General Information Categories Ordering Dimensions Container

020911
160T11006
BJ
1SNC 160 001 C0205
Jumper bar
Use the BJ jumper bar to connect consecutive and non consecutive terminal blocks with the same spacing. Two types of jumper bars are
available : an assembled unit and a not assembled unit. Both jumper bars include a metal tube wich makes contact with the terminal block's
internal connector bar.
To mount the BJ jumper bar accessory onto terminal blocks still having top center partitions, the user must cut out all partitions between the
blocks.
When the BJ jumper bar is used with each of two series of connected blocks, the top center opening at the junction of the two series must be
closed by a circuit separator or a separator end section SCM, SCF or SCD to permit different voltage potentials on each series jumper bar
accessory.
Assembled jumper bar
BJM
Two versions of this accessory are available.
Fractionable model, composed of captive screws on a jumper bar system. This accessory
can be used for connecting consecutive blocks only.
without IP20 protection (standard)
with IP20 protection (touchproof)
Simplified model, composed of a bar prepunched to the spacing of the blocks, and of
captive screws and spacers. This accessory can be used for connecting blocks which are
consecutive or not : in this case remove the screw and spacer which are not required.
without IP20 protection (standard)
with IP20 protection (touchproof)
Current
capacity, Amps
Current
capacity, Amps
Current
capacity, Amps
Current
capacity, Amps
BJM5
BJMI5
BJM5D
BJMI5D
24 A
24 A
24 A
24 A
24 A
BJM6
32 A
32 A
32 A
32 A
32 A
BJM8
41 A
41 A
41 A
41 A
41 A
for MA 2,5/5 blocks
2 poles 1SNA 176 273 R0100
3 poles 1SNA 176 274 R0200
4 poles 1SNA 176 275 R0300
5 poles 1SNA 176 276 R0400
10 poles 1SNA 176 277 R0500
for M 4/6 blocks
2 poles 1SNA 168 516 R2500
3 poles 1SNA 168 517 R2600
4 poles 1SNA 168 518 R0700
5 poles 1SNA 168 519 R0000
10 poles 1SNA 168 973 R0700
for M 6/8 blocks
2 poles 1SNA 168 520 R0500
3 poles 1SNA 168 521 R2200
4 poles 1SNA 168 522 R2300
5 poles 1SNA 168 523 R2400
10 poles 1SNA 168 974 R0000
Max. recommended torque : 0.6 Nm
BJD
24 A
24 A
24 A
24 A
24 A
BJMI6
32 A
32 A
32 A
32 A
32 A
BJMI8
41 A
41 A
41 A
41 A
41 A
for MA 2,5/5 blocks
2 poles 1SNA 176 278 R1600
3 poles 1SNA 176 279 R1700
4 poles 1SNA 176 280 R0500
5 poles 1SNA 176 281 R2200
10 poles 1SNA 176 282 R2300
for M 4/6 blocks
2 poles 1SNA 176 663 R0000
3 poles 1SNA 176 664 R0100
4 poles 1SNA 176 665 R0200
5 poles 1SNA 176 666 R0300
10 poles 1SNA 176 667 R0400
for M 6/8 blocks
2 poles 1SNA 176 669 R1600
3 poles 1SNA 176 670 R1300
4 poles 1SNA 176 671 R0000
5 poles 1SNA 176 672 R0100
10 poles 1SNA 176 673 R0200
Max. recommended torque : 0.6 Nm
Assembled jumper bar
Only one version of this accessory is available
Simplified model, composed of a bar prepunched to the spacing of the blocks, and of
captive screws and spacers. This accessory can be used for connecting blocks which are
consecutive or not : in this case remove the screw and spacer which are not required.
