Q4 Idea+ 01 met Box en acc 2014 1

PRICE LIST NEWS 2013
01 Leg
Model Idea+
TECHNICAL FEAUTURES
H.73
DESK TOPS
Model Idea+
40
30mm thick, melamine particleboard (washable, scratch resistant and non-reflective); straight anti-shock ABS edges
2mm thick matched with the desktop;
steel tubular leg 40x40 mm lacquer with epoxy powders; adjustable and stability feet;
fixed beam 60x30mm lacquer with alu epoxy powders.
When ordering please specify the combination of finishes and options. Example: single desk with DH cabinet, 182x80,
Castiglia walnut finish with alu cabinet carcass and alu metal leg, Code CABN8140/NC+A+AA+NC (look at Model Idea+
finishes).
MODESTY PANEL + PANEL LEGS
The carcass is composed by sides, bottom, top and partition side. Sides, bottom and top are in melamine particleboard
18mm thick, scratch resistant, non-reflective and washable, anti-shock ABS edge 1,5mm thick. Partition side is in melamine
particleboard 18mm thick, scratch resistant, non-reflective and washable, paper edges. Box can be equipped with optional
shelf in melamine particleboard 18mm thick, scratch resistant, non-reflective and washable, paper edges. The shelf is
equipped with retractable supports which prevent flexion under load and allow movement in height every 32mm. The
carcass is equipped with 8 ABS height-adjustable feet. The bottom has 2 cable port 60mm diameter with ABS cap.
STORAGE COMPARTMENT
Box is equipped with 4 sliding doors in melamine particleboard 18mm thick, scratch resistant, non-reflective and washable,
anti-shock ABS edge 1,5mm thick. At least one door must be blocked to give stability to the Box. The sliding system is
composed by plastic guides in the upper and lower part, with wheels in the lower part that that ensure a quiet and easy
running, soft-closing included. Sliding doors are height-adjustable 3mm thanks to a wheel and are equipped with lock and 2
folding keys. ABS handles are recessed in the doors.
Cable managed Boxes are equipped with removable lift-up flaps made in extruded alluminium lacquer with epoxy powders.
Lift-up flaps rotate both sides thank to painted ABS hinges, thery are completely removable to easy manage wire inside the
Box. Under the lift-up flap a cable tray in pickled folded metal sheet lacquer with epoxy powders is fixed to support wires and
power sockets. Cables may pass from one compartment to the other of the Box and can exit laterally, in correspondence of
the sides, thanks to the hole of the hinges.
PEDESTALS
The carcass is composed by sides, bottom, top and back 18mm thick and shelves 25mm thick in melamine particleboard,
scratch resistant, non-reflective and washable, paper edges. Partition side is in melamine particleboard 18mm thick, scratch
resistant, non-reflective and washable, paper edges. The carcass is equipped with 5 ABS height-adjustable feet. Doors are
in melamine particleboard 18mm thick, scratch resistant, non-reflective and washable, anti-shock ABS edge 1,5mm thick.
They are equipped with lock and 2 folding keys. Soft-closing system available as an option.
The carcass of the pedestals are in melamine particleboard 18mm thick, matt, scratch resistant, non-reflective and washable, paper edges; the drawer fronts are in melamine particleboard 18mm thick, scratch resistant, non-reflective and washable, anti-shock ABS edge 1,5mm thick. the inner parts of the drawers are in melamine particleboard or (optional) in metal
painted with epoxy powders; both can be equipped with pen tray in plastic and/or metal dividers. The guides are in metal
with high sliding wheels with stop, to avoid the drawer comes out accidentally; they can have the “Soft-closing” mechanism
(as optional). Filing drawers run on double expansion guides and they are equipped with a pull out of frame made of pressed
plate 1,5mm thick, coated epoxy powders. All pedestals are equipped with lock and 2 folding keys to prevent accidents.
MEETING TABLES TOPS
30mm thick matt, scratch resistant, non-reflective and washable melamine particleboard; 2mm straight anti-shock ABS
edges
01 Leg
Model Idea+
47
Desk with Box
DESK 60CM D WITH BOX
W.
140-160-180
181,5
60
44
EUR
R/Hoogte instelb.
184 181,5 73
D.
H.
CODE
CABA6140
1099
+70
204 181,5 73
CABA6160
1109
+70
224 181,5 73
CABA6180
1119
+70
66
DESK 80CM D
with Box
W.
140-160-180
181,5
80
44
D.
