View the file. - Prime Design Technical Communications

VBB-TC11B ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
2
CONTENTS OVERVIEW
3
1
2
1—FBM-0006........................................................ (Qty 1)
Channels w/Hardware
Channels (2X)
End Caps (4X)
Brackets (4X)
M6 Locknut (8X)
M6 Washer (8X)
Connect Plate (8X)
M6 Bolt (8X)
2—Crossbar Assembly............................................ (Qty 2)
3—BRT-8201.......................................................... (Qty 4)
Ladder Stop Assembly, 1.75”
PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: 651-552-8554 ▪ 1.8.PRIME.RACK ▪ Fax: 651-552-1799 ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2014 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6,092,972, 6,099,231, 6,202,807, 6,427,889, 6,764,268, 6,971,563 AND OTHER PATENTS PENDING
FBM-0006
2.1
CHANNELS TO ROOF
1.1
Position Channels as
shown below in Fig.1
3
Install Channels into roof Channel groove as shown
Fro
nt
ft
Le
ht
Rig
Slide Channel Connectors
into Channels as shown
Install fasteners through
factory roof holes then
torque nuts to 80 in-lbs
2.2
1.2
Fig. 1
6.25”
5.00”
Channel Rear
Channel Front
4
Set to distances then torque Rear Bracket nuts to 90 in-lbs
Fro
nt
ft
Le
Fro
nt
ft
Le
ht
Rig
ht
Rig
Rea
r
Rea
r
60.00”
7.50”
Left Rear
7.50”
3
60.00”
Loosen bolts
Right Rear
PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: 651-552-8554 ▪ 1.8.PRIME.RACK ▪ Fax: 651-552-1799 ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2014 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6,092,972, 6,099,231, 6,202,807, 6,427,889, 6,764,268, 6,971,563 AND OTHER PATENTS PENDING
VBB-TC11B ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS
Rea
r
4
BASE ASSEMBLY
VBB-TC11B ASSEMBLY INSTRUCTIONS–BASE ASSEMBLY
2
1
CROSSBARS
CROSSBAR ADJUSTMENT
1.1
Fro
n
t
Even
Front
Even
Even
Rear
Even
Re
ar
Torque to
90 in-lbs
1.2
PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: 651-552-8554 ▪ 1.8.PRIME.RACK ▪ Fax: 651-552-1799 ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2014 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6,092,972, 6,099,231, 6,202,807, 6,427,889, 6,764,268, 6,971,563 AND OTHER PATENTS PENDING
Loosen nuts
6.1
Torque to 90 in-lbs
6.2
ADDITIONAL INFORMATION
For additional information regarding your VBB-TC11B Ladder Rack,
please visit the Prime Design Technical Communications website at:
http://pdtechcomm.com/us/
From your computer, click on the “Products“ tab on the toolbar, then
find your rack model according to your vehicle manufacturer, vehicle
model, then rack type.
Using a QR code reader in your smart phone or tablet, read the QR
Code shown below and follow the same steps as you would from your
laptop or computer.
If you’re viewing this document as an interactive PDF, you may simply
click on the QR Code below to access the Prime Design Technical
Communications website.
PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: 651-552-8554 ▪ 1.8.PRIME.RACK ▪ Fax: 651-552-1799 ▪ Email:[email protected] ▪ www.primedesign.net
TM & © 2014 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6,092,972, 6,099,231, 6,202,807, 6,427,889, 6,764,268, 6,971,563 AND OTHER PATENTS PENDING
VBB-TC11B ASSEMBLY INSTRUCTIONS–LADDER STOPS
5
LADDER STOPS
Page Intentionally Left Blank
Page Intentionally Left Blank
USAM-VBBTC11B-US01 Rev-A 0514

Download Report