System
Application
The combination of the tilt motor and quick-coupler system brings enormous advantages of the tilt motor for several attachment tools. Tools
of all kinds can be attached or replaced in a fast and straightforward
manner and thus benefit from the 2 x 45° tilt function.
PROFILE
Features
• Ideally combines the advantages of the
tilt motors with those of the quick-coupler
• For direct mounting or as a removable tilt unit combined with a quick-coupler system
• Very lean and compact construction
design, ideal for narrow attachments in
conduit construction
41
Quick-Coupler without Bucket Conversion
Application
This quick coupler allows the attachment of all standard buckets without
conversion. In addition, it is possible to reverse the bucket and use it as
a face shovel.
PROFILE
Features
• No bucket conversion required
• Bucket can be mounted on the excavator
at any time
• No wear from continuous force closure
• Compact construction design changes the
break-out force only minimally
• Secured through BG certification
• The quick-coupler system can be quickly
and effortlessly manually locked by ratchet
Extra equipment
• Load hook
TECHNICAL
DETAILS
“Mechanical” Design
42
Class
Operating weight (t)
Weight
(approx. kg)
05
-5
07
-7
09
-10
130
I
-18
250
II
-23
340
III
-30
440
IV
-45
E
Using the quick-coupler system is worth it:
Low conversion times increase profit, maximise the use of your bucket
and do not interrupt work for unnecessarily long periods.
Grapple Adapter
Class
Operating weight (t)
Weight
(approx. kg)
09
-10
50
I
-16
320
II
-22
540
III
-30
43
Rädlinger Quick-Coupler System “SWP”
Application
The “SWP” quick-coupler system is especially designed for the toughest
conditions, such as quarrying. The bucket roof is locked using fixed
hooks and a movable clamping unit in the quick-coupler. The hydraulic
quick-coupler system is operated comfortably from the push of a button
from the driver’s cab.
PROFILE
Features
• Parts subject to high stress (bucket bolts,
hooks and unit faces) generously dimensi oned and made of hardened steel
• High surface pressure free from backlash
Safety devices:
• Cylinder continuously pre-stressed through
continuous pressure
• Lockable safety switch and warning buzzer
for the driver’s cab
• Safety-tested by BG and approved system
• Emergency unlocking possible externally if
the excavator hydraulics fail
• Locking display
Extra equipment
• Hydraulic attachment kit:
Valve control block with adjustable
locking and unlocking pressure
TECHNICAL
DETAILS
Mechanical Design
Class
Operating weight (t)
Weight
(approx. kg)
SWP-1
- 22
250
SWP-2
- 33
350
SWP-3
- 40
450
Class
Operating weight (t)
Weight
(approx. kg)
SWP-0,9
-12
180
SWP-4
- 50
850
SWP-1
-22
250
SWP-5
- 70
950
SWP-2
-33
350
SWP-6
- 100
450
SWP-6 s
- 130
SWP-3
44
Hydraulic Design
-40
E
Grapple Adapter
Class
Operating weight (t)
Weight
(approx. kg)
SWP-1
- 22
160
SWP-2
- 33
SWP-3
- 40
45
“Verachtert” Quick-Coupler System
Application
With this system, hydraulic excavators can be re-functioned to become
universally-usable carrier machines for the widest range of tasks.
Many orders can be handled with far less machines and outlay cost,
since this system enables rapid replacement of working equipment such
as buckets, grapples, shears, milling machines or hammers.
PROFILE
Features
• Mechanical activation (spindle version)
• Hydraulic activation enables the driver to
receive and place the working equipment
in just seconds without leaving the
driver’s cab
• Narrow or normal (width) design
• Compatible with original “Verachtert”
system
TECHNICAL
DETAILS
46
Excavator/Weight (t)
Marking
Excavator/Weight (t)
Marking
14 - 21
CW 30
-1
CW 00
21 - 28
CW 40
3 - 3,5
CW 05
27 - 40
CW 45
4-9
CW 10
35 - 60
CW 50
9 - 14
CW 20
35 - 60
CW 55
E
47
Rädlinger Quick-Coupler System “Lehnhoff”
Application
As an all-rounder, the optimised quick-coupler system “Lehnhoff” from
Rädlinger is very versatile. Locking through two locking bolts which
engage in a block on the attachment.
PROFILE
Features
• Rapid and secure changing
• Connection of quick-coupler and adapter
via adjusting sheet on SW housing free
from backlash
• Sealed interlocking mechanics, long dura bility and low level of maintenance
• Universal adapter system suitable for all
excavator makes
• Low loss of tear-out strength
Extra equipment
• Certified hydraulic attachment kit:
valve control with adjustable locking and
unlocking pressure for double-acting
quick-coupler cylinder
TECHNICAL
DETAILS
Rädlinger quick-coupler replica
(MS01 - HS40)
48
Type
Weight (approx. kg)
MS01
20
JR-Version
MS03
30
MS08
Grab adapter with cross
joint or arm pipe for
original Grabber Fork
Type
Weight (approx. kg)
JR-Version
MS01
21
95
JR-Version
MS03
27
MS10
200
JR-Version
MS08
60
MS21/HS21
300
JR-Version
MS10
185
MS25/HS25
350
JR-Version
MS20
210
HS40
800
JR-Version
MS21/25
245
E
Robust quick-coupler:
The system is composed of two components: the quick-coupler and the adapter for the attachment. The quick-coupler has a
robust, closed housing with two stable receptacle claws, with which the attachment can be lifted, displaced and positioned
before bolting.
