Revco Catalog - Purity Cylinder Gases

2014/15 BUYING GUIDE
We have you covered with safety & comfort for the workplace
Information
02
Leather Terminology
In general, thick animal hides can be split into two or more usable layers – the grain layer on top and the split layer(s) underneath.
Grain
Split
The grain layer is the outermost layer of the hide (the skin side).
This layer is considered the choicest part of the hide due to its
pleasing appearance as well as its durability. These attributes
along with rising global demand for its use in cars, furniture,
purses, jackets, shoes, and wallets all drive prices higher. Grain
leather is commonly used with the smoother side facing out but
can also be used in reversed or brushed grain variations. See the
information to the right.
Once the top grain layer has been removed, the
remaining layer(s) are split off into split leather
which is generally not as strong as the grain layer.
Also known as suede, they can be identified by
their varying scruffy textures on both sides. Cowhide is thick enough to yield several layers of split
leather, whereas other hides such as goatskin are
too thin to split. Reversed Grain
Grain leather can be employed in its reversed state with the
scruffy side facing out. When used for gloves in this way, it is
the smoother, grain-textured side that makes contact with
the hand and helps improve feel and dexterity.
Grain
Reversed
Grain
Brushed Grain
The grain leather side can also be brushed to a velvety finish in
order to blend away cosmetic defects. Also known as “nubuck”,
brushed grain should not be confused with “suede”, which is
derived from split leather.
Split
Various Animal Leathers
Cowhide
Goatskin
Elkskin
Perhaps the most versatile of all leathers, cowhide
is very durable, sufficiently supple when properly
tanned, and can yield a wide range of distinct quality
grades from a single hide. These quality characteristics make it suitable for anything from welding and
work gloves to welding jackets and accessories.
Pound for pound, goatskin is comparable in its abrasion
resistance to any of our other leathers. Its showcase characteristic is its soft and supple nature, which enables excellent dexterity. With its relatively thin cuts and pliability,
goatskin is suitable for making most high dexterity gloves.
Softer and more padded than many other leathers, elkskin is
the top-shelf leather of choice for our premium stick welding
and driver’s gloves. Its generally good performance, superior
softness, and natural insulation make grain elkskin stand in a
league of its own. It is available in heavy thicknesses allowing
us to take heavier cuts suitable for premium welding gloves.
Pigskin
Kidskin
Deerskin
Pigskin is a resilient and moderately supple leather.
The hide is not as thick as cowhide, nor is it as dense.
The result is a lighter-weight leather with some inherent insulative characteristics that is suitable for making a wide range of medium thickness performance
gloves and apparel.
The thinnest of all the leathers Revco offers, kidskin is
young goat and generally yields softer and more supple
leather. We use these hides for TIG welding gloves where
dexterity is of the highest importance but reasonable durability and abrasion resistance is also expected.
Deerskin often comes in rather heavy thicknesses, and offers
much of the same excellent softness and natural insulation as
elkskin. Medium to heavy cuts of split deerskin are used for our
premium MIG welding gloves while thin-cut split deerskin is
used for our high-dexterity TIG welding gloves.
Leathers for Apparel
Fabrics for Apparel
50 Wash FR
Standard Cowhide
Revco uses flame-resistant treated cotton or cotton blend fabrics, typically in 9 oz. and
12 oz. weights, to provide light-weight, breathable protection. Garments made from
this fabric keep their FR properties for up to 50 wash cycles. This class of fabrics is common for welding apparel where direct contact with light sparks and spatter require
more frequent replacement of the garments. This fabric may also be used in apparel for
other applications, such as those for NFPA 70E arc flash protection when manufactured
in compliance with those guidelines. Refer to the label(s) on the garments for full information.
Revco’s standard split cowhides offer the right balance between performance and
value. They are the preferred choice of leather for our core line of leather welding garments. These leather selections are reliably strong and durable; they perform very well
against sparks, light spatter, and abrasion; and they still retain a good degree of pliability
that is important for all garments.
Nomex®
DuPont’s Nomex® is inherently flame resistant and a popular choice for high-performance protective wear. Refer to the label(s) on the garments for full information.
Locally Owned and
Operated Since 1938
Grain Pigskin
Pigskin is a resilient leather with a wide range of attributes, including its relatively light
weight, a natural degree of insulation, and reasonable resistance to abrasion. These
factors make pigskin a good choice for crafting versatile, light weight welding apparel.
