STT Support Equipment Overview

Support Equipment
Small Tactical Terminal
ViaSat provides a range of equipment
to help test, integrate, and deploy the
Small Tactical Terminal (STT) Link 16
and UHF/VHF Networking
LAB EQUIPMENT
DEPLOYABLE RACKS
CABLES AND ACCESSORIES
»»Control and Interface Unit (CIU)
including all interconnected
cables, power supply, fan tray,
and Keypad Display Unit (KDU)
»»STT Integrated Controller
(STTIC) mobile racks providing
ruggedized all-in-one support
for tactical ground stations
(fixed, mobile, land, or sea)
»»Fan tray assembly
»»Single and dual-STT
configurations
»»Link 16 RF cables
»»Power cords
»»Microphone and headset
voice controls
»»Integration kits for field
service engineers
Lab Equipment
CONTROL INTERFACE UNIT (CIU)
PN 1115296
The ViaSat STT CIU is a rack mountable enclosure providing all power, cooling, cabling, and control functions
needed to operate the STT in a lab environment. Setup is simple, insert the STT directly into the integrated fan
tray and lock it in place, connect the CIU cables to the STT, then turn the master Power ON/OFF switch on and
you’re ready to begin operations.
Front Panel Controls and Interfaces
A Harris KDU mounts on the front panel of the CIU.
Separate power on indicators are provided for Channel 1
(UHF/VHF or Link 16) and Channel 2 (UHF/VHF). Link 16
communications health is identified by a dedicated
indicator. Front panel connectors and switches include:
»»Ethernet Host (RJ45)
»»Zeroize
»»USB (B)
»»LTTI
»»DTE Waveform
(DB 25)
»»IFF Emergency
»»Red Console (DB 9)
Rear Panel Connections
The rear panel provides an EMI-filtered AC Power
Input for the embedded 28 V power supplies, an
input connector for the 1 pulse per second external
time reference and a 28 VDC auxiliary input for
external power. Available maintenance ports and
BNC connectors for the Link 16 differential discretes:
»»Message Transmit
(output pulse)
»»Pulse Transmit
FRONT PANEL
»»IPF Monitor
Suppression
(input pulse)
»»Transmit Suppression
(output pulse)
»»Receiver Suppression
(input pulse)
(input pulse)
SPECIFICATIONS
Height 10.5 in.
Width 19 in. (front panel)
Depth 17 in.
Weight (approximate) 18 lb
Electrical Input Power100 to 264 VAC,
47 to 63 Hz, 315 W (Max)
REAR PANEL
CIU TRANSPORT CASE CONFIGURATION OPTIONS
VCU
GPS
Power
Control
LCD/
Keyboard
2U Drawer
1U Monitor/Keyboard
1U PC
7U Case
1U VCU
1146419
Headset
1144960
Microphone
1163596
Headset
X
1163597
Microphone
X
6U CIU
1U GPS
12U Case
2U Drawer
1163362
Headset
X
X
X
X
1163594
Microphone
X
X
X
X
EXAMPLE CIU TRANSPORT
CASE CONFIGURATION
Deployable Equipment
STT INTEGRATED CONTROLLER
(STTIC) MOBILE RACKS
Single-Rack Part Numbers
»»PN 1199099
»»PN 1199101 (with GPS)
»»PN 1199102 (with 20 W power amp)
»»PN 1199105 (with 20 W power amp/GPS)
Dual-Rack Part Numbers
»»PN 1199106
»»PN 1199107 (with GPS)
»»PN 1199108 (with 20 W power amp)
»»PN 1199109 (with 20 W power amp/GPS)
Leveraging the STTIC from Simmetry
Solutions, this mobile rack is designed
for rapidly-deployable and highlyinteroperable tactical communications.
Available in single-STT or dual-STT
configurations, this rack compresses an
entire Link 16 ground system into a mobile
transit case so you can easily establish,
maintain, and simultaneously participate
in Link 16 and UHF/VHF networks.