H.
CODE
EUR
R/Hoogte instelb.
184 181,5 73
CABA8140
1083
+70
204 181,5 73
CABA8160
1099
+70
224 181,5 73
CABA8180
1114
+70
EUR
R/Hoogte instelb.
66
CONFIGURATION 2 DESKS 60CM D
with Box
22
W.
140-160-180
60
181,5
60
140-160-180
D.
H.
CODE
302 181,5 73
CABG6140
1.479
+140
342 181,5 73
CABG6160
1.497
+140
382 181,5 73
CABG6180
1.517
+140
66
CONFIGURATION 2 DESKS 80CM D
with Box
22
W.
140-160-180
D.
H.
66
CODE
EUR
R/Hoogte instelb.
302 181,5 73
CABG8140
1.444
+140
342 181,5 73
CABG8160
1.479
+140
382 181,5 73
CABG8180
1.505
+140
80
181,5
80
140-160-180
01 Leg
ROW OF TWO 60CM D DESKS
with Boxes
140-160-180
W.
140-160-180
44
44
66
H.
CODE
EUR
R/Hoogte instelb
368 181,5 73
CABH6140
1.846
408 181,5 73
CABH6160
1.863
+105
+105
448 181,5 73
CABH6180
1.879
+105
66
ROW OF TWO 80CM D DESKS
with Boxes
140-160-180
W.
140-160-180
44
181,5
80
44
66
D.
H.
CODE
EUR
R/Hoogte instelb
368 181,5 73
CABH8140
2.090
+105
408 181,5 73
CABH8160
2.125
+105
448 181,5 73
CABH8180
2.152
+105
66
BENCH 2 DESKS 60CM D
with Boxes
a rail/Screen is to be installed in the central gap
W.
181,5
140-160-180
66
44
181,5
60
60
3,8
D.
H.
CODE
EUR
R/Hoogte instelb
184 181,5 73
CABI6140
2.106
+70
204 181,5 73
CABI6160
2.125
+70
224 181,5 73
CABI6180
2.144
+70
BENCH 2 DESKS 80CM D
with Boxes
a rail/Screen is to be installed in the central gap
1400-1600-1800
660
800
EUR
R/Hoogte instelb
184 363
73
CABI8140
2.092
+70
204 363
73
CABI8160
2.128
+70
224 363
73
CABI8180
2.155
+70
W.
H.
W.
1815
440
1815
800
D.
H.
CODE
38
BENCH 2 DESKS 60CM D
with Boxes
a rail/Screen with lift-up flaps is to be installed in the central gap
181,5
44
181,5
140-160-180
66
Model Idea+
181,5
60
48
D.
60
21,5
60
D.
CODE
EUR
R/Hoogte instelb
184 363
73
CABL6140
2.125
+70
204 363
73
CABL6160
2.144
+70
224 363
73
CABL6180
2.163
+70
01 Leg
BENCH 2 DESKS 80CM D
with Boxes
a rail/Screen with lift-up flaps is to be installed in the central gap
140-160-180
66
80
21,5
80
D.
H.
CODE
EUR
R/Hoogte instelb.
184 363
73
CABL8140
2.112
+70
204 363
73
CABL8160
2.146
+70
224 363
73
CABL8180
2.173
+70
W.
H.
BENCH 4 DESKS 60CM D
with Boxes
a rail/Screen is to be installed in the central gap
140-160-180
140-160-180
44
D.
3,8
60
EUR
R/Hoogte instelb.
73
CABM6140
4.052
+105
408 363
73
CABM6160
4.089
+105
448 363
73
CABM6180
4.127
+105
W.
H.
181,5
66
CODE
368 363
60
181,5
44
66
BENCH 4 DESKS 80CM D
with Boxes
a rail/Screen is to be installed in the central gap
140-160-180 140-160-180
44
D.
80
3,8
EUR
R/Hoogte instelb.
73
CABM8140
4.007
+105
408 363
73
CABM8160
4.078
+105
448 363
73
CABM8180
4.132
+105
W.
H.
181,5
66
CODE
368 363
80
181,5
44
66
BENCH 4 DESKS 60CM D
with Boxes
a rail/Screen with lift-up flaps is to be installed in the central gap
140-160-180
140-160-180
44
D.
CODE
EUR
R/Hoogte instelb.
368 363
73
CACL6140
4.080
+105
408 363
73
CACL6160
4.118
+105
448 363
73
CACL6180
4.156
+105
W.
