2 1 Product Name: F 3 4 5 6 7 Mounting Holes 0.125" Hole, 0.250" Pad ZX107HSMC-S Altera HSMC Mezzanine test board using Agilent Samtec LA Probe Product Description: Altera HSMC bus interface breakout adapter using Samtec QTH / QSH ( ASP-122952-01 and ASP-122953-01 ). 1.4" (36mm) ALL clocks are accessible via onboard IPEX connectors via standard 0402 SMD landing pads stuffing options. The IPEX stuffing options provides support for clock sourcing from Host, Mezzanine card, or external generator/scope for purpose of measurements, stimulus.. The D0 .. D3, PRSNTn , I2C, and JTAG signals are accessible via landing pads of 0402 SMD package’s footprint. - Designed in 6 layers PCBoard with improved signal integrity and crosstalk. - All traces are designed with 50 Ω Ohms trace impedance. 100 Ω Ohms differential signaling. - Accessible JTAG, D0, D1, D2, D3, D4 I2C-SCL, I2C_SDA signals via onboard 0402 SMD package footprint. - 3 Pin header – Accessing +12V, 3.3V and GND planes - GND test point for direct connection to inner GND planes / fills as well as Samtec connector’s center GND stub.. Mates with : Host Samtec Socket Samtec QSH090 (DP) , QTH090 (DP). Fully compatible with Altera HSMC standard QSH090 , ASP-122953-01 Mates wit HSMC Host interfacing with HSMC interface ASP-122953-01 ASP-122952-01. Host ZX107HSMC-S would be a mezzanine card to HSMC host or placed between Host and test board ( Mezzanine board ). 0.50mm (0.0197") High Speed connector JACK (J) D PLUG (P) ZX107HSMC-S Mezzanine Module P CLKIN0, CLKOUT0 JTAG (TCK, TMS_TDI, TDO) Accessible via 0402 SMD landing pads Standard IPEX MHF 35u gold plating receptacle Compatible with IPEX MHF, MHFII, Wieson , Hirose U.FL Part Number: 20279-001E on board. Mates with: MHF, MHF II, or similar – I-PEX part number: 20278-1 20351-1 20311-011 20308-1 20312-011 IPEX: IPEX connectors 0402 SMD Landing pads ZX00SMA-IPEX37-P N J7 CLKIN0 J8 CLKOUT0 Accessible via onboard IPEX connectors ZX107HSMC-S-X-X Package includes: HDR 0.1" ( 2.54mm) 0.1" (2.54mm) center, 0.025" SQ with 0.23" (6mm) post height Headers: Agilent LA Probe connector Description SMA-Jack to IPEX coax cable assembly SMA-Plug to IPEX coax cable assembly SEE PAGE 2 for listings of the signals 3.3V 12.0V GND Power Supply sources Part number ZX00SMA-IPEX37-J ZX00SMA-IPEX37-P -S -T see ordering information ZX00SMA-IPEX37-J Using Zebax ZX132DS breakout adapter, user may use any scope probe for testing. Agilent Samtec probe E5379A Agilent Probes: E5378A E5379A E5385A Pitch: Zebax offers the following cable assemblies complementing the ZX107HSMC-S-x-x: ZX107HSMC-SD Samtec Header QTH090 , ASP-122952-01 Interfacing to Host E 2.8" (71mm) 3.1"(79mm) OnBoard Smatec Socket (QSH090 ASP-122953-01) Mates with Mezzanine Cards Bringup, testing, emulation, development, modular design evaluations J3 C ZX107HSMC-S-x-x Board side View Application: D F 1.4" (36mm) Provides full access to ALL differential / single ended signals via onboard connectors designed to mate with Agilent Logic