SINGLE-RACK CONFIGURATION
FRONT PANEL
REAR PANEL
STTIC RACK CONFIGURATION COMPONENTS
Single-STT
Dual-STT
4U transit case
9U transit case
STTIC (1)
STTIC (2)
2CH speaker unit
2CH speaker unit (2)
Front RF panel (N-type)
Rear dual RF panel (N-type)
Rear power and data panel
Rear power and data panel (2)
High-quality headset, H-250 handset, and extension lead
GPS for STT ETR (optional)
GPS for STT ETR (optional)
Channel 2 wideband power amplifier (optional)
Connectors and Switches
»»Message Transmit (output pulse)
»»Pulse Transmit (output pulse)
»»Receiver Suppression (input pulse)
»»IPF Monitor Suppression (input pulse)
»»Transmit Suppression (input pulse)
»»External Time Reference (input pulse)
»»Channel 1 and 2 IP and serial I/O
»»Power switch and breaker
STTIC Rack Capabilities
»»Waveform selection and monitoring
»»STT channel configuration and control
for both local and remote operation over
IP via web browser (including remote
TX/RX VoIP)
»»Crypto fill and zeroize support
»»Universal power supply for STT
and STT fan tray
»»28 VDC/ 110 to 240 VAC
ViaSat STT Support Equipment
STT CABLES AND ACCESSORIES
Part Number
Description
Cables
1132441
STT Link 16 RF Cable Set 1 meter cables for antenna A and antenna B terminating
in SMA(m) connector, suitable for interfacing to other connectors
1142080
STT Fan tray power cable (6 ft with banana plugs)
Kits
1167640
ViaSat Move Out/Jump Off (MOJO) Kit An integrated system for creating a mobile air/ground communication gateway. This system
includes a ruggedized rack-mount trasit case, integrated power DC/DC 600 W power supply with main power on/off, 20 W VHF/UHF
amplifier, chassis cooling fan, LED Indicators for power, mounting and power provisions for a ruggedized DTech Labs TXC-4 server/
router, and power/host interface and mounting provisions for a RT-1720 EPLRS radio. (See separate MOJO datasheet)
1142390
STT Field Service Engineer (FSE) Integration Kit Cables and signal breakout boxes packaged in a single, portable case enabling FSEs
to connect to and operate an installed STT while in the field. Kit includes RF and digital cables needed to mate with the front panel
connectors of the STT and KDU controller.
1124366
STT Mating Connector Kit Set of mating connectors for the STT (J1, J2, J3, J4, J5, J6, J7, J10)
Voice Control Units (VCUs)
1142642
2U STT VCUs with microphone
1142643
1U STT VCU with microphone
1142644
2U STT VCUs with headset
1142645
1U STT VCU with headset
Other Accessories
1117574
STT fan tray
1118069
FALCON® III keypad/display unit (KDU) for controlling the STT UHF/VHF channels
1044621
ptf GPS with network time server that provides 1 PPS signal suitable for use as ETR to STT
(GPS Antenna and 100 ft cable included)
STT Antenna “A”
(W-8) Cable Assembly
SMA Connector
STT Antenna “B”
(W-9) Cable Assembly
SMA Connector
MOJO KIT
FSE INTEGRATION KIT
STT LINK 16 RF CABLE SET
Power Cord
STT FAN TRAY ASSEMBLY
CONTACT
6155 El Camino Real, Carlsbad, CA 92009-1699, USA
U.S. SALESINTERNATIONAL SALES
TEL 760 476 4237
TEL +1 760 476 2342
EMAIL [email protected]
EMAIL [email protected]
WEB www.viasat.com/stt
Copyright © 2014 ViaSat, Inc. All rights reserved. ViaSat and the ViaSat logo are registered trademarks of ViaSat, Inc. FALCON and Harris are registered trademarks of Harris Corporation. All other trademarks mentioned are the
sole property of their respective companies. Specifications and product availability are subject to change without notice. This product is restricted to use by only the U.S. Military and approved international customers.
030-140915-022

Download Report