H.
181,5
60
21,5
60
181,5
44
66
66
BENCH 4 DESKS 80CM D
with Boxes
a rail/Screen with lift-up flaps is to be installed in the central gap
140-160-180 140-160-180
44
D.
CODE
EUR
R/Hoogte instelb.
368 363
73
CACL8140
4.036
+105
408 363
73
CACL8160
4.105
+105
448 363
73
CACL8180
4.160
+105
181,5
80
21,5
80
181,5
44
66
66
SEE ALSO…
Shared
Elements, Pag.
111
Storages, Pag.
131
Coffee Tables,
Pag. 149
49
Model Idea+
W.
181,5
44
181,5
01 Leg
Desk with cable managed Box
DESK 60CM D WITH CABLE MANAGED BOX
50
W.
140-160-180
181,5
D.
H.
CODE
EUR
R/Hoogte instelb.
184 181,5 73
CABB6140
1.276
+70
204 181,5 73
CABB6160
1.286
+70
224 181,5 73
CABB6180
1.295
+70
66
DESK 80CM D
with cable managed Box
W.
140-160-180
181,5
80
44
D.
H.
CODE
EUR
R/Hoogte instelb.
184 181,5 73
CABB8140
1.258
+70
204 181,5 73
CABB8160
1.276
+70
224 181,5 73
CABB8180
1.289
+70
66
CONFIGURATION 2 DESKS 60CM D
with cable managed Box
22
W.
140-160-180
60
181,5
60
140-160-180
D.
H.
CODE
EUR
R/Hoogte instelb.
302 181,5 73
CACD6140
1.654
+140
342 181,5 73
CACD6160
1.673
+140
382 181,5 73
CACD6180
1.693
+140
66
CONFIGURATION 2 DESKS 80CM D
with cable managed Box
22
W.
140-160-180
181,5
80
140-160-180
D.
H.
CODE
EUR
R/Hoogte instelb.
302 181,5 73
CACD8140
1.620
+140
342 181,5 73
CACD8160
1.654
+140
382 181,5 73
CACD8180
1.681
+140
80
66
ROW OF TWO 60CM D DESKS
with cable managed Boxes
140-160-180
44
W.
140-160-180
44
181,5
60
Model Idea+
60
44
66
D.
H.
CODE
CACE6140
2.484
+105
408 181,5 73
CACE6160
2.503
+105
448 181,5 73
CACE6180
2.522
+105
66
Storages, Pag.
131
R/Hoogte instelb.
368 181,5 73
SEE ALSO…
Shared
Elements, Pag.
111
EUR
Coffee Tables,
Pag. 149
01 Leg
ROW OF TWO 80CM D DESKS
with cable managed Boxes
W.
140-160-180
181,5
80
44
66
D.
H.
CODE
EUR
R/Hoogte instelb
368 181,5 73
CACE8140
2.441
+105
408 181,5 73
CACE8160
2.476
+105
448 181,5 73
CACE8180
2.503
+105
66
BENCH 2 DESKS 60CM D
with cable managed Boxes
a rail/Screen is to be installed in the central gap
W.
181,5
140-160-180
66
44
181,5
60
60
D.
H.
CODE
EUR
R/Hoogte instelb
184 363
73
CACF6140
2.457
+70
204 363
73
CACF6160
2.476
+70
224 363
73
CACF6180
2.495
+70
W.
H.
3,8
BENCH 2 DESKS 80CM D
with cable managed Boxes
a rail/Screen is to be installed in the central gap
181,5
140-160-180
66
44
181,5
80
80
D.
CODE
EUR
R/Hoogte instelb
184 363
73
CACF8140
2.443
+70
204 363
73
CACF8160
2.479
+70
224 363
73
CACF8180
2.506
+70
3,8
BENCH 2 DESKS 60CM D
with cable managed Boxes
a rail/Screen with lift-up flaps is to be installed in the central gap
W.
181,5
140-160-180
66
44
181,5
60
21,5
60
D.
H.
CODE
EUR
R/Hoogte instelb
184 363
73
CACH6140
2.476
+70
204 363
73
CACH6160
2.495
+70
224 363
73
CACH6180
2.514
+70
W.
H.
BENCH 2 DESKS 80CM D
with cable managed Boxes
a rail/Screen with lift-up flaps is to be installed in the central gap
181,5
140-160-180
66
44
181,5
80
21,5
80
D.