As pigskin hides tend to be on the thin side, we typically use full grain leather to ensure
proper performance.
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
BSX® Xtreme Welding Gear
03
Welder’s collar
BSX® Advanced FR Cotton
Welding Jacket
9 oz. FR treated cotton. Welder’s collar.
Extended length front. Dual scribe and
inside pockets. Zippered inside pocket.
Bx9c Flame graphic on arms. (S-5xl)
S-XL
2XL-5XL
$33.90
Call for pricing
Adjustable
waist straps
BSX® Advanced FR Cotton
Welding Jacket
Snap front
and wrists
9 oz. FR treated cotton. Welder’s collar. Extended
length front. Dual scribe and inside pockets.
Zippered inside pocket.
Zippered inside pocket
bxRB9C Black/royal blue. (s-5xl)
Extended
length front
BX9C
BSX® Advanced Grain Pigskin &
FR Cotton Welding Jacket
Hybrid™ 9 oz. FR treated cotton with grain
pigskin sleeves. Welder’s collar. Extended
length front. Dual scribe and inside pockets.
Zippered inside pocket.
bXRB9c/ps (s-5xl)
S-XL
2XL-5XL
BSX® Advanced Cape Sleeves
9 oz. FR treated cotton. Welder’s collar.
NoGap™ bib dock. Sold separately.
bx21cs Cape sleeve. (s-5xl)
S-XL
2XL-5XL
$31.90
Call for pricing
S-XL
2XL-5XL
BSX® 19” FR Cotton
Welding Sleeves
9 oz. FR cotton. Reinforcement layer. Wide arm
elastic. Sold by the pair.
BX9-19S-RB Black/royal blue. (One Size)
BX9-19S-BK Black/red. (One Size)
$15.90
$106.30
Call for pricing
Locally Owned and
Operated Since 1938
$33.90
Call for pricing
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
BSX® Xtreme Welding Gear
04
BSX® Feature-Rich MIG
Welding Gloves
BSX® Advanced Ergonomic
Fit Stick Welding Gloves Premium grain pigskin palm. Split
cowhide back. Padded palm. DragPatch®.
RestPatch®. Lined. Kevlar® stitched.
Premium grain pigskin palm. Split cowhide back. Reinforcements. DragPatch®.
Lined. Kevlar® stitched.
BM88 (s-2xl)
BS50 (s-2xl)
$41.90
$21.90
BSX® FR Snug-Fit Strap Cuff
TIG Welding Gloves
Premium grain kidskin palm. FR treated
cotton back and lining. Unlined palm.
DragPatch®. Kevlar® stitched.
BT50 (s-2xl)
BSX® Doo Rag
Cotton. Terry sweatband on inside front.
BC5D-BK (One Size)
$4.50
Cotton. Double-layer construction.
Neck protection.
Bc5W-BK (One Size)
$6.80
$36.50
Locally Owned and
Operated Since 1938
BSX® Comfortable Welding
Cap with Elastic
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
Stick Welding Gloves
05
Kevlar®
stitched
Elkskin with FR Nomex® Lined
Back
Grain elkskin back. Unlined reversed grain
palm. Thumb strap. Rigid cuff. Kevlar®
stitched.
850 (S-2XL)
$31.70
Protective
rigid cuff
BSX® Advanced Ergonomic
Fit Stick Welding Gloves
Premium grain pigskin palm. Split cowhide
back. Reinforcements. DragPatch®. Lined.
Kevlar® stitched.
Genuine durable
grain elkskin
BS50 (s-2xl)
$41.90
Thumb strap
reinforcement
Unlined high-dexterity
reversed grain palm
Snap-on Heat Shield Ready
Split cowhide. CushionCore™ lined. Kevlar®
stitched. Heat shield sold separately.
580 (l)
580LH Left hand only. (l)
$24.50
$13.00
Dependable with Wide
Reinforcements
Split cowhide. CushionCore™ lined.
Kevlar® stitched.
320 (S-2XL)
$13.90
Locally Owned and
Operated Since 1938
Standard with
Reinforcements
Wide Palm Guard
Split Cowhide
110 (S-XL)
113 (L)
Snap-On Heat Shields
Heat shield for 580. Aluminized fiberglass.
Cushion lined. Kevlar® stitched.
Cotton lined. Kevlar® stitched.
