MODEL 4000 DVB-C Digital to Analog CATV Set-top with Security MPEG 2 SD Digital to Analog-Digital CATV Set-top Converter with Embedded Security for CATV and MMDS The TVS MPEG-2 Standard -Definition digital to analog-digital (DTA-D) set-top provides the ability to convert digital channels to analog. The TVS DMS-1004SD-CA is designed as a cost-effective solution to manage the costs of digital migration. Operators and end users can install the ultra-low cost DTA-D in subscriber homes today where cost conscious operators and consumers need a reliable and cost effective digital upgrade. This Set-top works seamlessly with the TVS Headend systems without the need for an operator visit. The simple operation and ease of installation eliminates customer calls and questions. The Model 4000 is priced as a but has built-in advanced Multimedia performance set-top box that is fully compliant with MPEG-2 and DVB-C standards and features subtitle, conditional access (CA), EPG, and parental lock control to enrich the enjoyment of digital media. The unit can provide designed instant or scheduled program recordings. The TVS Model is compatible with major CAS systems. FEATURES & BENEFITS Small and Compact Standard-Definition Cable Receiver SD MPEG-2 SD With Dolby AC-3 Support Low Power Consumption & Reliable Supports the major Conditional Access Systems Analog A/V outputs with copy protection User-Friendly On-Screen Display and Guide Information Now/Next Program Information Parental Lock Function Supports Closed-Captioning Emergency Alert Support 70 Glenn Way, Suite 4 • San Carlos, CA 94070 • Phone (650) 508-8699 • Fax (650) 649-2264 [email protected] • www.transparentvideo.net FEATURES Fully DVB-C & MPEG-2 compliant 64 and 256 QAM 64 and 256 Annex B Auto Channel Update supported Supports OTC (Over the Cable Software upgrades) Friendly Electronic Program Guide Auto and manual Channel and Program Updates TUNER PVR Input Frequency: 50~860MHz Loop out frequency: 50~860MHz Input Level: 45dBuV ~ 85dBuV Input Impedance: 75ohm Parental Control supported Supports Major CAS Systems Support OSD/Mail addressable message Support DVB and SCTE-27 (for mer DigiCipher II) subtitles, Line 21 pass through Last channel memory USB Only AUDIO/VIDEO OUTPUT DEMULTIPLEXER POWER SUPPLY CHANNEL DECODING Standard: DVB-C EN300 429 Demodulation: QAM64, QAM256 US QAM ANNEX B CATV Modulation Standard:ISO/IEC13818-1 Input Max. Bit stream rate: 60Mbps (serial)/7.5MB/s(parallel). VIDEO DECODING Standard: ISO/ IEC13818-2MP@ML Aspect Ratio: 4:3,16:9 Video Format: NTSC Video Resolution: 720x480 Audio Decoding: MPEG-1 & MPEG-2 layer I/II, Dolby AC-3 Output Mode: Left, Right, and Stereo Sampling Frequency: 32, 44.1, 48KHz Volume Level: 24Levels Video Out :Composite, RCA x2 Video Output Impedance: 75 ohm Video Output Level: 1.0Vp-p ±0.2V Audio Output: Mono, Stereo, RCA L/R x2 Audio Output Frequency: 20Hz~20KHz Audio Output Impedance: 600 ohm Audio Output Level: 1KHz/0dB 2V±0.2V Digital Audio: S/P DIF RCA Input Voltage: 90-240VAC, 50/60Hz Power Consumption: 15W Max. GENERAL RS232 port USB V2.0 port Size(W*H*D): 260 * 45 * 175mm Weight(Net): 1.0 Kg RCU: RC-9500 IR (Carrier 38KHz) Battery: 2x1.5V AAA 70 Glenn Way, Suite 4 • San Carlos, CA 94070 • Phone (650) 508-8699 • Fax (650) 649-2264 [email protected] • www.transparentvideo.net ©2006 Transparent Video Systems
© Copyright 2024 ExpyDoc