CODE
Storages, Pag.
131
R/Hoogte instelb
184 363
73
204 363
73
CACH8160
2.498
+70
224 363
73
CACH8180
2.525
+70
SEE ALSO…
Shared
Elements, Pag.
111
EUR
CACH8140
Coffee Tables,
Pag. 149
2.463
+70
51
Model Idea+
140-160-180
44
01 Leg
BENCH 4 DESKS 60CM D
with cable managed Boxes
a rail/Screen is to be installed in the central gap
44
W.
44
D.
H.
EUR
R/Hoogte instelb
73
CACI6140
4.754
204 363
73
CACI6160
4.792
+105
+105
224 363
73
CACI6180
4.831
+105
W.
H.
EUR
R/Hoogte instelb
66
BENCH 4 DESKS 80CM D
with cable managed Boxes
a rail/Screen is to be installed in the central gap
140-160-180 140-160-180
44
D.
CODE
368 363
73
CACI8140
4.709
+105
408 363
73
CACI8160
4.780
+105
448 363
73
CACI8180
4.834
+105
W.
H.
3,8
181,5
80
80
181,5
44
66
66
BENCH 4 DESKS 60CM D
with cable managed Boxes
a rail/Screen with lift-up flaps is to be installed in the central gap
140-160-180 140-160-180
44
D.
CODE
EUR
R/Hoogte instelb
368 363
73
CACM6140
4,783
+105
408 363
73
CACM6160
4.820
+105
448 363
73
CACM6180
4.858
+105
W.
H.
181,5
60
21,5
60
181,5
44
66
66
BENCH 4 DESKS 80CM D
with cable managed Boxes
a rail/Screen with lift-up flaps is to be installed in the central gap
140-160-180 140-160-180
44
D.
CODE
EUR
R/Hoogte instelb
368 363
73
CACM8140
4.738
+105
408 363
73
CACM8160
4.809
+105
448 363
73
CACM8180
4.863
+105
80
21,5
80
181,5
44
181,5
Model Idea+
66
CODE
184 363
181,5
60
60
3,8
181,5
52
140-160-180 140-160-180
66
66
SEE ALSO…
Shared
Elements, Pag.
111
Storages, Pag.
131
Coffee Tables,
Pag. 149
FINISHES
FRONTAL PANEL
FOR RAIL
CABLE MANAGEMENT
BOX LIFT-UP FLAP
OVERLAPPED UNIT BACK
BOX CUSHION
Shared Elements
102
MELAMINE
I
AA
G
A
BA
C
GLASS
FINISHING TOPS, DOORS,
DRAWER FRONTS, SLIDING
DOORS, CLOSING PROFILE
R
F
FABRIC
I
G
DH CABINETS/PEDESTAL
CARCASS, BOX PEDESTAL,
OVERLAPPED UNIT
C
R
I
FA
NO
GR
BA
CA
RR
NC
BA
AA
FINISHES
SCREEN
PO - POLYCARBONATE
T
BA
MT - METHACRYLATE
I
AA
ME - WOOD LOOK
MELAMINE
TS - FABRIC PLAIN
COLOUR
TF - FABRIC PATTERN
FA
N
GR
G
CA
B
NC
C
4
NO
R
5
RR
V
6
I
7
1
2
3
SCREEN: FRAME
A
Finishes
I
A
FA - beech
GR - grey
CA - cherry
NC - Castiglia walnut
NO - Canaletto walnut
BA - white
RR - light oak
A/AA - aluminium
N
B
G
C
R
I
V
A
- black
- blue
- grey melange
- light blue
- red
- white/beige
- green melange
- orange
1
2
3
4
5
6
7
- red rings
F - double face
- blue rings
frosted glass
- multicoloured rings S - frosted glass
- black rings
- black background
- beige background
- grey background
103
Shared Elements
ME - MELAMINE
SINGLE DESK WITH RAIL AND FRONTAL
PANEL
2
Shared Elements
104
1
1) rail with brackets
2) frontal panel for rail
SINGLE DESK WITH SCREEN
2
1
1) pair of brackets for Screen
2) Screen
DO NOT USE WITH 01 DESKS 80CM D
SINGLE DESK WITH RAIL, LIFT-UP
FLAP AND FRONTAL PANEL
2
1
1) rail with brackets, lift-up flap and cable tray for single desk
2) frontal panel for rail
SINGLE DESK WITH LIFT-UP FLAP
AND SCREEN
2
1
1) lift-up flap with brackets and cable tray for single desk
2) Screen
BENCH WITH RAIL AND FRONTAL
PANEL
2
BENCH WITH RAIL, LIFT-UP FLAP
AND FRONTAL PANEL