$11.90
$10.70
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
580an Additional Nomex® layer. (One Size)
$15.00
MIG Welding Gloves
MightyMIG® Premium High
Dexterity
Reversed grain deerskin. CushionCore™
lined back. Unlined palm. Kevlar® stitched.
06
Kevlar®
stitched
39 (XS-XL)
$21.90
Insulated back
Reversed grain
deerskin comfort
BSX® Feature-Rich MIG
Welding Glove
Premium grain pigskin palm. Split
cowhide back. Padded palm. DragPatch®.
RestPatch®. Lined. Kevlar® stitched.
BM88 (s-2xl)
$21.90
High-dexterity
unlined palm
Classic Unlined Grain Cowhide
Classic Unlined Grain Pigskin
25 (S-XL)
26 (S-XL)
Seamless index finger. Kevlar® stitched.
$15.90
Locally Owned and
Operated Since 1938
Seamless index finger. Kevlar® stitched.
$14.30
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
Mighty MIG® Standard
Split cowhide. CushionCore™ lined
back. Unlined palm. Kevlar® stitched.
39adv (S-XL)
$12.30
TIG Welding Gloves
07
High-Dexterity Premium
Grain Kidskin
Must-Try Advanced with
Snug-Fit FR Back
BSX® FR Snug-Fit
Strap Cuff
DragPatch®. Kevlar® stitched.
Extra premium grain kidskin palm. FR
treated cotton back and lining.
Unlined palm. DragPatch®. Kevlar® stitched.
Premium grain kidskin palm. FR
treated cotton back and lining. Unlined
palm. DragPatch®. Kevlar® stitched.
25K Standard cuff. (Xs-2xl)
$19.90
T50 (s-2xl)
BT50 (s-2xl)
$36.50
High-Dexterity Premium
Grain Kidskin
DragPatch®. Kevlar® stitched.
24K Short cuff. (s-xl)
$19.00
Locally Owned and
Operated Since 1938
$31.90
Feature-Rich Classic
Grain Kidskin
CushionCore® lined back. Seamless index
finger. DragPatch®. Kevlar® stitched.
35KF (s-2xl)
$15.50
Economy Classic
Grain Kidskin
Classic Thicker
Grain Goatskin
Seamless index finger. Kevlar® stitched.
Kevlar® stitched.
35KE Standard cuff. (s-xl)
25G (s-xl)
$12.70
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
$12.40
Mechanic’s Gloves
ToolHandz® Premium
Extreme Duty with Guards
Synthetic leather palm with heavy duty
reinforcements. Full coverage protective
guards. Ventilated Internal impact layer.
Snug spandex fit.
GX105 (M-2XL)
08
ToolHandz®
Heavy Duty with Guards
ToolHandz® Premium
Thick Synthetic Leather
GX100 (M-2XL)
99PLUS-BLK (S-2XL)
Synthetic leather vibration-dampening
palm. Full coverage guards. BumpPatch®.
Reinforced. Snug spandex fit.
$29.90
$36.90
FlexHand™
Economy Reinforced
Premium synthetic leather palm.
Reinforced palm and fingertips. Snug
spandex fit.
Synthetic leather palm.
Snug spandex/neoprene fit.
19fx-BLK (S-2XL)
$12.90
$16.60
Driver’s Gloves
Kevlar® Stitched
Grain Cowhide
Resilient Grain Pigskin
Inside seam. Keystone thumb.
Split cowhide back. Outside seam.
Keystone thumb.
9P (S-XL)
$12.50
97K (S-2XL)
$12.90
Classic Value Choice
Grain cowhide palm. Split cowhide
back. Outside seam. Keystone thumb.
Premium High-Dexterity
Grain Goatskin
Inside seam. Keystone thumb.
9G (S-XL)
97 (S-XL)
$11.00
$11.10
Economy Resilient
Grain Pigskin
Outside seam. Straight thumb (may vary).
9PB (S-XL)
$8.20
Locally Owned and
Operated Since 1938
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
Leather Palm & Industrial Gloves
09
Classic Split Cowhide
Rubberized short cuff. Heavy split
cowhide.
Rubberized
short cuff
6B (L)
$3.90
Heavier shoulder
split cowhide
Rugged Split Cowhide
Full Leather Back
Rubberized cuff. Kevlar® stitched.
5F Short cuff. (L)
$7.50
Split Cowhide
Full Leather Back
Plasticized cuff.