Stable seating in the adapter
The quick-coupler has mechanically finished receptacle and placement surfaces for the adapter. The adapter consists of the
receptacle shaft and the finished crossbar plate with exact dimensional accuracy and high quality finish. After bolting, both
sides form a solid, stable connection.
Mechanically locked:
The quick-coupler can be interlocked effortlessly and quickly with two crossbar bolts and mechanical dead-centre interlocking
simply by using socket spanners.
Hydraulically locked:
A hydraulic cylinder with unblock-capable shut-off valve holds the crossbar bolts securely in position.
Advantages over other manufacturers
•Hook in HB 400
• Back wall adjustable by means of adjusting plate for exact fit (MS10 - HS40)
• Constant application of pressure
Special features
Compatible with original “Lehnhoff” system
49
Hammer Plate/Conversion Plate/Bucket Roof
Application
Hammer plates, conversion plates and bucket roofs are used as connecting parts between attachments (buckets, mounting plates, hammer and
shear plates, grabber adapters, eccentric adapters) and quick-couplers.
PROFILE
Available in all sizes for the following
quick-coupler systems:
•Baumaschinentechnik
•Kewaco
•Lehnhoff
•Liebherr
•Nado
• Oil Quick
•Schaeff
•SMP
•Stury
•Verachtert
•Volvo/Akermann
•Wimmer
•Winkelbauer
50
E
Tilt Motor JR Tilt 90
Application
With the vertical tilt function of the JR Tilt 90 by 2 x 90° work in the
most confined spaces is possible. At the same time, the tilt motor expands the areas of use and performance of mini-excavators, as well as
the efficiency of attachments.
PROFILE
Features
The JR Tilt 90 combines proven Rädlinger
quality and many years of experience with
new features:
With the JR Tilt 90, Rädlinger addresses growing demand in the gardening and landscaping sector, creating an indispensable product which
meets the demands of maximum flexibility, versatility and productivity
of the attachment.
• 2 x 90° tilting angle, limited by a mechani cal stop
• Integrated oil channel for hose-free con trol of hydraulic quick-couplers
• Pressure relief valve secured with 310 bar
for maximum rotary and tightening torque
• System approved and tested by BG for safety
• Compact: optimised installation height
and length
• Size optimised for the respective machine
classes
• Extremely robust and wear-resistant
through the use of high-strength alloys/
nitriding
• Suspension welded for minimum installa tion heights
• Fits on all standard quick-coupler systems
• Protected hydraulic connection points
• Optional hydraulic package for hose feed
for various carrier machines
51
Tilt Motor JR Tilt 90
TECHNICAL
DETAILS
Integrated
swivel channel
JR Tilt 590 (approx. 3.8 - 6 t)
JR Tilt 390 (approx. 1.8 - 3.8 t)
Dimensions (w x h x l):
165 x 145 x 267
Dimensions (w x h x l):
210 x 181 x 325
Weight:
26 kg
Weight:
46 kg
Tilt angle:
180°
Tilt angle:
180°
Torque:
1,200 Nm at 300 bar
Torque:
2,800 Nm at 300 bar
Retention torque:
approx. 2,550 Nm at 300 bar
Retention torque:
approx. 7,100 Nm at 300 bar
Oil requirement:
0.18 ltr./180°
Oil requirement:
0.42 ltr./180°
Operating pressure
210 bar
Operating pressure
210 bar
Max. Operating pressure
310 bar
Max. Operating pressure
310 bar
Build-up recommendations:
Syst. Lehnhoff HS01/HS03
Build-up recommendations:
Syst. Lehnhoff HS03
Syst. Verachtert CW05
52
Syst. Verachtert CW10
Integrated
swivel channel
JR Tilt 790 (approx. 6 - 8 t)
JR Tilt 1090 (approx. 8 - 10 t)
Dimensions (w x h x l):
270 x 232 x 402
Dimensions (w x h x l):
310 x 280 x 450
Weight:
93 kg
Weight:
141 kg
Tilt angle:
180°
Tilt angle:
180°
Torque:
6,200 Nm at 300 bar
Torque:
11,750 Nm at 300 bar
Retention torque:
approx. 14,200 Nm at 300 bar
Retention torque:
approx. 22,800 Nm at 300 bar
Oil requirement:
0.95 ltr./180°
Oil requirement:
1.89 ltr./180°
Operating pressure
210 bar
Operating pressure
210 bar
Max. Operating pressure
310 bar
Max. Operating pressure
310 bar
Build-up recommendations:
Syst. Lehnhoff HS08
Build-up recommendations:
Syst. Lehnhoff HS08
Syst. Verachtert CW10
53
Tilt Motor JR Tilt 90
Hydraulikanbausatz
Hydraulikanbausatz
Excavator side for double-acting
quick-coupler cylinder
Excavator side for single-acting
quick-coupler cylinder
A
B
3
A
B
1
2
T
A,B: P: T: 1: 2: 3: Hydraulic package
for outside hosing
54
P
control lines for quick-coupler
main pump (Pmax. 420 bar)
tank
adjustable unlocking pressure
adjustable locking pressure
measuring port for control lines
P
T
1
A:
B: P: T: 1: control lines for quick-coupler
priority oil flow leveling blade
main pump (Pmax. 350 bar)
tank
adjustable unlocking pressure
Hydraulic package
for inside hosing
Rädlinger Tilt Motor
Application
The tilt motor replaces the traditional tilt head with cylinder, and is thus
responsible for the force transfer between excavator and bucket, and for
the tilt movements.