105
Shared Elements
2
1
1
1) rail with brackets
2) frontal panel for rail
1) rail with brackets, lift-up flaps and cable tray for bench
2) frontal panel for rail
BENCH WITH SCREEN
BENCH WITH LIFT-UP FLAPS AND
SCREEN
2
2
1
1
1) pair of brackets for Screen
2) Screen
1) lift-up flaps with brackets and cable tray for bench
2) Screen
BENCH WITH RAIL : SUPPORTS FOR LAMP LINEA BENCH MID STEM, LINEA BENCH
SIDE STEM AND STICK BENCH
1) rail with brackets for bench
2) rail linking support with brackets for lamp NyxbyKarboxx
Linea Bench
3) Lamp NyxbyKarboxx Linea Bench Side Stem
4) Lamp NyxbyKarboxx Linea Bench Mid Stem
5) rail linking support with brackets for lamp NyxbyKarboxx
Stick Bench
6) Lamp NyxbyKarboxx Linea Stick
Shared Elements
106
4
3
6
2
1
5
BENCH WITH RAIL AND FLIP-UP COVERS : SUPPORTS FOR LAMP LINEA BENCH
MID STEM, LINEA BENCH SIDE STEM AND STICK BENCH
1) rail with brackets, lift-up flaps and cable tray for bench
2) rail linking support with brackets for lamp NyxbyKarboxx Linea Bench
3) lamp NyxbyKarboxx Linea Bench Side Stem
4) lamp NyxbyKarboxx Linea Bench Mid Stem
5) rail linking support with brackets for lamp NyxbyKarboxx Stick Bench
6) lamp NyxbyKarboxx Linea Stick
4
3
6
2
1
5
1
N.B. LAMPS WITH SUPPORTS CAN
BE USED ONLY ON RAIL FOR
BENCH, NOT ON RAIL FOR SINGLE
DESK.
LAMPS: SEE PRICE LIST
BOX: CARCASS
66
181,5
3
56
2
5
2
6
5
1) bottom with guides for sliding doors
2) sides
3) partition side
4) top
5) sliding doors with lock and Soft-closing system
TGOCT M<"CV"NGCUV"QPG"FQQT"OWUV"DG"
DNQEMGF
6) cable ports for wire management
1
CABLE MANAGED BOX: CARCASS
Detail of the removable and
double-side opening
lift-up flap
8
4
7
66
2
5
2
6
5
1
181,5
56
3
1) bottom with guides for sliding doors
2) sides
3) partition side
4) top
5) sliding doors with lock and Soft-closing system
TGOCT M<"CV"NGCUV"QPG"FQQT"OWUV"DG"
DNQEMGF
6) cable ports for wire management
7) cable tray
8) removable double-side opening lift-up flap
Shared Elements
107
4
ACCESSORIES FOR BOX: PEDESTAL, SUPPORTING BEAMS, CUSHION, SHELF
3
Shared Elements
108
2
1
4
1) 3 drawers optional pedestal
2) optional supporting beams (MANDATORY TO LOAD WEIGHT)
3) optional cushion (always together with pedestal and supporting beams)
4) optional shelf
ACCESSORIES FOR CABLE MANAGED BOX: PEDESTAL
REMARK: DO NOT PLACE TOGETHER 2
PEDESTALS IN CORRESPONDENCE OF
THE CLOSING DOOR
1
1
1) 3 drawers optional pedestal
Vgejpkecn"hgcvwtgu"Ujctgf"Gng
o gpvu<
ECDNG"OCPCI GOGPV
Tckn"hqt"ukping"fgu
m"cpf"dgpej
Support brackets in pickled folded metal sheet 3mm thick lacquer with epoxy powders and fixed with screws to the rail and
under the desktop . Rail in extruded alluminium alloy lacquer with epoxy powders, finishing side caps in painted ABS.
Yktg"o cpcig o gpv
Cable tray for wire management in pickled folded metal sheet mm thick lacquer with epoxy powders and fixed with a
dedicated release system.
Ognco kpg"htqpvcn"
r cpgnu
Melamine particleboard 18mm thick, scratch resistant, non-reflective and washable, anti-shock ABS edge 2mm thick.