5FB Short cuff. (L)
$5.80
16 oz. Cotton Golden Chore
8 oz. Cotton Canvas
9 oz. Cotton Jersey
4078 (L)
1108 (S, L)
1109 (S, L)
Knit wrist.
$3.50
Locally Owned and
Operated Since 1938
Knit wrist.
Cotton/Polyester String
Knit with Gripping Dots
Knit wrist.
$1.40
Reversible.
$1.30
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
2118 (S-XL)
$1.30
10
Cut Resistant Gloves
Arc Rated and Cut Resistant
Grain cowhide palm. Split cowhide back.
Outside seam. Keystone thumb. Kevlar®
stitched. ATPV = 22 cal/cm². ANSI cut level 2.
97CR (M-2XL)
AccuFlex™ Cut-Resistant
Latex Coated
10 gauge Kevlar®.
GC103 (S-XL)
$12.30
$21.50
Kevlar® Knit FR Sleeve
Double layer. Cut, abrasion, and
flame resistant. ANSI cut level 4.
Sold individually.
Kevlar® Knit Gloves
KK-23S 23” length. (One Size)
Reversible. ANSI cut level 2.
KN-18G (L)
$9.50
$9.90
KK-18S 18” length. (One Size)
$9.20
Dipped Gloves
AccuFlex™ Tough
Nitrile Foam Coated
AccuFlex™ Tough
Nitrile Coated
GC2036 (S-XL)
GC2030-GY (S-XL)
13 gauge nylon. Foam cushioned texture.
13 gauge nylon. Smooth texture.
$2.00
AccuFlex™ Latex Coated
Value Latex Coated
10 gauge cotton/polyester string knit.
Crinkle textured grip.
Cotton/polyester string knit.
2300EE (S-XL)
GC1135-GY (S-XL)
$3.10
Locally Owned and
Operated Since 1938
$1.80
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
$1.60
Flame Resistant Apparel
11
FR Cotton Classic Welding Jackets
Inside pocket and scribe pocket. Snap front and wrists.
F9-30C 9 oz., 30” length, green. (S-6XL)
S-XL
2XL-4XL
$23.90
Call for pricing
F2-30C 12 oz., 30” length, green. (S-4XL)
S-XL
2XL-4XL
$31.50
Call for pricing
Special Order FR Jackets
Available in red, brown, orange, lime green, and navy
FO9-30C
FB2-30C
Custom imprint
options available
F9-30C
FL9-30C
FR9-30C
FN9-30C
FR Cotton Welding Jackets with
2” FR Reflective Tape
Inside pocket and scribe pockets. Snap front and wrists. Pass-through
for fall protection harness.
Back
Back
JF1012-LM 30” length, 9 oz., lime green. (S-4XL)
JF1012-OR 30” length, 9 oz., orange. (S-4XL)
JF1012-LM (Front)
JF1012-OR (Front)
CableNotch™
Locally Owned and
Operated Since 1938
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
S-XL
2XL-4XL
$58.50
Call for pricing
Flame Resistant Apparel
12
FR Cotton Work Shirts
FR treated cotton. Long sleeves.
Back view
FS7-KHK 7 oz., khaki. (S-4XL)
S-XL
2XL-4XL
$37.90
Call for pricing
FR Cotton Coveralls
FS8-DNM 8 oz., denim. (S-4XL)
S-XL
2XL-4XL
FR treated cotton. Pass-through front pockets.
Inside adjustable waist. Blank name badge. 32”
inseam. 9 oz., navy, FR reflective tape.
$40.90
Call for pricing
FN9-32CA/PT/RTT (S-4XL)
S-XL
2XL-4XL
$103.30
Call for pricing
FR Cotton Sleeves
with Elastic Wrist
Sold by the pair.
F9-18S 18” length, 9 oz., green. (One Size)
FR Cotton Bib Aprons
$6.00
FR treated cotton. 36” length, 9 oz.
F9-36A (One Size)
F9-23S 23” length, 9 oz., green. (One Size)
$10.90
$7.80
F2-18S 18” length, 12 oz., green. (One Size)
$8.50
FR Cotton Bibs for
Cape Sleeves
F9-18S
F2-23S 23” length, 12 oz., green. (One Size)
FR treated cotton. Snap attachment.
20” length, 9 oz.
