Program

International Automotive Body Congress (IABC) 2014, www.bodycongress.org
Global Powertrain Congress (GPC) 2014, www.gamcinc.org
Ford Conference & Event Center – 1151 Village Road, Dearborn, MI 48124
October 29 – 30, 2014
Program Wednesday, October 29, 2014
Registration 7:30am – 9:00 am
Plenary & Keynote: Manufacturing Challenges
Room: Grand Hall 8:30 am to 1:00 pm
Session Chair: Katsuhiko Sugiyama, Director, Nissan
2015 Body-in-White Introductions
Room: Grand Hall 2:00 pm to 7:30 pm
Session Chair: Bob Muzichuk, Director, General Motors
8:30 am
Introduction & Opening Remarks
Katsuhiko Sugiyama
Director
Nissan
2:00 pm
Ford Edge
Shawn Morgans
Ford
8:35 am
Dan Wohletz
Vice President
Henkel
3:00 pm
Acura TLX
Shawn Campbell, Shams Syed
Honda
9:05 am
David Malik
Director
General Motors
4:00 pm
Break
9:35 am
Burkhard Huhnke, PhD
General Manager & Member of the Board
Volkswagen
4:30 pm
The 2015 Chevrolet Spark and Spark BEV Body Structure
Warren Parsons
General Motors
10:05 am
Program Overview
Nasim Uddin, PhD
President
GAMC
5:00 pm
The All New 2015 Chevrolet Colorado and GMC Canyon Cab
Structure
Wendy Malone
General Motors
10:15 am
Break
10:35 am
Martin Kinsella
Director of Advanced Materials and Process Technologies
Comau
6:00 pm
Reception & Exhibits and BIW Walk-Around
11: 05 am
Bruce Hettle
Vice President, Manufacturing
Ford
11:35 am
John Butler
Director - Global Rolled Products Business Technology
ALCOA
12:05 pm
Katsuhiko Sugiyama
Director
Nissan
Q&A Panel Discussion
12:35 pm
1:00 pm
Session Adjourned & Lunch
7:30 pm
Adjournment
To register and exhibit call (734) 997 9249,
email to [email protected] or
fax (734) 997-9443.
Technical Introductions of Vehicles
Sponsored By
Program Thursday, October 30, 2014
Registration: 8:30 am – 9:00 am
Powertrain Efficiency
Room: 106 8:30 am to 12:30 pm
Session Chair:
Eric Foote, Environmental Engineer, Ford
8:30 am
Next Generation Internal
Combustion Engines and Future
Fuel Opportunities - Keynote
Robert Wagner, PhD
Oak Ridge National Laboratories
Product Engineering
Room: 103 8:30 am to 12:30 pm
Session Co-Chairs:
Warren Parsons, Group Manager
General Motors
Patrick Shafer, Manager/Principal Engineer of
Underbody Design, Honda
Gagan Tandon, Director, AMTB
8:30 am A Study on Spot Weld FEA
Modeling for Fatigue Analysis
Mingchao Guo, PhD, Surya Yerva,
Kaizhi Quan, Ram Bhandarkar
Chrysler
9:00 am Probabilistic Fatigue Life
Assessment of Vehicle Components
and Systems
Zhigang Wei, PhD
Tenneco
9:00 am A New Simulation Tool can Predict
Crash Ductility of Hot-Stamped
Laser Welded Blanks and Proves
the Need of Dedicated Process in
Severe Crash Conditions
Manish Bhatt, Sadok Gaied, PhD,
Ivan Viaux, PhD
AMTB
9:30 am RCCI using Natural Gas for
Heavy Duty Diesel
Philip Zoldak, PhD
Andrzej Sobiesiak, PhD
University of Windsor
9:30 am The Chrysler Thermoplastic
Lift-Gate
Jian Tao, Saad Abouzahr, PhD
Chrysler
10:00 am Break
10:30 am Single Filter and Other Improved
Methods for Applying Partial Flow
Dilution to Light Duty
Particulate Measurement
Eric Foote
Ford
11:00 am E-Segment Vehicle Meet the Most
Stringent of all Emission
Regulations in the World: the
Future US Tier 3 Bin 30/ California
SULEV30 Standards
Paolo Di Martino
IAV
11:30
Source of Emissions during Closed
Loop Operation in a PFI Fueled
Stoichiometric Gasoline Engine
Richard Blint, PhD
N2Kinetics Research
10:00 am Break
10:30 am Design of a Composite Structural
Panel for High Volume Production
Leland Decker, James Truskin
Chrysler
Matt Plauman
Magna
11:00 am High Elongation 1.2GPa Tensile
Steel Development
Paul Villemonte
Nissan
12:00 pm Q & A - Panel Discussions
12:00 pm Ductile Fracture Prediction for
Automotive Applications
Pawel Woelke, Brett Benowitz,
Badri Hiriyur
Weidlinger Associates, Inc.