Support brackets in die-cast ZaMa fixed to the rail with nut hammer and screws, finishing caps in painted ABS fixed with
press-fit.
I ncuu"htqpvcn"
r cpgnu
Double-face frosted glass 6mm thick with smooth polished edges with bevel 1,5mm. Support brackets in die-cast ZaMa fixed
to the rail with nut hammer and screws, finishing caps in painted ABS fixed with press-fit. Spacers in transparent matt ABS.
Hcdtke"htqpvcn"
r cpgnu
Melamine particleboard 18 mm thick, scratch resistant, non-reflective and washable, anti-shock ABS edge 2mm thick.
Upholstery in fabric Trevira CS 100% polyester with hinge. Support brackets in die-cast ZaMa fixed to the rail with nut
hammer and screws, finishing caps in painted ABS fixed with press-fit.
Uetggp
Frame made in extruded anodized aluminium,dimension 38x38mm, each one linked through alluminium corners, epoxy
painted. Both sides of perimetrical frame have a rail for hooking different accessories both vertically and horizontally.
Screens are available on 5 materials:
- honeycomb panel 25mm thick in silver or white color melamine, scratch resistant, non-reflective and washable;
- honeycomb panel 25mm thick covered with fire-retardant fabric Trevira CS 100% polyester;
- polycarbonate 8mm thick, pinstriped, opal;
- methacrylate 4mm thick, opal color, no-reflecting.
- chipboard 8mm thick, melamine wooden matt, scratch resistant, non-reflective and washable.
Whenever polycarbonate and methacrylate are used, the frame is furnished with ABS gasket silver color.
DQZ
Ect ecuu
The carcass is composed by sides, bottom, top and partition side. Sides, bottom and top are in melamine particleboard
18mm thick, scratch resistant, non-reflective and washable, anti-shock ABS edge 1,5mm thick. Partition side is in melamine
particleboard 18 mm thick, scratch resistant, non-reflective and washable, paper edges. Box can be equipped with optional
shelf in melamine particleboard 18mm thick, scratch resistant, non-reflective and washable, paper edges. The shelf is
equipped with retractable supports which prevent flexion under load and allow movement in height every 32mm. The
carcass is equipped with 8 ABS height-adjustable feet. The bottom has 2 cable port 60mm diameter with ABS cap.
Unkfkpi"fqqtu
Box is equipped with 4 sliding doors in melamine particleboard 18mm thick, scratch resistant, non-reflective and washable,
anti-shock ABS edge 1,5mm thick. At least one door must be blocked to give stability to the Box. The sliding system is
composed by plastic guides in the upper and lower part, with wheels in the lower part that that ensure a quiet and easy
running, Soft-closing included. Sliding doors are height-adjustable 3mm thanks to a wheel and are equipped with lock and
2 folding keys. ABS handles are recessed in the doors.
109
Shared Elements
Tckn"ykvj"nkhv/w
r "hnc
r "hqt"ukping"fgu
m"cpf"dgpej
Support brackets in pickled folded metal sheet 3mm thick lacquer with epoxy powders and fixed with screws to the rail and
under the desktop. Rail in extruded alluminium alloy lacquer with epoxy powders, finishing side caps in painted ABS. Lift-up
flaps in extruded alluminium alloy lacquer with epoxy powders, finishing side caps in painted ABS fixed with screws. Softclosing mechanism with oil shocks in ABS, fixed with screws. Hinges for the lift-up flapsopening made of die-cast ZaMa alloy
fixed to the rail with screws.
Yktg"o cpcig o gpv
Cable managed Boxes are equipped with removable lift-up flaps made in extruded alluminium lacquer with epoxy
powders. Lift-up flaps rotate both sides thank to painted ABS hinges, thery are completely removable to easy manage wire
inside the Box. Under the lift-up flap a cable tray in pickled folded metal sheet lacquer with epoxy powders is fixed to
support wires and power sockets. Cables may pass from one compartment to the other of the Box and can exit laterally,
in correspondence of the sides, thanks to the hole of the hinges.
Shared Elements
110
Uwrr qtvkpi"dgco u
In case that 1/4 of the top of the Box is loaded more than 5 kg (uniformly distributed) or the Box is fixed to a desk/bench
with 60cm D desktops, a steel epoxy powder coated supporting beam is necessary under the top of the Box.
Ewujkqp
Cushion made in polyurethane foam pudding, upholstered with fire-retardant fabric Trevira CS 100% polyester. Cushion
is fixed to the Box with double-sided Velcro to be easily removed. Cushion need pedestal and supporting beams into the
Box to support weight.
