LMCP Series Catalog Page

NEW!
LIGHTING CONTROLS
WATTSTOPPER LIGHTING INTEGRATOR PANELS WITH DIGITAL LIGHTING
MANAGEMENT DLM SUPPORT
LMCP SERIES
DESCRIPTION
The LMCP Series panel provides simple network-capable lighting
control enabling the automation of lighting functions throughout
an entire facility. The HDR relays in the panel can respond directly
to inputs from Digital Lighting Management (DLM) switches,
occupancy sensors, daylight sensors, and input modules.
FEATURES
• Standard single pole heavy duty relays UL and cUL listed for
both lighting and plug loads
• Availabe in interiors sized for 8,24, or 48 relays maximum
• LMCT -100 handheld Configuration tool recommended for setup
• Runs event-based schedule routines independently (does not
require BAS or Segment Manager)
• Supports astronomical, time- based, and photocell-based event
types
• Two free topology DLM Category 5e local networks for DLM
sensors, switches, and LMIO series input modules
• Additional power available for low voltage switiches or
accessories
• Qualifies for use in ARRA-funded projects
LENC-08-S
LMCP
SPECIFICATIONS
Input voltage
120/277 VAC 60 Hz, 120/347 VAC 60 Hz,
240 VAC 50 Hz
Secondary Class 2
Power Supply
LMCP48
Approvals
Weight
LMCP8
LMCP24
LMCP48
8 Relay Enclosure
24 Relay Enclosure
48 Relay Enclosure Warranty
11
30 Amps ballast @ 277V
20 Amps ballast @ 347V
20 Amps tungsten @ 120V
30 Amps resistive @ 347V
1.5 HP @ 120V
14,000 Amps with HDR Heavy Duty Relay
32 to 131°F (0 to 55°C)
5-95% RH noncondensing
NEMA 1
Surface (LENCxxS) or Flush (LENCxxF)
13"W x 10.5"H x 4.25"D
(33.02 x 26.67 x 10.79 cm)
14"W x 23.37"H x 4.25"D
(35.56 x 59.36 x 10.79 cm)
14"W x 35.75"H x 4.25"D
(35.56 x 90.81 x 10.79 cm)
UL and cUL Listed (E207852)
LIGHTING CONTROLS
24 VDC output, up to 250 mA across 2
RJ45 ports per local network
Local Network Segments Free-topology DLM local network
segments may include digital switches
and sensors
Category 5e cable, 150 ft. per DLM
device, up to 1,000 ft. total per local
network
Segment Network
Parameters
WattStopper LM-MSTP wire
Linear topology; 4000 ft. maximum per
segment
Network Connections
Terminals for connection to DLM segment
network (BACnet MS/TP)
Communication Protocol BACnet MS/TP
Accessory Power Available
LMCP8
800 mA @ 24 VDC
LMCP24
1000 mA @ 24 VDC
LMCP48
1000 mA @ 24 VDC
HDR Relays
Coil voltage, 24 VDC,
pulse ON and pulse OFF
Individually replaceable
Mechanically latched contacts
Relay Contact Ratings
SCCR
(short circuit current
rating)
Operating Temperature
Operating Humidity
Enclosure Rating
Enclosure Options
Dimensions
LMCP8
LMCP24
16 lb (7.3 kg)
30 lb (13.6 kg)
46 lb (20.9 kg)
20 lb (9.1 kg)
50 lb (22.7 kg)
66 lb (29.9 kg)
5 years
DIMENSIONS
MODEL
WIDTH
HEIGHT
ENCLOSURE
WIDTH
HEIGHT
DEPTH
8-relay
Interior
13" (33 cm)
10.5" (26.7 cm)
LENC8S
15.8" (40.1 cm)
16.6" (42.2 cm)
4.6" (11.7 cm)
LENC8F
17.1" (43.4 cm)
18.5" (47 cm)
4.6" (11.7 cm)
24-relay
Interior
14" (35.6 cm)
23.4" (59.4 cm)
LENC24S
24" (61 cm)
32" (81.3 cm)
4.6" (11.7 cm)
LENC24F
25.9" (65.8 cm)
33.4" (84.8 cm)
4.6" (11.7 cm)
48-relay
Interior
14" (35.6 cm)
35.8" (90.8 cm)
LENC48S
24" (61 cm)
44.5" (113 cm)
4.6" (11.7 cm)
LENC48F
25.9" (65.8 cm)
45.9" (116.6 cm)
4.6" (11.7 cm)
March 2014
WE MAKE IT EASY.
kele.com
888-397-5353 USA
613
NEW!
