Spec Sheet - Raptor™ Nylon Pipe

PRODUCT OVERVIEW
RAPTOR™ nylon pipe is a thermoplastic homogenous single wall pipe made from INVISTA nylon 6,6 polymer.
APPLICATIONS
FLOW LINES
Pressures up to 500 PSI, Temperatures up to 200°F
•
•
•
•
•
Oils
Liquid Gas
Natural Gas
Hydrocarbons
Alcohols
•
•
•
•
LOW PRESSURE NATURAL GAS GATHERING
Pressures up to 500 PSI and better abrasion resistance compared
to steel and HDPE*
Solvents
Glycols
Aldehydes
Hot Water
WATER TRANSPORTATION
Pressures up to 500 PSI, Temperatures up to 200°F
•
•
•
Corrosion resistant thermoplastic
No cathodic protection needed
No de-rating for liquid hydrocarbons
KEY DIMENSIONS
RAPTOR™ NYLON PIPE COIL PRODUCTS
CONTACT INVISTA TO DISCUSS SPECIFIC APPLICATION NEEDS.
IPS (in.)
SDR
OD (in.)
AVERAGE ID (in.)
MINIMUM WALL (in.)
WEIGHT (lb./ft.)
COIL LENGTH (ft.)
2
11
2.375
1.917
0.216
0.72
2000
3
11
3.500
2.826
0.318
1.55
1000
3
9
3.500
2.675
0.389
1.85
1000
3
7
3.500
2.440
0.500
2.29
1000
4
11
4.500
3.633
0.409
2.57
1000
4
9
4.500
3.440
0.500
3.07
1000
4
7
4.500
3.137
0.643
3.79
600
6
11
6.625
5.349
0.602
5.57
300
6
9
6.625
5.065
0.736
6.64
300
6
7
6.625
4.619
0.946
8.22
300
*Tested against 3” .188 ERW A53/x42 steel and 4710 HDPE
The information provided in this document is for information purposes only and INVISTA disclaims any warranty relating to such information.
See INVISTA for warranty terms and conditions.
Standard Dimensions Ratio (SDR)=OD/MIN. WALL
Average ID = OD -2 x (Min. Wall x 1.06)
6” PIPE AVAILABLE Q4 2014
WHY NYLON?
• 2-5 times better than steel and more than 25 times better than HDPE
in abrasion resistance*
• Better impact resistance than fiberglass, HDPE and their composites
• Fast installation with coils
• Better resistance to static build-up compared with HDPE
• No cathodic protection necessary
• Transition fittings available
• Corrosion resistant
• Low expansion and contraction of pipe with temperature changes
• L ower thermal conductivity compared with steel and
HDPE, which may result in low paraffin build-up
• Joining process uses standard fusion equipment
*Tested against 3” .188 ERW A53/x42 steel and 4710 HDPE
PERFORMANCE
MAXIMUM WORKING PRESSURE
500
400
SDR7
SDR9
SDR11
PSI
300
200
100
73°
140°
180°
TEMPERATURE (°F)
•
•
•
•
•
•
Global vertically integrated producer of nylon 6,6 polymer
World’s largest producer of nylon 6,6 polymer and intermediates*
Operates in more than 20 countries with 10,000 employees
W holly owned, independently managed, subsidiary of Koch Industries, Inc.
Customer-focused product development approach
INVISTA supplies 60% of global ADN capacity, 40% of global HMD capacity
and 20% of global nylon 6,6 polymer capacity*
•
•
•
•
100,000 employees
Operates in 60 countries
$ 115 billion in revenue
$ 60 billion in acquisitions and other
capital investments since 2003
*According to 2013 PCI Nylon Yellowbook
RaptorNylonPipe.com
FOR MORE INFORMATION: [email protected] or 1-844-828-1330
The information provided in this document is for information purposes only and INVISTA disclaims any warranty relating to such information.
See INVISTA for warranty terms and conditions. The Koch logo is a trademark of Koch Industries, Inc. Raptor is a trademark of INVISTA. ©2014
September 2014
200°

Download Report