Analyzer Samtec probe, and Zebax Breakout adapters, ZX132. E 8 CLKOUT1P/N – CLKIN1P/N CLKOUT2P/N – CLKIN2P/N J9 J11 J10 J12 CLKOUT1 CLKIN1 CLKOUT2 CLKIN2 Accessible via onboard IPEX connectors: P: Positive N: Negative Ordering INFO: Part Number ZX107HSMC-S-X-X PRSNTn XCVR_TX[0..7]P/N – XCVR_RX[0..7]P/N J4 > I2C ( SCL SDA ) J7 Accessible 0402 SMD landing pads D0 .. D3 Accessible 0402 SMD landing pads IPEX-connectors LVDS_TX[0..7]P/N - LVDS_RX[0..7]P/N S : 0.2861"(7.264mm) height QTH ( Standard ) T: 0.4043" (10.269mm) height QTH > J10 CLKIN1 or CLKOUT1 -S & -T options mate with any height QSH connector and ASP-122953-01 B IPEX-connectors B LVDS_TX[8..16] – LVDS_RX[8..14]P/N J6 Note Single ended D40 .. D79 ALL ZEBAX products are RoHS compliant and Lead Free unless otherwise indicated. > J50p J49n options J5 Single ended D4 .. D39 J9 C J : Jack SMA to IPEX cable assembly P: Plug SMA to IPEX cable assembly CLKIN0 or CLKOUT0 J8 Part number Quantity Description ZX107HSMC-S-X-X 1 HSMC Mezzanine Module ZX00SMA-IPEX37-X 2 SMA to IPEX-37 cable assembly CLKIN2 or CLKOUT2 Note: 1- All Clocks are accessible via onboard IPEX connectors 2- All Altera HSMC signals from Host (J1) are connected to the daughter card connector J2. 3- PRSNTn, I2C, JTAG, D0..D3 signals are accessible via 0402 SMD landing pads. SPECIFIED DIMENSIONS ARE INCHES (mm). ROHS Compliant A ZX107HSMC-S Notice Samtec breakout adapter Agilent QTH QSH 090 HSMC single / differential signaling ALL ZEBAX TECHNOLOGIES DESIGN SPECIFICATIONS, DRAWINGS, PUBLICATIONS, AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, “MATERIALS”) ARE BEING PROVIDED “AS IS.” ZEBAX MAKES NO WARRANTIES, EXPRESSED, IMPLIED, STATUTORY, OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NO INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. Information furnished is believed to be accurate and reliable. However, Zebax Technologies assumes no responsibility for the consequences of use of such information or for any infringement of patents or other rights of third parties that may result from its use. Specifications mentioned in this publication are subject to change without notice. This publication replaces all other information previously supplied. Zebax Technologies products are not authorized as in life support devices or systems. 1 2 3 4 5 M. Marina 6 7 8 A 2 1 Product Name: F 3 R7H 0Ω 0402 SMD J7 CLKIN0-X CLKOUT0_S R9OH 0Ω 0402 SMD CLKOUT1P_S J9 CLKIO1N-X NO NO R12OH 0Ω 0402 SMD R11OS 0Ω 0402 SMD NC R12OS 0Ω 0402 SMD NC J3 NC J12 CLKIO2N-X R11IH 0Ω 0402 SMD CLKIN2P NO 1 2 3 NO R12IS 0Ω 0402 SMD CLKIN2P_S NO NO GND NC GND XCVR_TXN0 GND XCVR_TXN1 GND XCVR_TXN2 GND XCVR_TXN3 GND XCVR_TXN4 GND XCVR_TXN5 GND XCVR_TXN6 GND XCVR_TXN7 GND XCVR_RXN0 GND XCVR_RXN1 GND XCVR_RXN2 GND XCVR_RXN3 GND XCVR_RXN4 GND XCVR_RXN5 GND XCVR_RXN6 B GND XCVR_RXN7 GND NC GND NC GND CLKIN0-X ( J7 ) Pin Signal Signal Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 GND NC GND D0GND D1GND D2GND D3GND D4GND D5GND D6GND D7GND D8GND D9GND D10GND