2-slot MTCA.4 DAQ System General Description: The 2-slot MTCA.4 DAQ System is ready to used a data acquisition system. The system is offered with different sets of boards and test software package including compiled firmware, Linux drivers and EPICS/DOOCS/GAMMA interface. There are 2 slots compliant with MTCA.4 specification and one AMC.1 single or double width. Typical application: • Beam diagnostic • Test equipment • Automation Industry • LLRF system On request the system can be equipped with a redundant AC power supply (slot available). EICSYS offers customization or extension of firmware / drivers / software according to customer needs. Front and rear view of 2-slot MTCA.4 DAQ Systems Specification subject to change without notice eicSys GmbH, Sylvesterallee 2, 22525 Hamburg Tel. +49 40-53339984; email: [email protected] www.eicsys.eu Basic Configuration MTCA.4 slots AMC-slot 1 EAMC-D102 / TAMC900 / SIS8300 AMC-slot 2 EAMC-D102 / TAMC900 / SIS8300 µRTM-slot 1 ERTM-RFI8-1.3GHz / SIS8900 µRTM-slot 1 ERTM-RFI8-1.3GHz / SIS8900 AMC.1 AMC-slot 3 CPU Concurrent Tech. double width, mid-size. Crate Manager Standard configuration 1GB Ethernet PCIe Gen.2 x4 switch Clock distribution AMC900, Clock distribution Module supports external timing interface (trigger, clock) connected via data lines on Ports 17-20 Timing Several available: FCLK, TCLKA and TCLKB are distributed to all AMC slots IEEE1588 receiver as option available types 10G interface SFP+ to ports 4-7, AMC slots 1&2 PCIe switch Power Supply AC: 95-240V 300W option: redundant power supply Firmware UniDAQ Firmware Package (as source code sold separately, Driver Linux, EPICS, DOOCS, GAMMA Ordering Information 2-slot crate – ECH-2S-MTCA.4 boards: please contact eicSys for the final configuration evaluation license available) Related Products EAMC-D102, ERTM-RFI8-1.3GHz, TAMC900 SIS8300, SIS8900 Ver. 19.05.14 Specification subject to change without notice eicSys GmbH, Sylvesterallee 2, 22525 Hamburg Tel. +49 40-53339984; email: [email protected] www.eicsys.eu