PROFILE
Features
The harsh conditions of the construction sector have already proven
to be detrimental to tilt technology with cylinders found in the market.
Damaged cylinders, worn tilt heads and bushings, jammed bolts due to
lack of lubrication and, finally, downtime due to damaged or torn off
hydraulic hoses try the nerves of the market leader and cost money.
• Extremely robust through the use of high strength alloys/nitriding
• Only provider with cast housing
• Safe: the hydraulic hoses are routed
directly to the tilt motor, virtually ruling
out any damage to them
• Bolts, cylinder and cylinder covering not
needed
• The motor is fully maintenance-free as a
result of lubrication over the hydraulic oil
of the grapple slewing gear
• Screw-retained suspension for changing for various carrier machines
• All these advantages can be exploited
by installing the tilt motor on different
tools, such as backhoe buckets, demoliti on hammers, ripper teeth, etc.
• Wear-free: even after many years of usage,
backlash-free rotary motion is guaranteed
by generously dimensioned and hardened
components
• Maximum Rotation and rotary torque
values
• Integrated pressure relief valve prevents overload of the tilt motor
Extra equipment
• Special seal on request to protect the
standard seal of the motor for use under water or in fine-sand ground
• Hydraulic seals are suitable for standard
bio-oils
55
Rädlinger Tilt Motor
TECHNICAL
DETAILS
Class 03 (- approx. 3.5 t)
Class 07 (approx. 4 - 6.5 t)
Dimensions (w x h x l):
170 x 190 x 220
Dimensions (w x h x l):
206 x 228 x 291
Weight:
36 kg
Weight:
72 kg
Tilt angle:
95°
Tilt angle:
100°
Torque:
2,100 Nm at 150 bar
Torque:
4,000 Nm
Retention torque:
approx. 3,000 Nm
Retention torque:
approx. 7,000 Nm
Oil requirement:
0.4 ltr./95°
Oil requirement:
0.7 ltr./100°
Operating pressure
150 bar
Operating pressure
150 bar
Max. Operating pressure
180 bar
Max. Operating pressure
180 bar
Class 09 (approx. 7 - 10 t)
56
Class I (approx. 11 - 14 t)
Dimensions (w x h x l):
250 x 265 x 319
Dimensions (w x h x l):
260 x 265 x 350
Weight:
103 kg
Weight:
128 kg
Tilt angle:
100°
Tilt angle:
100°
Torque:
6,900 Nm at 150 bar
Torque:
8,500 Nm at 150 bar
Retention torque:
approx. 13,000 Nm
Retention torque:
approx. 16,000 Nm
Oil requirement:
1.1 ltr./100°
Oil requirement:
1.4 ltr./100°
Operating pressure
150 bar
Operating pressure
150 bar
Max. Operating pressure
180 bar
Max. Operating pressure
180 bar
Class II (approx. 15 - 22 t)/Kl. IIs (- 23 t)
Class III L (approx. 24 - 26 t)/III (approx. 27 - 29 t)
Dimensions (w x h x l):
310 x 340 x 368/(346 x 363 x 368)
Dimensions (w x h x l):
360 x 370 x 420/(365 x 408 x 471)
Weight:
180 kg/(193 kg)
Weight:
235 kg/(330 kg)
Tilt angle:
100°
Tilt angle:
100°
Torque:
16,000 Nm at 150 bar
Torque:
19,500 Nm/(23,000 Nm) at 150 bar
Retention torque:
approx. 30,000 Nm
Retention torque:
Oil requirement:
2.5 ltr./100°
approx. 38,000 Nm/
(approx. 43,000 Nm)
Operating pressure
150 bar
Oil requirement:
3 ltr./100°/(3.5 ltr./100°)
Max. Operating pressure
180 bar
Operating pressure
150 bar
Max. Operating pressure
180 bar
Class IV (approx. 30 - 38 t)
Class V ( - approx. 50 t)
Dimensions (w x h x l):
405 x 448 x 540
Dimensions (w x h x l):
455 x 458 x 635
Weight:
452 kg
Weight:
690 kg
Tilt angle:
100°
Tilt angle:
100°
Torque:
33,000 Nm at 150 bar
Torque:
47,000 Nm at 150 bar
Retention torque:
approx. 62,000 Nm
Retention torque:
approx. 90,000 Nm
Oil requirement:
5.5 ltr./100°
Oil requirement:
8.3 ltr./100°
Operating pressure
150 bar
Operating pressure
150 bar
Max. Operating pressure
180 bar
Max. Operating pressure
180 bar
For carrier machines with an operating weight of up to 13 t are now also possible with a swivel angle of up to 2 x 90°.