$14.30
F9-20B (One Size)
$6.50
FR Cotton Sleeves
with Cuff Elastic Wrist
Sold by the pair.
FR Cotton Cape Sleeves
F9-218S 18” length, 9 oz., green. (One Size)
$7.90
F9-223S 23” length, 9 oz., green. (One Size)
F9-218S
Locally Owned and
Operated Since 1938
FR treated cotton. Scribe pocket.
Snap front and wrists. 9 oz.
F9-21CS
with F9-20B
F9-21CS (S-4XL)
Back view $9.30
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
S-XL
2XL-4XL
$18.30
Call for pricing
Hi-Vis Apparel
13
S
RESISTS SPARRK
& SPATTFREcotton
Pass-through
for fall harness
Welder’s collar
*
ar
better than regul
FR reflective
tape
Scribe
pocket
ExoArc™ Class 3 Hi-Vis Compliant
Performance Welding Jacket*
Inherent† FR fabric. ANSI/ISEA 107-2010 Class 3 hi-vis compliant.
NFPA 70E compliant. Arc rated: HRC 2, ATPV = 10.6 cal/cm².
Inside pocket and scribe pocket. Pass-through for fall harness. 2” FR
reflective tape. Welder’s collar. Kevlar® stitched. Made with NFPA
2112 compliant base material and reflective tape.
Back
JF4312-HY 30” length, 9 oz, hi-vis yellow. (S- 5XL)
S-XL
2XL-4XL
Inside
pocket
$218.00
Call for pricing
Concealed
snaps
Front
Made in U.S.A.
*Resists pinholing from weld spatter, as observed during internal testing. † 100% inherent flame-resistance will never wash out or wear out when laundered properly.
FR Cotton Classic
Welding Jacket
Inside pocket and scribe pocket. Snap front
and wrists. 9 oz., 30” length, lime green.
FL9-30C (S-4XL)
S-XL
2XL-4XL
$26.80
Call for pricing
Locally Owned and
Operated Since 1938
Surveyor’s Knit/Mesh
Safety Vest
ANSI/ISEA 107-2004 Class 2 compliant.
Silver on orange reflective tape. Zipper.
4 outside front pockets. 2 inside front pockets.
svy220 (M-4XL)
M-2XL
3XL-4XL
$15.20
Standard Mesh Safety Vest
ANSI/ISEA 107-2004 Class 2 compliant.
2” wide reflective tape on front and back.
Zipper. Inside front pocket.
svy205 (M-4XL)
M-2XL
3XL-4XL
Call for pricing
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
$10.40
Call for pricing
Leather Welding Apparel
14
Full-Feature Split Cowhide
Welding Jackets
Premium Lightweight DuraLite™
Grain Pigskin Welding Jackets
Corduroy collar. Satin-lined shoulders.
Outside pocket and scribe pockets. Gusseted
underarms. Kevlar® stitched.
Premium grain pigskin. Corduroy-lined collar. Inside and
scribe pockets. Satin-lined inside shoulders. Kevlar® stitched.
30PWC 30” length, tan. (S-3XL)
S-XL
2XL-3XL
30WC 30” length. (S-5XL)
$173.00
S-XL
2XL-5XL
Call for pricing
$101.90
Call for pricing
30PWC-BLK 30” length, black. (M-3XL)
M-XL
2XL-4XL
$182.50
Call for pricing
Durable Cowhide
Cape Sleeves
Split cowhide. Gusseted underarms.
Satin-lined shoulders. Scribe pockets.
Kevlar® stitched.
Durable Cowhide/FR Cotton
Welding Jacket
21CS (S-4XL)
FR treated cotton with split cowhide sleeves.
Inside pocket and scribe pockets. Snap front and
wrists. 9 oz., 30” length, royal blue.
S-XL
2XL-4XL
FRB9-30C/BS (S-4XL)
S-XL
2XL-4XL
$61.90
Call for pricing
$55.30
Call for pricing
21CS with
20WB
Back view
Durable Cowhide
Split-Leg Aprons (Chaps)
Durable Cowhide
Bibs for Cape Sleeves
Split cowhide. Adjustable waist
strap. Kevlar® stitched.
20WB 20” length. (One Size)
$19.20
Side split cowhide. Kevlar® stitched.
40WS 40” length. (One Size)
$50.90
Durable Cowhide
Bib Aprons
Side split cowhide. Kevlar® stitched.