LIGHTING CONTROLS
WATTSTOPPER LIGHTING INTEGRATOR PANELS WITH DIGITAL LIGHTING
MANAGEMENT SUPPORT
LMCP SERIES
WIRING
LM10-301 Connection and Wiring Diagram
P115/277 wiring
(see installation instructions for additional voltages)
Watertight J Bo x
Local Network A or B
Occupancy
Sensor
Sensor Hood
115V AC Supply
Switch
LMPO-200
Sensor
277V AC Supply
LMIO-301
277
115
NEU
GND
277
115
NEU
LMRJ Cables
GND
Class 2 wiring
#20 AWG up to 250'
#18 AWG up to 1000'
To LMCP
DLM Panel Connection Diagram
To
Segment
Manager
or BAS
(optional)
Segment Network
Emergency Relay Wiring
(Fail-safe, bypassed operation)
To additional
LMCP Panels or
DLM Local
Networks (optional)
LM-MSTP Wire
Emergency
Lighting
Circuit
(linear topology twisted pair dataline)
Local Network A
Switch
Switch
N.C.
Contactor
Normal
Power
Sense
Line Voltage
HDR
Relay
Local Network B
Occupancy
Sensor
Typical of up to
48 loads
11
Line
Load
H
N
C
LMCP Panel
LMRJ Cables
ORDERING INFORMATION
INSTALLATION
LIGHITING CONTROLS
MODEL
LMCP8
LMCP24
LMCP48
IR Window
Panel Interior
IR Window
Power
On/Of f
BA T=
Sensor Configuratio n
Load Config (PnL)
Daylighting Confi g
Button Configuration
Dimming Configuratio n
Adjust Light Level
LMCP48 115/277 48HD 24EM
Home/
Main Menu
Select
Back
277
Example: LMCP48-115/277-48HD-24EM277
48 Relay capacity panel with 115/277 VAC, 48 HDR relays,
24 Emergency relays, 277VAC coil voltage
*Order enclosure separately.
Up
Left
Right/Next
Down
MODEL
LENC
LMCT-100
ACCESSORIES
PAGE
HDR
Mechanically latching relay with
5-pin plug-in connector, pilot contacts,
override switch 660
LMCT - 100 Digital Wireless Configuration tool
614
PANEL INTERIOR
Network-capable lighting control panel with maximum of 8 relay capacity*
Network-capable lighting control panel with maximum of 24 relay capacity*
Network-capable lighting control panel with maximum of 48 relay capacity*
VOLTAGE OPTIONS
115/277 With 115/277 VAC supply
115/347 With 115/347 VAC supply
240 With 240 VAC supply
NUMBER OF HDR RELAYS INSTALLED
Replace “XX” with number of HDR relays installed
XXHD
(max. of interior relay capacity)
NUMBER OF EMERGENCY RELAYS INSTALLED
Replace “XX” with number of UL924 fail-safe emergency relays installed
XXEM
(max. of 24 relays, not available for 8 relay capacity panels)
EMERGENCY RELAY COIL VOLTAGE
115 VAC coil voltage
115
240 VAC coil voltage
240
277 VAC coil voltage
277
347 VAC coil voltage
347
888-397-5353 USA
kele.com
LENC
ENCLOSURES
Lighting panel enclosure
ENCLOSURE TYPE / SIZE
08 8 relay capacity
24 24 relay capacity
48 48 relay capacity
PANEL TYPE
Flush mounted style
F
Surface mounted style
S
24
S
Example: LENC24S 24 relay surface mounted enclosure.
Enclosure sold separately.
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.
March 2014

Download Report