SMP - Wavecontrol RF safety

SMP
Portable Measurement System
TECHNICAL DATA SHEET
ASSESSMENT
OF ELECTROMAGNETIC
RADIATION SOURCES
The SMP portable electromagnetic field measurement
system allows measurement of electromagnetic fields
generated by any source falling within the frequency
range of the probe attached to the device. Thus, fields
generated by sources such as mobile telephone base
stations,
radio
and
television
broadcasting
towers/repeaters, DECT systems, WiFi systems, etc. can
be measured.
Plus print out/report
MEETS INTERNATIONAL STANDARDS
allowing assessment, audit and certification of
telecommunication and industrial facilities.
PORTABLE AND EASY TO USE thanks to its
ergonomic design and weight of only 490 grams.
BUILT-IN GPS to georeference measurements
accurately at each certification site.
MEASUREMENT RANGE FROM 10 Hz TO 8 GHz
thanks to interchangeable probes.
INCLUDES DATA DOWNLOAD SOFTWARE
and carrying case for the device.
AUTONOMOUS OPERATION with a 10-hour internal
battery and memory for 64,000 registers.
APPLICATIONS
H
Telecommunications
Certification that EMF
levels emitted by
telecommunication
facilities meet standards.
Sensitive locations
Auditing of levels of EMF
radiation in hospitals,
schools and other
sensitive locations.
Designed in Barcelona by Wavecontrol
Power grids
Checking of electromagnetic
field levels generated by
power lines and transformer
stations.
Industry
Ensure that workers are
not exposed to high levels
of EMF radiation
(workplace safety).
Laboratories
Research centres and
audit firms.
[email protected]
www.wavecontrol.com
MEASUREMENT FUNCTIONS
COMPLEMENTS
Probes
Interchangeable; automatic detection of
probe type
Software
Program for downloading data
from SMP
Measurement units
V/m, kV/m, µW/cm2, mW/cm2, W/m2, uT, T, %
Accessories
Acquisition time
2 samples per second
Carrying case for 2 probes,
electronic calibration certificate,
USB cable, battery charger,
documentation in USB stick
Types of results
Total instantaneous value, on each axis
(X, Y, Z), maximum and minimum
Accessories
Carrying case for 3 probes, belt
case, printed calibration
certificate, wooden tripod
(non-reflective)
Types of average
Sliding window, arithmetic and normative
average in keeping with international standards.
Average intervals
10 s, 30 s, 1 min, 2 min, 5 min, 6 min, 10 min,
15 min, 30 min
Alarm
2400 Hz audible signal; adjustable threshold value
GENERAL SPECIFICATIONS
GPS
High-sensitivity with 20
independent tracking channels.
SiRF starIII GSC3
Battery
Internal rechargeable Li-ion
battery
Autonomy
> 10 hours (with GPS on)
> 14 hours (with GPS off)
Temp. range
-10 ºC to +45 ºC
Size (not
including probe)
100 x 215 x 40 mm
Weight (not
including probe)
490 g (including built-in GPS
receiver)
MEMORY
Configurable period
1 s, 5 s, 10 s, 30 s, 1 min, 5 min
Capacity
62,400 samples (no GPS data)
27,300 samples (with GPS data)
CONNECTIONS
Probe
Push-pull connector.
Automatic detection and recognition
Data downloading
Mini-USB connector
Firmware updating
Mini-USB connector
Battery charger
Coaxial jack connector + LED
SERVICES
Control Centre: transfer EMF measurements to an
Internet website with Google Map interface.
DISPLAY
Display type
Transmissive, monochrome, STN, negative
Size
60 x 78 mm (240 x 320 pixels)
Background
White LED
Display range
5 digits: 0.0001 to 99999
Included
Optional
Warranty Extension: the 2-year standard warranty
can be extended to 3, 4 or 5 years.
Calibration: plan future calibrations now for 2 and 4
years with further discounts.
Update Programme: keep the system up to date
with the latest firmware and software
developments.
Training courses: EMF theory and practical
sessions at Wavecontrol or the client’s offices.
RADIATION SOURCE
EMF radiation
Designed in Barcelona by Wavecontrol
EMF MEASUREMENT
REPORT
EMF sensor
EMF report
[email protected]
www.wavecontrol.com

Download Report