For carrier machines with an operating weight of over 13 t up to maximum 2 x 70°.
57
Rädlinger Dragline Bucket
Application
The dragline bucket is attached to a cable excavator to handle and pick
up bulk goods and for underwater gravel extraction. It is therefore used
in sand or gravel pits and for earthworks or dyke construction work.
PROFILE
Features
• Extremely robust construction design
made of highly wear-resistant Steel
• Completely welded design,no cast parts
• Additional strengthening and use of
extremely wear-resistant steels in areas
exposed to particularly high stresses
• The drag chain shackle can be set in three
different positions
• Generously dimensioned drag chains to
compensate for wear phenomena
• Long life
• Easy to operate, quick loading, good fil ling performance and easy emptying due
to its shape, optimised to match its practi cal use
• Different versions and hard facing levels
available
• Special designs customised to individual
customer wishes also possible
TECHNICAL
DETAILS
for standard version
58
Size cu. Yd
1
1¼
1½
1¾
2
2¼
2½
2¾
3
Capacity m³
0.76
0.96
1.15
1.34
1.53
1.72
1.91
2.1
2.29
Water volume l
884
1085
1314
1493
1713
1909
2113
2308
2555
Weight (without equipment) kg
520
660
790
870
920
1120
1220
1670
1780
Weight (with equipment) kg
940
1080
1200
1460
1530
1900
2100
2900
3045
Width (upper front) mm
1150
1220
1300
1380
1435
1460
1515
1540
1570
Width (upper back) mm
1020
1080
1155
1230
1280
1300
1350
1375
1400
Height (front) mm
760
815
870
910
935
965
1005
1030
1060
Length mm
1370
1495
1520
1625
1675
1775
1830
1880
2030
E
Sizes 8 ½ - 18 cu. Yd. on request
3¼
3½
3¾
4
4½
5
5½
6
6½
7
7½
8
2.48
2.68
2.87
3.06
3.44
3.82
4.20
4.58
4.96
5.35
5.73
6.11
2774
2934
3160
3398
3795
3993
4390
4729
5182
5522
5918
6287
1935
1980
2040
2100
2785
3015
3310
3615
4360
4700
5035
5370
3200
3480
3570
3640
4280
4590
4890
5190
6400
6740
7075
7410
1625
1650
1705
1735
1790
1840
1895
1950
2000
2060
2100
2140
1450
1475
1500
1525
1570
1620
1670
1720
1770
1820
1860
1890
1060
1090
1115
1170
1170
1195
1220
1275
1300
1330
1385
1385
2060
2090
2150
2180
2230
2280
2335
2410
2460
2540
2615
2640
59
Light-Material Loading Shovel
Application
This shovel is exceptionally suited for handling light bulk material. Areas
of application: feed industry, composting plants, coal reclaiming, sawmills and snow transport, Other areas of application depend on choice
of equipment with drag edge or upward increasing base at the rear of
the shovel.
PROFILE
Features
• Maximum shovel volume through design
for light bulk material
• Drag edge option: Load area always
remains straight since the edge can be
used as a grading blade during reverse
driving
• Shovel shape designed for fast and maxi mum filling
• Manufactured in all sizes and for all carrier machines and with direct or quick-
coupler attachment possible
• Equipped lengthwise with four wear
strips and one transverse wear strip
Extra equipment
• Deflector plate
• Shovel body complete in HB 400
• Toothed blade in HB 500
• Reversible screw-on blade in HB 500
• Load hook
TECHNICAL
DETAILS
60
Class (t)
Cutting width in mm
Capacity SAE/L
III (3.5 - 4)
approx. 2000
840
1200
IV (4 - 5)
approx. 2100
1080
1500
V (5 - 7)
approx. 2200
1440
2000
VI (7 - 9)
approx. 2400
2000
2700
VII (9 - 11)
approx. 2600
2400
3200
E
Class (t)
Cutting width in mm
Capacity SAE/L
VIII (11 - 13)
approx. 2800
3000
3700
IX (13 - 17)
approx. 3000
4000
5000
X (17 - 23)
approx. 3200
4900
6000
XI (22 - 30)
approx. 3600
5760
7200
XII (28 - 50)
approx. 3800
10000
61
Standard Loading Shovel
Application
The standard loading shovel is suitable for handling “medium” bulk materials (e.g. ballast, soil, gravel, stone chippings or sand loading). Other
areas of application depend on choice of equipment with drag edge or
upward increasing base at the rear of the shovel.