Durable Cowhide
Waist Aprons
36A 36” length. (One Size)
$35.10
Side split cowhide. Kevlar® stitched.
24WA 24” length. (One Size)
$23.60
Locally Owned and
Operated Since 1938
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
42A 42” length. (One Size)
$41.90
Accessories & Welding Blankets
15
BSX® Extreme Welder’s Gearpack
Welder’s Tool Bag with Roomy Access
GB100 (One Size)
GB150 (One Size)
Compartments for welding tools. Dual welding glove
pockets. Padded HelmetCatch™ fits all helmets.
Inside pockets and zippered end pocket.
Accommodates welding helmet and tools.
$54.90
$97.70
Classic Backpad
Aluminized fiberglass. Double layer
construction. Sold individually.
BP (One Size)
$5.40
Flexible Carbon
Fiber Backpad
Aluminized fiberglass. Carbon fiber felt
under layer. Double layer construction.
Sold individually.
BP-CB (One Size)
$8.20
Cable Cover with
Snap Closure
Cable Cover with
Hook and Loop Closure
134 1¾” diameter opening.
C134V 1¾” diameter opening.
Split cowhide. Sold by the foot.
114 1¼” diameter opening.
Split cowhide. Sold in 5 foot increments.
$5.70
$5.40
$4.80
Medium Duty 30 oz.
Welding Blanket
Heavy Duty 16 oz.
Welding Blanket
b-nfg30-6X6
b-CBN16-6X6
Gold Acrylic coated fiberglass. FM approved.
1000° F melting temperature. 053” thickness.
Sparks, spatter & abraision resistancerements.
$52.00
b-nfg30-8X8
b-nfg30-10X10
$96.00
$150.00
Locally Owned and
Operated Since 1938
$6.20
C114V 1¼” diameter opening.
Call Purity Cylinder Gases for more information.
Product availability & prices subject to change.
1-888-532-2375 www.puritygas.com
Black carbon fiber felt. 1800° F melting
temperature. 170” thickness. Sparks, spatter,
slag auto industry applications.
b-CBN16-8X8
b-CBN16-10X10
$115.20
$243.20
$380.00
Heavy Duty Welding Screens and Frames
•
•
•
•
•
•
Heavy duty black powder coated 1” diameter square tube framing
Weightier system for added footing stability
Snap-fit design for quick and easy assembly without tools
Sturdy platform legs included and easily removable for storage
Smaller packaging for convenient shipping and display
Double-hinged connector system provides a greater variety of muti-panel
configurations, including close-flat for storage
6X6VSQF1-ORA 6’x6’ single panel frame with orange screen
$118.20
6X8VSQF1-ORA 6’x8’ single panel frame with orange screen
$135.80
Standard Welding Screens and Frames
•
•
•
•
•
Durable black powder coated 1” diameter round tube framing
Less weighty design for more convenient mobility
Snap-fit design for quick and easy assembly without tools
Sturdy platform legs included and easily removable for storage
Smaller packaging for convenient shipping and display
6X6VF1-ORA
6’x6’ single panel frame with orange screen
$91.70
6X8VF1-ORA
6’x8’ single panel frame with orange screen
$110.80
6X10VF1-ORA
6’x10’ single panel frame with orange screen
$120.90
Strip Curtains – Full Set (Custom curtains available)
Verilon® strip curtains block over 99% of UV
radiation (200-400 nm) and is suitable for
welding, spraying, grinding, and sand blasting
enclosures. The curtains are flame resistant,
highly transparent, and noise deadening, while
preventing dangerous near-UV and UV radiation from penetrating to adjacent areas. Meets
CPAI-84 and California Fire Marshall requirements for flame resistance.
Call us or stop in for additional information regarding our services and options.
Angola
(260) 665-7241
Battle Creek
Elkhart
(574) 389-8760
Fort Wayne
Lansing
(517) 321-9555
Mt. Pleasant
Traverse City
(231) 922-0851
Warsaw
616-532-2375
888-532-2375
(269) 660-1907
(260) 497-7565
(989) 775-0898
(574) 267-6066
Cadillac
Kalamazoo
Saginaw
www.puritygas.com
(231) 779-2468
(269) 344-0518
(989) 755-4344
Grand Rapids
Locally Owned and
Operated Since 1938
©2014 Revco Industries, Inc. V.0614-04

Download Report