Te Integrated man-machine interface components

Integrated man-machine interface components
Operator terminal
Characteristics :
page 42408/3
References :
page 42408/3
Description
The TSX M37 PKG V52 operator terminal can be connected to the various X-WAY networks. It is an industrial
microcomputer with a flat slim screen (190 mm) and can be fixed in a 19” rack or flush-mounted in a console. This terminal
is based on a CCX 77 FP cell controller.
As standard it includes keyboard drivers, VGA screen serial/parallel ports, Telemecanique ports and 2 discrete outputs.
The basic power supply is compatible with industrial supplies c 110 to 127 V or c 220 to 240 V/47 to 63 Hz and accepts
a mains adaptor for a a 24 V supply as an extension.
The operator terminal is configured using MONITOR 37 V52 man-machine interface software and connects directly to
a UNI-TELWAY bus via its own connecting cable.
It is possible to create an operator terminal on a PC compatible terminal with the disk version of the MONITOR 37
run-time software : TSX L M37 RT1 V52M.
Description
1 A 9.5” STN double SCAN high definition VGA colour
screen.
1
10
2
2 A 27-key operator keyboard (numeric keypad and cursor
pad with dual marking) mounted on a vertical panel and
screen brightness and contrast controls.
3 A 3” 1/2 standard format disk drive.
4 A slot for 2 software keys with access rights for
Telemecanique software (standard TE 90).
5 An select/inhibit key for the operator keyboards and the
PS/2 type extension keyboard, and processor reset.
6 A PS/2 compatible extension keyboard input port (rear
connector moved to front panel).
8
3
4
6 9 5
7
7 An RS 232 C serial port (COM1) (remote rear connector
moved to front panel).
8 An operator keyboard comprising 2 series of 12 dust and
damp proof function keys (F1 to F12 and Shift F1 to
Shift F12 with dual alphanumeric marking), mounted on
a horizontal panel.
9 A processor reset button.
10 An RS 485/current loop serial port (COM2)
(connection to UNI-TELWAY bus).
Integration into X-WAY architectures
CCX
ETHWAY/FIPWAY
42408/2
Te
The TSX M37 PKG V52 operator terminal has 3 AT/ISA bus
compatible slots (long format). These slots can receive,
among others, extension cards for connection to the
ETHWAY/FIPWAY network or FIPIO bus, connection to
the UNI-TELWAY bus being offered as standard.
It is possible to install up to 4 man-machine interface
terminals per PLC. These terminals can either be TSX M37
PKG V52 operator terminals or TSX PCM 37 modules used
with TSX/CPX 37 consoles.
Integrated man-machine interface components
Operator terminal
Characteristics, references
Environment
Temperature
Relative humidity
Altitude
Dust/damp protection (front/rear)
Power supplies
°C
m
Basic
Apparent power
Extension
V
VA
V
Operating : 5…40, storage : - 40…+60
30…95 %
0…3000
IP 65 (front panel), IP 20 (rear panel)
c 110…127 or c 220…240, 47…63 Hz
170
a 24
Characteristics
Processor
Hard disk
RAM memory
Disk drive
Integrated screen
Keyboard
I/O ports
Discrete outputs
Integrated
Extension
Standard
PLC
Output 1
Output 2
Operating security
Extension cards
80486 SX at 25 MHz
210 M bytes
4 M bytes
3” 1/2 (1.44 Mb and 720 Kb)
Flat LCD 9.5” VGA colour (640 x 480 pixels)
50 keys with dual marking
PS/2 or FTX 507/517 compatible, with front or rear connection
RS 232 C serial port, PS/2 mouse, parallel port
RS 485 port, UNI-TELWAY, ETHWAY network with TSX ETH PC 101 extension card
FIPWAY network or FIPIO bus with TSX FPC 10 extension card
Alarm
Batteries discharged at 90 %. Can be programmed by the user
“Watch dog” default. Can be programmed by the user
Access via tamper-proof passwords
Telemecanique software protection keys
Individual tamper-proof serial number
3 standard AT/ISA bus slots (long format)
References
The MONITOR 37 V52 man-machine run-time software and hardware package includes as standard :
- a DOS operating system,
- a T CCX 77 FP 6 C2 M terminal with documentation in English and French,
- TSX L M37 RT1 V52 M software,
- a T FTX CB2 030 cable for connection to the UNI-TELWAY bus.
Description
Composition
MONITOR 37 V52
CCX 77 terminal with
software and man-machine TSX L M37 RT1 V52M software
interface hardware package
MONITOR 37 V52
2 3"1/2 diskettes,
man-machine interface
1 software key
software for PC compatible A5 documentation
with UNI-TELWAY driver
Hardware extensions
Description
Reference
(1)
TSX M37 PKG V52 M
TSX L M37 RT1 V52 M
Size
Reference
Weight
kg
1 slot
available for
memory
extension
4 M bytes
T CCX RAM 54
0.160
8 M bytes
T FTX RAM 58
0.160
16 M bytes
T FTX RAM 516
0.160
Extension for
a 24 V adaptor
Base for mounting the
a 24 V adaptor
Adaptor for
a 24 V supply
Requires extension T FTX CHG 51
T FTX ADC 5
Included with product
Format
Reference
Supplied with
DOS and OS/2 drivers
Short
TSX ETH PC 101M
Optional cards
Description
ETHWAY network card
0.700
Use
TSX M37 PKG V52 M
Dynamic RAM
memory extensions
Weight
kg
17.000
T FTX CHG 51
0.420
0.360
Weight
kg
0.120
FIPWAY network /FIPIO
Supplied with
Short
TSX FPC 10M
0.140
bus card
DOS and OS/2 drivers
(1) The letter M at the end of a reference indicates that the product includes documentation in English and French.
Te
42408/3

Download Report