D11GND D12GND D13GND D14GND D15GND NC GND NC GND GND NC GND D0+ GND D1+ GND D2+ GND D3+ GND D4+ GND D5+ GND D6+ GND D7+ GND D8+ GND D9+ GND D10+ GND D11+ GND D12+ GND D13+ GND D14+ GND D15+ GND NC GND NC GND 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 79 GND NC GND NC NC NC GND GND NC NC NC: Not Connected 81 83 85 87 89 91 93 95 97 99 D16-CLK- D16-CLK+ GND NC GND NC NC NC GND GND NC NC D J5 J4 Assigned Assigned 12.0V GND 3.3V Pin CLKIO2P-X R12IH 0Ω 0402 SMD R11IS 0Ω 0402 SMD CLKIN2N_S NO CLKOUT2P NC J11 D E CLKIO1P-X R10IS 0Ω 0402 SMD CLKIN1N_S R11OH 0Ω 0402 SMD CLKIN2N NC R10IH 0Ω 0402 SMD R9IS 0Ω 0402 SMD CLKOUT2N_S NC R10OS 0Ω 0402 SMD CLKIN1N NO CLKOUT2N X CLKOUT0-X J10 R9IH 0Ω 0402 SMD CLKIN1N_S F Break signal path: R10OH 0Ω 0402 SMD NC CLKIN1N Typical SS signal connection using 0402 SMD Package NC CLKOUT1P NC R9OS 0Ω 0402 SMD E 8 R8S 0Ω 0402 SMD NC CLKOUT1N_S 7 NC J8 R7S 0Ω 0402 SMD CLKOUT1N 6 R8H 0Ω 0402 SMD CLKOUT0 NC CLKIN0_S 5 ZX107HSMC-S Altera HSMC Mezzanine test board using Agilent Samtec LA Probe Clock routing Clocks are routed using IPEX connectors for supporting various stuffing options, enabling Host / Mezzanine card driving the clocks or external stimulus. The RjS, RjH ( “NC” Normally Connected, “NO” Normally Open 0402 SMD package ) are clock routing stuffing options where j is the connector number and “S” for signal sourced from the Socket ( Mezzanine card ) whereas the “H” is for signal sourced from the Header ( Host ). CLKIN0 C 4 GND NC GND NC NC NC GND GND NC NC GND NC GND GND NC GND XCVR_TXP0 GND XCVR_TXP1 GND XCVR_TXP2 GND XCVR_TXP3 GND XCVR_TXP4 GND LVDS_TXN0_D6 GND LVDS_TXN1_D10 GND LVDS_TXN2_D14 GND LVDS_TXN3_D18 GND LVDS_TXN4_D22 GND LVDS_TXN5_D26 XCVR_TXP5 GND LVDS_TXN6_D30 GND GND XCVR_TXP6 LVDS_TXN7_D34 GND XCVR_TXP7 GND XCVR_RXP0 GND XCVR_RXP1 GND XCVR_RXP2 GND GND LVDS_RXN0_D7 GND LVDS_RXN1_D11 GND LVDS_RXN2_D15 GND LVDS_RXN3_D19 GND XCVR_RXP3 LVDS_RXN4_D23 XCVR_RXP4 LVDS_RXN5_D27 XCVR_RXP5 LVDS_RXN6_D31 XCVR_RXP6 LVDS_RXN7_D35 GND GND GND GND GND GND GND XCVR_RXP7 GND NC GND NC GND CLKOUT0-X ( J8 ) 80 82 84 86 88 90 92 94 96 98 100 Assigned Assigned GND NC GND NC NC NC GND GND NC NC J6 Pin Signal Signal Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 GND NC GND D0GND D1GND D2GND D3GND D4GND D5GND D6GND D7GND D8GND D9GND D10GND D11GND D120GND D13GND D14GND D15GND NC GND NC GND GND NC GND D0+ GND D1+ GND D2+ GND D3+ GND D4+ GND D5+ GND D6+ GND D7+ GND D8+ GND D9+ GND D10+ GND D11+ GND D12+ GND D13+ GND D14+ GND D15+ GND NC GND NC GND 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 Assigned Assigned GND NC GND GND NC GND LVDS_TXP0_D4 LVDS_TXN8_D42 LVDS_TXP1_D8 LVDS_TXN9_D46 LVDS_TXP2_D12 LVDS_TXN10_D50 GND GND GND GND GND GND LVDS_TXP3_D16 LVDS_TXN11_D54 LVDS_TXP4_D20 LVDS_TXN12_D58 LVDS_TXP5_D24 LVDS_TXN13_D62 LVDS_TXP6_D28 LVDS_TXN14_D66 GND GND GND GND GND GND GND GND LVDS_TXP7_D32 LVDS_TXN15_D70 LVDS_RXP0_D5 LVDS_TXN16_D74 LVDS_RXP1_D9 LVDS_RXN8_D43 LVDS_RXP2_D13 LVDS_RXN9_D47 GND GND GND GND GND GND