FGUM/JGKI JV"*FJ +"ECDKPGVU"CPF"RGFGUVCNU
Fgum/jgkijv" ecdkpgvu
The carcass is composed by sides, bottom, top and back 18mm thick and shelves 25mm thick in melamine particleboard,
scratch resistant, non-reflective and washable, paper edges. Partition side is in melamine particleboard 18mm thick,
scratch resistant, non-reflective and washable, paper edges. The structure is equipped with 5 ABS height-adjustable feet.
Doors are in melamine particleboard 18mm thick, scratch resistant, non-reflective and washable, anti-shock ABS edge
1,5mm thick. They are equipped with lock and 2 folding keys. Soft-closing system available as an option.
Fgum/jgkijv" r gfguvcnu
The carcass of the pedestals are in melamine particleboard 18 mm thick, matt, scratch resistant, non-reflective and washable, paper edges; the drawer fronts are in melamine particleboard 18mm thick, scratch resistant, non-reflective and
washable, anti-shock ABS edge 1,5mm thick. The inner parts of the drawers are in melamine particleboard or (optional) in
metal painted with epoxy powders; both can be equipped with pen tray in plastic and/or metal dividers. The guides are in
metal with high sliding wheels with stop, to avoid the drawer comes out accidentally; they can have the “Soft-closing”
mechanism (as optional). Filing drawers run on double expansion guides and they are equipped with a pull out of frame
made of pressed plate mm 1.5 thick, coated epoxy powders. All pedestals are equipped with lock and 2 folding keys to
prevent accidents.
Hkpkujkpi"vq
ru
30mm thick matt, scratch resistant, non-reflective and washable melamine particleboard; 2mm straight anti-shock ABS
edges.
Qxgtncrr gf"uvqtcig"wpkv
The overlapped storage unit is composed by top and sides in melamine particleboard 18mm thick, scratch resistant, nonreflective and washable, anti-shock ABS edge 1,5mm thick, all corners have 1,5mm radius. The overlapped storage unit
can be equipped with a pickled folded metal sheet back lacquer with epoxy powders.
Cable management
Cable management and accessories
RAIL
for single desk/bench 30mm thick
D.
H.
120
3,8
3
SCBD3120
98
140
3,8
3
SCBD3140
104
160
3,8
3
SCBD3160
111
180
3,8
3
SCBD3180
118
111
W.
D.
H.
EUR
Shared Elements
CODE
EUR
W.
RAIL W/ LIFT-UP FLAPS AND CABLE TRAY
for bench 30mm thick
CODE
120 21,5
3
SCSB3120
350
140 21,5
3
SCSB3140
372
160 21,5
3
SCSB3160
393
180 21,5
3
SCSB3180
415
W.
H.
RAIL W/ LIFT-UP FLAP AND CABLE TRAY
for single desk 30mm thick
D.
CODE
EUR
3
SCSS3120
258
140 12,6
3
SCSS3140
272
160 12,6
3
SCSS3160
286
180 12,6
3
SCSS3180
300
W.
H.
120 12,6
LIFT-UP FLAPS WITH CABLE TRAY
for bench 30mm thick with Screen
D.
CODE
EUR
120 21,5
3
SCRB3120
341
140 21,5
3
SCRB3140
359
160 21,5
3
SCRB3160
376
180 21,5
3
SCRB3180
393
W.
H.
LIFT-UP FLAP WITH CABLE TRAY
for desk 30mm thick with Screen
D.
EUR
120 21,5
3
SCRS3120
140 21,5
3
SCRS3140
247
160 21,5
3
SCRS3160
260
3
SCRS3180
273
180 21,5
SEE ALSO…
CODE
233
Cable management
MELAMINE FRONTAL PANEL FOR RAIL
Shared Elements
112
W.
D.
H.
CODE
EUR
80
2
32
SCDVM080
99
100
2
32
SCDVM100
103
120
2
32
SCDVM120
107
140
2
32
SCDVM140
111
160
2
32
SCDVM160
115
SCDVM180
119
180
2
32
W.
D.
H.
FABRIC FRONTAL PANEL FOR RAIL
CODE
EUR
80
2
32
SCDVT080
152
100
2
32
SCDVT100
166
120
2
32
SCDVT120
178
140
2
32
SCDVT140
192
160
2
32
SCDVT160
206
180
2
32
SCDVT180
220
W.