PROFILE
Features
• Drag edge option: Load area always
remains straight since the edge can be
used as a grading blade during reverse
driving
• Shovel shape designed for fast and maxi mum filling
• Installation of all standard toothed
systems, cutting edges and toothed bla des according to customer wishes possible
• Manufactured in all sizes and for all
carrier machines and with direct or quick coupler attachment possible
• Equipped lengthwise with four wear
strips and one transverse wear strip
Extra equipment
• Shovel body complete in HB 400
• Load hook
• Tooth protection
• Deflector plate in lifting frame area
• Toothed blade
TECHNICAL
DETAILS
62
Class (t)
Capacity SAE/L
Weight (approx. kg)
III (3.5 - 4)
700
375
IV (4 - 5)
900
450
V (5 - 7)
1200
510
VI (7 - 9)
1700
750 - 800
VII (9 - 11)
2000
880 - 950
E
Class (t)
Capacity SAE/L
Weight (approx. kg)
VIII (11 - 13)
2500
1170 - 1270
IX (13 - 17)
3300
1570 - 1770
X (17 - 23)
4200
2000 - 2330
XI (22 - 30)
5000
2675 - 3075
XII (28 - 50)
7000
4720
63
Clamp Shovel
Application
The clamp shovel is suitable for handling unwieldy goods.
It is particularly used in recycling and in composting for loading waste
wood, scrub, paper, sheet-metal scrap etc.
PROFILE
Features
• Stable and robust design
• Generously dimensioned hydraulic cylin ders for high closing forces
• Open and closed position of clamp limited by mechanical stops
• Can be driven up to the wall with fully
opened clamp
Extra equipment
• Shovel body complete in HB 400
• Reversible screw-on blade in HB 500
• Special equipment according to custo mer wishes possible
64
E
Heavy Duty Shovel
Application
With its extremely robust construction design, the heavy duty shovel can
also be used under difficult conditions with particularly strong abrasion
characteristics, such as found in the mining industry when handling or
loading quarry and rock materials.
PROFILE
Features
• Very generously dimensioned box
• Built-up side cutting faces
• Shovel with trapezoidal blade
• All cutting widths are fitted with 8 teeth
• Spillguard with pipes or slots
Extra equipment
• Shovel body complete in HB 400
• Side stone deflectors
• Protection segments
• Screw-on segments
TECHNICAL
DETAILS
Class (t)
Cutting width
in mm
Capacity SAE/L
Weight (approx.
kg)
VIII (11 - 13)
approx. 2800
2300
1685 - 1860
IX (13 - 17)
approx. 3000
3000
2110 - 2350
X (17 - 23)
approx. 3200
3800
3000 - 3340
XI (22 - 30)
approx. 3600
4600
3590 - 3940
XII (28 - 50)
approx. 3800
6300
5300 - 5920
XIIIa (- 75)
approx. 4300
9000
XIIIb (- 100)
approx. 5000
12000
65
High-Tip Shovel
Application
The high-tip shovel is suitable for all applications which require high
dumping elevations.
PROFILE
Features
• Optimal fill level with flowing materials
by means of front lenticular shovel contour
• Largest possible inside width of shovel
through cylinder boxes set to the rear
and recessed bolt locks on the outer side
of the shovel for optimum penetration
• Standard slots and additional bolted
covers based on the visual field standard
for oversized shovels
• Adjustable, end-position damped cylinder
• Lowering brake valve
• Hydraulic piping covered in protective
casing
• Two-cylinder implementation, set up
diagonally in outside boxes at the rear
• As standard, rubber stops between frame
and shovel
• Blade with straight blade in HB500
(without teeth)
• Version with narrow and lowered frame
at rear of shovel available
Extra equipment
• Shovel body complete in HB 400
• Reversible screw-on blade in HB 500
• Hose package
• Clamp
66
E
TECHNICAL
DETAILS
Class (t)
Model
Cutting
width in mm
Capacity
SAE/L
III (3.5 - 4)
n
2100
1200
IV (4 - 5)
V (5 - 7)
VI (7 - 9)
VII (9 - 11)
VIII (11 - 13)
n
2200
1500
l
2300
1700
n
2300
1200
el
2400
3000
l
2400
2300
n/v
2400
1700
el
2500
3800
l
2500
3000
n/v
2500
2300
el
2700
4800
l
2700
3600
n/v
2700
2800
Class (t)
IX (13 - 17)
X (17 - 23)
XI (22 - 30)
Model
Cutting
width in mm
Capacity
SAE/L
el
2980
5000
l
2980
4200
n/v
2980
3200
el
3200
7300
l
3200
6200
n/v
3200
4500
el
3600
12000
l
3600
8000
n/v
3600
6000
Scale of bulk density:
< 0.8 t/m³
extra light
0.8 - 1.2 t/m³ light
1.2 - 1.6 t/m³
normal
> 1.6 t/m³
reinforced
(el)
(l)
(n)
(v)
67
Skeleton Shovel
Application
This special tool is exceptionally suited for loading and sorting work.