Lay Knoerr, Timo Faath,
ThyssenKrupp Steel USA
John Hutchinson, PhD
Harvard University
12:30 pm Session Adjourned & Lunch
12:30 pm Session Adjourned & Lunch
11:30 am Latest updates on Lightweight
Door Ring Concepts for Improved
Crashworthiness and Material
Utilization for Truck Concepts
Shawn Devraj, Sadok Gaied, PhD
Ivan Viaux, PhD
AMTB
Manufacturing Processes
Room: 105 8:30 am to 12:30 pm
Session Co-Chairs:
Shawn Morgans, Manager, Ford
Sameer Gupta, Senior Engineer, Honda
Materials Applications in BIWs
Room: 103 1:30 pm to 5:30 pm
Session Co-Chairs:
Changqing Du, PhD, Manager, Chrysler
Jim Evangelista, Director, Shiloh Industries
Dean Gericke, Manager, Vari-Form
BIW Laser Applications
Room: 105 1:30 pm to 6:00 pm
Session Co-Chairs:
Elaine Garcia, Advanced Technology Manager,
General Motors
Kevin Schnipke, Production Engineer, Honda
8:30 am Hot Stamping Part Design and
Feasibility Study in Respect of
Functionality and Optimized
Production Costs
Jens Aspacher
Schuler
9:00 am Aluminum Edge Stretching Limit
Experimental Study with DIC Strain
Measurements using Notched Coupon
Tensile Tests
Changqing Du, PhD, Dajun Zhou, PhD,
Yongjun Zhou
Chrysler
Aukury Cowart, Christina Phillips
Guobiao Yang, PhD, Lianxiang Yang,
PhD, Praneeth Komaragunta ,
Rodrigue Narainen, PhD, Xiaona Li,
Xin Xie, Yaqian Zheng
Oakland University
9:30 am Virtual Hot Forming – Die Face &
Process Engineering – From
Customer Request to Virtual
Reality. How to proceed with this?
Harald Porzner
ESI Group
10:00 am Break
10:30 am Advances in Roll forming
Ultra-High-Strength
Car Body Components
Franz Liebler
Dreistern
1:30 pm Lightweight Materials for Bodies
and Closures: Issues and
Opportunities
Paul Krajewski, PhD
General Motors
1:30 pm Laser Joining of Aluminum,
Fundamentals & Automotive
Examples
David Havrilla
TRUMPF
2:00 pm Flash® Bainite: Room Temp
Stamping 1550 MPa Structural and
Energy Absorbing
Components to 0T/1T Bend Radii
Gary Cola Jr
Flash Bainite
2:00 pm BlankLight - Aluminum Laser
Welded Blanks
Steve Fetsko
Shiloh
2:30 pm
Lightweighting with
Magnesium Structures
Stefan Janols
Shiloh
2:30 pm Trends of Laser Applications in
Hot-Stamping
Frank Geyer
TRUMPF
3:00 pm
3:30 pm
Break
New Coil-Applied Coating for
Press-Hardening Steel
William Fristad, PhD
Henkel
3:00 pm
3:30 pm
Break
Coil-fed Laser Blanking
Technology
Manuel Hunger
Schuler
11:00 am InCar®plus - Innovative
Steel Solutions
Timo Faath
ThyssenKrupp
4:00 pm
Mass Reduction for Steel
Pickup Truck Structures
Nicolas Schneider, PhD
Tom Wormald,
Elie Gibeau
ArcelorMittal
4:00 pm
11:30 am Innovative Joining Technologies
for Multi-Material Lightweight
Car Body Structures
Markus Wagner
Axel.Jahn, PhD
Berndt Brenner, PhD
Eckhard Beyer, PhD
Fraunhofer IWS
12:00 pm Innovations in Aluminum for High
Volume Automotive Body
Duane Bendzinski
Novelis
4:30 pm
Automotive Chassis Application
using the TWIP Steel
Lee Min Sung, Kwon Hyuk Sun
Chung Youn Il
POSCO
4:30 pm
5:00 pm
BIW Weight Reduction Using
Aluminum Structural Castings
Don Carter
Shiloh
5:30 pm
12:30 pm Session Adjourned & Lunch
5:30 pm
Session Adjourned
6:00 pm
Smart Laser Welding and
Monitoring
Jean-Paul Boillot
Raynald Simoneau, PhD
Jean-Claude Fontaine
Jacques-Andre Gaboury, Jeff.Noruk
Servo-Robot
Solutions to Laser Weld AlSi
Coated Steel
Domenico Iacovelli
ANDRITZ Soutec
Evaluating Laser Blanking for
Your Manufacturing Needs
Jay Finn
LaserCoil Technologies
Joining Solutions for High Volume
Production of Aluminum
Tailor-Welded Blanks
Yuri Hovanski, PhD, Glenn Grant, PhD
PNNL
Blair Carlson, PhD, John Carsley, PhD
Susan Hartfield-Wunsch, PhD
General Motors
Mark Eisenmenger, Tom Luzanski
TWB Company
Session Adjourned
5:00 pm
General Registration Form
PLEASE ATTACH BUSINESS CARD, PRINT OR TYPE
Name:
Title:
Company:
Mailing Address:
P.O. Box ___________Mail Code: ___________ CIMS code: ____________ Suite: __________
City:
State/Province:
Zip:
Daytime Phone:
Fax:
Email:
PLEASE INDICATE BY AN “X” IN THE
APPROPRIATE BLANK BOX(ES)
I will attend CONFERENCE(S) on:
October 29
I will attend RECEPTION on
October 29
FEE SCHEDULE FOR REGISTRANTS
General Registration
Authors, Chairs, and Director’s Registration
Co-Author’s Registration
Country:
October 30
$1795
$795
$995
□
□
□
Registration Includes: Access to sessions on all 2 days of the conference; also includes a digital access to GAMC Library of the available papers and presentations for one year starting on
the first day of the conference, coffee breaks, lunch(es), reception, and access to the exposition)
Additional digital access account: ____________ ($1295 per access)
PAYMENT METHODS: (All checks must be drawn from U.S. banks in U.S. funds only)
Make Check Payable to: Global Automotive Management Council (GAMC). In the amount of, US$ ___________
For Credit Card Payment: MasterCard VISA American-Express
Account #: _____________________________________________ CCV____________ Expiration Date__________
(Cardholder’s name & billing address if different from the above)
Signature: ____________________________________________Date____________________
Mail or FAX Registration Information to: IABC, 5305 Plymouth Road, Ann Arbor, MI 48105, USA. FAX: 734 997 9443
PHONE: 734 997 9249. REFUND POLICY: NO REFUNDS.

Download Report