without IP20 protection
24 A
24 A
24 A
24 A
24 A
BJM6D
32 A
32 A
32 A
32 A
32 A
BJM62
32 A
32 A
32 A
32 A
32 A
32 A
32 A
32 A
32 A
BJM65
32 A
32 A
32 A
32 A
32 A
32 A
BJM10
57 A
57 A
57 A
57 A
57 A
BJM12
76 A
76 A
76 A
76 A
76 A
BJM16
Current
capacity, Amps
BJD6
24 A
24 A
24 A
24 A
24 A
24 A
for D 2,5/6.D blocks, triple deck
2 poles 1SNA 178 024 R2500
3 poles 1SNA 178 025 R2600
4 poles 1SNA 178 026 R2700
5 poles 1SNA 178 027 R2000
10 poles 1SNA 178 032 R2500
20 poles 1SNA 178 033 R2600
Max. recommended torque :
ABB Entrelec
0.6 Nm
110 A
110 A
110 A
110 A
110 A
BJM4
17,5 A
17,5 A
17,5 A
17,5 A
for MA 2,5/5.D blocks
2 poles 1SNA 176 226 R2200
3 poles 1SNA 176 227 R2300
4 poles 1SNA 176 228 R0400
5 poles 1SNA 176 229 R0500
10 poles 1SNA 176 230 R0200
for M 4/6.D blocks
2 poles 1SNA 173 515 R1100
3 poles 1SNA 173 516 R1200
4 poles 1SNA 173 517 R1300
5 poles 1SNA 173 519 R2500
10 poles 1SNA 173 520 R2200
for D 4/6.LNTP, DR 4/6 blocks
2 poles 1SNA 173 217 R2600
3 poles 1SNA 173 218 R0700
4 poles 1SNA 173 219 R0000
5 poles 1SNA 173 221 R2200
6 poles 1SNA 174 112 R1600
7 poles 1SNA 174 113 R1700
8 poles 1SNA 174 114 R1000
9 poles 1SNA 174 115 R1100
10 poles 1SNA 173 226 R2700
for M 4/6,5.3G blocks
2 poles 1SNA 174 764 R0300
3 poles 1SNA 174 765 R0400
4 poles 1SNA 174 766 R0500
5 poles 1SNA 174 767 R0600
10 poles 1SNA 174 768 R1700
25 poles 1SNA 174 769 R1000
for M 10/10 blocks
2 poles 1SNA 173 611 R2100
3 poles 1SNA 173 612 R2200
4 poles 1SNA 173 613 R2300
5 poles 1SNA 173 614 R2400
10 poles 1SNA 173 615 R2500
for M 16/12 blocks
2 poles 1SNA 179 618 R1600
3 poles 1SNA 179 619 R1700
4 poles 1SNA 179 620 R1400
5 poles 1SNA 179 621 R0100
10 poles 1SNA 179 622 R0200
for M 35/16 blocks
2 poles 1SNA 179 613 R0100
3 poles 1SNA 179 614 R0200
4 poles 1SNA 179 615 R0300
5 poles 1SNA 179 616 R0400
10 poles 1SNA 179 617 R0500
for DR 1,5/4 blocks
2 poles 1SNA 205 735 R0600
3 poles 1SNA 205 736 R0700
5 poles 1SNA 205 737 R0000
10 poles 1SNA 205 738 R1100
Max. recommended torque :
except for BJM16 (1.2 Nm)
24 A
24 A
24 A
24 A
24 A
BJMI6D
32 A
32 A
32 A
32 A
32 A
BJMI10
57 A
57 A
57 A
57 A
57 A
BJMI12
76 A
76 A
76 A
76 A
76 A
for MA 2,5/5.D blocks
2 poles 1SNA 176 736 R2100
3 poles 1SNA 176 737 R2200
4 poles 1SNA 176 738 R0300
5 poles 1SNA 176 739 R0400
10 poles 1SNA 176 740 R1100
for M 4/6.D blocks
2 poles 1SNA 179 668 R2000
3 poles 1SNA 179 669 R2100
4 poles 1SNA 179 670 R2600
5 poles 1SNA 179 671 R1300
10 poles 1SNA 179 672 R1400
for M 10/10 blocks
2 poles 1SNA 176 675 R0400
3 poles 1SNA 176 676 R0500
4 poles 1SNA 176 677 R0600
5 poles 1SNA 176 678 R1700
10 poles 1SNA 176 679 R1000
for M 16/12 blocks
2 poles 1SNA 179 626 R0600
3 poles 1SNA 179 628 R1000
4 poles 1SNA 179 629 R1100
5 poles 1SNA 179 630 R1600
10 poles 1SNA 179 631 R0300
for M 35/16 blocks
110 A 2 poles 1SNA 206 217 R0000
110 A 3 poles 1SNA 206 218 R1100
110 A 4 poles 1SNA 206 219 R1200
110 A 5 poles 1SNA 206 220 R1700
110 A 10 poles 1SNA 206 221 R0400
BJMI16
Max. recommended torque :
except for BJMI16 (1.2 Nm)
0.6 Nm
0.6 Nm
589
H
1

Download Report