Specialty Electronics For Emergency Vehicles, RV, Marine, Trucks Where extra power is essential... www.waiglobal.com Battery Isolators This series of products are utilized to eliminate the “battery drain” condition resulting from a multi-battery charging system. Transpo Battery Isolators are designed with the OEM style “open junction” press-fit diodes that feature the lowest amount of voltage drop between each battery post, achieving a cooler, more efficient operating system. If you are operating a multi-battery system, then you may choose from the 75, 100, 130, 165, 200 and 240 amp products. Negative Ground, 2-Batteries, 1-Alternator, 75 Amp Max. Alternator Output 2-75 Dim: 4.5 in. L x 4.55 in. W x 2.52 in. H (114mm L x 116mm W x 64mm H) 1/4-28 Terminals Features: Press-fit diodes, Welded connections 2-75A Negative Ground, 2-Batteries, 1-Alternator, 75 Amp Max. Alternator Output, Delco CS Series Alternators Dim: 4.5 in. L x 4.55 in. W x 2.52 in. H (114mm L x 116mm W x 64mm H) 1/4-28 Terminals Features: Press-fit diodes, Welded connections, Can be wired for sense, E-terminal for excitation function to voltage regulator 2-100 Negative Ground, 2-Batteries, 1-Alternator, 100 Amp Max. Alternator Output Dim: 4.5 in. L x 4.55 in. W x 2.52 in. H (114mm L x 116mm W x 64mm H 1/4-28 Terminals) Features: Press-fit diodes, Welded connections 2-100A Negative Ground, 2-Batteries, 1-Alternator, 100 Amp Max. Alternator Output, Delco CS Series Alternators Dim: 4.5 in. L x 4.55 in. W x 2.52 in. H (114mm L x 116mm W x 64mm H) 1/4-28 Terminals Features: Press-fit diodes, Welded connections, Can be wired for sense, E-terminal for excitation function to voltage regulator 2-130 Negative Ground, 2-Batteries, 1-Alternator, 130 Amp Max. Alternator Output Dim: 6.5 in. L x 4.55 in. W x 2.52 in. H (165mm L x 116mm W x 64mm H) 5/16-18 Terminals Features: Press-fit diodes, Welded connections 2-130A Negative Ground, 2-Batteries, 1-Alternator, 130 Amp Max. Alternator Output, Delco CS Series Alternators Dim: 6.5 in. L x 4.55 in. W x 2.52 in. H (165mm L x 116mm W x 64mm H) 5/16-18 Terminals Features: Press-fit diodes, Welded connections, Can be wired for sense, E-terminal for excitation function to voltage regulator Battery Isolators 2-165 Negative Ground, 2-Batteries, 1-Alternator, 165 Amp Max. Alternator Output Dim: 9.0 in. L x 4.55 in. W x 2.52 in. H (229mm L x 116mm W x 64mm H) 5/16-18 Terminals Features: Press-fit diodes, Welded connections 2-200 Negative Ground, 2-Batteries, 1-Alternator, 200 Amp Max. Alternator Output Dim: 12.5 in. L x 4.55 in. W x 2.52 in. H (318mm L x 116mm Wx 64mm H) 5/16-18 Terminals Features: Press-fit diodes, Welded connections 2-240 Negative Ground, 2-Batteries, 1-Alternator, 240 Amp Max. Alternator Output Dim: 12.5 in. L x 4.55 in. W x 2.52 in. H (318mm L x 116mm W x 64mm H) 3/8-16 Terminals Features: Press-fit diodes, Welded connections 3-130 Negative Ground, 3-Batteries, 1-Alternator, 130 Amp Max. Alternator Output Dim: 6.5 in. L x 4.55 in. W x 2.52 in. H (165mm L x 116mm W x 64mm H) 5/16-18 Terminals Features: Press-fit diodes, Welded connections 3-165 Negative Ground, 3-Batteries, 1-Alternator, 165 Amp Max. Alternator Output Dim: 9.0 in. L x 4.55 in. W x 2.52 in. H 9 (229mm L x 116mm W x 64mm H 5/16-18 Terminals Features: Press-fit diodes, Welded connections Miniature Battery Isolators Transpo Electronics is introducing the next generation of Battery Isolators designed to fit the restricted engine spaces while supplying the required power. Features: √ √ √ √ √ √ √ Dual battery sensing Fully automatic Surge protection