Skeleton shovels are mainly used for filtering out rock and paving stones
and for recycling building rubble.
PROFILE
Features
• Customised width between the skeleton bars
• Shovel with skeleton base or bars
• The shovel is equipped as standard with 8
teeth or turning blade screwed on below
Extra equipment
• Shovel bodies and bars in HB 400
TECHNICAL
DETAILS
68
Class (t)
Cutting width
in mm
Capacity
SAE/L
I (- 3)
approx. 1800
450
II (3 - 3.5)
approx. 1900
550
III (3.5 - 4)
approx. 2000
700
IV (4 - 5)
approx. 2100
900
V (5 - 7)
approx. 2200
1200
VI (7 - 9)
approx. 2400
1700
VII (9 - 11)
approx. 2600
2000
VIII (11 - 13)
approx. 2800
2500
IX (13 - 17)
approx. 3000
3300
X (17 - 23)
approx. 3200
4200
E
Heavy Duty Fork
Application
The heavy duty fork is very well suited for the toughest applications (e.g.
shell limestone and granite block mining). A typical field of application
is the transport of loosened boulders from the wall to the truck for
removal.
PROFILE
Features
• Up to 50 t machine operating weight
available
• Extremely robust and wear-resistant
design
• Strengthened bearing points on the
receptacle
• Teeth fully embedded in solid fork base
body
• Production with direct or quick-coupler
attachments possible
69
Pallet Fork
Application
The pallet fork is suitable for the lifting and transporting of under-support pallets and goods of all types (pallet fork up to 16,000 kg).
PROFILE
Features
• Individually adjustable forks
• Tooth safety closure
• Production with direct or quick-coupler
attachments
Extra equipment
• Custom-built designs available
TECHNICAL
DETAILS
Class I, II (- 3.5 t)
FEM-Class
Design
Pair/kg loadbearing capacity
Fork carrier dimensions in mm
Prongs in mm
II
normal
2500
1400
120 x 40 x 1200
III
heavy
4000
1500
125 x 45 x 1200
Class III, IV, V (- 7 t)
70
FEM-Class
Design
Pair/kg loadbearing capacity
Fork carrier dimensions in mm
Prongs in mm
III
normal
4000
1500
125 x 45 x 1200
III
heavy
5000
1500
150 x 50 x 1200
E
Class VI, VII (- 11 t)
FEM-Class
Design
Pair/kg loadbearing capacity
Fork carrier dimensions in mm
Prongs in mm
III
normal
5000
1500
150 x 50 x 1200
IV
heavy
7000
1750
150 x 60 x 1200
IV
heavy
10000
1750
200 x 70 x 1500
Class VIII, IX (- 17 t)
FEM-Class
Design
Pair/kg loadbearing capacity
Fork carrier dimensions in mm
Prongs in mm
IV
normal
7000
1750
150 x 60 x 1200
IV
normal
10000
1750
200 x 70 x 1500
V
heavy
10000
1750
200 x 80 x 1500
Class X (- 22 t)
FEM-Class
Design
Pair/kg loadbearing capacity
Fork carrier dimensions in mm
Prongs in mm
V
normal
10000
1750
200 x 80 x 1500
on request
heavy
16000
on request
on request
71
Quick-Coupler Systems Wheel Loader
Application
The quick-coupler system enables rapid and problem-free exchange of
tools. The standard version with bolt locking is suitable for normal use.
Rädlinger also provides a suitably designed version with key locking for
the toughest applications.
PROFILE
Features
Type N
• Hydraulic changing of attachments by
pressing a button in the driver’s cab
• Available for all standard types of machine
• Type N (normal applications): with bolt
locking below and locking display
• Type S (heavy-duty applications): with key
interlocking below and absolute backlash free and wear-free fit; minimal front sec tion for higher break-out force on the tools
Extra equipment
Type S
• Hydraulic attachment kit: valve control
with adjustable locking and unlocking
pressure
• Lockable ball valve for controlling a hyd raulic attachment
TECHNICAL
DETAILS
72
Class
Standard
Operating
weight (t)
Type
III, IV, V
3.5 - 7
N III
VI
7 - 9.5
N VI
VII
9.5 - 12.5
N VII
VIII
12.5 - 14.5
N VIII
IX
14.5 - 17
N IX
X
17 - 22
NX
XI
22 - 28
N XI
E
Hydraulic attachment kit
3
A
B
1
2
Class
key locking
Operating
weight (t)
Type
X
17 - 22
SX
XI
22 - 28
S XI
XII
28 - 45
S XII
T
P
Connections:
A,B: Control pipes for quick-coupler
P: Main pump (Pmax. 420 bar)
T: Tank
1: adjustable unlocking pressure
2: adjustable locking pressure
3: Measurement connections for control pipes
73
Special Designs
Application
Many work processes can be created efficiently through individual
designs and a good idea. Rädlinger Maschinen- und Anlagenbau has
the planning and technical expertise to develop and implement special
designs.
