Download a Specification Sheet here

12mm Flexible LED Light Sheet
Flexible LED lighting on a plastic sheet delivering high
lumen output in a multitude of configurations suitable for
illumination applications and high brightness backlighting.
LEDs are spaced 12mm apart to deliver both good
uniformity for backlighting and enough light for base level
illumination. Features an L90 rating of >100,000 hr and
efficacy of 120 lm/W.
Product Ordering Codes
-
LS
G1
-
P12
-
DRF
-
-
Series
Rev
Pitch
Substrate
CCT
LS
G1
P12
DRF
K27
K30
K35
K40
K57
Category
Description
Series
Cooledge product type
Rev
Product revision
Pitch
LED spacing measured in mm
Substrate
Plastic sheet material and finish
Sxx
Nominal
Width
Length
(range listed)
Number
of strings
(range listed)
W036
W108
W216
L72-L6336
L72-L2304
L72-L1152
S2-S88
S2-S96
S2-S145
-
C15
Drive
Current
C15
LS - Light Sheet
G1 - Generation 1
P12 - 12mm (0.47”) Spacing
DRF - Diffuse Reflective Flexible
K27 - 2700K
K30 - 3000K
K35 - 3500K
K40 - 4000K
K57 - 5700K
Correlated color temperature
Width
Nominal width of active sheet area
measured in mm
Length
Length of individual sheet measured in mm
Strings
Number of individual electrical circuits
connecting LEDs
(Determines cut increments)
Current
Drive current to the LEDs measured in mA
Burnaby, BC Canada
-
Available Choices
CCT
CESS-0006-112714 1/3
-
W036 - nominal 36mm (1.4”)
W108 - nominal 108mm (4.3”)
W216 - nominal 216mm (8.5”)
for W036: L = 72mm-6336mm (2.8”- 249.4”)
for W108: L = 72mm-2304mm (2.8”- 90.7”)
for W216: L = 72mm-1152mm (2.8”- 45.4”)
Sxx - Number of strings (“xx”) is determined by
length. This value will be added by the factory and
will appear on product labels and order documents
|
C15 - 15mA
Munich, Germany
Unit 1 - 3751 North Fraser Way
Burnaby, BC Canada V5J 5G4
Phone (Toll Free): +1 844.455.4448
+1.604.682.2665
cooledgelighting.com
D
Dimensions
7mm W028 Model Shown
E
B
A
C
D
W036 Model Shown
E
Dimension
Reference
Description
W036
W108
W216
A
Nominal Width
Distance measured between each electrical bus
that powers the LEDs (active area)
36mm
(1.4”)
108mm
(4.3”)
216mm
(8.5”)
B
Overall Width
Distance measured between outside edges
of the plastic substrate
56mm
(2.2”)
128mm
(5.0”)
236mm
(9.3”)
C
Emitting Width
Distance measured between outside edges
of the LEDs
28mm
(1.1”)
100mm
(3.9”)
208mm
(8.2”)
D
Border
Distance from outside edge of plastic
substrate to outside edge of electrical bus
10mm
(0.4”)
10mm
(0.4”)
10mm
(0.4”)
E
Cut Increment
The smallest linear dimension of material
that may be cut from the sheet
72mm
(2.8”)
24mm
(0.9”)
12mm
(0.5”)
Shipped Length Calculation:
Due to the electrical layout of light sheet products, all lengths must correspond to a multiple of the cut increments
noted above.
Sheet Light Output and Power
Order Code
Light Output1 (lm/ft)
Light Output1 (lm/m)
Power2 (W/ft)
Power2 (W/m)
LS-G1-P12-DRF-Kxx-W036-xx
450
1,500
3.8
12.5
LS-G1-P12-DRF-Kxx-W108-xx
1,370
4,500
11.4
37.4
LS-G1-P12-DRF-Kxx-W216-xx
2,740
9,000
22.9
75.1
1. 3500K
2. Does not include driver
CESS-0006-112714 2/3
Burnaby, BC Canada
|
Munich, Germany
Unit 1 - 3751 North Fraser Way
Burnaby, BC Canada V5J 5G4
Phone (Toll Free): +1 844.455.4448
+1.604.682.2665
cooledgelighting.com
Photometrics
Distribution: Available CCTs: CRI: Color Uniformity: Lumen Maintenance*:
Efficacy: Dimming: Lambertian
2700K, 3000K, 3500K, 4000K, 5700K
>80 (Consult factory for more options)
3.5 SDCM (Consult factory for other options)
L90 > 100,000 hours
*projections based on LM-80 data & TM-21 calcs
120 lm/w
100% to 1% Continuous
Environmental
Input Voltage: 58VDC
Nominal Drive Current: 15mA
Power Supply: Requires Class 2 Power Supply
Operating Temperature: 0° to 40°C (32° to 104°F)
Location: Indoor, dry location only
Humidity: 85% max (non-condensing)
Power Supplies (Drivers)
Regulatory
Cooledge approved 90w/50w/30w
Constant Voltage (58V):
• 0 to 10V Dimming Control (1%-100%) (by others)
• UL 1310/8750 Recognized Class 2
UL 8750 (Recognized)
Mechanical
Warranty
TEM WA
RR
SYS
Y
NT
A
SY
5
TY
AN
CESS-0006-112714 3/3
R
A
Please refer to Application Note #EXT-0010
“Guidelines for Mounting Light Sheets”
R
E
5Y
Substrate: Polyethelene terephthalate (“PET”)
Mounting Options (supplied by others):
• Double-sided tape
• Acrylic Adhesive
• Mechanical Fasteners
5Y
EA
Electrical
S T E M WA R
R
5 Year Limited Warranty: Parts and
workmanship when used with a Cooledge
approved power supply.
Cooledge Lighting reserves the right to change materials or
modify the design of its product without notification as part of
the company’s continuing product improvement program.
Burnaby, BC Canada
|
Munich, Germany
Unit 1 - 3751 North Fraser Way
Burnaby, BC Canada V5J 5G4
Phone (Toll Free): +1 844.455.4448
+1.604.682.2665
cooledgelighting.com

Download Report