Manual Model (rocker switch on the housing) Easy 3 wire connecting at the battery. No need to bypass existing alternator wiring LED indication Dimensions (mm): 67.5(L), 67.5(W), 53.5(H) Rocker switch to convert from standard (0) to manual (1) mode 2-12140B 2-24100C-2 Voltage regulators 911-02R Used On: Note: Features: 911-04 Used On: Note: Features: V1200 V2400 12 Volt, B-Circuit, 15.0 Voltage setting EMV, Industrial, Limo, Marine, Police Car, RV, Taxi Applications Terminal ID: IGN-NEG-FLD Self current limiting to protect against intermittent short circuit Load dump protection against abrupt full load to no load Extra filter networks to protect against voltage spikes Adjustable voltage with potentiometer positioned to protect against tAmpering Reverse polarity protection Epoxy encapsulated to protect against moisture and vibration Positive or negative ground system compatibility All connections to external terminal All silicon transistor design complies with federal specifications Certified burn-in cycle qualified Adjustable voltage (14-20V) Compatible with 8A rotors Remote mount potentiometer 12 Volt, B-Circuit, 15.0 Voltage setting EMV, Industrial, Limo, Marine, Police Car, RV, Taxi Applications Terminal ID: IGN-NEG-FLD Self current limiting to protect against intermittent short circuit Load dump protection against abrupt full load to no load Extra filter networks to protect against voltage spikes Adjustable voltage (13.0V-15.5V) with potentiometer positioned to protect against tempering Reverse polarity protection Epoxy encapsulated to protect against moisture and vibration Positive or negative ground system compatibility All connections to external terminal All silicon transistor design complies with federal specifications Certified burn-in cycle qualified Adjustable voltage (13.0-15.5V) Compatible with 8A rotors Stator activated 12 Volt, B-Circuit, 14.2 Voltage setting 24 Volt, B-Circuit, 27.5 Voltage setting Used On: Note: EMV, Industrial, Limo, Marine, Police Car, RV, Taxi Applications For 24 volt version use V2400. Features: Voyager Series Regulator Adjustable voltage (13.0-16.0V) Precise digital regulation Short-circuit protected High current capability Over voltage protection Ignition or light circuit activated with high side regulation (B-circuit) Protected against loss of ground and under voltage LED’s for easy troubleshooting Fault detection indicators V1210 For: Used On: Replaces: Terminal ID: Features: 12 Volt, B-Circuit, 14.2 Voltage setting Ford 1G Series ER/EF Alternators Ford Applications subject to severe duty, extreme temperatures, voltage spikes or dirty environment Ford D9PZ-10316-A, E2PZ-10316-A, F0AZ-10316-A, F0PZ-10316-A, E4AZ10316-B, GR-540-A, GR-540-B, GR-803 I Light, A B+, S Stator, F Field, Case B-. Voyager Series Regulator Adjustable Voltage (13.0-16.0V) Field rating 10 Amps Chrome Case Voltage Regulators V1300 Used On: Note: Features: V1700 Used On: Features: 12 Volt, B-Circuit, 14.2 Voltage setting EMV, Industrial, Limo, Marine, Police Car, RV, Taxi Applications Same as V1200 but with under voltage warning light. Voyager Series Regulator Adjustable voltage Precise digital regulation Short-circuit protected High current capability Over voltage protection Ignition or light circuit activated with high side regulation (B-circuit) Protected against loss of ground and under voltage LED’s for easy troubleshooting Fault detection indicators 12 Volt, B-Circuit, 14.2 Voltage setting EMV, Industrial, Limo, Marine, Police Car, RV, Taxi Applications Transpo Voyager Series Regulator Adjustable voltage