Korenix JetNet Industrial Managed Switch JetNet 5310G PoE

Korenix JetNet 5310G Release Notes
Jun, 2014
Korenix JetNet Industrial Managed Switch JetNet 5310G
SOFTWARE RELEASE Notes
Before Upgrade
Before you use the Switch firmware, please ensure that you know the product number and
use the correct firmware version. By reading the file, you can know the new feature and
changes, the fixed bugs and the restrictions. You can find the latest firmware in the Korenix
web site, http://www.korenix.com or get the help from Korenix Customer Support,
[email protected] .
About This Software Version
The version number and the release date.
Firmware
Boot Loader
Release Date
Note
V1.1
V1.0.0.5
Apr, 2012
JetNet 5310G 1st release.
V1.1a
V1.0.0.5
Nov,2012
JetNet 5310G
V1.2
V1.0.0.5
V1.2a
V1.0.0.5
May,2013
JetNet 5310G-120W start support
V1.2b
V1.0.0.5
OCT, 2013
JetNet 5310G w/loop protection
V1.3
V1.0.0.6
May,2014
V1.3a
V1.0.0.6
May,29,2014
Flash ROM Changed, Not for regular firmware upgrade! It is
only for production
Fix MAC address programming issue for production process.
V1.4
V1.0.0.6
Jun,9,2014
Internal version, IPv6
Official release for new flash ROM (941E/256Bytes), HW
version v1.2
CAUTION: You can only update the correct firmware to the JetNet switches. Ensure the
product model number before you start updating. If the version of Boot Loader is not match
with JetNet 5310G then upgrade firmware first then Boot Loader, ensure the power state is
stable during the upgrade. You can upgrade firmware and boot loader through JetView
commander.
Important!
Upgrade firmware shall follow the following sequence:

First, upgrade new version firmware by JetView utility

Secondary, upgrade new version Boot loader by JetView if Switch boot loader is old
version.

After Boot loader upgrade finished, it will auto restart system to enable the new
functions.
Korenix Confidential Documents
Korenix JetNet 5310G Release Notes
Jun, 2014
New Changes and Improvement:
The following changes applied to firmware v1.4:
■
Clone History

Clone for JetNet 5310G v1.3a firmware for hardware version v1.2- 256 bytes flash rom.
The following changes applied to firmware v1.3a:
■
Clone History:

■
Clone from JetNet 5310G V1.3 firmware.
Fix the bug of MAC address programming with Flash ROM- AT45DB642-CNU-SL945 (1024Bytes/Page).
There is no any function effect, just for production process.
The following changes applied to firmware v1.3:
■
■
Clone History:

JetNet5310G-v1.3_beta1 clones from JetNet5310G-v1.2b.

JetNet5310G-v1.3_beta2 clones from JetNet5310G-v1.3_beta1

JetNet5310G-v1.3_beta1 clones from JetNet5310G-v1.3_beta2.
Important information for new hardware release – Hardware version 1.1

Firmware and boot loader supports new flash ROMs -AT45DB641E(264Bytes/Page) and
AT45DB642-CNU-SL954(1024Bytes/Page)

Boot loader changes to v1.0.0.6 for above new Flash-ROM

The previous firmware and boot loader are restricted applied to new Hardware version v1.1 which
adopted above new flash ROMs - AT45DB642D-CNU-SL954, AT45DB641E.

■
New firmware and boot loader backward compatible with AT45DB642D-CNU (Hardware version v1.0)
Add CLI command- “show hardware flash” to display the page size of flash ROM, if the product label without
clearly hardware version number.
■
Add korenix‘s java sign
The following changes applied to firmware v1.2b:
■
Official release- Loop Protection present.
■
Clone from v1.2a.
The following changes applied to firmware v1.2a:
■
Enabled High Power over Ethernet up to 120W at 75°C environment
■
Add CLI commend check rule prevent caused wrong configuration.
■
Add IGMP IP Subnet Mask check rule.
The following changes applied to firmware v1.2:
■
Support IP v6 .
■
Web Saving function
■
New Ring events
■
DHCP Server

Port Based Fixed IP address DHCP server
Korenix Confidential Documents
Korenix JetNet 5310G Release Notes

Jun, 2014
Option 82
 Port Based DHCP- fixed IP address
 Assign IP address by Option 82 content.
 Relay Agent can be assign with Circuit-ID and Remote-ID

DHCP Server Relay w/option 82, Remote ID specified by
 MAC address
 IP address
 arbitrary strings
■
Change SSH key and SSL certification.
■
Enable/Disable Telnet and Http Service.
The following changes applied to firmware v1.1a:
■
■
Clone History

JetNet5310G-v1.1a_beta1 clones from JetNet5310G-v1.1

JetNet5310G-v1.1a clones from JetNet5310G-v1.1a_beta1
Add Radius Login function that user need perform authentication with radius server, and
obtain the permission of Switch’s port access.
Fixes for Known Faults
The following issue fixed and applies to version v1.3
■
Fix MSR issue when ring port setting at combo port #9 and #10. (#1126)
■
Fix MSTP configuration issue that CLI can’t show correct MSTP parameters.(#651, 652)
■
Fix JetView firmware upgrade without system announcement. (#658)
The following issue fixed and applies to version v1.2 / v1.2a

Fix Memory leakage issue when enable DHCP server with IGMP function.
The following issues fixed and applies to version V1.1
■
New release.
Known Restrictions or Limitation
■
When the GVRP leader port changed, the GVRP packet can’t not forward to exactly port.
(#47)
■
IGMP Query packet with wrong priority ID.(#67)
■
The GMRP table can’t auto learning and update when port changed. (#90)
■
After leader port removed, GVRP PACKET TX forwarding path does not change. (#96)
■
when perform Cold and Warm start, the time stamp can’t synchronize with internal clock,
even the clock have synchronized with SNTP server or local PC.(#117)
■
The system log and SMTP carried out wrong cold/warm start time-stamp; event the SNTP
function is enabled. (#136)
■
Set dual homing ports to LACP trunk or Static trunk with primary link status, but performs
Korenix Confidential Documents
Korenix JetNet 5310G Release Notes
Jun, 2014
CLI command to show the port status will get wrong information. (#201)
■
After removed and created LACP group, the trunk devices will get wrong aggregation
information and also effected the STP information. (#209)
■
Change the egress mode of VLAN tag in LACP trunk mode , the change can’t apply to
LACP port.(#212)
■
The remote system log with wrong time-stamp and can’t synchronize with system timer.
(#275)
■
The Rapid Dual Homing function does not support in Super Ring mode, only present in
Rapid Super Ring. (#307)
■
Sets Fast Ethernet port 1, 2 as LACP trunk group 1 and remove leader port, the recovery
time will take 30 seconds then the data start forwarding. (#353)
■
The NTP time synchronous function does not work if the original local time setting is later
than remote NTP server’s time, then the SNMP browser could not get exactly time value
back.( #407)
■
The Force Mode only supports 5 ports that caused Chipset hardware limitation. (#431)
Korenix Confidential Documents

Download Report