TSG 538 TR Specification Sheet

ENVIRONMENTAL
EQUIPMENT
TECHNICAL SPECIFICATIONS
TSG 538TR Stump Grinder
GENERAL
► Weight: 2204 #
► Length: 92.5”
► Height: 53.2”
► Width: 26.4”
► Width variable : 38.2”
► Ground Drive: Self-propelled with variable speed control and
automatic hill brake
► Operator Control: Console Controls mounted on swing-away
arm with a fully covered valve bank
► Swing Pivot Bearings: sliding bearings
TRACK DRIVE SYSTEM
► Tracks: rubber track 200x37x72
► Idlers: 3+3
► Track Drive Motors: hydraulic motor with negative brake
► High Speed: 2.8 mph
► Low Speed: 1.4 mph
► Ground Pressure: 0,3 kg/cmq
ENGINE
► Model: KOHLER CH 980
► Number of Cylinders: 2
► Maximum No Load RPM: 3800 rpm
► Gross HP at Maximum No Load RPM: 38 HP @ 3600
rpm
► Maximum Rated Torque: 55,8 lb.ft. @2800 rpm
► Cooling Medium: Unrestricted air flow
► Air Cleaner: Heavy duty, dual element, dry type
► Oil Filter: Spin-on type
► Fuel Tank Capacity: 4 gal.
► Electrical System: 12V (battery 12V/45Ah)
HYDRAULIC SYSTEM
► Oil Tank Capacity: 7 gal.
► Oil Filter: return filter 25 um
► Oil Type: ISO VG 46, CETOP RP 91 H Category HV, IN
51 524 cast 3-HVLP, Poclain 00552-13P
CUTTING WHEEL
► Wheel Diameter: 17.3”
► Wheel Thickness: 1/2”
► Cutting Wheel Bearings: double row ball bearing
► RPM: 1860 rpm
► Intermediate Belt: 3xbelt XPA-13x1380 Lw
► Drive Belt: 3xbelt XPA-13x2240 Lw
► Jackshaft Bearings: ball bearings
► Cutting Teeth: Greenteeth with tungsten carbide tips
► Cutter Teeth Quantity: 18
► Cutter Wheel Engagement: Electromagnetic clutch with the
“Quick Stop” brake system
CUTTING RANGE (WITHOUT REPOSITIONING)
► Below Ground Level: 15”
► Above Ground Level: 31.5”
► Cutting Width: 45”
► Forward – Backward: Unlimited
RADIO REMOTE CONTROL
► Remote Functions: E-stop, cutter wheel on-off, cutter wheel
up-down, slew left-right, track forward-backward, track
variable width, speed control
► Remote Display: no display
► Remote Range: 300’ (91.4 m)
ENVIRONMENTAL EQUIPMENT
CONTACT DETAILS
SOCIAL NETWORKING
Terex Environmental Equipment
1250 Commerce Drive
Farwell, Michigan 48622
USA
Become a Terex fan on Facebook by visiting
www.facebook.com/terexcorporation
Toll Free: 1-800-953-5532
Phone: 1-989-588-4295
Fax:
1-989-588-4827
E Mail: [email protected]
Website: www.terex.com/environmental-equipment
Check out Terex Videos on YouTube:
www.youtube.com/TerexEnviroEquip
CUSTOMER SERVICE
Technical Helpdesk Support
Tel: 1 (989) 339 2060
Customer Service Representative
Tel: 1 (989) 339 2062
The material in this document is for information only and is subject to change without notice.
Terex assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein. Due to continual product development we
reserve the right to change specifications without notice. Product performance figures given in this brochure are for guidance purposes only, this information does not
constitute an expressed or implied warranty or guarantee, but shows test examples. These results will vary depending on feed source and types of material being used.
Photographs are for illustrative purposes only, some or all of the machines in the illustrations may have been fitted with optional extras. Please check for details on optional extras.
Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights reserved.
Terex is a registered trademark of Trade Corporation in the USA and many other countries. ©2014 Terex Corporation.
©2014 Terex Corporation