GND LVDS_RXP3_D17 GND LVDS_RXP4_D21 GND LVDS_RXP5_D25 GND LVDS_RXP6_D29 GND LVDS_RXP7_D33 GND GND NC NC GND GND NC NC GND GND CLKIN1N(D39)-X or CLKIN1P(D37)-X CLKOUT1N(D38)-X 79 D16-CLK- D16-CLK+ 80 CLKOUT1P(D36)-X ( J9 ) ( J10 ) GND 81 GND GND 82 GND NC 83 NC NC 84 NC GND 85 GND GND 86 GND NC 87 NC NC 88 NC NC 89 NC NC 90 NC NC 91 NC NC 92 NC GND 93 GND GND 94 GND GND 95 GND GND 96 GND NC 97 NC NC 98 NC NC 99 NC NC 100 NC LVDS_xxxx_Dzz: LVDS_xxxx differential signal assignment, Dzz: Single endded signal CLKxxy(Dzz): Dzz is the single ended Data assiginment name Pin Signal Signal Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 GND NC GND D0GND D1GND D2GND D3GND D4GND D5GND D6GND D7GND D8GND D9GND D10GND D11GND D12GND D13GND D14GND D15GND NC GND NC GND GND NC GND D0+ GND D1+ GND D2+ GND D3+ GND D4+ GND D5+ GND D6+ GND D7+ GND D8+ GND D9+ GND D10+ GND D11+ GND D12+ GND D13+ GND D14+ GND D15+ GND NC GND NC GND 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 GND LVDS_RXN10_D51 GND LVDS_RXN11_D55 GND LVDS_RXN12_D59 GND LVDS_RXN13_D63 GND LVDS_RXN14_D67 GND NC GND NC GND CLKIN2N(D79)-X or CLKOUT2N(D78)-X 79 D16-CLK- D16-CLK+ 80 ( J11 ) GND 81 GND GND 82 NC 83 NC NC 84 GND 85 GND GND 86 NC 87 NC NC 88 NC 89 NC NC 90 NC 91 NC NC 92 GND 93 GND GND 94 GND 95 GND GND 96 NC 97 NC NC 98 NC 99 NC NC 100 LVDS_xxxx_Dzz: LVDS_xxxx differential signal assignment, Dzz: CLKxxy(Dzz): Dzz is the single ended Data assiginment name Assigned GND NC GND LVDS_TXP8_D40 GND LVDS_TXP9_D44 GND LVDS_TXP10_D48 GND LVDS_TXP11_D52 GND LVDS_TXP12_D56 GND LVDS_TXP13_D60 GND LVDS_TXP14_D64 GND LVDS_TXP15_D68 GND LVDS_TXP16_D72 GND LVDS_RXP8_D41 GND LVDS_RXP9_D45 GND LVDS_RXP10_D49 GND LVDS_RXP11_D53 GND LVDS_RXP12_D57 GND LVDS_RXP13_D61 GND LVDS_RXP14_D65 GND NC GND NC GND CLKIN2P(D77)-X or CLKOUT2P(D76)-X ( J12 ) GND NC GND NC NC NC GND GND NC NC Single endded signal C B Note ALL ZEBAX products are RoHS compliant and Lead Free unless otherwise indicated. SPECIFIED DIMENSIONS ARE INCHES (mm). ROHS Compliant A ZX107HSMC-S Notice Samtec breakout adapter Agilent QTH QSH 090 HSMC single / differential signaling ALL ZEBAX TECHNOLOGIES DESIGN SPECIFICATIONS, DRAWINGS, PUBLICATIONS, AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, “MATERIALS”) ARE BEING PROVIDED “AS IS.” ZEBAX MAKES NO WARRANTIES, EXPRESSED, IMPLIED, STATUTORY, OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NO INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. Information furnished is believed to be accurate and reliable. However, Zebax Technologies assumes no responsibility for the consequences of use of such information or for any infringement of patents or other rights of third parties that may result from its use. Specifications mentioned in this publication are subject to change without notice. This publication replaces all other information previously supplied. Zebax Technologies products are not authorized as in life support devices or systems. 1 2 3 4 5 M. Marina 6 7 8 A
© Copyright 2024 ExpyDoc
