Date: 5th July 2014 Reference No.: COEP/MED/AICTE/RPS/GNK/2014-15 Due Date: 12/07/2014 Tender 1 For one of their funded research projects Department of Mechanical Engineering, College of Engineering Pune invite sealed Quotations for the following material subject to conditions listed below. Tracking mechanism of heliostats has been designed and manufactured. The following supply of goods involves installation and commissioning of tracking controls and enclosure on the existing mechanism. Sr. No. 1 2 3 Material Specification Absolute rotary encoders with environmental protection enclosure (to be installed and commissioned on the existing tracking system of a single heliostat) Assembly language software development for total system control (to be developed tested and delivered for the existing tracking control system of a single heliostat) MS powder coated IP 65 enclosure with motor protection switchgear , operator controls display etc., with system installation and commissioning (to be installed and commissioned on the existing tracking system and its controls for a single heliostat) Approx. Quantity Two One One 1. The taxes with D/AF form, insurance, freight, packing and forwarding charges if any must be mentioned separately 2. The material will be checked at this Institute. The Institute will not pay any charges for the rejected material. The amount spent for getting the replacement for the rejected material will be recovered from the supplier 3. The validity and delivery period should be stated clearly 4. Quotations should be addressed to the Director, College of Engineering Pune 5. Quotations should be sent in sealed envelopes, mentioning clearly the above mentioned reference number and Due date 6. Quotations should be sent to Mechanical Engineering Department, College of Engineering Pune, Wellesley Road, Shivaji Nagar Pune – 411005 7. The Make, Model/Type must be mentioned wherever applicable 8. For any query in this regard Contact Prof. G. N. Kulkarni, Mechanical Engineering Department, Ph.: 25507231 Email: [email protected] Date: 5th July 2014 Tender 2 Reference No.: COEP/MED/ECM-NCES/2014-15 Due Date: 12/07/2014 For their Energy conservation and Nonconventional Energy Sources Laboratory Department of Mechanical Engineering, College of Engineering Pune invite sealed Quotations for the following material subject to conditions listed below. Sr. Name of the equipment No. 1 Installation of three additional electric geysers in the existing test set up conducting Energy Audit of electric geysers simultaneously as follows 3 star rating geyser 4 star rating geyser No star rating geyser 2 Variable frequency drive 5 HP capacity with software and control panel to be installed in the test set up for conducting Energy audit of centrifugal pumps of rating 1 HP to 5 HP consumption Nos. required One One One One . Specifications Electric geysers – 3 Nos. Capacity – 25 liters cold water tank – 100 liters Piping electrical connections with control panel and safety arrangement on the existing set up 5 HP rating with related software and hardware and control 9. The taxes with D/AF form, insurance, freight, packing and forwarding charges if any must be mentioned separately 10. The material will be checked at this Institute. The Institute will not pay any charges for the rejected material. The amount spent for getting the replacement for the rejected material will be recovered from the supplier 11. The validity and delivery period should be stated clearly 12. Quotations should be addressed to the Director, College of Engineering Pune 13. Quotations should be sent in sealed envelopes, mentioning clearly the above mentioned reference number and Due date 14. Quotations should be sent to Mechanical Engineering Department, College of Engineering Pune, Wellesley Road, Shivaji Nagar Pune – 411005 15. The Make, Model/Type must be mentioned wherever applicable 16. For any query in this regard Contact Prof. G. N. Kulkarni, Mechanical Engineering Department, Ph.: 25507231 Email: [email protected] Date: 5th July 2014