PROFILE
Examples of special designs
previously created:
• Boat mooring barge
• Ball forceps
• Screen unit
• Arm extension
• Additional side panels
• Collecting tank
• Pipe insertion device
• Mounting roller assembly
• Screed box
• Dozer blade
• Crushing systems
• High-tip bucket RH 90
74
E
75
Regeneration and Repair
Long and intensive work performances leave traces on your buckets and
shovels. Proper and timely maintenance is therefore necessary both for
lasting use of the construction equipment and also for optimal machinery performance and economical fuel consumption.
High quality & fast
Rädlinger Maschinenbau has a large stock of various wear and spare
parts made of high-quality materials from well-known manufacturers,
which are used for regeneration. Together with the modern machine
pool, repairs or conversions can be carried out without long waiting
times. Rädlinger also provides their customers with blades, bucket bases
and various sheet metal parts for their own regeneration.
Individual & tested
Details about the equipment’s area of application and the options for
technical improvements are coordinated with the customers for optimum regeneration of the attachment.
One option contains various protective armour systems that are fitted to
the entire attachment and effectively protect all areas that are subject
to wear. These have been best proven in use and have been further
developed for years.
76
We professionally repair your worn and damaged
attachments of all types, for example:
•
•
•
•
•
Backhoe buckets and face shovels
Trench clearing buckets
Loading shovels
Arms and booms
Sieving and crushing systems
Our sales representatives coordinate the technology with
you, and advise you competently on an optimal and rapid
repair.
77
Wear and Spare Parts
Application
Downtime halts project progress and costs money. To provide customers
and our own production with relevant components for repairs and regeneration, Rädlinger has a large store of wear and spare parts.
PROFILE
We have various spare and wear parts
in stock:
• Steel blades
• Reversible blades
• Profile blades
• Wear strips
• Tooth systems
• Standard tooth systems (Cat, Bofors);
further tooth systems on request
• Loading hooks
• Bolts and connectors
• Hydraulic cylinders
78
E
79
Contract Manufacturing
Both small companies and large industrial productions often
experience bottlenecks and overload with machinery and
personnel. Rädlinger thus offers contract manufacturing work
as well as the complete production of assemblies for external
firms.
With qualified employees and a modern machine pool, as
well as fast and flexible order processing, we are happy to
support you in the production of mechanical components and
welded constructions with mechanical machining, and offer
production from custom designs, zero series and small series
through to series production.
1 ZAYER 20 KF 3000 CNC bed-type milling machine
Traversing distances (x/y/z) 2,700/1,200/1,000 mm, spindle speed 6,000 rpm
Services/machine pool
Turning
2 TRENNJÄGER SBM 1000 CNC sawing and drilling
machines max. working 1,000 x 420 mm, max. length
18,000 mm
1 GEMINIS GT 5 G2 CNC lathe with C axis
Peak height 1,200 mm, passage 850 mm, distance between centres 2,000 mm
1 DAIß+PARTNER HBA 500S GLR-XL CNC doublebevelling metal band sawing machine
max. working 500 x 400 mm, max. length 12,000 mm
1 TUR MN 930 cycle-by-cycle lathe
Peak height 930 mm, passage 630 mm, distance between
centres 4.000 mm
Cutting/deburring
1 WEILER C50 cycle-by-cycle lathe
Peak height 570 mm, passage 340 mm, distance between
centres 2,000 mm
6 Universal Lathes
Peak height max. 650 mm, distance between centres max.