Precise digital regulation Short-circuit protected High current capability Over voltage protection Ignition or light circuit activated with high side regulation (B-circuit) Protected against loss of ground and under voltage Voltage Reducers Transpo Electronics offers a wide range of DC-DC voltage reducers that are designed with the latest thick-film technology that can withstand the harsh environment and your demanding electrical loads and sensitive electronic devices. These products are rugged, reliable and ready to deliver the necessary precision to your auxiliary requirements without creating additional heat to your system. If your operating system is 24 volts and needs power for 12 volts auxiliary equipment, then you may choose from the 28, 52, 96, 144, 192, 240 and 288 watt products. VR24-1202 For: Dim: Features: VR24-1204 For: Dim: Features: VR24-1208 For: Dim: Features: 28 Watts 24V DC Charging Systems requiring 12V DC Accessory Power for Lights, Radio, Cell-Phone, etc. 5.0 in. L x 3.8 in. W x 1.0 in. H 127mm L x 97mm W x 25mm H Single circuit 28 watts, 13.8 volt set point, 2.0 Amp peak, 2.0 Amp continuous 52 Watts 24V DC Charging Systems requiring 12V DC Accessory Power for Lights, Radio, Cell-Phone, etc. 5.1 in. L x 4.7 in. W x 2.6 in. H 130mm L x 121mm W x 67mm H Single circuit 52 watts, 13.8 volt set point, 6.5 Amp peak, 4.3 Amp continuous 96 Watts 24V DC Charging Systems requiring 12V DC Accessory Power for Lights, Radio, Cell-Phone, etc. 6.1 in. L x 4.7 in. W x 2.6 in. H 155mm L x 121mm W x 67mm H Single circuit 96 watts, 13.8 volt set point, 11.0 Amp peak, 8.0 Amp continuous Voltage Reducers VR24-1212 For: Dim: 24V DC Charging Systems requiring 12V DC Accessory Power for Lights, Radio, Cell-Phone, etc. 8.7 in. L x 4.7 in. W x 2.6 H (220mm L x 121mm W x 67mm H) Features: Single circuit 144 watts, 13.8 volt set point, 16.0 Amp peak, 12.0 Amp continuous VR24-1216 For: Dim: Features: VR24-1220 For: BRAZIL WAIglobal Brazil Ltda Av. Coronel Marcos Konder, 1207-Sala 70 88.301-303, Itajai-SC Fone/Fax: (47)3046.1600 24V DC Charging Systems requiring 12V DC Accessory Power for Lights, Radio, Cell-Phone, etc. 11.4 in. L x 4.7 in. W x 2.6 in. H 290mm L x 121mm W x 67mm H Single circuit 192 watts, 13.8 volt set point, 20.0 Amp peak, 16.0 Amp continuous 240 Watts Dim: Features: Single circuit 240 watts, 13.8 volt set point, 26.0 Amp peak, 20.0 Amp continuous For: WAIglobal USA 411 Eagleview Blvd., Suite 100, Exton, PA 19341 Tel: 484.875.6600 Toll Free: 800.877.3340 Fax: 800.948.6121 192 Watts 24V DC Charging Systems requiring 12V DC Accessory Power for Lights, Radio, Cell-Phone, etc. 14.2 in. L x 4.7 in. W x 2.6 in. H (360mm L x 121mm W x 67mm H) VR24-1224 USA 144 Watts 288 Watts Dim: 24V DC Charging Systems requiring 12V DC Accessory Power for Lights, Radio, Cell-Phone, etc. 19.2 in. L x 4.7 in. W x 2.6 in. H (488mm L x 121mm W x 67mm H) Features: Single circuit 288 watts, 13.8 volt set point, 30.0 Amp peak, 24.0 Amp continuous CANADA EUROPE Toronto 34 Alex Avenue Vaughan, Ontario L4L 5X1 Tel: 416.740.9200 Toll Free: 800.387.2807 Fax: 416.740.5348 CHINA Montréal 4711 Boul. Couture Montréal (St-Léonard), Québec, H1R 3H7 Tel: 514.324.7922 Toll Free: 800.661.2962 Fax: 514.328.1535 WAI Europe b.v. Klappolder 225 2665 MR Bleiswijk The Netherlands Tel: 31(0)10.524.1980 Fax: 31(0)10.524.1981 Transpo Electronics, Shanghai, LTD Building No. 32 215 De Bao Rd Wai Gao Qiao Free Trade Zone Pudong, Shanghai 200131 Peoples Republic of China Tel: 86.21.5048.2700 Fax: 86.21.5048.2722 www.waiglobal.com 87-EVB-12A
© Copyright 2025 ExpyDoc