D.
H.
80
0,6
32
SCDVV080
183
204
GLASS FRONTAL PANEL FOR RAIL
CODE
EUR
100
0,6
32
SCDVV100
120
0,6
32
SCDVV120
223
140
0,6
32
SCDVV140
244
264
285
160
0,6
32
SCDVV160
180
0,6
32
SCDVV180
W.
D.
H.
23
6
5
PCMPCE00
153
23
6
5
PCMPUK00
175
23
6
5
PCMPUS00
182
POWER SOCKET WITH DATA KIT
and 2m long data and power cables
CODE
EUR
SCHUKO (PCMPCE00), UK (PCMPUK00) or US (PCMPUS00)
RAIL LINKING SUPPORT WITH BRACKETS
for Linea Bench Side/Mid Stem lamp
W.
D.
H.
CODE
SCSUBE01
EUR
71
Available in white RAL9016 and alu RAL9006 finish; lamps: see pricelist NYXBYKARBOXX
SEE ALSO…
Cable management
RAIL LINKING SUPPORT WITH BRACKETS
for Stick lamp
W.
D.
H.
CODE
SCSUBE02
EUR
71
113
Shared Elements
Available in white RAL9016; lamps: see pricelist NYXBYKARBOXX
SEE ALSO…
Frontal Screens h.39 cm
FRONTAL SCREEN
melamine (alu AA and white BA)
Shared Elements
114
W.
D.
H.
80
4
39
CODE
PS1008C
EUR
206
100
4
39
PS1010C
218
120
4
39
PS1012C
230
140
4
39
PS1014C
245
160
4
39
PS1016C
256
180
4
39
PS1018C
270
W.
D.
H.
FRONTAL SCREEN
polycarbonate
CODE
EUR
80
4
39
PS2008C
233
100
4
39
PS2010C
249
120
4
39
PS2012C
263
140
4
39
PS2014C
282
160
4
39
PS2016C
294
180
4
39
PS2018C
314
W.
D.
H.
FRONTAL SCREEN
fabric
CODE
FABRIC PLAIN
COLOUR
FABRIC
PATTERN
80
4
39
PS3008C
248
292
100
4
39
PS3010C
267
311
120
4
39
PS3012C
287
331
140
4
39
PS3014C
308
355
160
4
39
PS3016C
325
371
180
4
39
PS3018C
348
392
W.
D.
H.
FRONTAL SCREEN
methacrylate
CODE
EUR
80
4
39
PS4008C
262
100
4
39
PS4010C
285
120
4
39
PS4012C
307
140
4
39
PS4014C
333
160
4
39
PS4016C
353
180
4
39
PS4018C
378
W.
D.
H.
FRONTAL SCREEN
wood-look melamine
SEE ALSO…
CODE
EUR
80
4
39
PS5008C
264
100
4
39
PS5010C
275
120
4
39
PS5012C
285
140
4
39
PS5014C
301
160
4
39
PS5016C
308
180
4
39
PS5018C
319
Frontal Screens h.39 cm
PAIR OF BRACKETS FOR SCREEN
W.
D.
H.
CODE
SCRD3000
EUR
37
Shared Elements
115
SEE ALSO…
Box
BOX
with sliding doors
66
181,5
W.
181,5
D.
H.
66
56
CODE
BS000140
EUR
722
CABLE MANAGED BOX
with sliding doors
181,5
66
Shared Elements
116
W.
181,5
D.
H.
66
56
D.
H.
CODE
BSEL0140
EUR
898
SHELF FOR BOX
W.
88
56
1,8
W.
D.
H.
42
56
48
W.
D.
H.
89
66
5
CODE
BSRPD001
EUR
51
PEDESTAL 3 DRAWERS FOR BOX
CODE
BSCS0001
EUR
334
PEDESTAL 3 DRAWERS FOR BOX
with cushion and supporting beams
SEE ALSO…
CODE
BSCS0002
EUR
462
Box
SUPPORTING BEAM FOR BOX
mandatory to load more than 5kg
(uniformly distributed)
W.
D.
H.
88
2
2
CODE
BSRNS001
EUR
32
PAIR OF SUPPORTING BEAMS FOR BOX
mandatory to load more than 10kgs
(uniformly distributed)
SEE ALSO…
W.
D.
H.
88
2
2
CODE
BSRND001
EUR
63
Shared Elements
117

Download Report