2,000mm
Milling
1 HURCO VMX 42 t CNC machining centre
Traversing distances (x/y/z) 1,000/600/600 mm, spindle
speed 12,000 rpm
1 TOS WHN 13.8 CNC table borer with rotary table
Traversing distances (x/y/z) 3,500/2,000/1,250 mm, spindle speed 2,500 rpm
Sawing/drilling
2 MESSER MultiTherm 4000 CNC flame cutting machines
max. sheet thickness 200 mm, max. working area 3,000
x 14,000 mm
1 ZINSER 1211 NC flame cutting machine
max. sheet thickness 100 mm, max. working area 1,500
x 4,000 mm
1 ERL Plasma chamfering robot Hi Focus 360i
max. cutting length 50 mm, max. working area 2,000 x
6,000 mm
1 DMU 65 monoBLOCK CNC 5-axis milling machine
with tilt rotary table
Traversing distances (x/y/z) 650/650/560 mm, spindle
speed 10,000 rpm
1 ATLANTIC ATSL 3016 sheet metal shear
max. cutting length 3050 mm, max. sheet thickness 16 mm
1 SORALUCE FR-16000 CNC moving column milling
machine with swivel head
Traversing distances (x/y/z) 16,000/3,600/1,600 mm,
spindle speed 4,000 rpm
Folding/roll bending
80
1 LISSMAC SBM-D 1000 E slag removal machine
max. working area 1,000 x 100 mm
2 BYSTRONIC Beyeler PR10 800x4400 CNC Tandem
Folding press brake
max. pressing force 800 to., max. bending length 4,400
mm (in tandem operation 8,800 mm)
1 ATLANTIC HPAT 30300 folding press brake
max. pressing force 300 to., max. bending length 3,000 mm
1 ATLANTIC HPT 135/36 folding press brake
max. pressing force 150 to., max. bending length 3,000 mm
1 DAVI MCB 3558 CNC 4 rolls round bending machine
max. sheet thickness 45 mm, max. bending length 3,500 mm
1 DAVI MCB 2050 CNC 4 rolls round bending machine
max. sheet thickness 60 mm, max. bending length 2,000 mm
1 DAVI MCP 3211 3 rolls profile bending machine
Welding
• Manual arc welding
• Metal active gas welding (MAG)
• Tungsten inert gas welding (TIG)
• Arc stud welding with arc ignition
Continuously available stocked range of sheet metal
Thickness range from 4 - 140 mm with acceptance test
certificate 3.1
• Unalloyed structural steels S235JR, S355J2+N
• Wear-resistant sheets HB 400, HB 450 and HB 500
• High-strength fine-grained construction steel S690QL
Additional services
• Complete sheet metal solutions, from the design to
production through to assembly
• High-quality individual and series part production
• Production of welded structures in structural steelwork
and mechanical engineering up to 40 to.
• Sand blasting facility
• Paint shop
81
Steel Constructions
As a specialist in steel construction, we provide all kinds
of steel construction designs from the development phase to implementation, through to installation. We deliver
tailor-made solutions according to your needs and prove
convincing through our fast and flexible order processing.
A modern machine pool and the expertise of our qualified
employees ensure excellent results.
Range of services
Steel building construction
• Hall construction
• Trusses
• Façades
• Steel support structures
Steel noise barriers
• For motorways, trunk roads and railway lines
Bridge construction
• Steel bridges
• Composite bridges
• Pedestrian bridges
• Railway bridges
Special structures
• Aluminium melting furnaces
• Podiums and stages
• Substructures for PV plants
• Pontoons
• Welded structures
82
Equipment
• 5 halls with a production area of approx. 12,000 m²
• 19 bridge cranes with a lifting capacity of 5 - 20 t
• 13 wall-mounted slewing cranes
• 1 paint shop with sand blasting facility
• 4 Press brakes
• 3 guillotine shears
• 4 saws
• 2 drilling/sawing machines for supports up to 1,000 mm high
• 3 flame cutting machines for sheet metal up to 14,000 mm long
• 1 chamfering robot
• 10 stationary drills
• 9 lathes
• 5 milling machines
• 1 CNC drills/milling machines
• 3 roll bending machines
• 60 welding units
• 1 punching machine
• 1 angle punching machine
• Demmeler assembly tables
• 17 lift trucks
We have the following certifications:
• Quality management system according to
DIN EN ISO 9001-2008
• Environmental management system according to
DIN EN ISO 14001-2004
• Occupational safety and environmental protection system
according to DIN EN OHSAS 18001
• Certificate of manufacturer’s qualification for welding
steel structures according to DIN 18800-7:2008-11 Class E
with extension according to RIL 804
• Certified according to DIN EN 1090 EXC 3
• Certified according to DIN EN 3834-2
References
• Noise barriers, Lauferbachtal
• Utility bridge, Goldsteig, Cham
• 2 steel bridges, Ingolstadt
• Protzenweiher Bridge, Regensburg
• Production hall, Schönthal
• Hinged roof for biogas plant, Wriezen
• Steel construction for biomass co-generation plant, Hengersberg
• Rehabilitation of OMV furnace, Burghausen
• Load-bearing girders, Krones, Freising
• Bicycle shelter, Augsburg
• Furnace flange for aluminium melting furnace
• Airport recycling plant, Munich
• ABX Hall, Regensburg
• Antenna Mast, Alfeld
83
MECHANICAL ENGINEERING
RÄDLINGER
MASCHINEN- UND ANLAGENBAU GMBH
Kammerdorfer Straße 16
93413 Cham, Germany
[email protected]
www.raedlinger.com
Phone.: +49 (0) 99 71-40 03-100
Fax: +49 (0) 99 71-40 03-123
Managing Directors:
Werner Rädlinger, Josef Rädlinger sen.
Subject to technical modifications and
product improvements.
All information about dimensions
and weight are approximate and not
guaranteed.

Download Report